[TV@Master] Possible IRQ conflict?

I recently purchased and installed MSI TV@nywhere Master and encountered nothing but problems since.
I had a hell of a time convincing MSI that I was in Canada and not in Afghanistan. It would also not believe I had a cable hooked up to it. I finally got that fixed then I tried setting up the channels using Autoscan ... WOW what an experience that was. For a few minutes I could actually see TV channels whipping by. Then nothing but a black screen.
I tried a reboot and got a hissing noise before XP even started. I was not sure if it was the TV tuner or the radio, so I opened MSI radio and then shut it down. The hiss disappeared but so did my internet connection. Actually the router shut down one port. I run a Blitzz Wireless G router with 2 computers hooked up by LAN cable and one using the wireless. Both the other computer on LAN and the one on wireless stayed connected.
I uninstalled both the MSI PVS and radio and did a reboot. Nothing! I had to repair XP from the CD to get back to where I was before the fiasco started.
I am convinced there is a conflict somewhere and am looking for solutions before returning the product and buying a different brand.
Would the drivers mentioned in another thread be the solution or using a different PCI slot?
Any input would be greatly appreciated. I hate downtime.

added [TV@Master] subject tag
download the beta drivers from the sticky, uninstall the TV tuner drivers and MSIPVS application, then follow the installation instructions in the TV@nywhere Master sticky, and the beta drivers sticky

Similar Messages

What's all this "possible midi conflict", "missing extensions" jazz?

Recently I installed Leopard, 2gb of Ram, and Pro 8 in my Powermac. I have an emagic amt8 and a motu 828mkII connected. I installed the latest motu drivers. No problem.
A little later I installed the exact same thing on my friend's powermac, which is the same generation as mine. He has a motu 828mkII and an 8pre daisy chained to the mac. Every time we launch logic we get "possible midi conflict...old drivers..blah blah", and the "missing extensions...go to Pace website...blah blah..." After closing those boxes (often several times for the "possible midi conflict") logic launches and says "core midi not available", or some such.
We've learned that we simply need to quit logic and relaunch and the problem usually goes away and everything works as it should. Sometimes I have to do the routine twice. This happens even if I quit logic and launch it the same day.
Going to the Pace website didn't help. I could find no old drivers to remove. My friend's system used to have Pro Tools on it, but I think those drivers are gone. I've messed with audio/midi setup in utilities. I've gone to the library to try to find old drivers.
I know other people have complained of similar problems. Can anyone shed any new light on this?

Open Hard Drive go to library-> Audio-> Midi Drivers. Move drivers to Trash but don't trash.
Now go to library->Audio->Plug-Ins->Components. Drag this folder to desktop & move contents of this folder to trash but again don't trash anything yet. Now still in the hard drive section go to your user file i.e the house logo with your name next to it. Go Library->Audio->Plug-Ins->Components & check this file is empty. It should be but if not do the same as with the previous component file. Restart the computer & try opening Logic. Hopefully it should work now. You'll have to decide whether you want to trash the drivers if you don't use them or if you want to get in touch with the third party company to open the iLock but for the time being Logic should work

Brand New mobo (P6NGM) with IRQ Conflicts, PLEASE help

I've posted multiple times in another well respected PC forum and have not resolved my issue yet. Would GREATLY appreciate assistance.
Here's my story and attempts:
I'm building a new PC for my parents:
mobo: MSI P6NGM
cpu: Pentium dual core e2200 (800fsb)
memory: 2g DDR2
video: Radeon 9600PRO 256MB PCI-E
I'm having problems in Device Manager.
the modem (Smart Link 5k Voice Modem) and something called the NVIDIA nForce System Management Controller both have a yellow-exclamation point on them and when I looked at their properties\device status says:
Quote
This device cannot find enough free resources that it can use (code 12).
If you want to use this device, you will need to disable one of the other devices on this system.
I have all of the current drivers and latest BIOS installed (and confirmed).
I believe it's telling me I have an IRQ conflict and when I looked at the Device Manager \ Resources by Type, it tells me that there are 3 devices on IRQ 7, 2 devices on IRQ10 (my PCI-E video card and the 56k modem), and 2 devices on IRQ11 (the NVIDIA nForce PCI System Management).
I did a google search and tried disabling the com ports 1 & 2 (but could only find & disable com port 1)
but this didn't improve the problem.
I also tried un-plugging 2 front USB-2 ports from the mobo.
no improvement there either.
meanwhile, IRQs 2, 3, 4, 9, 14, and 15 are empty. Is there any way to assign to these?
Please help. I just built a dual core AMD with another MSI mobo for my daughter last month and didn't have any issues with it.

