Tv monitor no longer the right dimentions
I've been using my Samsung TV as a second monitor for a while now and it worked fine untill a few months back I updated the software on the TV and now there is a 1cm black gap down the right hand side where it meets my Mac and I lose 1cm off the left side. If any1 knows how to fix this pls let me know.
Thanks in advance
Nick
Maybe the program you downloaded changed some settings, but I don't think this is a hardware problem at all.
Similar Messages
-
Using a calibration target with a waveform monitor to get the right contrast?
I was wondering if I am using this target correctly with the waveform monitor to achieve the right amount of contrast.
Dave
You are doing it kind of wrong.
What you should use that Black /Grey White TOOL for is to set an exposure at the camera. (NOT in Post Production..but it does have an application in post)
If your Camera has the Zebras set at 95-100% White...you would point camera at the "TOOL" and adjust exposure so that the zeras display on the white section. You can not do anything about the black. (It will fall into place from the exposure on the white)
Now the above assumes that as a photographer...you actuall want the white level to photograph as white for the particular shot that you are taking.
Exposure is all about tones. Black to white thru grey tone actually. (Forget about color)
Hope this helps but I am happy to expand if you wish. -
External monitor shifted to the right
i just got an external monitor (acer v223W) which support max resolution of 1680x1050. but when i try and use xrandr like:
xrandr --output LVDS1 --mode 1440x900 --output VGA1 --mode 1680x1050 --right-of LVDS1
what i see is shifted by about 100px or so to the left. so on my right had side i have a black bar and when i move a window from my external monitor to my laptop i can tell that the window disappears for a bit before staring to show up on my laptop. before i had a different monitor with max resolution of 1600x900 and xrandr worked great.
here is the info that i gathered:
- my laptop is (almost) up to date on all software
- it has two video cards: intel (which is the one i use) and nvidea (i disabled it in bios).
- i have intel video drivers installed:
: pacman -Qs intel
local/intel-dri 7.10.2-2
Mesa DRI drivers for Intel
local/xf86-video-intel 2.15.0-1 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
- here is what xrandr says
: xrandr -q
Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
1440x900 60.3*+ 50.1
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1680x1050+1440+0 (normal left inverted right x axis y axis) 473mm x 296mm
1680x1050 60.0*+
1600x1200 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
- here is the Xorg log
: cat /var/log/Xorg.0.log
[ 120.021]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 120.021] X Protocol Version 11, Revision 0
[ 120.021] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 120.021] Current Operating System: Linux jss-lenovo-105 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 20:29:33 CEST 2011 x86_64
[ 120.021] Kernel command line: root=/dev/disk/by-uuid/ad7e26d2-8144-4d4c-9c60-df4f7fcceda7 ro
[ 120.021] Build Date: 16 April 2011 12:02:01PM
[ 120.021]
[ 120.021] Current version of pixman: 0.20.2
[ 120.021] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 120.021] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 120.022] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 16 11:44:46 2011
[ 120.111] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 120.130] (==) No Layout section. Using the first Screen section.
[ 120.130] (==) No screen section available. Using defaults.
[ 120.130] (**) |-->Screen "Default Screen Section" (0)
[ 120.130] (**) | |-->Monitor "<default monitor>"
[ 120.130] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 120.130] (==) Automatically adding devices
[ 120.130] (==) Automatically enabling devices
[ 120.180] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 120.180] Entry deleted from font path.
