[TV@Master] Not all availabe channels are detected

A few weeks ago I bought the TV@nywhere master card. I downloaded the driver from this forum and MSIVPS.
I already recorded some programs and movies and burned to DVD. In my experience this works best using WinAvi. When I use WinDVDvreator, sometimes the sound gets behind after burning to DVD, although the original file playes ok on the PC.
The remote control works fine when you install MSIPVS after installing WinDVDcreator. The other way round it does not work. Then the Wincinema manager is set incorrectly (I suppose).
Altough the card is working I still have some problems:
- I attached the Cable, but channels are only found setting the software to Antenna,
- Not all channels are found. I live in the Netherlands. The 2 main Dutch channels are not detected, many other channels are. When trying Christv it found these channels, so I suppose it is a software problem. Maybe something to do with the frequency range, but this cannot be adjeusted in MSIVPS? Does anyone have a solution? I is very annoing not being able to receive all channels.
After installing the beta versions of the driver and MSIPVS3, it appeared that some channels are detected in antenna mode and some channels are detected in cable mode. Why not all channels in cable mode?
Is there something to adjust in order to fix this?
Ruud

jaksun5,
have you searched or browsed through this forum to see if your problem has been solved?
if you cannot find an answer you should have started your own thread, giving as much information about your system (including your location, local TV standard and connection) and your problem, and what steps you have already taken to remedy this. at the moment your post makes you sound lazy (which i'm sure you may not be) by expecting others to find solution for you. by demonstrating what you have already attempted in order to solve problem, other users will be more willing to help you
if no answer then becomes apparent, you should contact your local MSI support office, to see if they can assist you. who knows, you might get a solution off them, if so, then post back here. in future, someone may have your same problem. by doing all the above steps, they will come to your thread, with your solution, and you will have helped someone down the line
How to contact MSI.
good luck!

Similar Messages

I have three "pages" of apps, not all of which are full. How do I move an app from one page to another to consolidate?

I have three pages of apps, not all of which are full. How do I move apps from one page to another to have full pages?

Hook your iPad up to your computer and iTunes and move them from within iTunes.
Or
Hold down on one of your apps until they all start to wiggle. Then hold down on the ones you want to move and drag them on the screen. Drag them to the middle left to move them left,(such as from page 2 to page one) middle right ot move them right,(from page 2 to page 3) rearrange as you want.
When you're done, tap the home key and everything should stop wiggling.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

If on a computer browser you go to icloud.com and sing in are you notes there? If so get them off.
Next,
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iCloud and delete the iCloud account from the iPod,. Note this does not delete the account, only deletes it from the iPod. Then sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Backup and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

Not all selected pictures are shared in album sharing in Photostream

I am trying to share an album with my friends on photostream. After i selected the album, added the friends, and waited for ever to upload the pictures, I realized that not all the pictures are available on the shared album. So i had to go back again and check the photos one by one to see what has been uploaded and what is missing to reupload them manually. This can get very tiring in large albums.
I guess mmy question is this:
Why is it doing that ? and how can i avoid such behaviour?
Is there a way that i can monitor / check the photos uploaded to make sure that the full album is there online ?

Hello Karim Zaafan,
Thank you for using Apple Support Communities!
I was thinking that it might be a good idea to see if perhaps you are bumping up to the limits of Shared Photo Streams.
iCloud: Photo Stream limits
http://support.apple.com/kb/HT4858
Shared Photo Stream limits
The current Shared Photo Stream hourly and daily limits are as follows:
Maximum number of photos to share per hour: 1,000
Maximum number of photos to share per day: 10,000
These sharing limits are separate from the upload limits above. For example, in the same day you could upload 10,000 photos to My Photo Stream and then share those 10,000 photos, or 10,000 other photos.Some additional limits for Shared Photo Stream usage:
Maximum shared streams an owner can share: 100
Maximum shared streams a user can subscribe to: 100
Maximum subscribers per shared stream: 100 (the number of subscribers on each shared stream)
Maximum number of photos per shared stream: 1,000
Maximum number of comments per shared stream photo: 200 (a comment can be either a like or a text entry)
Maximum characters per comment: 200
Maximum number of invites a shared stream owner may send per day: 200
Also I would recommend this precautionary step from iCloud: Photo Stream troubleshooting found http://support.apple.com/kb/TS3989
Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
Cheers,
Sterling

Error during Usage Decision - Not All Physical Samples are valuated

Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.Devaraj

Hi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin

I preordered an album but not all the songs are showing up. They say purchased but wont go into my itunes library or onto my iphone. Please help.

