TV@nywhere Driver Problem...PLEASE HELP!

I just reformatted and put SP1 on XP and reinstalled all the drivers from the MSI Site. Everything installed correctly except when one thing, nVidia WDM video capture (universal). Under device manager there is an exclamation point there and its properties say: This device cannot start. (Code 10). I click on "update drivers" and point to where I unpacked the nvidia wdm drivers, but it still doesn't work. No matter what program I try, i cannot get it to find any channels. What can I do? This worked fine on my previous install of XP without SP1.
kris

Ok if the WDM video capture have nothing to do with my TV @nywhere, then does anyone have any idea what my problem is? With just XP the card worked beautifully and picked up all channels. Now it scans and picks up nothing. I have tried every program out there to no avail: powerVCR II, showshifter, virtual vcr, WinDVR, etc...the only program I HAVE NOT tried is MSIPVS b/c I don't have my cd case with me and therefore the serial #. But regardless, no other program will pick up channels, I only get blue. Should I check IRQ's or perhaps move PCI slots? Or is it something else? Thanks guys.
k

Similar Messages

Macbook Pro Hard Drive Problem - Please Help

My macbook pro had a hard drive failure so I went out and bought a new hard drive and got it to work with the Mac OS, although 2 days later it crashed and now it is not being found when I use the disk utility (Cmd-R), I even ran a hardware test and showed no trouble found.
Should I return this hard drive and get another?
Or is there another problem that is occuring?
I have a Macbook Pro (mid 2012)
Thank You.

I just installed a new ribbon cable for the hard drive...Now I get a new error that is popping a message saying "2003-f", this happens when I try to go to the online recovery (CMD-R). I tried two different hard drives and still won't let me get to the utility.
Someone please help, my mini semester classes have started for my University, and I am stuck with no laptop.
Thank You.

G4 Powerbook Hard Drive Problem - PLEASE HELP!!

I have a powerbook G4 15 inch alu. It is running OSX version 10.4.11
My system profiler tells me I have a 74.5GB hard drive with 69.34GB used, but I had wiped the HD in September 2008 and reinstalled the OS and few other programmes and files, so this shouldn't be the case at all.
I have found that my the problem is with my Users folder - within Users, my user account (the main account, I have another account setup so my mum can use her iPhone) has 67GB used. But when I go into my user account (clicking through the icons, after double-clicking the MacintoshHD desktop icon), none of the folders within my account run to anwhere near 67GB. Totalled, they come to around 10-15GB at most. There's a good 50GB or so of hard drive that just seems to be missing.
I ran Drive Genius to repair permissions and that eliminated a couple of GB of this 'missing space' but no more than that. How can I go about finding and reaccessing my lost hard drive space?
FWIW - I reinstalled the OS in September because this was my University laptop and the result of 4-5 years use had resulted in loads of unwanted files. I saved the important stuff to discs and then reinstalled because it was much easier (I thought) than trying to find and get rid of all the unwanted stuff.
Please please help. At the moment, the computer is running fine if a little sluggishly (understandable given how much of the hard drive is 'used'), but I had a nasty experience earlier this year with my G5's hard drive crapping ut and really don't want to end up in the same boat with this one. I also need that extra space back so I can use some programmes I can't install or work with as things stand.
Many thanks for taking the time to read this and respond, I don't know enough about computers to have any clue as to how to proceed, so your help in this matter would be greatly appreciated.

eww - will do and report back.
cornelius - apologies for the ambiguity there. Hope this clears things up a bit:
Users folder = get info says 69.34GB used
Double-click on the Users folder and I get three folders - the shared folder, my mum's account folder, and my account folder. My account is the main/master account.
The shared folder is empty. My mum's account folder has a couple GB used, mine has 66.5GB used.
I double-click on my account folder, and get icons/folders for Desktop, Library, Movies, etc (the usual stuff). When I do Get Info for each of these, the sum of GB used by them is about 10-15GB, nowhere near the 66GB supposedly used.
If it helps any, the File System is Journalled HFS+
S.M.A.R.T. status is verified, and Drive Genius, Disk Warrior, and Disk Utility aren't picking up anything bad other than the corrupted permissions I repaired prior to making this post. Repairing permissions only freed up a few GB more space, still got 50 missing GB to locate and free up. Or start saving for a replacement HD, but if this is a sign of a crash, I'd rather know now so I can plan for that.
Many thanks to both of you for responding so quickly - hopefully this problem is solvable.
It doesn't make sense, there's nothing else which could have used those 'missing' GB. And, as I only reinstalled everything in September I know there's no way the few programmes I've added and 10 or so CDs I've copied onto the G4 could account for the missing 50GB. My HD should have most of its space free - minus the space used by OSX, any OSX updates, and literally a handful of small apps and files.

