[TV@Master] TV@nywhere master and DScaler 4.1.11

hi there,
over the weekend i thought i would try out a program that claims to be able to run my TV@nywhere master. that program is DScaler 4.1.11
The program says it supports the CX2388x chipset so i thought i would play it safe and uninstalled MSIPVS and drivers and start with a cold boot, the program installed without problems, auto detecting my card, and starting up just fine. once running i had video but could not get sound, after playing with it for awhile i still could not get sound so i decided to uninstall the program and reinstall MSIPVS and drivers. I did this the same as i did before, uninstalled, powered off, powered on, shut down anything running in the background, reinstalled drivers from the cd, reinstalled MSIPVS and radio, after install, rebooted, then set up MSIPVS as i had done before (before DScaler everything worked just fine including the remote) when i had the program set up i noticed i had no sound so i checked my settings (nothing different than before), checked the device manager to make sure windows knew the card was there and no conflicts or problems and found nothing out of sorts. at this point i began to worry so i uninstalled and reinstalled with the same results, i also tried the beta drivers and the newer MSIPVS with the same results, video with no sound (when you turn the volume way up you can hear a crackling sound) at this point i was getting pretty so i spent the next few hours trying to find out what had happened. i posted on there site asking for help but no response so far.
from what i've read on there forum an early version of DScaler trashes the EPROM on the TV@nywhere master (i hope this is not the problem!) but that issue was supposed to be fixed with later versions of the program.
I am at my wits end at this point. Not sure what to try next except filling the card in the circular file
can anyone give me some ideas on what to do? does MSI have a utillity availible to fix things like this?
one thing is for sure DScaler will never see any rig i build from now on!

IT LIVES AGAIN!!!!!!!!
Hi there!
I just wanted to post an update! i got my card working again with much better results than before!! Stu you should see the picture i get and hear the sound quality!!
alright! i'll write this down before i forget what i did. first thing i did was to uninstall MSI drivers and MSIPVS and Radio, then i downloaded DScaler 4.1.8 and the reflasher utility, then i installed DScaler, then i unpacked the reflasher to DScalers program folder and ran the tool, after that i uninstalled DScaler and powered off my rig, next i powered up and after closing anything running in the background i installed the drivers Stu posted then i powered down again. after powering up and closing everything i installed MSIPVS from the original CD that came with the card and the radio that Stu posted, powered down again, restarted and set up MSIPVS great vidio but no sound then i started looking for a work around, i decided to run composite cables from my dish setup. vidieo to the tuner and audio to the sound card with the spliter that came with the card. got picture but no sound then i started checking other things, "line in" is in my volume control and wasn't muted so i opened up my "sound manager" (my board has the Realtec ALC850 chipset) and started messing around with the settings there, after going thru 2 or 3 different configurations i let it auto detect and sudenly i got sound!! (i tried auto detect first with no results) so at this point i thought i might push my luck, removed the composite cables and hooked the cable back up then restarted MSIPVS, went to setup and set it up choosing cable and line in, i ran the channel search and got vidio and sound!!!!!!
i'm not sure what happened because before DScaler everything worked fine (sound and video not as good as i wanted) after all this i get a great picture and great sound!! no noise in either!!
so far so good! now that's behind me i won't be messing with alternative programs and the TV@nywhere master again!!
i really hope this helps someone else find a way to get there card back up and running!!

Similar Messages

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

Problem with Master and Child table

Hi,
Working in jdev 11.1.1.2.0. I have one strange issue. i have master and child tables, the model is working fine with the view link. but when drag drop the same into my jsff. when i query the result 1st time 2 tables are refershing properly and data is coming. but the when i trying to select another row in the 1st table my 2nd table(child table) is not refreshing.
i put partial trigger of the 2nd table as 1st table id.
can any one help wht is issue here.
Edited by: user5802014 on Jul 15, 2010 3:44 PM

Check this post might help you
http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html

Report for abserving changes made to the customer master and moniter

Report for abserving changes made to the customer master and moniter and detail
Please send with t. code.

