[TV@Master] Fly like a bird with tv@anywhere Master (finally a great sofware!!!)

Finally!
After hours and hours of searching a good software for tv@anywhere master, trying of new drivers (didn't work - only color noise) - I grabbed my original installation CD with ancient drivers (setupdrv.exe dated 22.5.2003!!!) and installed the FLY2000TV (30-day trial).
Voila!!!!
Great picture on my 39 catv programmes, noise reduction, great deinterlacing, separate controls for each channel, etc. - perfect russian job!
MOREOVER - the FM radio works great too! (forget about that crappy MSI radio app.)
All of you folks crying for a great soft - erase your MSI PVS and go for FLY2000TV!
AND! your tiny cute remote control is supported as well! But also Winamp and system shut down (3-function) using MSIremote application written by a great man. Grab it! http://major.aspweb.cz/
QDI i865 PEMA mainboard
i Pentium 4 2.8 GHz/533 FSB
512 MB DDRAM
Hitachi 80 GB hdd
Sony combo drive+LG dvd
SB Live value
nVidia fx5200 64bit 128MB
MSI tv@nywhere master

-> alexcad
Great! This really works for me!
But how can i get teletext? The software on the installatincd don't work with FLY2000TV...

Similar Messages

Drop shadow from one master appearing on a page with a different master CS5

I have a series of curriculum books that make use of two different page styles controlled by two masters. On occasion in the books, the two masters appear side by side in a spread. Both masters contain similar background graphics but one has more side margin than the other. In the instance where the side margin appears on the left hand page, the drop shadow from a background element on the full page master appears on the bigger margin page. The actual object that has the shadow is not there, but the shadow is. This only happens when the margin is on the left; the shadow does not appear when the masters are side by side in a spread and the wide margin is on the right. See attached image.
I can split the pages apart and the shadow goes away, but this gets to be a pain when text reflows and I have to change the pages around. Any idea how I can keep this ghosted effect from appearing where it isn't supposed to be?
I'm on CS5 on an Intel Mac running Leopard.
Thanks.

Lots of cross posting...
Check the position of the edge of the cropped frame. I had a problem when it wasn't dead on the spine and the frame had the shadow applied...
Further investigation pasting the shadowed frame into another and cropping that reproduces your error, but good news, I think. If you select the cropped frame and pick a proxy point that is supposed to be on the spine, then subtract an infinitesimal amount, like .0001 from the x coordinate to move it left, or add the same if you need to move the right half right, ID will round the result back to the original dimension, but the ghost will disappear.
At least it seems to work for me on two-page lettersize spreads working with rulers in inches.
I think this is a bug, and I think we've discussed it before and I stumbled on the same solution last time.

Gooood News For Anyone Whose Has Problem with tv anywhere master

Hi Hi Hi! This is my first post here. After reading most the threads here related to the problem we all have for this card. I have spend over $300 CAD more to upgrade my video card and added more ram, guess what, same thing happen. Before I go on, I like to say. DO NOT BOTHER TO USE THE MSIPVR SOFTWARE NO MATTER WHICH VERSION. it's used alot of cpu power and slow down your system. Because of this, I decided to risk my system and downloaded many software outthere that related to the pvr software. None of them works well. Trust me, I have tried them all. If you want to have a good recording and better video and good functions and the best of all, it's use less cpu power. With Msipvr my cpu usage gone to the roof with 1 gig of ram, with this software it only use 60-70%. Now go download a program called Powervcr II v3 by Cyberlink, Very important ,while you at it download a patch too. without the patch, you will get error saying Unable To Render Preview Video Stream when you hit the record botton. Trust me, I think you all will like it. I just finished burning a dvd and the video are so much better then Msi one and anyone outhere. Hope this help you guys out. Give a try
Thanks
Anchim
My sys
p4 2gig
was on board video, now Ati 256 mb 9250 video card
1 gig ram
40 gig hd
[Post edited by Glenn]