Powerbook G4 12" 867mhz with dvd/cd drive problems - please help!

Hello all,
Just realized this thread should have been in this section. I put it in the using your powerbook section. Sorry for the double post. I just wanted it to be in the right section.
I have just inherited a powerbook g4 from a family member who is upgrading to a new machine. It has dvd/cd drive problems. I'm totally new to OSX and a notebook machine and need some assistance. I've been briefly scanning the forums here and noticed problems with these drives on the model computer. Is there a way to fix this with an install of older software? Here is the problem, if I insert a cd into the super drive it mounts on the desktop, and itunes will play it but it skips and sounds very distorted. I haven't tried a dvd but was told it doesn't even see the dvds on the desktop. Here are the know specs on the machine:
867mhz
640 mb ram
mac os x 10.5.1
boot rom version 4.5.5f4
the burner info: matshita dvd r uj-015
firmware version: docb
Thanks in advance!

Good Morning Mac,
According to your posted specs for the 12" G4PB you have the bare minimum requirements for Leopard. Even Tiger (10.4.11) should have 1GB RAM for decent performance (see my signature specs).
An easily installed 1GB RAM stick can be obtained at either of these reliable vendors:
http://eshop.macsales.com/ or http://www.crucial.com/
However, we are getting ahead of ourselves. Try the following in this order:
Repair Disk Permissions with /Applications/Utilities/Disk Utility/Repair DP, then do the following:
Run Repair HD from original CD or DVD install disk ........
Insert disk and re-start holding down the 'C' key until you see the spinning gear.
At Installer level...... DO NOT CONTINUE
At top left, use 'Utilities' Menu for Tiger or later and go 'Disk Utility'
Select your HD volume with Operating system on...
Select First Aid tab then select Repair Hard Disk button
If "RED" errors are repaired, run again, until none are reported then +run again+ just to be sure you are OK
Do NOT continue with the Installer... QUIT the Installer and return to the Finder ......... Eject the Disc
RESTART ..... Repair Disk Permissions .... AGAIN!
Try the above stuff first .... if that doesn't help, we will get into the "RESETS" steps next!
DIXIE

Acomdata Hard Drive Problem - Please help!!

I purchased an Acomdata HydridDrive 250GB USB 2.0 drive today for my MacBook. When plugging it in, it shows up on the desktop like a CD and you are supposed to install "SecureHD_Login_V126.pkg" . So I run it and everything goes as normal... it selects my MacBook's HD, asks for my password, warns me the installation will require a reboot... then it says "There were errors installing the software" and "Please try installing again". Well, I've tried several times with no success. According to instructions, I have to install this before I can mount the drive because it has password protection or something. There are no forums or any useful help on Acomdata's website. Anyone know what's wrong?

monkey paw,
That's correct. I use the built-in "rsync" command line utility to create and maintain backups. It's a very powerful tool, if a bit less than user-friendly. Best of all, a command line incorporating it can be used in an Automator Action, which can then be double-clicked to run the backup whenever the external drive is connected.
If any of this sounds interesting, open Terminal, then type:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">man rsync</pre>
and press <RETURN>. You will then have displayed the rsync "manual pages." Use the arrow keys to scroll up and down, or use the spacebar to go page by page.
Once you become totally lost in these man pages, come back here for specific help on using it, if you like
Scott

X40 2382-ECU Hard drive problem - please help!

I have a X40 2382-ECU thinkpad. I ran PC-doctor program and found the S.M.A.R.T. status test and short self-test both failed while the rest of the rest of the tests passed. After that, I ran a "chkdsk" comment from window and found no error. I was just wondering what does the result from PC-doctor means. Does that mean I have to replace my HD? Is there any other way to fix it without getting a new HD? If I have to replace HD, which HD will be capatible with my system (I'd like to upgrade the HD if possible - it only has 40gb now). Thanks!

Welcome to the forum!
I'm afraid that no good news will come from me this time around: the fact that your HDD has failed PC-Doctor tests suggests that it's on its way out. If I were you I'd clone the drive (or backup all the important stuff at least) yesterday.
Your X40 uses a 1.8"/4200rpm Hitachi drive, which are no longer in production. The biggest size available was 60GB, and these change hands at about $125-150 for an unused drive in the original unopened packaging, and that's on eBay...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Hp 87130 switch driver problem PLEASE HELP

i was writing the sending a typical instruction route:driven:all;
straight into a the switch driver and it gives me an error "undefined header."
i know i have the right gpib address because i was able to turn off the led by
using the *cls and *rst commands. but i took that instruction straight off of
the manual for the 87130 and it still doesn't work.
Posted from [207.110.6.67]
via Mailgate.ORG Server - http://www.Mailgate.ORG

Hello-
It sounds like the interface is working, but the instrument is not responding. It may help to contact Agilent about this instrument. My initial guess is that there could be a couple of causes:
-The instrument needs to be configured to receive GPIB commands.
-The semi-colon is not a valid end-of-string (EOS) character.
Randy Solomonson
Application Engineer
National Instruments

External hard drive problem, please help!