yes, i tried switching to the other PCI slot (this mobo only has 2). no improvement
Last night, I also tried disconnecting everything (3 USB ports connected to the mobo) and performing a fresh install of XP. I was extremely disappointed that this didn't work either.
I also tried unistalling all of the devices on IRQ10 and rebooting with IRQ10 Reserved (so all of the devices would be assigned to something else). Then I uninstalled the modem again and enabled IRQ10, hoping that everything would have been assigned elsewhere and only the modem would be assigned to IRQ10 this time.
NO LUCK!
I've NEVER had so much difficulty with IRQs, and only installed 2 devices: the PCI-E video and a PCI modem.

IRQ conflict

My DAQ PCI-MIO doesn't pass the configuration test and looking in the device
manager of Windows 95
I see a memory conflict which can be solved easily by assigning a new range,
but also a IRQ conflict with
my IDE controller. I dont't manage to solve that last one. I know for sure
that there are IRQ adresses available,
I can't change anything in the device manager and the boot manager also doesn't
give me possibilities to
change anything. Dell says that I should contact NI, but here I also don't
find a solution. Can somebody
help me??

You can only change the IRQs using the NIDAQ Configuration Utility or
Measurement & Automation Explorer if you are using Windows NT and an AT board.
If you are using a PCI board, the board's resources are assigned by the BIOS at
boot-up, and they can only be changed from the BIOS. If you're experiencing
resource conflicts with a PCI-board, I would suggest switching PCI slots,
preferably to one closer to the motherboard. Some BIOSes will let you reserve
resources. Try reserving an IRQ for your board. You can also try upgrading
your BIOS. If you're using a DELL computer, I would recommend trying all
revisions of their BIOS to see if that resolves the problem.
Regards,
Erin Bray
"Liberman, Sergey" wrote:
> You can usually change IRQs for NI hardw
are in NIDAQ Configuration Utility
> (for older versions of NIDAQ) or in Measurement and Automation Explorer (for
> NIDAQ versions 6.5 and later).
>
> --
> -- Sergey Liberman
> -- Don't use Reply button! Thank you.

PCI-1428 BIOS IRQ conflict on boot

My PCI-1428 board works fine in a Dell Diminsion 8600. Moved it to a new Dell Optiplex 780 and I get a bios error when I first turn on the computer saying there is an IRQ conflict. Is there any what to get this card to work in the Optiplex 780?

Hi JoePar,
I found a good KnowledgeBase that explains
this issue. I think it might be helpful to look at it, and try what's suggested.
You also might want to contact your PC manufacturer to see if they have any
Bios updates or so for your PC.
Esmail Hamdan | Applications Engineering | National Instruments

X-fi Titanium, possible USB conflict in IRQ

I installed the Titanium two weeks ago. Initially, no problems, but the last few days, there's been significant USB mouse stuttering and occasional freezing. Every occurrence signaled by the Device Disconnect sound in Windows. Unplugging the mouse and replugging gets me past the freezes but it returns very quickly. Sound is fine, no issues there.
This is a Windows 7 64 bit. I removed the card a few hours ago and the stuttering is gone-mouse is working fine with no issues, so the only conclusion can be some conflict between the card and the USB. My guess is an IRQ issue-
Any suggestions on how to deal with this? Windows and Titanium are fully updated.
Thanks.