[ 120.213] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 120.213] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 120.213] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 120.213] (II) Loader magic: 0x7d6fa0
[ 120.213] (II) Module ABI versions:
[ 120.213] X.Org ANSI C Emulation: 0.4
[ 120.213] X.Org Video Driver: 10.0
[ 120.213] X.Org XInput driver : 12.2
[ 120.213] X.Org Server Extension : 5.0
[ 120.214] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2112 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 120.214] (--) PCI: (0:0:2:1) 8086:2a43:17aa:2112 rev 7, Mem @ 0xf4200000/1048576
[ 120.215] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 120.215] (II) LoadModule: "extmod"
[ 120.229] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 120.235] (II) Module extmod: vendor="X.Org Foundation"
[ 120.235] compiled for 1.10.1, module version = 1.0.0
[ 120.235] Module class: X.Org Server Extension
[ 120.235] ABI class: X.Org Server Extension, version 5.0
[ 120.235] (II) Loading extension MIT-SCREEN-SAVER
[ 120.235] (II) Loading extension XFree86-VidModeExtension
[ 120.235] (II) Loading extension XFree86-DGA
[ 120.235] (II) Loading extension DPMS
[ 120.235] (II) Loading extension XVideo
[ 120.235] (II) Loading extension XVideo-MotionCompensation
[ 120.235] (II) Loading extension X-Resource
[ 120.235] (II) LoadModule: "dbe"
[ 120.236] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 120.236] (II) Module dbe: vendor="X.Org Foundation"
[ 120.236] compiled for 1.10.1, module version = 1.0.0
[ 120.236] Module class: X.Org Server Extension
[ 120.236] ABI class: X.Org Server Extension, version 5.0
[ 120.236] (II) Loading extension DOUBLE-BUFFER
[ 120.236] (II) LoadModule: "glx"
[ 120.236] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 120.247] (II) Module glx: vendor="X.Org Foundation"
[ 120.247] compiled for 1.10.1, module version = 1.0.0
[ 120.247] ABI class: X.Org Server Extension, version 5.0
[ 120.247] (==) AIGLX enabled
[ 120.247] (II) Loading extension GLX
[ 120.250] (II) LoadModule: "record"
[ 120.250] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 120.250] (II) Module record: vendor="X.Org Foundation"
[ 120.250] compiled for 1.10.1, module version = 1.13.0
[ 120.250] Module class: X.Org Server Extension
[ 120.250] ABI class: X.Org Server Extension, version 5.0
[ 120.251] (II) Loading extension RECORD
[ 120.251] (II) LoadModule: "dri"
[ 120.251] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 120.269] (II) Module dri: vendor="X.Org Foundation"
[ 120.269] compiled for 1.10.1, module version = 1.0.0
[ 120.269] ABI class: X.Org Server Extension, version 5.0
[ 120.269] (II) Loading extension XFree86-DRI
[ 120.269] (II) LoadModule: "dri2"
[ 120.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 120.270] (II) Module dri2: vendor="X.Org Foundation"
[ 120.270] compiled for 1.10.1, module version = 1.2.0
[ 120.270] ABI class: X.Org Server Extension, version 5.0
[ 120.270] (II) Loading extension DRI2
[ 120.270] (==) Matched intel as autoconfigured driver 0
[ 120.270] (==) Matched vesa as autoconfigured driver 1
[ 120.270] (==) Matched fbdev as autoconfigured driver 2
[ 120.270] (==) Assigned the driver to the xf86ConfigLayout
[ 120.270] (II) LoadModule: "intel"
[ 120.279] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 120.299] (II) Module intel: vendor="X.Org Foundation"
[ 120.299] compiled for 1.10.0.902, module version = 2.15.0
[ 120.299] Module class: X.Org Video Driver
[ 120.299] ABI class: X.Org Video Driver, version 10.0
[ 120.299] (II) LoadModule: "vesa"
[ 120.299] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 120.300] (II) Module vesa: vendor="X.Org Foundation"
[ 120.300] compiled for 1.10.0, module version = 2.3.0
[ 120.300] Module class: X.Org Video Driver
[ 120.300] ABI class: X.Org Video Driver, version 10.0
[ 120.300] (II) LoadModule: "fbdev"
[ 120.309] (WW) Warning, couldn't open module fbdev
[ 120.309] (II) UnloadModule: "fbdev"
[ 120.309] (II) Unloading fbdev
[ 120.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 120.309] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 120.309] (II) VESA: driver for VESA chipsets: vesa
[ 120.309] (--) using VT number 7
[ 120.313] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 120.313] (WW) Falling back to old probe method for vesa
[ 120.314] drmOpenDevice: node name is /dev/dri/card0
[ 120.314] drmOpenDevice: open result is 8, (OK)
[ 120.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 120.314] drmOpenDevice: node name is /dev/dri/card0
[ 120.314] drmOpenDevice: open result is 8, (OK)
[ 120.314] drmOpenByBusid: drmOpenMinor returns 8