Hello mate, I had a similar problem with my K7N2 ILSR, XP3200+, 1 Gig and a GeForce Ti4400...after trying everything I could think of for a few months I eventually upgraded my graphics to a GeForce 6800GT and...same problem! After reading another 1000 or so forums I eventually came up with going in to the bios and changing the CPU core voltage from auto to 1.55v which made a lot of difference and then added a couple more silent case fans (4 in total - 1 inlet 3 exhaust) and it's never crashed since.
Not saying this will work for you but it could be worth a try
Cheers

TV anywhere master: remote don't work, radio program will not run

Hi
I hope someone can help
A new pc with TV anywhere Master...
Specks
here http://www.esmannoglundsteen.dk/Report.htm
Tv works fine
1: remote vwill not work!
2: Radio program keeps chrashing after install, meaning it installs fine, but when I try to run it it stops and then " do you want to file an errorreport to microsoft" - I did dl the new version!
Thanks in advance
Kind regards
Morten Lundsteen
Denmark

Quote from: Dr Stu on 05-July-05, 05:24:01
more questions!
why do you use the cd analog audio lead? if you are using Windows 98SE or late, windows supports Digital Audio Extraction, whereby it reads CD audio data digitally through IDE connection, so you can throw that darn silly grey wire away now
are you using a USB card or bracket? they are moveable, you know
you say you press the FM button to start the radio program. what happens if you manually launch the radio player yourself?
Hi Dr Stu
About the CD analog audio lead: Ohh no if you knew how much trouble I went to to get the sound working in the first place - the lead is (was) the reason I got sound on the TV part! Please don't ask me to take it out!! :-) (As it is now - with the new software I have to choose "line in" [apply] then "CD" [apply] to get sound] But- hey - sound is good on a TV
I know the bracket is moveable - sure - but after all this fuss - I am not at all sure it's worth it - just to get the radio working.
If I launch the radio manually - it's the same " do you want to report to MS" and all that.
Kind regards
Morten

PO created by means of Workflow with out Vendor master updates

Hi Friends,
   I have my scenario like this. I am working with Production server. When ever a request is created, it has to be sent for Vendor master data updates. then only a PO has to be created. The problem is the PO is created and the workflow is completed with out vendor master updates. When i check through SWI6 the step is just skipped. In the graphical view the steps vendor master update i.e tru descion and other wait step types are disappeared. but in the original workflow the steps are present. can any one pls help me in solving this?
Thanks,
Archana.

Hi Arghadip,
Thanks for the reply. The process is like this :
   when once request is created , it will fetch the email id of the approver from LDAP
   Then 2 approval steps are there. first approval is not mandatory. second is mandatory and its having terminatting event.
After this Amendment descion will be there. on rejection of this descion it has to go and update vendor master. Until the amendments the process is going on. after this vendor master update will be there . it includes wait steps to finish the update. then PO has to be created. but from vendor descion to wait event the steps are disappeared when i checked in SWI6 for that user. pls help me.

Would like the currency in the vendor master to always default to USD.

Would like the currency in the vendor master to always default to USD.

Hi,
Currency not available in the vendor master level.
How you want to make default it, if it is not available.
If you want to post particular vendor only with the USD currency, then go for Validation as currency check in header and vendor check in line item and this works only at company code level (that means, only for one company code, if you need it to other then seperate validation you have to write and activate).
VVR

Error ! Unable to continue with N1 SPS Master Server installation.

Product: Sun N1 Service Provisioning System 6.0
I am trying to install sun N1 provsioning Service software. During installation am getting this error.
ERROR! Unable to continue with N1 SPS Master Server installation.
The required OS version is 2.1, and this machine is running .
I am currently using : uname -a
Linux home.org 2.6.9-55.0.12.ELsmp #1 SMP Fri Nov 2 11:19:08 EDT 2007 i686 i686 i386 GNU/Linux
/etc/redhat-release
CentOS release 4.5 (Final)
java-version:java version "1.4.2"
Please any suggestions. Do i have to edit the installation script or install jdk-1.5.