Hi Dhari,
Well the requirement seems very simple but its not as simple as it looks.
i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
1. pick up an cube that builds on emp transaction data.
2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
4. create a info object say indicator and add it to the cube
5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
4.now build one more cube for holding the changed records from this cube and call it say zhrchange
5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
hope this helps.

ADF BC - One Master and Two Detail pages How To?

I have an existing ADF BC .jspx master-detail page that works fine. It shows one product as the master (read-only; no navigation controls) and assocatied customer feedback as the detail (multiple records; read-only.) Now I also want to compute some averages from the same table used to create the detail view object. I have created a second view object because this requires a separate query that calculates aggregate values. I want to take advantage of using view links so that this 2nd view object is automatically linked to the master record via the primary key.
My question is how can I link this into the existing master-detail data control so that I can drag/drop it to include id on the existing .jspx page and the primary key linkages will be handled automatically?
Tables
Product
Feedback
View Objects
ProductView
FeedbackView
FeedbackAVGView
Current ViewLink
ProductFeedbackViewLink = ProductView + FeedbackView
Current DataControl
ProductFeedbackViewLink-Instance
Data Control is displayed on .jspx page; want to also include 3rd View Object, FeedbackAVGView, in the Master-Detail relationship and display on the .jspx page

Thanks for the reply. The existing customer feedback view object displays the customer's text feedback (testimonials) - these will be displayed in a read-only table with multiple records.
The new view object aggregates the ratings score from the customer feedback (same FEEDBACK database table) and will use a form to display the results (not multiple rows.) The PK is included in the aggregate view object query.
Note there is already an existing viewlink between the PK (Master) and FK (Feedback) - in the data control, this viewlink is an instance of the Master View Object and the Customer Feedback View object. Now that I have created a third view object, should I create another View Link between the Master View Object and the Customer Feedback AVERAGES View Object? If I do this, how do I include it in the existing .jspx page? If I add this new View Link to the Application Module I will have two different Data Controls:
Data Control #1: Master (Product) View Object + Customer Feedback View Object #1 (implemented as a master-detail read-only form/table on a .jspx page)
Data Control #2: Master (Product) View Object + Customer Feedback AVG View Object #2
I'm confused as to how to integrate the second customer feedback view object into the existing Data Control / Master-Detail read-only form/table on my .jspx page?
thanks

Master and detail in the same page

db11xe , apex 4.0 , firefox 24 ,
hi all ,
i am trying to insert the master and detail data in one step in the same page :
i have two tables (clients) and (tests_administered)
the client table's region contains theses items
client_id
client_name
the other table's region contains these columns -- the tabular region
row selector
test_admin_id -- pk, hidden
client_id -- hidden , this is the one i should populate with values
and more columns
i've done this :
1- removed the condition of the tabular region .
2- Added the request CREATE to the list in condition of the APPLYMRU process -- or :request like ('CREATE')
3- Added new process with following code : -- with sequence before the applymru process and after process row of clients process
for i in 1..apex_application.g_f02.count
loop
apex_application.g_f02(i) := :p2_client_id ;
end loop ;
but nothing happened . why ? what did i miss ?
thanks

