TV@nywhere FM/TV Capture - Auto Startup?

Hi. I'd like to learn how to set up this card (TV@nywhere Plus) and its software up to enable it to load/startup automatically at a predsignated date and time and on a predesignated tv or fm station for a weekly capturing event. This will most likely be when the computer is already on, but with the tuner most likely off. Is it possible to do this with this tuner card's software?
Thanks
Wayne

I use it in 768x576 without any problems
you just have to look for a Use Smart Tee Filter setting because the card can`t both capture and preview over 288 so you`ll need to split the data on the Capture pin in order to provide preview over 288 lines.

Similar Messages

How to turn off XLReporter auto startup in SBO 2007

Dear Experts,
Is there any way to turn off XLReporter auto startup in SBO2007?
Much Thanks in Advance!
Warmest Regards,
Chinho

Hi,
There is no default way to stop the XL reporter in 2007 as its integrated.
You can use authorization to restrict access to XL reporter tools,If this doesnt satisfy requirement raise a ticket to sap support.

VPN auto startup after power cut

Good evening
I have set my server to auto start after a power outage. What I would like is have the vpn startup. So the server is auto logging in as a certain user, and then the user has a auto startup item. The server Admin.
The issue is that the server admin needs to you to bring the window to the foreground in order for the vpn to startup.
Is there another way to do this?

Does it power back on after a power outage? auto-boot only covers the boot after the server powers on or is reset. I don't see an option in OpenBoot for auto power on after a power interruption.

Auto-startup EM for Solaris 10

Hi all,
I'd like to put the Enterprise Manager to auto-startup when rebooting the server.
The database version are 10g and 11g, and the OS is Solaris 10.
Basically the manual command is: emctl start dbconsole
I'd like to setup automatically to execute the same command.
Thanks in advance everybody.
Alex

Hi,
I checked the Note 222813.1 you mentioned, but it says about to restart the database, also it's already done this setup, but it's not included the Enterprise Manager.
Furthermore, I checked the oratab and its fine.
Any other clue to proceed on that?
Thanks.
Alex

How to let database(10.2) auto startup when linux reboot?

Hi all,
I installed oracle database 10.2 in linux (x86),and created a database.
I can startup the database manually. But database can not be started up automatic when linux starts up.
How to let database startup automatic when OS starts up?
the details shell scripts for auto startup would be appreciated!
Thanks

I don't know LINUX but I know Solaris. In Solaris, you have a startup and shutdown script in $ORACLE_HOME/bin. Setting the field to Y in oratab means you startup/shutdown the instance when executing the scripts. However, it does not mean the startup script will be
executed upon reboot. In solaris, we place a script in /etc/rc3.d. Then the script will be executed upon reboot. Guess you have similar features in Linux.

Database auto-startup script

Hi Team,
How can I check whether the auto startup script is scheduled for the database after the server reboot
OS version:Linux server1 2.6.18-194.11.1.el5 #1 SMP Tue Jul 24 05:45:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
DB version :11.2.0.2
/etc/oratab entry is set to Y.
But the database did not startup after the server reboot. How to verify that the auto startup script is available?

http://www.oracle-base.com/articles/linux/automating-database-startup-and-shutdown-on-linux.php
HTH
Anand

Can any tag in app.xml control no-auto-startup after completing install?

InstallFolder in app.xml can work. And can any tag in app.xml controls no-auto-startup after completing install?

No, there isn't any tag to control no-auto-startup.
you will have to Uncheck the option "start application after installation" in the installation dilaog itself.

Disable auto startup on opening the lid

Apparently there is non possibility to disable the auto startup on opening the lid for the Aspire R13 (and maybe other devices): http://community.acer.com/t5/Notebooks-Netbooks/Aspire-R13-r7-371t-automatic-startup-with-display-lid/m-p/350609/highlight/false#M58486 It would be really useful to add this possibility.

Thanks for the feedback, atagliaf. I read the thread that was also posted on the Community Forum.
I understand what you are asking for, but I would like to get a bit more info, if you don't mind, before I raise the issue to the design team.
So, your laptop has been put to sleep by closing the lid. And you KNOW that opening the lid will wake it up. But for some reason you want to open the lid and NOT wake it up. I'm not trying to be argumentative here at all, but I don't understand why this causes an issue. It SEEMS to me like this feature was put in as a convenience, and while it may take a little time to get used to this behavior, I'm not understanding how this is a problem. Please clarify for me, if you would. Thanks again.

