TV miglia max and iMac G4: problems

Hi all,
I have a problem with my Mac G4 1Ghz. I brought the new Tv Miglia Max but I can't install it( it doesn't finish the guided installation). My model should have 3 USB 2.0 ports but it seems the computer doesn't "see" tv miglia Max.
Someone could help me?
Thanks
PS.
On a iMac G5 installation was succesful

Hello and Welcome to Apple Discussions.
Are you using a Universal Binary version or a PowerPC version through Rosetta?
EyeTV2.3 is just out so try downloading that.
mrtotes

Similar Messages

Help with 655 Max and Possible Memory Problems...

Just recieved my 655 Max and have put my system together, but when I turn it on it makes a constant beeping sound. I tried taking out both memory sticks, lol, and turning it on and the sound stops, I tried putting in one memory stick and the sound starts again.
I suppose this is a memory problem.
by the way I am using Corssair 256mb CMX256a-3200C2 memory.

[The alarm that you are getting is the CPU Fan Alarm you will have to diable it in the Bios. I am using a Vantec Aeroflow heatsink and my CPU alarm also is constantly on and was very annoying till I disabled it. My system still doesn't boot to XP yet as I have RMA'd bothe the MB and Ram. QUOTE]Originally posted by TritonB7
Hey Kaiguy the comp does continue to make sounds till I shut the system off. And I'm not sure how a standard pc tone sound would sound like, :(. But it does make beep followed by a lower pitched beep, and it repeats this till I shutdown the system.
(1) I cannot Access Bios.
(2) I have two sticks of Corsair 256mb CMX256a-3200C2 memory. I do not have any other ram available that will be compatible with this motherboard. Ive tried using one stick at a time in each of the slots. No Luck.
I highly think that both sticks not working is very unreal.
(3) and reseting bios by the jumper isnt working either.
I can probably try buying some diffrent memory, or returning the whole mobo and exchanging it for the same one.
By the way on my monitor when i turn the comp on it says 8x Extreme or something close to it while the comp is beeping. I doubt that, that has anything to do with it. This is my first MSI board :( , I've always been an Asus person but Im still open for MSI i'm sure I just recieved a faulty board.
[/QUOTE]

MAX and GROUP BY Problem

Hi I am trying to execute the following query using an OracleCommand:
SELECT P.Name,P.Version,P.AssemblyName,P.AssemblyVersion FROM Plugin P
JOIN (SELECT Name,MAX(Version) AS Version FROM Plugin WHERE Disabled=0 GROUP BY Name) D ON P.Name=D.Name AND P.Version=D.Version
ORDER BY CASE WHEN P.AssemblyName LIKE '%resources%' THEN 0 ELSE 1 END
Every time I run it I get the following exception:
ORA-00979: not a GROUP BY expression
However when I run this in SQL Developer no error is returned and the results are as expected.