Hi,
Create a Master Detail Form through the APEX Wizard
Make sure you choose the Primary Keys for the Master Detail as one of your Column and not the ROW ID.
Selecting an existing Sequence for the Primary Key is preferred.
Select the option the where your Master and Detail appears in the same page.
Initially when you run the page your master and detail will not appear at the same time in the page when your Master Detail Form is in the entry form mode. For this you have to go to your Tabular Form(Detail Form) region, and below you will have to remove the Condition for the display of your Tabular form and set it to “No Condition”.
Now when you run the page both the Master and Detail form will appear together in the create mode but you will not be able to insert or create both master and detail records at the same time when u click the create button. For this the following needs to be done: You need to create a PL SQL Tabular Form process :
Let's say your master form is based on DEPT and your detail tabular form is based on EMP. Make sure the following things are configured:
The DEPT insert/update DML process runs before the new tabular form PLSQL process. (ie) the new PL SQL Tabular Form Process that you create should be inbetween Automatic Row Processing(DML) and Multi Row Update Process , so create the new Tabular Form Pl SQL process with a sequence number inbetween these two Processes.
Make sure you choose Tabular form while creating this PL SQL process.
The new tabular form PL/SQL process executes the following as the source
:DEPTNO := :P1_DEPTNO;
Where DEPTNO is the Foreign Key column in the Tabular Form that links the Primary Key Item P1_DEPTNO of the Master Form.
Finally this new PL SQL process conditionally runs when DEPTNO is null, so you need to add the following condition to the process:
The final step to accomplish in creating both the Master and Detail records at the same time is to make a change in the condition of the Multi Row Update Process. :request in ('SAVE','CREATE') or :request like 'GET_NEXT%' or :request like 'GET_PREV%'
-We make this change so that records get inserted into the Detail table when we click the ‘’Create” button.
Now you can Run your page and create both the Master and Detail records at the same time.
Thanks and Regards,
Madonna

How to create one Oprations button (Create Button Or CreateInsert Button )for all master And Detail block?

hi
I have master And Detail with 4 level ,I want to have on operations button for all block in data control .
(similar to Oracle form toolbar)
how to do it ?

Well, if you tell us your jdev version and what exactly you try to do, without just telling us 'as in forms' we might be able to help.
Most of us don't know how it's done in forms. So be specific when you describe your use case.
Timo

Show master and detail viewobjects in the same jsp

I have two viewobjects which have a master-detail relationship (a viewlink between them).
What I want to do is to show both the master and the detail data in the same jsp, i.e for every row in the master viewobject I want to show all the rows in the detail viewobject.
I tried to drop the master vo on the page from the component palette and then the detail vo next to the master vo, but then only the first row in the detail vo is shown on the page. I want all of them to be shown.
Can anyone please point me in the right direction here?
Ps: I'm using JDeveloper version 9.0.5.2
Thanx a lot
Tom

I dropped both viewobjects as read-only tables and they both have the rangesize set to -1.
I think I made myself a bit unclear when asking my question. I do not want a "normal" master-detail view in my jsp where you see one masterrow and all the detailrows. I want my page to show all the masterrows with all their corresponding detail rows listed under the master row.
The pseudocode may look like this:
for each row in MasterViewObject loop
<<display data in MasterViewObject>>
for each row in DetailViewObject loop
<<display data in DetailViewObject>>
end inner loop
end outer loop
As you see I have a double loop here. Is somehing like this possible without "manually" doing all the stuff?
Thanx
Tom

How to make one Mac the "master", and the other Macs "secondary"?

When using ISync to my DotMac account, and using three or four Macs all synching to one DotMac account, is it possible to designate one particular Mac to be the "most important" or "parent" Mac, and then all others, (laptops), be less important?
I just want the Address Book on the main machine, the G5 Desktop, to always take precedence, and never get overwritten in any way, by a less refined Address Book on a laptop traveling machine.
Thank you.

iSync (or rather .Mac Sync is what you are referring to) does not work like that.
There is no master and slave relationship in synchronising. All devices are equal and all devices sync their data to all other devices equally. That is what true synchronising is.
What you are proposing is not synchronising - it is a simple copy and replace operation from one source, and the SyncServices framework is not designed for that.
The whole point of synchronising is to get away from having a Master data source. You can change data on ANY device (Mac, phone or PDA) and the changes will be synced to all other devices.