[ 120.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 120.314] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 120.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 120.314] (==) intel(0): RGB weight 888
[ 120.314] (==) intel(0): Default visual is TrueColor
[ 120.314] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 120.314] (--) intel(0): Chipset: "GM45"
[ 120.314] (**) intel(0): Relaxed fencing enabled
[ 120.314] (**) intel(0): Framebuffer tiled
[ 120.314] (**) intel(0): Pixmaps tiled
[ 120.314] (**) intel(0): 3D buffers tiled
[ 120.314] (**) intel(0): SwapBuffers wait enabled
[ 120.314] (==) intel(0): video overlay key set to 0x101fe
[ 120.327] (II) intel(0): Output LVDS1 has no monitor section
[ 120.328] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 120.346] (II) intel(0): Output VGA1 has no monitor section
[ 120.347] (II) intel(0): Output DP1 has no monitor section
[ 120.347] (II) intel(0): EDID for output LVDS1
[ 120.347] (II) intel(0): Manufacturer: LEN Model: 4033 Serial#: 0
[ 120.347] (II) intel(0): Year: 2007 Week: 0
[ 120.347] (II) intel(0): EDID Version: 1.3
[ 120.347] (II) intel(0): Digital Display Input
[ 120.347] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 120.347] (II) intel(0): Gamma: 2.20
[ 120.347] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 120.347] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 120.347] (II) intel(0): First detailed timing is preferred mode
[ 120.348] (II) intel(0): redX: 0.590 redY: 0.330 greenX: 0.310 greenY: 0.570
[ 120.348] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 120.348] (II) intel(0): Manufacturer's mask: 0
[ 120.348] (II) intel(0): Supported detailed timing:
[ 120.348] (II) intel(0): clock: 100.0 MHz Image Size: 304 x 190 mm
[ 120.348] (II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1800 h_border: 0
[ 120.348] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 907 v_blanking: 922 v_border: 0
[ 120.348] (II) intel(0): Supported detailed timing:
[ 120.348] (II) intel(0): clock: 82.0 MHz Image Size: 304 x 190 mm
[ 120.348] (II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1768 h_border: 0
[ 120.348] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 120.348] (II) intel(0): Unknown vendor-specific block f
[ 120.348] (II) intel(0): AUOB141PW03V0
[ 120.348] (II) intel(0): EDID (in hex):
[ 120.348] (II) intel(0): 00ffffffffffff0030ae334000000000
[ 120.348] (II) intel(0): 00110103801e1378ea24e597544f9227
[ 120.348] (II) intel(0): 22505400000001010101010101010101
[ 120.348] (II) intel(0): 0101010101011027a068518416303020
[ 120.348] (II) intel(0): 340030be100000180320a04851841a30
[ 120.348] (II) intel(0): 3020360030be100000180000000f0095
[ 120.348] (II) intel(0): 0a32950a2814010006af5125000000fe
[ 120.348] (II) intel(0): 0041554f4231343150573033563000cf
[ 120.348] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 120.348] (II) intel(0): Printing DDC gathered Modelines:
[ 120.348] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 120.348] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 120.348] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 120.348] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 120.348] (II) intel(0): Printing probed modes for output LVDS1
[ 120.348] (II) intel(0): Modeline "1440x900"x60.3 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 120.348] (II) intel(0): Modeline "1440x900"x50.1 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 120.348] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 120.348] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 120.348] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 120.348] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 120.366] (II) intel(0): EDID for output VGA1
[ 120.367] (II) intel(0): EDID for output DP1
[ 120.367] (II) intel(0): Output LVDS1 connected
[ 120.367] (II) intel(0): Output VGA1 disconnected
[ 120.367] (II) intel(0): Output DP1 disconnected
[ 120.367] (II) intel(0): Using exact sizes for initial modes
[ 120.367] (II) intel(0): Output LVDS1 using initial mode 1440x900
[ 120.367] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 120.367] (II) intel(0): Kernel page flipping support detected, enabling
[ 120.367] (**) intel(0): Display dimensions: (300, 190) mm
[ 120.367] (**) intel(0): DPI set to (121, 120)
[ 120.367] (II) Loading sub module "fb"
[ 120.367] (II) LoadModule: "fb"
[ 120.368] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 120.396] (II) Module fb: vendor="X.Org Foundation"
[ 120.396] compiled for 1.10.1, module version = 1.0.0
[ 120.396] ABI class: X.Org ANSI C Emulation, version 0.4