(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7

제품 : ORACLE SERVER
작성날짜 : 2003-06-02
(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7
====================================================================
PURPOSE
이 자료는 O/S startup 시에 Oracle RDBMS 서비스를 자동으로 startup하
는 방법에 대한 자료이다.
Explanation
sun solaris 부팅 시 oracle DB를 auto startup하도록 하는 데 관련된 화일들이다.
/etc/inittab : o/s의 초기화 과정을 조절하는 화일
/etc/rc2 : 부팅 run-level 2 에서 사용되는 스크립트
/etc/rc0 : 부팅 run-level 0 에서 사용되는 스크립트
/etc/rc2.d/S99dbstart : /etc/init.d/dbstart 에 대한 symbolic link
/etc/rc0.d/K01dbshut : /etc/init.d/dbshut 에 대한 symbolic link
/var/opt/oracle/oratab : 시스템에 설치된 오라클 인스턴스에 대한 정보.
(참고)
/etc/init.d/dbstart, dbshut 화일은 super user(root)로 생성하시고,
symbolic link도 super user로 만드시기 바랍니다.
이 화일들은 super user가 owner가 되도록 하고, super user(root)만이
실행 가능하도록 해야 합니다.
1. 먼저 vi /etc/inittab 화일을 열어보십시오.
ap::sysinit:/sbin/autopush -f /etc/iu.ap
fs::sysinit:/sbin/rcS >/dev/console 2>&1 </dev/console
is:3:initdefault:
p3:s1234:powerfail:/usr/sbin/shutdown -y -i5 -g0 >/dev/console 2>&1
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
s1:1:wait:/usr/sbin/shutdown -y -iS -g0 >/dev/console 2>&1 </dev/console
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
s3:3:wait:/sbin/rc3 >/dev/console 2>&1 </dev/console
s5:5:wait:/sbin/rc5 >/dev/console 2>&1 </dev/console
s6:6:wait:/sbin/rc6 >/dev/console 2>&1 </dev/console
fw:0:wait:/sbin/uadmin 2 0 >/dev/console 2>&1 </dev/console
of:5:wait:/sbin/uadmin 2 6 >/dev/console 2>&1 </dev/console
rb:6:wait:/sbin/uadmin 2 1 >/dev/console 2>&1 </dev/console
sc:234:respawn:/usr/lib/saf/sac -t 300
co:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` console login: " -T
sun
-d /dev/console -l console -m ldterm,ttcompat
s1부터 s6까지 os file들에 대해 위와 같이 device redirection이 연결되어
있으면 됩니다.
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
위와 같이 설정하면 run-level 2일 경우 /sbin/rc2 스크립트가 실행된다.
/sbin/rc2 는 /etc/rc2.d 디렉토리에 들어있는 스크립트를 실행한다.
만약 스크립트가 S 로 시작하면 /sbin/rc2 는 이 스크립트에 startup 파라미
터를 부여하고 여기서 지정된 프로세스를 실행시킨다.
따라서 /etc/rc2.d/S99dbstart 화일을 사용하여 dbstart를 실행한다.
shutdown 과정도 거의 비슷하다. /etc/inittab 에 다음과 같은 라인을 보자.
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
이것은 /sbin/rc0 를 실행시키는데 /sbin/rc0 는 /etc/rc0.d 디렉토리에
들어있는 스크립트를 실행시킨다.
스크립트 이름이 K 로 시작하면 이것은 stop 파라미터를 갖고 실행되어서 이
스크립트에 지정된 프로세스를 정지시킨다.
따라서 /etc/rc0.d/K01dbshut 스크립트는 stop 파라미터를 갖고 실행되며
이 스크립트는 $ORACLE_HOME/bin/dbshut 스크립트를 실행시켜서 오라클을
shutdown 시킨다.
2. 그 다음에 vi /etc/rc2 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 2에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
set `/usr/bin/who -r`
if [ x$9 = "xS" -o x$9 = "x1" ]
then
echo 'The system is coming up. Please wait.'
BOOT=yes
3. 그 다음에 vi /etc/rc0 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 0에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
echo 'The system is coming down. Please wait.'
# make sure /usr is mounted before proceeding since init scripts
# and this shell depend on things on /usr file system
/sbin/mount /usr > /dev/null 2>&1
# The following segment is for historical purposes.
# There should be nothing in /etc/shutdown.d.
if [ -d /etc/shutdown.d ]
then
for f in /etc/shutdown.d/*
if [ -s $f ]
then
/sbin/sh ${f}
fi
fi
4. /etc/init.d/dbstart 와 /etc/init.d/dbshut 스크립트를 만들어야 합니다.
그 내용은 각각 다음과 같이 한 줄로 작성합니다.
/etc/init.d/dbstart 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
/etc/init.d/dbshut 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
5. /etc/rc2.d/S99dbstart 화일을 /etc/init.d/dbstart에 대한 link로 생성합니다.
ln -s /etc/init.d/dbstart /etc/rc2.d/S99dbstart
6. /etc/rc0.d/K01dbshut 화일을 /etc/init.d/dbshut에 대한 link로 생성합니다.
ln -s /etc/init.d/dbshut /etc/rc0.d/K01dbshut
7. /var/opt/oracle/oratab 화일을 엽니다.
oratab 화일은 일반 텍스트 화일로서 시스템에 설치된 오라클 인스턴스에 대한
정보를 가지고 있는데 보통 3개의 필드로 이루어져 있으며,
첫번재 필드는 ORACLE_SID, 두번째 필드는 ORACLE_HOME, 세번째 필드는 Y 또는
N으로 구성되어 있습니다. 해당 인스턴스를 auto startup 시키려면 세번째
필드가 반드시 Y로 세팅되어 있어야 합니다.
아래에 예를 참조하세요.
ORA805:/oracle4/ora8/app/oracle/product/8.0.5:Y
ORA815:/oracle4/ora8i/app/oracle/product/8.1.5:Y
(주)
만약, <$ORACLE_HOME>/bin/dbstart 수행에 오류가 있으면 기존의 dbstart 화
일을 다른 path에 rename하고, 아래 내용만 가지고 <$ORACLE_HOME>/bin/ 아래
에 dbstart 화일을 다음과 같이 만든다.
svrmgrl <<EOF
connect internal
startup
exit
EOF
Example
none
Reference Documents
none