/Thanks for the suggestions. Two days ago, I uninstalled the mouse and then plugged in the mouse that came with this computer, which reinstalled the mouse drivers. It also seems to have assigned a different IRQ to the mouse. So far, no stuttering. I want to wait a couple more days to declare victory but this would be better than opening up the BIOS and messing with that.

KT4 MS6590 IRQ conflicts

Is there any way I can change the on-board sound IRQ from 11 to 5(e.g)?? ?(
I need to do this to avoid conflicts as my Video card and usb controller. ;(
this conflict is causing 3D mark not to run and other system probs such as BSD's X(
Here is a listing of my IRQ table.
IRQ 0   System timer   OK
IRQ 1   PC/AT Enhanced PS/2 Keyboard (101/102-Key)   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   VIA Rev 5 or later USB Universal Host Controller   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 10   Realtek RTL8139 Family PCI Fast Ethernet NIC #2   OK
IRQ 10   Win XP Promise FastTrak 376 (tm) Controller   OK
IRQ 11   NVIDIA GeForce4 MX 440SE with AGP8X     OK
IRQ 11   CMI8738/C3DX PCI Audio Device   OK
IRQ 11   VIA Rev 5 or later USB Universal Host Controller   OK
IRQ 12   VIA Rev 5 or later USB Universal Host Controller   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
MY system MSI KT4, 512mb PC3200 400mhz, MSi MX 440SE 8X AGP, ATHLON XP220+, 450Watt PSU Q-Tech Gold, Win XP Pro SP1, 120GB Maxtor, 100GB IBM, 80 GB Maxtor, Lite-on CDRW, Pioneer DVD rom.
Have tried to manually configure IRQ's to no avail using bios setup.
I have disabled ACPI function in bios and removed ACPI computer in win XP so reverting to standard PC setup.
this removed a problem of the Video card having an IRQ of 123!!!
any help would be appreciated thanx in advance

0   System timer
1   Standard 101/102-Key or Microsoft Natural Keyboard
2   Programmable interrupt controller
3   Communications Port (COM2)
4   Communications Port (COM1)
5   VIA PCI to USB Enhanced Host Controller
5   ACPI IRQ Holder for PCI IRQ Steering
6   Standard Floppy Disk Controller
7   ECP Printer Port (LPT1)
8   System CMOS/real time clock
9   SCI IRQ used by ACPI bus
10   VIA Tech 3038 PCI to USB Universal Host Controller
10   Creative SB Live! series
10   ACPI IRQ Holder for PCI IRQ Steering
11   VIA Tech 3038 PCI to USB Universal Host Controller
11   NVIDIA GeForce4 MX 460
11   ACPI IRQ Holder for PCI IRQ Steering
12   VIA Tech 3038 PCI to USB Universal Host
Controller
12   NEXT 56K PCI V.90 Fax Modem
12   ACPI IRQ Holder for PCI IRQ Steering
13   Numeric data processor
14   Primary IDE controller (dual fifo)
14   VIA Bus Master PCI IDE Controller
15   Secondary IDE controller (dual fifo)
15   VIA Bus Master PCI IDE Controller
Hi
Help!!!!
How to move that usb controler?