How to use ale/idocs in sap crm to transfer master and transactional data

hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudhary

Kavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi

Bapi For creation and change for Vendor Master and Customer Master

I am looking for BAPI to create and change Vendor Master and Customer Master which will not take me to standard SAP transaction but will work in the background
Explanation: BAPI to delete material (BAPI_MATERIAL_DELETE) take you to standard SAP screen of T-Code MM06 but BAPI to create material (BAPI_MATERIAL_SAVEDATA) creates material in the background i.e. does not take you to standard SAP screen of T-Code MM01
So in my case (i.e. to create and change Vendor Master and Customer Master ) I want BAPI which would work like BAPI to create material (BAPI_MATERIAL_SAVEDATA)

For general information,to find BAPIs associated with any business object :
Transaction : BAPI - choose alphabetical tab - Find customer - (right side choose - tools - create bapi list and search ) , you will get all the BAPIs associated with this particular business object
Mathews

Failed to insert both in master and detail tabels

Hello everyone,
I have a form with a master-detail relation between two data blocks. The master data block gets data from a view (of two tables). Insert in this block alone works.
If I add a record in master block and one in the detail block than, when I save changes, I get the following error:
ORA-02291: integrity constraint (MASTER_DETAIL_FK) violated - parent key not found.
The MASTER_DETAIL_FK constraint is set on FK column from detail table and references PK column from master table.
It looks like Forms try to insert first into the details block and than into master block, but I can not control this. In addition, if the master block is based on a table (not a view), I can add both a master and a detail record and save works ok.
I'm looking forward to a solution to this problem.
Best regards,
Lucian

Hi Kamran
take 2 groups in the datamodel .place one below the other in the layout.
Thankyou
[email protected]

Single Standard data source which extracts material master and vendor master data

Hi all,
I have a client requirement where user wants to view material master and vendor master in a single report. Is there any standard data source which extracts both the data together..
Thanks!
Arvind

Hi,
Two are different master info objects and can't get them from one data source.
think about multi provider or info set on two master data objects to club them.
Info object - 0MATERIAL and data source - 0MATERIAL_ATTR
Info object - 0VEDNOR and data source - 0VENDOR_ATTR
Thanks

Vendor Master and Customer Master for FI AP/AR

hi FICO Gurus,
I am Sapna here and I have questions regarding the Mandatory fields for Vendor Master and Customer Master which would be mandatory for Running FI AP and AR. I am basically a MM Consultant but I have been asked to perform this role of Master Data at my current client.
I am quite familiar with the fact that these feilds are based on the needs of the bussiness and can be configured in IMG as required/optional or suppressed or diaplsy only.
What I am looking is
1. Are there any fileds list which is <b>Mandatory</b> for running FI AP/AR in global financial implemntation.
2. Also from FI Perspective what is <b>Good to have/Recommended fields</b> in Vendor Master and Cusotmer Master for Global Finacial implemtation.
Your help is greatly appreciated. Please point me in right direction...

OK all implementations are different so the client should have some imput here.
However you need to make sure certain address details are mandatory such as name, post code street and city.
You may always want an e mail address or phone number.
All AR & AP customer/ Vendors will need a recon account, so it is important there is one set up, but you also need to make sure in change mode this cannot be changed.
For Vendors you will require some kind of bank details and payment method.
For Customers if Dunning is being used you may need the Dunning Procedure and Accounting Clerk.
Also for a Customer there is the Sales Org view, and it is best to contact the SD consultant to see which fields are required here. The tax code, payment terms are normally mandatory.
For the Purchasing Org, I guess you would know about this...
Hope this helps.
Award points if useful.

How to get legacy customer no. while uploading Customer master and vendor

Hi All,
I want to upload Customer master and Vendor master data from legacy using LSMW. I am using SAP standard programs available for the same. I am using internal number assignment in SAP for these masters.
I case of material master these is a field in MARA named BISMT which is populated with old material no. used in legacy. Is there any corresponding field for customer and vendor master upload?. Moreover is this field automatically populated by SAP report while uploading?.I want to know which old material no. is mapped to which new internally generated number.
Your feedback is highly appreciated.

Hi,
if you are looking for a field in customer and vendor master data that should contain the old (legacy number), take a look at knb1-altkn and in case of a vendor at lfb1-altkn.
regards
Siggi

[TV@Master] TV@nywhere master and DScaler 4.1.11

Similar Messages

Maybe you are looking for