[ 120.396] (II) Loading sub module "dri2"
[ 120.396] (II) LoadModule: "dri2"
[ 120.396] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 120.396] (II) Module dri2: vendor="X.Org Foundation"
[ 120.397] compiled for 1.10.1, module version = 1.2.0
[ 120.397] ABI class: X.Org Server Extension, version 5.0
[ 120.397] (II) UnloadModule: "vesa"
[ 120.397] (II) Unloading vesa
[ 120.397] (==) Depth 24 pixmap format is 32 bpp
[ 120.397] (II) intel(0): [DRI2] Setup complete
[ 120.397] (II) intel(0): [DRI2] DRI driver: i965
[ 120.397] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[ 120.473] (II) UXA(0): Driver registered support for the following operations:
[ 120.473] (II) solid
[ 120.473] (II) copy
[ 120.473] (II) composite (RENDER acceleration)
[ 120.473] (II) put_image
[ 120.473] (II) get_image
[ 120.473] (==) intel(0): Backing store disabled
[ 120.473] (==) intel(0): Silken mouse enabled
[ 120.484] (II) intel(0): Initializing HW Cursor
[ 120.540] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 120.542] (==) intel(0): DPMS enabled
[ 120.542] (==) intel(0): Intel XvMC decoder enabled
[ 120.542] (II) intel(0): Set up textured video
[ 120.542] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 120.542] (II) intel(0): direct rendering: DRI2 Enabled
[ 120.542] (==) intel(0): hotplug detection: "enabled"
[ 120.542] (--) RandR disabled
[ 120.542] (II) Initializing built-in extension Generic Event Extension
[ 120.542] (II) Initializing built-in extension SHAPE
[ 120.542] (II) Initializing built-in extension MIT-SHM
[ 120.542] (II) Initializing built-in extension XInputExtension
[ 120.542] (II) Initializing built-in extension XTEST
[ 120.542] (II) Initializing built-in extension BIG-REQUESTS
[ 120.542] (II) Initializing built-in extension SYNC
[ 120.542] (II) Initializing built-in extension XKEYBOARD
[ 120.542] (II) Initializing built-in extension XC-MISC
[ 120.542] (II) Initializing built-in extension SECURITY
[ 120.542] (II) Initializing built-in extension XINERAMA
[ 120.542] (II) Initializing built-in extension XFIXES
[ 120.542] (II) Initializing built-in extension RENDER
[ 120.542] (II) Initializing built-in extension RANDR
[ 120.542] (II) Initializing built-in extension COMPOSITE
[ 120.542] (II) Initializing built-in extension DAMAGE
[ 120.707] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 120.707] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 120.707] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 120.707] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 120.707] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 120.707] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 120.707] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 120.708] (II) intel(0): Setting screen physical size to 381 x 238
[ 121.043] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 121.043] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 121.043] (II) LoadModule: "evdev"
[ 121.043] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.049] (II) Module evdev: vendor="X.Org Foundation"
[ 121.049] compiled for 1.10.0, module version = 2.6.0
[ 121.049] Module class: X.Org XInput Driver
[ 121.049] ABI class: X.Org XInput driver, version 12.2
[ 121.049] (II) Using input driver 'evdev' for 'Power Button'
[ 121.049] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.049] (**) Power Button: always reports core events
[ 121.049] (**) Power Button: Device: "/dev/input/event4"
[ 121.063] (--) Power Button: Found keys
[ 121.063] (II) Power Button: Configuring as keyboard
[ 121.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 121.063] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 121.063] (**) Option "xkb_rules" "evdev"
[ 121.063] (**) Option "xkb_model" "evdev"
[ 121.063] (**) Option "xkb_layout" "us"
[ 121.086] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[ 121.086] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 121.086] (II) Using input driver 'evdev' for 'Video Bus'
[ 121.086] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.086] (**) Video Bus: always reports core events
[ 121.086] (**) Video Bus: Device: "/dev/input/event16"
[ 121.100] (--) Video Bus: Found keys
[ 121.100] (II) Video Bus: Configuring as keyboard
[ 121.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16/event16"
[ 121.100] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 121.100] (**) Option "xkb_rules" "evdev"
[ 121.100] (**) Option "xkb_model" "evdev"
[ 121.100] (**) Option "xkb_layout" "us"
[ 121.106] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 121.106] (II) No input driver/identifier specified (ignoring)