Just change your /etc/redhat-relase to something SPS is aware of...
Something like :
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
or something else (RH4)
This should work, but is NOT supported ;)
Chris

Laptop won't startup. . . chirps like a bird???!

Went away for the weekend. Was watching a DVD on my G4 laptop which hasn't had a problem in 3 years, and it wouldn't eject the DVD.
Went into (option-command-o and f) on startup to do eject cd but sometimes i don't even get to the Apple, or I get the apple and the circular thing and it never ends. Finally did get the dvd out by pressing the eject button repeatedly.
Tried zapping P-RAM and that's when my computer started making this weird chirping noise, like a bird or a fire alarm, very sharp and quick, about every 30 seconds, won't start up.
Anyone heard of this or have any idea? Was it related to the DVD? Where is the sound coming from? I was out of town with no net so I haven't looked into restoring from the System Software CD yet.
Any thoughts or references much appreciated.
enzosf
specs below.

I broke down and took it to Total Mac today, and apparently that is it - drive failure. It worked great for three years - i wonder if the wiring (I was in a cabin for the weekend) and not having a surge is what killed it? It was only plugged in a few hours.
thanks
enzosf

Ipod touch 4 gets hot while using some apps like angry birds?

Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps. I assume that it has something to do with battery drain, should I be concerned?

When the iPod is used heavily like for games it is norma for the iPod to get warm. Unless you hav short battery life I would not be concerned.

TV Anywhere Master Installation instructions combined with WinProducer

Installation of MSI TV Anywhere Master on Windows XP SP1, DX9 (Should work on other installations but tested on this.)
First, before beginning go to http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_ten.php?UID=193 and download the new driver package. You will need to run the executable and extract it to a folder before proceeding.
UN-INSTALLATION
Before proceeding you need to uninstall all of the software that came with the TV Anywhere Master. Below are instructions on how to do this.
WinProducer Un-installation
Now, open Add/Remove Programs. Locate InterVideo WinProducer and remove it, it will request you to reboot, go ahead. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
MSIPVS Un-installation
Reopen Add/Remove Programs and locate MSIPVS and remove. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
MSI Radio Un-installation
Reopen Add/Remove Programs and locate MSI Radio and remove it. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
TV Tuner Driver Un-Installation IMPORTANT!
Reopen Add/Remove Programs and locate and remove TV Tuner Drivers. These are the drivers for your TV Tuner even if they don’t say MSI! REBOOT
Now you are ready to proceed with the installation.
INSTALLATION
Installation of MSI TV Anywhere Master on WinXP
TV Tuner Drivers
Locate the folder you extracted the drivers downloaded from the link above and run “PVSSetup”. Follow all onscreen instructions. REBOOT
WinProducer Installation
WinProducer needs to be installed next because of a file incompatibility with MSIPVS.
Insert the CD InterVideo WinProducer / WinCoder. Follow the onscreen instructions to reinstall. REBOOT
MSIPVS and MSI Radio Installation
Insert the CD Labeled InterVideo MSIPVS.
In the AutoRun make sure you Select MSIPVS, NOT the drivers. If you select the drivers you will have to start over by removing the software again.
Follow the onscreen instructions and during the install when it encounters a locked file select “reboot”. Once completed reboot the system.
You should be all set now! Have fun….. If this doesn’t work on your system please let me know your config and what problems you are still having….
Thanks,
Larry (digitaldreams)