Hi,
On Further investigation I have found the problem lies in the LIKE statement, when the '%' are present the error is produced. However on removing the '%' no exception is raised, for example:
SELECT P.Name,P.Version,P.AssemblyName,P.AssemblyVersion FROM Plugin P
JOIN (SELECT Name,MAX(Version) AS Version FROM Plugin WHERE Disabled=0 GROUP BY Name) D ON P.Name=D.Name AND P.Version=D.Version
ORDER BY CASE WHEN AssemblyName LIKE '%resources%' THEN 0 ELSE 1 END
Error: ORA-00979: not a GROUP BY expression
This is an extract from the trace file:
Trace file c:\app\tim\diag\rdbms\orcl\orcl\trace\orcl_ora_2560.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1037M/2047M, Ph+PgF:1876M/2669M, VA:1271M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 38
Windows thread id: 2560, image: ORACLE.EXE (SHAD)
*** 2008-10-01 11:48:22.234
*** CLIENT ID:() 2008-10-01 11:48:22.234
*** SERVICE NAME:() 2008-10-01 11:48:22.234
*** MODULE NAME:() 2008-10-01 11:48:22.234
*** ACTION NAME:() 2008-10-01 11:48:22.234
opiino: Attach failed due to ORA-12537
Trace file c:\app\tim\diag\rdbms\orcl\orcl\trace\orcl_ora_2560.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:912M/2047M, Ph+PgF:1699M/2669M, VA:1224M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 30
Windows thread id: 2560, image: ORACLE.EXE (SHAD)
*** 2008-10-09 10:25:57.482
*** SESSION ID:(133.7753) 2008-10-09 10:25:57.482
*** CLIENT ID:() 2008-10-09 10:25:57.482
*** SERVICE NAME:(orcl) 2008-10-09 10:25:57.482
*** MODULE NAME:(WindowsFormsApplication1.vshost.exe) 2008-10-09 10:25:57.482
*** ACTION NAME:() 2008-10-09 10:25:57.482
XCTEND rlbk=0, rd_only=1
WAIT #3: nam='SQL*Net message to client' ela= 33 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=156669369456
*** 2008-10-09 10:25:58.042
WAIT #3: nam='SQL*Net message from client' ela= 561231 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=156669930768
=====================
PARSING IN CURSOR #3 len=168 dep=1 uid=52 oct=47 lid=52 tim=156669947688 hv=337957580 ad='29fe2fa8' sqlid='a6u3yjca29nqc'
declare
m_stmt varchar2(512);
begin
m_stmt:='delete from sdo_geor_ddl__table$$';
EXECUTE IMMEDIATE m_stmt;
EXCEPTION
WHEN OTHERS THEN
NULL;
end;
END OF STMT
PARSE #3:c=0,e=368,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,tim=156669945936
BINDS #3:
=====================
PARSING IN CURSOR #5 len=33 dep=2 uid=52 oct=7 lid=52 tim=156669958521 hv=1949913731 ad='29fe2cd8' sqlid='3972rvxu3knn3'
delete from sdo_geor_ddl__table$$
END OF STMT
PARSE #5:c=0,e=99,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=1,tim=156669958489
BINDS #5:
EXEC #5:c=0,e=339,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=1,tim=156669958974
STAT #5 id=1 cnt=0 pid=0 pos=1 obj=0 op='DELETE SDO_GEOR_DDL__TABLE$$ (cr=0 pr=0 pw=0 time=0 us)'
STAT #5 id=2 cnt=0 pid=1 pos=1 obj=62986 op='TABLE ACCESS FULL SDO_GEOR_DDL__TABLE$$ (cr=0 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
EXEC #3:c=0,e=1165,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,tim=156669959224
XCTEND rlbk=0, rd_only=1
WAIT #4: nam='SQL*Net break/reset to client' ela= 35 driver id=1413697536 break?=1 p3=0 obj#=-1 tim=156669959556
WAIT #4: nam='SQL*Net break/reset to client' ela= 794 driver id=1413697536 break?=0 p3=0 obj#=-1 tim=156669960406
WAIT #4: nam='SQL*Net message to client' ela= 28 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=156669960506
*** 2008-10-09 10:26:00.585
WAIT #4: nam='SQL*Net message from client' ela= 2468066 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=156672428682
=====================
PARSING IN CURSOR #5 len=168 dep=1 uid=52 oct=47 lid=52 tim=156672446116 hv=337957580 ad='29fe2fa8' sqlid='a6u3yjca29nqc'
declare
m_stmt varchar2(512);
begin
m_stmt:='delete from sdo_geor_ddl__table$$';
EXECUTE IMMEDIATE m_stmt;
EXCEPTION
WHEN OTHERS THEN
NULL;
end;
END OF STMT
PARSE #5:c=0,e=101,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,tim=156672446082
BINDS #5:
=====================
PARSING IN CURSOR #3 len=33 dep=2 uid=52 oct=7 lid=52 tim=156672446966 hv=1949913731 ad='29fe2cd8' sqlid='3972rvxu3knn3'
delete from sdo_geor_ddl__table$$
END OF STMT
PARSE #3:c=0,e=99,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=1,tim=156672446935
BINDS #3:
EXEC #3:c=0,e=345,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=1,tim=156672447601
STAT #3 id=1 cnt=0 pid=0 pos=1 obj=0 op='DELETE SDO_GEOR_DDL__TABLE$$ (cr=0 pr=0 pw=0 time=0 us)'
STAT #3 id=2 cnt=0 pid=1 pos=1 obj=62986 op='TABLE ACCESS FULL SDO_GEOR_DDL__TABLE$$ (cr=0 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
EXEC #5:c=0,e=1319,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,tim=156672447883
XCTEND rlbk=0, rd_only=1
WAIT #4: nam='SQL*Net break/reset to client' ela= 33 driver id=1413697536 break?=1 p3=0 obj#=-1 tim=156672448189
WAIT #4: nam='SQL*Net break/reset to client' ela= 746 driver id=1413697536 break?=0 p3=0 obj#=-1 tim=156672448992
WAIT #4: nam='SQL*Net message to client' ela= 32 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=156672449093
*** 2008-10-09 10:26:05.561
WAIT #4: nam='SQL*Net message from client' ela= 4958604 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=156677407767
=====================
PARSING IN CURSOR #3 len=55 dep=0 uid=86 oct=42 lid=86 tim=156677408531 hv=2217940283 ad='0' sqlid='06nvwn223659v'
alter session set events '10046 trace name context off'
END OF STMT
PARSE #3:c=0,e=168,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=156677408498
EXEC #3:c=0,e=933,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=156677409605
Removing the '%'
SELECT P.Name,P.Version,P.AssemblyName,P.AssemblyVersion FROM Plugin P
JOIN (SELECT Name,MAX(Version) AS Version FROM Plugin WHERE Disabled=0 GROUP BY Name) D ON P.Name=D.Name AND P.Version=D.Version
ORDER BY CASE WHEN AssemblyName LIKE 'resources' THEN 0 ELSE 1 END
Error: None
Then i tried just having the ORDER BY without the JOIN
SELECT P.Name,P.Version,P.AssemblyName,P.AssemblyVersion FROM Plugin P
ORDER BY CASE WHEN AssemblyName LIKE '%resources%' THEN 0 ELSE 1 END
Error: None
So the problem seems to lie in having a GROUP BY with a LIKE in ORDERBY. Has anyone got any idea on what may be causing this?
Edited by: rishi@invar on Oct 9, 2008 10:18 AM
Edited by: rishi@invar on Oct 9, 2008 10:27 AM