They say purchased but wont go into my itunes library or onto my iphone. Please help.

Hey there aussieboss123,
It sounds like you are wanting to download an album that you pre ordered, not all the songs are downloading. First, use this section of the following article to see if the tracks download:
Download a pre-ordered item
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
If you enabled the option to automatically download prepurchased content in iTunes, then your pre-ordered content may already be in your library. If not, click the download link provided in your email notification, and your pre-ordered content will begin to download. You can also use the Check for Available Downloads feature in iTunes on your computer (choose Store > Check for Available Downloads) to begin downloading your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
If it does not, I would use the following article to report a problem with the purchase to the iTunes Store support directly:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Cheers,
Sterling

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.muli

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files. Can anyone help?

found it in another area
Where do I find the cc getting started Katies.mulib File ?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know

Not all physical samples are valuated, force inspection completion?

Hi
I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
What is missing or how can I avoid this message?

In QE23, Select the inspection lot and check for the physical sample,
Once you enter both, you will get the screen similiar to QE51 to record result,
You will see a button for physical sample which u need to select and do the valuation.
hope this helps

HT4759 not all my contacts are being sync from my IPad or IPhone to ICloud?

When backing up IPhone 5s or Mini IPad retina, not all my contacts are backing up or showing in ICloud?

I assume that you have enabled contacts syncing with iCloud in Settings>iCloud on your devices. If so, and some of your contacts don't appear on icloud.com, open the contacts app and tap Groups. Do you have any non-iCloud accounts listed such as On My iPhone (iPad), Gmail, Yahoo or an exchange account?
Also, go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account?

In material master not all fields show the description of their value

Gurus -
Certain fields in the material master show their description text along.
Example -
Base Unit of Measure - EA      each
The description Text 'Each' which represent 'EA' comes from text Table T006A-MSEHT
Not all fields in material master show the description of what they represent. (only appear on F4 popup)
I want this description to come up for MARA-MAGRV field.
I want the configured value description for this field to appear on the screen.
I have 3 values put in this MARA-MAGRV
Z001 - description text 1
Z002 - description text 2
Z003 - description text 3
in MM01/MM02/MM03 only Z001 is see, not it description.
Here is what i tried
Added TVEGRT-BEZEI (desc field) in Transaction OMSR and assigned selection group 103 which holds MARA-MAGRV field too
any config missing?? what say?
Advises appreciated!
Thanks

You have to find out the conversion routine for domain MAGRV and enter in the convers. routine field.
if did not find one than you have create custom (take ABAPer help)
go to SE11 adn enter the domain MAGRV and hit display
on the definition tab you will see the conversion routine
here you need to populate the appo. conversion routine to see the text on the materia screen.
Conversion takes place when converting the contents of a screen field
from display format to SAP-internal format and vice versa and when
outputting with the ABAP statement WRITE, depending on the data type of
the field.
If standard conversion is not suitable, it can be overridden by
specifying a conversion routine in the underlying domain.
A conversion routine is identified by its five-place name and is stored
as a group of two function modules. The function modules have a fixed
naming convention. The following function modules are assigned to
conversion routine xxxxx:
o CONVERSION_EXIT_xxxxx_INPUT
o CONVERSION_EXIT_xxxxx_OUTPUT
The INPUT module performs the conversion from display format to internal
format. The OUTPUT module performs the conversion from internal format to
display format.
If a screen field refers to a domain with a conversion routine, this
conversion routine is executed automatically each time an entry is made
in this screen field or when values are displayed with this screen field.

When I export a playlist and then open in excel, do whatever sorting I want, I then save the file and reimport into itunes but not all the songs are there. It appears to be from "comma's" in the song name. Any solutions?

I see songs such as "Monday, Monday" or "Paint It, Black" or even the artist name such as "Fireballs, with Jimmy Gilmer" which have comma's in them, being a problem when I try to do the following:
1. Export a playlist which contains songs which are all there and play fine, but some have comma's in the title such as listed above.
2. I then open that file in Excel and bring it in as a Tab-delimited file. Everything lays out fine, and all the songs are thing (including those with comma's).
3. I then sort the varoius fields I want (which I can't do in i-tunes because i-tunes won't sort it properly), and resave the file as a newly named file, which is also a .txt file.
4. I then import that playlist into my itunes. It is exactly the same songs that I just had exported but i-tunes says some of the songs can't be found.
I have traced this problem to comma's in the file name of the song such as listed above. There must be a solution to this either as the file is opened in excel or in how it's saved or some other solution short of having to rename song/artists without using comma's.
Thanks.