[ 121.106] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 121.106] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 121.106] (II) Using input driver 'evdev' for 'Sleep Button'
[ 121.106] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.106] (**) Sleep Button: always reports core events
[ 121.106] (**) Sleep Button: Device: "/dev/input/event3"
[ 121.116] (--) Sleep Button: Found keys
[ 121.116] (II) Sleep Button: Configuring as keyboard
[ 121.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 121.116] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 121.116] (**) Option "xkb_rules" "evdev"
[ 121.116] (**) Option "xkb_model" "evdev"
[ 121.116] (**) Option "xkb_layout" "us"
[ 121.120] (II) config/udev: Adding input device Integrated Camera (/dev/input/event15)
[ 121.120] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 121.120] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 121.120] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.120] (**) Integrated Camera: always reports core events
[ 121.120] (**) Integrated Camera: Device: "/dev/input/event15"
[ 121.146] (--) Integrated Camera: Found keys
[ 121.146] (II) Integrated Camera: Configuring as keyboard
[ 121.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input15/event15"
[ 121.146] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 121.146] (**) Option "xkb_rules" "evdev"
[ 121.146] (**) Option "xkb_model" "evdev"
[ 121.146] (**) Option "xkb_layout" "us"
[ 121.147] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 121.147] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.148] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 121.148] (II) No input driver/identifier specified (ignoring)
[ 121.150] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event12)
[ 121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 121.150] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[ 121.150] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[ 121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event12"
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[ 121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 121.173] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input12/event12"
[ 121.173] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 121.174] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse1)
[ 121.174] (II) No input driver/identifier specified (ignoring)
[ 121.174] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event13)
[ 121.174] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.174] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 121.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.174] (**) USB-compliant keyboard: always reports core events
[ 121.174] (**) USB-compliant keyboard: Device: "/dev/input/event13"
[ 121.193] (--) USB-compliant keyboard: Found keys
[ 121.193] (II) USB-compliant keyboard: Configuring as keyboard
[ 121.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input13/event13"
[ 121.193] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 121.193] (**) Option "xkb_rules" "evdev"
[ 121.193] (**) Option "xkb_model" "evdev"
[ 121.193] (**) Option "xkb_layout" "us"
[ 121.194] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event14)
[ 121.194] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.194] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[ 121.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.194] (**) USB-compliant keyboard: always reports core events
[ 121.194] (**) USB-compliant keyboard: Device: "/dev/input/event14"
[ 121.220] (--) USB-compliant keyboard: Found 1 mouse buttons
[ 121.220] (--) USB-compliant keyboard: Found scroll wheel(s)
[ 121.220] (--) USB-compliant keyboard: Found relative axes
[ 121.220] (--) USB-compliant keyboard: Found x and y relative axes
[ 121.220] (--) USB-compliant keyboard: Found absolute axes
[ 121.220] (--) USB-compliant keyboard: Found keys
[ 121.220] (II) USB-compliant keyboard: Configuring as mouse
[ 121.220] (II) USB-compliant keyboard: Configuring as keyboard
[ 121.220] (II) USB-compliant keyboard: Adding scrollwheel support
[ 121.220] (**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 121.220] (**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 121.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input14/event14"
[ 121.220] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[ 121.220] (**) Option "xkb_rules" "evdev"
[ 121.220] (**) Option "xkb_model" "evdev"
[ 121.220] (**) Option "xkb_layout" "us"
[ 121.220] (II) USB-compliant keyboard: initialized for relative axes.
[ 121.220] (WW) USB-compliant keyboard: ignoring absolute axes.