C4850 and iMac wireless problems.

Iv'e had a look through all the other threads on this subject and havn't been able to find a solution.
I set up the printer which works fine in the USB, but I can't get it to work through the built in Airport Extreme on my iMac.
I go through the set up procedure for setting up on a wireless network after the software returns the IP settings for the printer I hit continue that tells me the device is not reachable. I've had a look through all the airport set up screens I can find. I don't know if the problem is with the airport setup or the printer. Any help would be appreciated.

Let's try a shortcut. You'll need to know the SSID of your wireless network, the type of security (none, WEP or WPA-PSK) and the if you have encryption enabled, the security key.
First, disconnect the USB cable and reset the printer's network configuration. You can do this by pressing the wireless button, then wireless settings, then scroll down to Restore Network Defaults and press OK. After a few moments, the blue LED will turn off indicating that the radio turned off. This indicates that the printer's network configuration has turned off.
Next, turn on the radio by selecting Enable Wireless. At this point, the printer is setup in Ad-Hoc mode using the SSID hpsetup.
Now, connect to the printer's wireless network named hpsetup. Once you've connected, start Safari, open Bookmarks and then Show All Bookmarks. On the left pane, select Bonjour and you should see the C4850 printer listed. Select this bookmark and the printer's webpage should appear.
Next, select the Networking tab on the printer's webpage followed by the Advanced tab. On the webpage form, enter the SSID of your wireless network, select Infrastructure and the type of encryption. Finally, enter the security key (if necessary) and then select Apply.
If all went well, your Mac will disconnect from the printer's wireless network hpsetup as the printer connects to your home's wireless network. Reconnect your Mac to your home network.
Last step is to create the print queue. Go to System Preferences, Print and Fax and press the plus sign to add a new printer. You should see the C4580 listed. Select this and the Mac should find and add your printer.
You now have basic wireless printing setup. If you want to scan from your Mac using the C4580, you'll need install the HP printer driver that you can download from www.hp.com
I hope this helps.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

Back button only works about 50% of the time. Have to hit it twice, sometimes three times before it works. Problem is intermittent. Firefox 3.6.10 on Mac OS 10.6.4 (same on both MacBook and iMac machines).

Back button only works about 50% of the time. Have to hit it twice, sometimes three times before it works. Problem is intermittent. Firefox 3.6.10 on Mac OS 10.6.4 (same on both MacBook and iMac machines).

You can try http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

My USB CF Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore. It was last week and worked fine to get pictures from my camera. Now it won't mount. I have tried another card reader and the same problem exists. Also tried different cards..

Hi
My USB CF (Compact Flash) Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore.
Last week it worked fine to get pictures from my camera but now it won't mount at all.
I ejected it in the correct way rather than just disconnecting it but now i cannot get it to remount!
I cannot even see it in the disk utility or system profiler.
I have tried another card reader (a brand new one bought today) and the same problem exists. I've also tried different cards to see if that made a difference and they still arent being picked up on the Mac.
I have done all the usual things like rebooting, unplugging all other USB devices and then trying but nothing has worked.
I'm a photographer and I'm at my wits end here. I know the cards are fine as i have been using them without issue and they are also new.
Note: If I plug the camera in directly to the Mac, the Mac picks it up just fine as it always has done. Its just the card readers that it wont pick up anymore.
If anyone has any ideas at all other than the following (my so called friends advice) you'd earn my undting love:
Buy a PC
Use the camera (Thats why i bought the reader in the first place - importing RAW files from the camera is SLOW!)
Replace your CF cards (I have three 8GB cards two of which i had never used til today and they dont work either!)
Buy a new card reader (this is the 5th one in two days - none work on the Mac)
Many thanks in advance!
LIsa

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Displaying actual Max and Min in the report header problem...