The additional problem is the file name of the song itself. Even if I were able to delete the commas or replace with a space for example, changing the file name would result in itunes not being able to find the file. I would have to go through each file (out of about 15,000+ songs) to find any that have titles such as described in this thread and change not only the song and artist in the fields, but changing the mp3 file itself.
I fear that I am really pretty much going to have to start with a list of songs that have no comma and then do a file compare to find those songs with commas and then just physically moving them into a new playlist I'm trying to create, but this is a royal pain as I want to be able to create a variety of playlists based on these chart dates/peak positions.
I'm trying to sort the songs in this manner: I use different fields in itunes so that I can put the "peak position" of each song based on Billboard charts, as well as the date the peak position was acheived. I use the "comment box" for that. I use the "grouping" field for my peak position.
So I end up with something like "10/14/1980" in the comment box as the peak position for a song which is in the grouping field, and so forth. If I try to sort the comments column in itunes for example, it won't sort properly. If I sort the Grouping field, it will bring up all the "1's", but that's followed by "10", 11, ...19, then "2", etc. This is why I want to export the playlist and sort it as I want, and then reimport the playlist into itunes.
What I'm ultimately trying to achieve is a year-by-year peak position playlist so that I end up with every #1 song (in this case) from, say, January 1st 1980 and then every #1 song in sequential order for the rest of the year falls in line. I have chart position dates from 1955 through 1999. I have entered in all the data from Billboard books I own so I can really create some amazing playlists, but these commas are problematic. Had I known this ahead of time I would have made "Monday, Monday" as "Monday Monday" and not included commas, but it's too late for that.
Any suggestions?

Not all lexical parameters are being bound

Reports SQL parser is binding to only 2 of 4 variables. SQL TRACE option confirms this:
AND CABCHCK_CORT_CODE = :P_COURT_CODE
AND CABCHCK_LOCN_CODE = :P_COURT_LOCATION_CODE
AND CABCHCK.CABCHCK_DATE >= TO_DATE(:P_DATE_FROM)
AND CABCHCK.CABCHCK_DATE <= TO_DATE(:P_DATE_TO)
Bind Variable Value
P_COURT_CODE 23
P_COURT_LOCATION_CODE TC
Note that :P_DATE_FROM and :P_DATE_TO are not shown in the trace as a 'Bind Variable'. The error message when running the report is:
ORA-01008: not all variables bound
This is a report which has previously worked and where the SQL code and the lexical parameters have not changed (but the layout changed slightly). Could this be yet another corrupted .rdf file? If so, how is this circumvented?
Regards,
Steve

The issue has been found and solved.
The SQL code is loaded into a lexiconal variable and run from the query. For example,
:P_WHERE_COURT = 'and cabchck_cort_code = :p_court_code';
This was in the BEFORE_REPORT trigger. It worked.
However, the third and forth lines (with the TO_DATE function call) were not working. In the SQL statement, the functions referenced the :P_DATE fields but they weren't bound.
The date statements were loaded in the same BEFORE_REPORT trigger as the court and location lines. By moving all of the code into the AFTER_PARAMETER trigger, the errors went away and the SQL processed normally.
Why would this move from BEFORE_REPORT to AFTER_PARAMETER have done this?

New version of ITunes installed - Not all music files are being recognized

My system crashed and Itunes was automatically 're-installed.' My music is located on my external hard drive. When I reconnected my music to ITunes about 3000 music files did not appear in my library. Before the re-install all music files were available in the library.
The music files are all still located on my external hard drive. Strangely, when I copied my music on my external hard drive to create yet another back up of my music many music files were missing on the copy. The missing files were a combination of downloaded music from a cd and purchased, no trend.
I welcome any advice on how I can get 1. my ITunes library to read all of my music files (which are in ITunes format) and 2. how do I copy all of my music on my external hard drive to make a safe back up (I-tunes back up is not an option because not all of the music appears in my library)
Thanks for your help

See Recover your iTunes library from your iPod or iOS device.
tt2

[TV@Master] Not all availabe channels are detected

Similar Messages

Maybe you are looking for