PCI/AGP IRQ conflict in Win2000

[size=11]Frenchy writing from France[/SIZE]
Angry & impatient I am, but first things first, my specs:
PSU: Antec Trueblue 480W
Mboard: K7N2 Delta-L, BIOS 5.2
RAM: 2*512 Mb PC3200 Samsung, set at 400Mhz
CPU: Athlon XP 2400+, set(o/c) at 11*200 (thus 1:1 with RAM)
Winfast Geforce 4Ti 4200 AGP 4X
Creative SBlive 1024 now in PCI slot 3
HSF: Taisol CGK760172, fan in extraction mode (to reduce chipset temp by 5°C!!!)
Enermax 80mm case fan
Two recent HDDs (Maxtor) & optical drives (Liteon)
USB ADSL modem
APIC disabled
OS: Microsh*t Windows 2000, SP4
System status: CPU 49°C, chipset 47°C (weather temp: 41°C!)
Here goes:
My system sometimes crashes when I simultaneously play a movie, and an mp3 (I get a "sound loop", system freezes, no blue screen but I need to reboot) or on even rarer occasions (only once, actually) when I send an email (this time I got the dreaded blue screen.
I have pinpointed a possible and highly probable cause for this: my Vcard and soundcard share the same IRQ (IRQ11 to be precise). My SBlive used to be on PCI slot 2. This was (and still is!) my IRQ share/conflicts table:
[size=11]
IRQ 11   OpenHCD standard USB Host Controller
IRQ 11   OpenHCD standard USB Host Controller
IRQ 11   Standard Enhanced PCI to USB Host Controller
IRQ 11   Creative SB Live! Value
IRQ 11   NVIDIA GeForce4 Ti 4200
[/SIZE]
IRQ11 is thus not shared only by the Vcard & sound card, but something told me that the first 3 lines of the table did not matter, however I've often heard (and read, even in this forum) that having a graphics card & sound card share the same IRQ is definitely not a good idea and should be avoided by all means.
Forgive my lack of knowledge, for I'm but a mere newbie in this matter. This I tried:
- Enabling APIC (whatever it is ?( I just know that it sort of "creates" more IRQs), to no avail: the number of IRQs, their layout and conflicts table remained unchanged.
- Moving SBlive from slot 2 to slot 3 and reinstalling its drivers: NOTHING changed either, soundcard IRQ remained at 11 !!! ?( ?( ?(
Upon entering 'system properties' and 'devices', when selecting the SBlive card, in the 'resource' thumbnail, everything is greyed out, no parameters can be changed! Same thing applies to other devices such as Vcard, too...
A most desperate situation this is, for it would seem that changing a PCI card's IRQ in Windows 2000 is simply IMPOSSIBLE, sacrebleu!
Needless to say, this makes me mad X( , I mean really, really MAD
[ALIGN=center][/ALIGN]
If anyone could help...

[size=11]Quote
Originally posted by wonkanoby
just changing it makes no difference it must be enabled when the os is loaded
[/SIZE]
Changing WHAT??? If you mean the IRQ, as I said that seems impossible in Win2000 (if somehow could tell me how I'd be most grateful). If you meant changing APIC setting to 'enabled', how do I enable it in windows?
But the question remains: how is it that when changing soundcard's PCI slot its IRQ remains unchanged?? ?(

IRQ Conflicts and some other issues

I have a K7N2 Delta-L mobo with an XP2400+ and an MSI FX5600-VTDR128, the reason for this question is that I have some problems, the first of them is at the system information page of XP:
=================================================
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF   NVIDIA GeForce FX 5600
IRQ 20   Standard OpenHCD USB Host Controller
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 22   Standard OpenHCD USB Host Controller
IRQ 22   NVIDIA nForce MCP Networking Controller
Memory Address 0xD0000000-0xDFFFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD0000000-0xDFFFFFFF   NVIDIA GeForce FX 5600
Memory Address 0xE4000000-0xE5FFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xE4000000-0xE5FFFFFF   NVIDIA GeForce FX 5600
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF   NVIDIA GeForce FX 5600
I/O Port 0x000003B0-0x000003BB   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB   NVIDIA GeForce FX 5600
I/O Port 0x0000C000-0x0000CFFF   PCI standard PCI-to-PCI bridge
I/O Port 0x0000C000-0x0000CFFF   Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3
=================================================
Looking at this it looks pretty bad if you ask me :(
But when I look at device manager I see no conflicts and every device that's listed here does not have any conflicts reported, anyway here are my IRQ (according to System Information)
===========================================
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   NVIDIA nForce PCI System Management   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 17   Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3   OK
IRQ 19   NVIDIA GeForce FX 5600   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 21   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 22   NVIDIA nForce MCP Networking Controller   OK
===========================================
So, my first question is obvious, what's wrong with my system?, am I missing some BIOS setting?, I believe APIC may have something to do, but this isn't the case because it is enabled (at least it says so in BIOS). I have the latest BIOS for this mobo (5.40)
The second issue is something strange that Sisoft Sandra keep telling me: "SMBIOS/DMI information may be inaccurate", an here's what the help says:
=================================
Notice N224 - SMBIOS/DMI information may be inaccurate. This information is reported verbatim and cannot be checked by Sandra. While brand-name companies set this information most generic manufacturers use generic data that is meaningless. This issue generates more technical support queries than all other issues combined.
Fix: If the information is not correct, check for a BIOS update (clear DMI pool) or fix any errors using the DMICFG tool provided with the board. Alternatively, disable Sandra’s DMI/SMBIOS reporting from module Options.
=================================
Is this "normal"???
Anyway, I hope any of you to be able to help me.
Thanks in advice,
Fernando