Hi Frank,
This is a bug in 9.0.1. It is fixed in 9.2 and
backported to 9.0.1.2 (rdbms 9.0.1.2 patch). Note that you
need to specify the sdo_indx_dims=2 in the parameter clause.
As a workaround in 9.0.1.0 you could do:
(1) remove the z coordinate (as you mentioned),
(2) set the srid to null (instead of 8307) both in
the geometries as well as the index metadata,
(3) set geodetic=false in the create-index parameters.
Hope that helps,
Ravi.

Tv@nywhere Master - Cant capture higher than 352X288

Hi
I have a Tv@nywhere Master and i cant capture any higher that 352x288 resolution.
I tryed VirtualDub and Adobe Premier . They both say : Unsuported Video Format when i try to select 640x480 or 720x576 . (PAL mode)
The original software (MSIPVS) lets me choose the format and resolution but i dont want to use it because it offers poor quality.
I am capturing from VHS at maximum quality possible and storing it in AVI uncompressed and then use TMPEGenc to SVCD.
Can anyone comment on this ?
Doesnt this board capture higher than 352x288 ???
Thank you
Filipe

I use it in 768x576 without any problems
you just have to look for a Use Smart Tee Filter setting because the card can`t both capture and preview over 288 so you`ll need to split the data on the Capture pin in order to provide preview over 288 lines.

Auto startup of programs

My imac os10.5 auto loads microsoft word when logging on. I am using parental controls and have gone on to the administrator and made sure there are no startup programs listed. But when I log on to student it starts up Word. How can I turn this off? Help

Richard,
Quick way would be to log into the user in question, ctrl click on Word and select "Open at Login" make sure that its not checked. If that doesn't work open System Preferences -> Accounts -> Select Account in Question -> Login Items (tab), remove Word.
Hope that helps,
Weston

Capture auto generating seqs

Hi,
Is there a way with FCP to auto create sequences during DV capture based on the timestamp of the clips on the tape? I mean one sequence per take.
Thanks,
fred.
Mac OS X (10.4.3)

If your timecode is as it should be, there will be no breaks.
I should have mentioned - If you are shooting HDV and capturing in FCP5, you have the option of either capturing continuous clips or having FCP break them into discrete shots. This is due to the highly problematic nature of the 15 frame GOP format of HDV.
have fun.
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

Prevent Mail auto startup

How do I prevent "Mail", the Maverick system's email program, from auto opening, as soon as I get Mavericks up and running? I can't find anything relating to it in the system's startup menu.
Been like it ever since I first upgraded my mini to run Mavericks. And I've not implemented anything to make it do this. I'm worried that the same thing will happen when I upgrade my MacBook to Mavericks, too.
Cheers,
Wireoffcut.

Maybe this is what you mean by "the system's startup menu" but I thought I'd give this a shot. It's the setting in the System Preferences > Users & Groups window.

Auto startup script in 10g rel2

According to the Grid Control release 2 documentation, the out-of-the-box installation is supposed to configure and startup the database, OMS, listener and agent automatically when the server reboots. This is not the case when I reboot my server (RHEL 3 and 4). None of the processes were started automatically. I do not see any entries in rc*.d either. Where are these scripts located?
Installation type - Enterprise Manager Using new database
Anyone experience similar issue? Are there any further configurations that I may have missed?
thanks.

Mine are in /etc/rc.d/init.d/gcstartup.
Basically a bunch of shell calls like:
if [ -f /opt/app/oracle/product/agent10g/install/unix/scripts/agentstup ]; the
n
. /opt/app/oracle/product/agent10g/install/unix/scripts/agentstup
fi
if [ -f /opt/app/oracle/product/agent10g/install/unix/scripts/agentstup ]; the
n
. /opt/app/oracle/product/agent10g/install/unix/scripts/agentstup

WLSE 2.11 AUTO STARTUP CONFIG

Hello, can anyone help, we have a problem with our startup configuration templates. When we create a new one it quite often apples a different configuration template, often one above or below the requested one. As such we have the wrong templates being applied to AP's. We also have a template that we cannot delete as it is has the name "undefined", I think we have a corrupt database and would be greatful for help. We had the same problem in 2.9 I believe

Hello, no the .ini files are physically located on the WLSE as templates. The dhcp server is just a pointer to the server and the ini files using DHCP options 66 and 67.
thanks
Andy

TV@nywhere FM/TV Capture - Auto Startup?

Similar Messages

Maybe you are looking for