Hi guys,
I have the following problem.
1. I have a multi select prompt where you pick 2 years.
2. I have the following columns. Year, Month, Exp, calc YEAR (max), calc year (min)
3. I need to get the max and min month across all rows. So far I've tried MAX, MIN, RMAX, and RMIN without success. However, it's not picking them along all rows. For example,
2001 1 100050 2001 2001
2002 1 244005 2002 2002
I'm sure this has to do something with my aggregation in the calculated column, but not quite sure where exactly.

do max(max(year)) and min(min(year))
:)

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

Why does my 08 iMac display flashing and partial window problems?

I have a 2008 iMac with OS X 10.9.2 with 4Gb memeory. In the past week we have experienced partial windows pop up and have unable to close the windows. The problem is resolved by restarting the computer. This has happened about four times in the last week. Today I was using a window and notice flashing when I clicked the mouse with partial windows I had been using previously began appearing on the screen. Any input would be appreciated. Up until this point I have had no problems with this iMac.

Update - I spent a half hour on the phone with AppleCare this morning and we were unable to resolve the issue. I then took both my display and iMac to the Apple Store today and the Genius Bar not only replaced my iMac - they replaced my 24" Cinema Display with a BRAND NEW 27" Cinema Display! The Genius said that Apple's engineers wanted to research why my display was flickering using the exact display and iMac. Incredible service! And a brand new display!

I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. Is there a place I can download Apple Works 6 onto my computer?

I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?

AppleWorks has never been available for legal download.
Have you done the usual trouble shooting steps:
Quit AppleWorks
Delete most or all of the Recent Items list.
Remove the Preferences files to the Desktop or to the Trash.
Launch AppleWorks to see if the problems remain.
You'll find Recent Items in:
username > Documents > AppleWorks User Documents > Starting Points > Recent Items
There are several preferences files.
Go to:
username > Library > Preferences
Locate, select and delete the file com.apple.appleworks.plist
Still in the Preferences floder, locate and open the folder AppleWorks.
Select and delete the two Cache files and the Preferences file.
Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
Regards,
Barry

Can i run autocad 3d, 3ds max and autodesk inventor on imac?

Hello you all!
I'm ready to buy an i-Mac for my work, but first I need to be 100% sure that it runs AutoCAD 3d. I would really need Autodesk 3ds Max and Autodesk Inventor as well, but I can live without.
Please let me know if anyone knows, and aslo (as I never had anything to do with mac computers) I'd like to ask if I'll be able to keep updating these softwares whenever needed.
Last, does anyone know specifically what specs should I focus on among operating systems or other things when deciding which i-Mac to buy?
Thanks a lot guys!
Christina

Very simple to find out, look at the system requirements for the apps and then compare to the iMac you are interested in. As far as updating the apps that isn't a question to ask here, you need to contact the developers or even better just visit their website periodically to see if updates for their products are released. If the app's are available from Apple's App Store then updates would be released from teh App Store. If you are not familiar with the App Store please click:
http://www.apple.com/osx/apps/app-store.html?cid=wwa-us-kwg-mac-com&siclientid=5 899&sessguid=96a06dba-3ee0-4df6-9e13-a0a08104279c&userguid=96a06dba-3ee0-4df6-9e 13-a0a08104279c&permguid=96a06dba-3ee0-4df6-9e13-a0a08104279c
for information.
BTW if you don't feel comfortable with this answer then i'd recommend contacting Autodesk and asking what hardware specifications they recommend for an iMac and also visiting your local Apple Store.

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

My iMac is not staying connected to my wireless internet. Any suggestions? My provider says it's a computer issue and not their problem.

My iMac is not staying connected to the wireless internet. My provider tells me it's a computer issue and not their problems. Any suggestions?

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Imac display problem, the resolution seems to be unusual, top bar and all folders on the desktop background is off the screen

Need help with 21" imac display problem. The resolution seems to be unsual, everything on the desktop background goes off the screen. The resolution is set at 1920 x 1080

Quit the game and restart the iPad.
To quit the game - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

TV miglia max and iMac G4: problems

Similar Messages

Maybe you are looking for