Although I am unsure as to what is exactly your problem, but from what I see everything seems ok
Regarding the Sisoft Sandra remarks, don't worry about it.
Regarding the Computer in Device Manager
Try changing it to
Advanced Configuration and Power Interface (ACPI) PC
This has not given me any problems at all.
Here is my system example
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   Standard OpenHCD USB Host Controller   OK
IRQ 5   NVIDIA NForce MCP2 IDE Controller   OK
IRQ 5   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 5   NVIDIA GeForce FX 5900 Ultra   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   Standard OpenHCD USB Host Controller   OK
IRQ 10   NVIDIA nForce MCP Networking Controller   OK
IRQ 10   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 11   Standard Enhanced PCI to USB Host Controller   OK
IRQ 11   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 11   WinXP Promise FastTrak 376 (tm) Controller   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK

Extra customer group 6 in customer master possible or not

hi sd experts,
my client asking for additional wants additional field in customers master >extras>additional data > one extra additional customer data (S&D) - existing 5 groups already using.
img>sd>master data>business partners>customers>sales>maintain reserver fields in customer master - customer group 1 to customer group 5
pl let us know in standard sap ecc 5, the getting additional customer group 6 is possible or not.
pl help
thanx in advance
regards
srihari

Not possible in standard way as cust grp 1 to 5, but check below
Go to SPRO> SD > System modification > Create New Fields (Without Condition Technique) > Reserve Fields In The Customer Master Record
Sit with your abaper and do it.

Master page size conflict? Can't figure out what's wrong...

Hi community,
I posted this ticket earlier, but I think I should post it in English, for a larger audience...
So here's the story :
I got a really odd issue while moving (or adding) pages...
Here's a very basic layout :
Now, lets place page 2 after page 3. Here's the result :
As you can see, pages don't seem to relate properly to master pages.
I can't figure out why...
If I apply masters onto my pages, InDesign says there's a size conflict.
Assuming I would apply again my master, ID will replace elements at the right place for now, but doesn't solve the problem at all.
Any idea ??
Here's a download link for this document :
http://dl.free.fr/lPfXwwajm
Please note, I'm working with InDesign CS6 (8.0.2 version)
Thanks a lot for your help!
Vincent

Hi Willy.
I didn't use the page tool (I never do), but it's a collaborative project, so I can't be sure nobody did.
As you might have guessed, the attached Indd file is not the real file: I did remove all styles, variants, blocks,... everything from the original project to reduce it to a very basic template...
If I create a document from scratch, obviously there is no problem. If I don't find the solution, I will recreate the document from scratch, but you'll understand I'd like to avoid spending my time that way...
So...
I tried changing the orientation from document setup and crtl-z... didn't do the trick!
Now, here are more information for a better understanding:
The original project was landscape orientated (A4).
I had to adapt it to a portrait orientation version (still A4). Please note I didn't use the page tool. Obviously, something got wrong there and did create the problem...
Now, if I right-click my page panel and set its view "by variant", the name of the (unique) variant is the same than the original project, even though it has a different orientation.
The strange thing is that the name is a personalized one (it should have been "A4 H"). Why is that? I dunno... Why (anf who did?) change the name of the "variant" is a mystery... But I guess this could be a clue...
Well... still stuck on this puzzler...
Thanks all for your help anyway...