[ 121.220] (**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 121.220] (**) USB-compliant keyboard: (accel) acceleration profile 0
[ 121.220] (**) USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 121.220] (**) USB-compliant keyboard: (accel) acceleration threshold: 4
[ 121.220] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse2)
[ 121.220] (II) No input driver/identifier specified (ignoring)
[ 121.224] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 121.224] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.224] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 121.224] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.224] (**) AT Translated Set 2 keyboard: always reports core events
[ 121.224] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 121.246] (--) AT Translated Set 2 keyboard: Found keys
[ 121.246] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 121.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 121.246] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 121.246] (**) Option "xkb_rules" "evdev"
[ 121.246] (**) Option "xkb_model" "evdev"
[ 121.246] (**) Option "xkb_layout" "us"
[ 121.247] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 121.247] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 121.247] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 121.247] (II) LoadModule: "synaptics"
[ 121.247] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 121.248] (II) Module synaptics: vendor="X.Org Foundation"
[ 121.248] compiled for 1.10.0, module version = 1.4.0
[ 121.248] Module class: X.Org XInput Driver
[ 121.248] ABI class: X.Org XInput driver, version 12.2
[ 121.248] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 121.248] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 121.248] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 121.248] (**) Option "Device" "/dev/input/event11"
[ 121.373] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
[ 121.373] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
[ 121.373] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 121.373] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 121.373] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[ 121.373] (**) Option "TapButton1" "1"
[ 121.373] (**) Option "TapButton2" "2"
[ 121.373] (**) Option "TapButton3" "3"
[ 121.480] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 121.480] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 121.533] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 121.533] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 121.533] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 121.533] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 121.613] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 121.613] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 121.613] (II) No input driver/identifier specified (ignoring)
[ 121.614] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
[ 121.614] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 121.614] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 121.614] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.614] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 121.614] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event17"
[ 121.640] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 121.640] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 121.640] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 121.640] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 121.640] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 121.640] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 121.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
[ 121.640] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 121.640] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 121.640] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 121.640] (II) No input driver/identifier specified (ignoring)
[ 121.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 121.640] (II) No input driver/identifier specified (ignoring)
[ 121.641] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 121.641] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 121.641] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 121.641] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 121.641] (**) ThinkPad Extra Buttons: always reports core events
[ 121.641] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 121.666] (--) ThinkPad Extra Buttons: Found keys
[ 121.666] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 121.666] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 121.666] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 121.666] (**) Option "xkb_rules" "evdev"
[ 121.666] (**) Option "xkb_model" "evdev"
[ 121.666] (**) Option "xkb_layout" "us"
[ 122.391] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 122.391] (II) intel(0): Printing DDC gathered Modelines:
[ 122.391] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 122.391] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 122.411] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 122.411] (II) intel(0): Printing DDC gathered Modelines:
[ 122.411] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 122.411] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 336.811] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 336.811] (II) intel(0): Printing DDC gathered Modelines:
[ 336.811] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 336.811] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 336.835] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 336.835] (II) intel(0): Printing DDC gathered Modelines:
[ 336.835] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 336.835] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 343.607] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 343.607] (II) intel(0): Printing DDC gathered Modelines:
[ 343.607] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 343.607] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 343.672] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 343.673] (II) intel(0): Printing DDC gathered Modelines:
[ 343.673] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 343.673] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 343.735] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 343.735] (II) intel(0): Printing DDC gathered Modelines:
[ 343.736] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 343.736] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 344.801] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 344.801] (II) intel(0): Printing DDC gathered Modelines:
[ 344.801] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 344.801] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 344.867] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 344.867] (II) intel(0): Printing DDC gathered Modelines:
[ 344.867] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 344.867] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.559] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.559] (II) intel(0): Printing DDC gathered Modelines:
[ 362.559] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.559] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.624] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.624] (II) intel(0): Printing DDC gathered Modelines:
[ 362.624] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.624] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.692] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.692] (II) intel(0): Printing DDC gathered Modelines:
[ 362.692] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.692] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.756] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 362.774] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.774] (II) intel(0): Printing DDC gathered Modelines:
[ 362.774] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.774] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 362.847] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 362.847] (II) intel(0): Printing DDC gathered Modelines:
[ 362.847] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 362.847] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 525.745] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 525.745] (II) intel(0): Printing DDC gathered Modelines:
[ 525.745] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 525.745] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 530.202] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 530.202] (II) intel(0): Printing DDC gathered Modelines:
[ 530.202] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 530.202] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 536.835] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 536.835] (II) intel(0): Printing DDC gathered Modelines:
[ 536.835] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 536.835] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 539.995] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 539.995] (II) intel(0): Printing DDC gathered Modelines:
[ 539.995] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 539.995] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 540.067] (II) intel(0): Allocated new frame buffer 3136x1050 stride 12800, tiled
[ 540.116] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 540.116] (II) intel(0): Printing DDC gathered Modelines:
[ 540.116] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 540.116] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 540.199] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 540.199] (II) intel(0): Printing DDC gathered Modelines:
[ 540.199] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 540.199] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 551.649] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 551.649] (II) intel(0): Printing DDC gathered Modelines:
[ 551.649] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 551.649] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 551.717] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 551.717] (II) intel(0): Printing DDC gathered Modelines:
[ 551.717] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 551.717] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 551.786] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 551.786] (II) intel(0): Printing DDC gathered Modelines:
[ 551.786] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 551.786] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1499.858] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1499.858] (II) intel(0): Printing DDC gathered Modelines:
[ 1499.858] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1499.859] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.345] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.345] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.345] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.345] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.411] (II) intel(0): Allocated new frame buffer 3200x1050 stride 12800, tiled
[ 1506.470] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.470] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.470] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.470] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.547] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.547] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.547] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.547] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.608] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.608] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.608] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.608] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1506.672] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1506.672] (II) intel(0): Printing DDC gathered Modelines:
[ 1506.672] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1506.672] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.035] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.036] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.036] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.036] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.107] (II) intel(0): Allocated new frame buffer 3392x1050 stride 13824, tiled
[ 1512.187] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.187] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.187] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.187] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.266] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.266] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.266] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.266] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.323] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.323] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.323] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.323] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
[ 1512.391] (II) intel(0): EDID vendor "LEN", prod id 16435
[ 1512.391] (II) intel(0): Printing DDC gathered Modelines:
[ 1512.391] (II) intel(0): Modeline "1440x900"x0.0 100.00 1440 1488 1520 1800 900 903 907 922 -hsync -vsync (55.6 kHz)
[ 1512.391] (II) intel(0): Modeline "1440x900"x0.0 81.95 1440 1488 1520 1768 900 903 909 926 -hsync -vsync (46.4 kHz)
- i don't use 10-monitor.conf
- tried used disper
disper -e -r 1440x900,1680x1050 -t top
but that didn't work either
any suggestions are welcomed...thanks for responses
@BurntSushi
here is what scrot gave me: http://dl.dropbox.com/u/292474/arch/output.jpg
but what i see is more like: http://dl.dropbox.com/u/292474/arch/output_view.jpg
@ewaller
interface is VGA. i have tried changing the H. Position on the monitor to "slide it back" but even when it's completely at 100% on one side i gain back half of the black area. i don't know what else i can change on the monitor that would help me out. -
Monitoring thread exceeds the limit
Hi all,
I followed the sap note for Admin task of PI.
In sap note :
Start the Visual Administrator of your J2EE Engine and navigate to Server -> services -> monitoring. On the
right side navigate first to Kernel -> Application Threads Pool and then to Kernel -> System Threads Pool
Check if the ThreadPoolCapacityRate is below 100% for both, the application threads and the
system threads. Also check the maximum value in the lower part of the window and the history.
But in my case it exceeds the limit.(i.e is 150) So my question is that.
1.What is the impact if thread get increased?
2.How can i control the thread within the limit?
Please suggest for the same.
Regards
VijayHi all,
I followed the sap note for Admin task of PI.
In sap note :
Start the Visual Administrator of your J2EE Engine and navigate to Server -> services -> monitoring. On the
right side navigate first to Kernel -> Application Threads Pool and then to Kernel -> System Threads Pool
Check if the ThreadPoolCapacityRate is below 100% for both, the application threads and the
system threads. Also check the maximum value in the lower part of the window and the history.