Note: NTSC region, FFDSHOW set to accept raw video, output just about anything, de-interlace set to ffmpeg (seems better than 5-pass or TomsMoComp; any attempt to link in a DScaler .dll crashes the player) resize and sharpen (to your display res, set "No Aspect Ratio Correction), "Experimental" method (much less load than Lanczos, which is slightly better) 1.60 for both luma and chroma.
1. Load MPC, click on File>Open Device>Select "Conexant 2388x Video Capture", click OK. If necessary, View>Capture to get control frame.
2. Play>Filters>Conexant 2388x Video Capture>MSI 8606 Crossbar>drop Output Menu>select Video Decoder Out (this turns on the Apply button)>Tick Link Related Streams>Click Apply Button (and voila, sound)>Click OK to exit.
2a. Play>Filters>MSI TV Audio>Set Channels and Language (seems to be a one-time only requirement).
3. Play>Filters>MSI 8606 Tuner>(set country code, tuning mode, input & video standards if necessary) change channel once via filter keypad or up/down arrows (seems necessary to get pageUp/Down keys to be recognized).
4.Play>Filters>Conexant 2388x Video Capture>Properties (make sure Video Standard under Video Decoder tab is correct)>Video Proc Amp>Set to personal preferences (I like Sharpness at max setting, you may find it 'grainy').
5. Usually, the tuner output reverts to RGB16; FFDSHOW (for me, anyway) seems to need YUY2. Then crank the horizontal & vertical res to max, click on "Set".
6. Close the Capture frame, adjust image window size, position to your liking (alt+enter toggles fullscreen - doubleclicking the image usually locks everything up).
Simple eh? Worth it? Your decision. Not quite DScaler, but close.
Channel selection by keyboard is only next/previous (and opposite that of MSIPVS). Channel jumps can only be done by the filter. (Right click on image if you are in full screen (and if you are simply watching TV, you can drag the filter window down and offscreen).
And there are all sorts of weirdness - you never know what settings will "stick" from one time to the next. Haven't been successful in getting it to record, and after playing around with some other recording programs, I now have this echo (or even echo/echo) sound (I have to TURN OFF the line input to the sound card to get rid of it, yet the line input volume slider still has effect).
It's a great time waster.

Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t fin

Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t find more the desinstaller of old CC version and the 2 versions takes a lopt of space on my disk... is it normal or is there a necessity to stay with the 2 versions... Now I use only the 2014 version but the old version is always there ????

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

How to import or sync Exchange server data like Calendar, Contacts with a web application or web service

How to import or sync Exchange data like Calendar, Contacts with a web application or web service.
1. Is there any API to import contacts and calendar (tasks and events) from exchange server to my calendar in web application using web services or http request. the user would have provided the username and password for his exchange account.
2. Is there any licensing involved to communicate with exchange server for its data.
thanks in advance

I am bit lost here; i have my exchange credentials, how (or) can i use the above mentioned solution for windows application or web services. can you please point in the right direction. my requirement is this: how to sync exchange data with a third party
app or webapp(my development) using EWS. how to start with, starting point and steps to do[just overview ;)].

Hello..i use firefox 4 beta 05..my question is..why when i open let's say 6 tabs..my windows show that i have 6 instancies of firefox instead of one like it does with firefox 3.6? thanks

hello..i use firefox 4 beta 05..my question is..why when i open let's say 6 tabs..my windows show that i have 6 instancies of firefox instead of one like it does with firefox 3.6? thanks
maybe i am saying it wrong..when i press alt+tab there is only one firefox open..but in windows 7 in the taskbar..every tab open..appears as another window open

If you are referring to taskbar previews, you can turn them off by modifying a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''previews'''
# Double-click on the preference browser.taskbar.previews.enable to change its value to '''false'''

I have a EOS T1i and would like to experiment with time lapse photography. Any help?

I have an EOS T1i and would like to experiment with time lapse photography. I just read an Apple tip for the iPad and it is easy to do with the iPad but timing is something else. I would like to do it with my Canon and be able to change the timing between shots. Can you provide advice? I put time lapse into Google and it had an attachment for the T3i that I could get from Amazon. I don't know if it fit my T1i and don't know where to put it. Any advice would be helpful. I tried to do a search on this forum but could not find the answer.
Bob
Solved!
Go to Solution.

The Google search: https://www.google.com/search?q=EOS+T1i&oq=EOS+T1i&aqs=chrome..69i57j69i60l2&sourceid=chrome&es_sm=1...
The first hit: http://www.superstokedmagazine.com/article/2013/09/how-to-do-a-time-lapse-with-a-canon-eos-rebel-t1i...

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

[TV@Master] Fly like a bird with tv@anywhere Master (finally a great sofware!!!)

Similar Messages

Maybe you are looking for