CMEDIA / AGP IRQ Conflict

I have a KT4 Ultra (MSI-6590) with BIOS v1.4. Am using the onboard CMEDIA audio with a GeForce4 Ti4800SE AGP video card (8x). The devices seem to be sharing IRQ 16 and it is causing my audio to stutter during certain graphically intense applications (games). I need to know how to resolve this conflict BESIDES using an add-on audio card. Thanks.

Quote
Originally posted by BOGEYMAN1 CGA
Oh and chnage your agp speed to 4x ..KT 400s are known to have issues with 8x agp speed settings on their moboards.............If you really want to take advantage of 8x agp then get an nforce2 board
From what I understand, the only way to disable 8x is with a piece of scotch tape. That's just not something I'm willing to do - stick a foreign substance in my AGP slot.

Possible Hardware Conflict - HD & iPod

Hi
We recently upgraded my Mom's iMac with an 80GB Western Digital hardrive and 1GB of memory because of it was running too slow. But now when it boots, it will flash the folder with blinking question mark and then boot. It also has flashed that icon and not boot. A couple reboots got it working again. Is there a hardware conflict between Western Digtal harddrives and Macs?
In addition to that problem, it crashes every time I plug in my iPod anymore. I plug in iPod and iTunes is the first to crash and Finder crashes and the only way to get it back is to shut down the mac and unplug iPod when it's off. I tried just restarting the Mac and that usually will fix the problem but today a restart didn't work. iTunes and Finder crashed again. My iPod is a 3rd Gen 10GB with OS version 2.3 and my mom's Mac is a 2nd Gen iMac I think. It's running OSX 10.3.9 and iTunes 7.0.2 What doesn't make sense to me is that I'm running the same version of X and iTunes and I have no trouble with iPod on my eMac. Is it possible that there is a hardware conflict between my iPod and mom's iMac? I'm asking because my iPod has never worked well with mom's Mac. Sometimes it will mount fine but most of the time it takes forever to mount and in most cases, esp since iTunes 7, it crashes the whole system.
Could a bad motherboard/logicboard cause all this fuss? We're planning on taking it to the local Mac store this Friday, but I thought I'd ask if anyone had any ideas.
thanks
Music Luver
"I hear her playing music..." ~ Barry Manilow

Sorry friend, but we are not technical support.... Others are having problems with thier older iPod classics when using iTunes 9 as there is a seperate thread out there regarding this problem. However I don't know if they have come to a resolution.
The only suggestion that I have is to read through that thread and see if any of thier suggestions work. However there is alot to sift through.
Best Regards!

Onboard IRQ Conflicts

I'm about to get an AMD 64 system and I had my eyes set on the MSI K8T Neo 2 until I read the review on http://www.hardocp.com .
The review states that when using the onboard gigabit lan there is a considerable performance lag. I was wondering if any of you have noticed this and is it a real problem?
Also, are there any conflicts with any of the onboard features and the pci/agp slots?
Thanks

I did look at the review. Here is what it said about the lan lag:
Network Utilization Tests
Hagel Technologies’ DU Meter software was used in conjunction with Windows Task Manager to measure the performance of the onboard Realtek Gigabit NIC. DU meter was used to measure bandwidth, with Windows TaskMan to monitor the CPU utilization on the test system. For the test itself, a 750MB archive file containing various sized .WMA audio files for the large file transfer test and 750MB worth of various sized .WMA audio files for the small files transfer test were used in conjunction with an Intel Gigabit NIC on the host system, and a crossover cable to connect the host system to the test system. A crossover cable was used to rule out any possible bandwidth losses due to hub or switch passage.
The Realtek NIC performed well as far as average transfer rate for a Gigabit based Ethernet solution. The average upload was much faster, beating the download speed by 10 MB/s. However, this increased speed comes at an unacceptable cost of an almost 50% CPU utilization, with spikes as high as 60%. The CPU utilization during download was not much better, averaging between 30-40%.
The large file transfer test results identically mimicked those of the small file transfer tests. We again see the unacceptably high CPU utilization for both download and upload as well. MSI’s choice of the Realtek chip seems to be less than optimal due to the high system performance cost incurred while transferring files.