But in my case it exceeds the limit.(i.e is 150) So my question is that.
1.What is the impact if thread get increased?
2.How can i control the thread within the limit?
Please suggest for the same.
Regards
Vijay -
I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders app for the COMPUTER that is more user friendly?
sgreenie,
If you are willing to wait, Apple - OS X Mountain Lion - Inspired by iPad. Made for the Mac explains that a "Reminders" application will be included in the next release of OS X. -
Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
You can also send my answer to [email protected]
Thanks in advance for all who will help.
slovebkrefer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
http://support.apple.com/kb/HT1380
Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
Have a nice day! -
Installed snow leopard and the right click on my mouse no longer works. Any ideas?
I just replaced my hard drive and installed a clean copy snow leopard with all updates. The right mouse button (normal wired mouse that came with imac) with the menu drop down is no longer working. changed secondary button in mouse settings and got the right click menu but now when I right click the file or group of files are no longer highlighted. this *****. any ideas?? Between the hassle of replacing a hard drive, mouse problems, firefox, opera, office mac and elgato tv problems and issues im fed up.
Message was edited by: tele59Apple menu -> System preferences -> Keyboard and Mouse should give you controls over the mouse. If not, either Steer Mouse or USB Overdrive might give you better control.
-
My monitor looks 90 degrees to the right
My monitor looks 90 degrees to the right.
How can I fix this?Sorry, but could you extend your description with some more details like which monitor of which machine and which operating system. Perhaps it would be useful when you post the graphics card manufacturer and what you did because your description definetively tells nothing really about your problem.
Please more details. OK?
Greets -
We purchased an Acrobat 9 Professional and no longer have the installation media. Where we can download the right software according with the license we have? We want to install it on Windows 7 64 bits
http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Be sure to make a backup of this download to a CD or backup HD for the future. You will still need your S/N.
-
'''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''
If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
How can I reduce the size of the Firefox monitor display?
I use my monitor in portrait mode, and the right side of the Firefox window is not displayed.Try using this extension. <br />
https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/ -
Button appears in the right lower corner to the left of the scrollbar when scrolling down long-ish webpages. I find it tremendously annoying as it covers the information underneath and when I hit it accidentally it obviously makes the whole webpage jump back to the top. Any idea how I can get rid of it ? Thanks heaps for your help !
ok, glad that the issue could be cleared up this way...
you could use adblock plus to hide those elements on ebay though. therefore you'd have to go into the adblock filter settings & add the following filters to your custom element hiding rules:
ebay.com#a(id=gh-bt)
ebay.com#b(class=bk2top) -
Since I upgraded to Firefox version 3.6.10, clicking on the downward arrow at the right end of the location bar no longer displays the drop-down list of sites visited, bookmarks and addresses typed in location bar. My Tools > Options > privacy setting is to save history, and if I start typing a previously accessed website's address in the location bar, then the full address appears as a drop-down item. But not when I just click at the right end of the bar.
You can try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Maybe you are looking for
-
I am having issues with my mac book pro backing up
It is taking days. I have 5200 photos on it and a few problems so the mac guys said to back it up so they can do a few things to it but nothing major. Why is it taking SO long to back up? It's at 7.45 GB and will be complete at 41 GB.
-
How do i access multiple accounts on one computer
I have several apple devices in my home and i can't seem to see the different purchases when i plug in the different devices. I have itunes installed on my computer, do i have to sign in each time with the apple id of each user to see their purchase
-
Microsoft DPM 2010 no longer works for WSS 3.0 SP3 farm since moving farm to new SQL cluster
Hi, I've had Microsoft DPM (first 2007, then 2010) backing up my WSS 3.0 SP3 farm since 2009. This weekend, I had to migrate the WSS farm to a new SQL 2008 SP1 cluster. I am using a SQL alias after the move. I mean, I set the alias up several week
-
How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive. Once it started, i
-
Hi experts i am printing invoice 91256789 for different output type (Z1B1 and Z1C1) Invoice quantity value is 34,000 for Z1B1 output type quantity display like 34.000 for Z1C1 output type quantity display like 34,000 anybody Know, what's wrong in Z