I have a SEAGATE external hard drive which I had associated with Time machine so its file system was HFS+ journaled.
when i turn the hdd on a window pop up comes on the screen telling me to either initialize, ignore or eject.
if i go to disk utility the hard disk shows as disk1s2 and that its format is FAT32.
trying to repairing it/fixing through Disk utility gives me the following error
Verifying volume “disk1s2”
** /dev/disk1s2
Invalid BS_jmpBoot in boot block: 000000
Error: Filesystem verify or repair failed.
however if i go to terminal and type fsck -f -y /dev/disk1s2
after a few fixes the following output was given
Andrew:~ Andrew$ fsck_hfs -f -d -y /dev/disk1s2
** /dev/rdisk1s2
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Journal replayed successfully or journal was empty
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking multi-linked directories.
privdir_valence=13289, calc_dirlinks=35218, calc_dirinode=13289
** Checking volume bitmap.
** Checking volume information.
** The volume Everything appears to be OK.
so here it recognises its name and everything.
what's wrong?
Thanks!

amarkitanis wrote:
when i turn the hdd on a window pop up comes on the screen telling me to either initialize, ignore or eject.
If you don't have any data on the drive, you may want to initialize the disk. Otherwise I would check out DiskWarrior.
Cole

Windows 8 driver problems, please help

hello,
i was trying to clone my windows partition the other day with winclone 2.2 to expand it, but that didn't end well, i had a perfectly working windows 7.
so, when i lost my bootcamp partition, i decided to give windows 8 (customer preview) a try.
Unfortunately, the bootcamp drivers only work in windows 7 (even if u run them in windows 7 compatibility).
i tried to install the drivers one by one manually, some have worked, and others have not.
Working:
Wireless reciever
keyboard
trackpad (was, because i deleted the drivers and reinstalled them, so i lost this driver that was built in)
graphics card
Not Working:
trackpad (was, because i deleted the drivers and reinstalled them, so i lost this driver that was built in)
media keys (brightness, keyboard illumination, pause play rewind FF, volume keys and eject)
ambient light sensor
multi touch gestures for trackpad.
can anyone give me a way to get the drivers to work?
MacBook Pro 15'' 2.0 GHz Snow Leopard 10.6.8 early 2011 model

nooo I did not say or suggest they they will work, or easy or with OEM DVD.
But if you are going to use 8 go ahead but plan to redo (unlikely to be an upgrade install).
You still have to look around and see what others have managed to do with some not working drivers.

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
I don't know.. I need clarification and help, PLEASE.
Thank you very much in advance!

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

990fxa gd80 raid 0 problem please help me i am begging you

so i will start with my set up
990fxa dg80 mb
fx 8350 cpu
780ti
8 gig of ram
256 hdd
2x samsung 850 evo
750 hybrid drive
So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for help

I..have a few questions...
1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
3. Is your Win7 64 bit or 32 bit?
4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
And make sure you get the driver from here:
http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64

Urgent Problem please Help(hayat)

Hello Hi,
I want to Install Form 6.0 With Oracle 8i on Server
mean not personal oracle,
if i install first oracle 8i and then form 6.0 then
they overwrite their homes and vice versa.
What method i use to control this problem.
please help me so that i install form 6.0 on oracle 8i server.
thanks
hayat

Ok, I have read the sun site and downloaded the JDK and saved it to disk in the C:\ drive.
However I still get the same error so I think I must be very stupid and I think the computer knows that.

I cannot install, only hard drive test. please help!

hi,
my iBook G4 crashed about 2 months ago and I got a new harddrive but it came with no operating system. I borrowed a friend's disks but everytime I put in disk 1 it will only go to Hard Drive Test and I cannot make it go to a section where I can actually reinstall. I have tried pressing command, c, command and c, and nothing. every time it goes to the Hard Drive Test and I have already run it and I passed.
the girl with the disks also has an iBook G4 and I do not understand what the problem is. she just bought it after I did.
I bought my laptop in the US but I am currently in Denmark and could not get Apple to actually fix my laptop but there should be no problem.
please help!

heychristaay,
As I asked in My Previous Reply;
"What OS was installed on your iBook before you replaced the HD?
Have you tried installing, using either the disks that shipped with the iBook, or a Full Retail Version of an OS, that you may have upgraded to? Your own disks?'
If the borrowed disks, do not look Exactly like THESE, they will not work to install Panther 10.3.x.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
ali b

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

TV@nywhere Driver Problem...PLEASE HELP!

Similar Messages

Maybe you are looking for