Possible version conflict, sending purchase order to SUS in MM-SUS scenario

We are currently trying to get the MM-SUS scenario working. In this
scenario, we create a purchase order in the ERP/MM system. The
purchase order is then transferred into SUS via XI/PI.
After creating a purchase order in the MM system, the purchase order
reaches the SUS system, but then errors-out in the SUS system upon
posting. The specific error is paraphrased as follows:
No interface action for sender or receiver found (from Trace)
PARSE_APPLICATION_DATA
CX_ST_MATCH_ELEMENT
System expected the element http://sap.com/xi/SAPGlobal20/Global;
PurchaseOrderRequest
We suspect a version conflict. The SUS version is 7.01. The XI/PI
system is version 7.11.
Can you confirm or rule-out a version conflict?
The Integration Builder scenario we are using is Plan
Driven Procurement with Supplier Enablement.
We have tryed many variations in Integration Builder, but all
produce errors in SUS. The test tool in Integration Builder also shows errors
for certain message types. The message type ORDERS.ORDERS02
needed to be added manually, and did not come along with the scenario.
Edited by: Bill Guderian on Mar 19, 2010 4:53 PM

Any clue from here.
Note 936003 - ERS Invoice causes conversion error within SRM
When the SRM system attempts to process an ERS Invoice sent from the MM backend, a PARSE_APPLICATION_DATA CX_ST_DESERIALIZATION_ERROR fault is thrown.
Other terms
CX_ST_DESERIALIZATION_ERROR PARSE_APPLICATION_DATA SUS SRM EBP ERS Invoice XI Exchange Infrastructure Mapping
Reason and Prerequisites
This error will occur when the IDOC does not have a VPREI value; it is the result of an error within the divide logic of the XI mapping operation. This operation is performed within the XI system. A calculation of NETWR/MENGE is performed; however, the result is not properly formatted. As such, 72.30/10 produces a result of 7.2300002. This value is too long for the inbound SRM proxy and hence the error is thrown.
Solution
The solution to this problem is to add a FORMATNUM function within the XI mapping operation. This restricts the result to 2 decimal places, which adheres to the definition of the inbound proxy.
Step by step directions on how one implements the FORMATNUM function are as follows:
1. Log into the XI system with SAPGUI
2. Start the Integration Builder:Design tool (for steps on how to do this, review the steps below):
    a. Run transaction sxmb_ifr
    b. This will cause a browser to come up. Select the Integration Repository link
3. In the left pane, select the Objects tab
4. Navigate to the SAP SRM SERVER ' SAP SRM SERVER 5.0 ' http://sap.com/xi/SRM/SupplierEnablement/Global --> Mapping Objects --> Message Mappings folder
5. Double-click on MM2SUSInvoice
6. The right pane will display the mapping object
7. Select Edit mode
8. In the box that contains the output (Message Type: InvoiceRequest), navigate to InvoiceRequest ' Invoice ' Item ' Price ' NetUnitPrice
9. Double-click on the Amount element and you should see the mapping, represented graphically in the bottom pane
10. In the status line of the graphical editor, select Arithmetic from the list box:
11. To the right of the listbox, scroll until you see the FormatNum function
12. Click on FormatNum, which will cause the function to be added to the graphical editor. You may drag the box as desired
13. Select the connection that binds the if/then/else to the Amount box by grabbing the arrow within the input of the Amount
14. Release the drag of the connection while over the input to the FormatNum box. This will reassign the output of the if/then/else to the input of FormatNum
15. Create a connection between the output of the FormatNum box and the input of the Amount box. You accomplish this by clicking within the output and releasing within the input (respectively).
16. Save the modified mapping object
17. Activate the changes
    a. In the left pane, select the Change Lists tab
    b. Navigate to the Standard Change List entry
    c. Right-click the Standard Change List entry and select Activate
    d. Select only MM2SUSInvoice if more than one item is available, and press the Activate button
18. This will complete the required modification.

[TV@Master] Possible IRQ conflict?

Similar Messages

Maybe you are looking for