TV @nywhere Master, HAVE VIDEO, NO SOUND

its plugged into my soundcard's line-in, but have no sound.
VU meters for my soundcard detects sound.......no audible sound from speakers
tried just plugging in headphones on the line-out from the TV-tuner...... no sound...
everything installed properly..... just have no sound.
the radio works and i notice that it uses the pass-thru cable.
?( ?(

Try if the suggestions in this article are of any help: http://www.codecguide.com/fix_for_flash_sound_problems.htm

Similar Messages

TV@nywhere Master poor video quality with 6800 GT

I have the TV@nywhere master (8606-020) and it was working fin with my NVIDIA Geforce 6800 GT OC (256MB) but when I updated the driver to their latest version, every time I would go full-screen in MSIPVR it would make lines all through the video. I reinstalled drivers, MSIPVS and same thing. I then rolled back the NVIDIA driver, and the issue disappeared. Anyone have the same issue and know how to use the new driver from NVIDIA and get it working right? Thanks!
- Mike

Hi:
Thaniks for writing back. My comment really was directed at ellucidating how many others might have poorer quality using Nvidia 6800-based graphics cards as the originator of this thread implicated. Second, as to your comments, it would seem a good idea to stay with the old drivers. The new drivers were supposed to solve TitanTV directed recordings; this they do better, but still insufficiently at least in my hands. Maybe the only choice left is to stay with the originals. But before uninstalling the current version and installing the original, I had a third question that perhaps you could address.
Perhaps you could comment on why the driver scan at http://driveragent.com
reveals my currently up-to-date version MSI 8606 (TV@nywhere master) Audio Capture and MSI 8606 Video capture drivers are out of date? Based on the listings in Device Manager, they are currently Conexant version cx88aud.sys, 2.3.79.0 and C88Vid.SYS, 4.0.102.0. Did my drivers fail to update correctly, are there drivers for this available somewhere else, not listed on the MSI website, like Intervideo, etc, or is this website wrong? I hate to pay money to find out they are simply wrong. Do you get the same results?
doc john

Have Video, No Sound

Dell dimension 8200, re-loaded XP Pro SP3 (with full disk re-format), IE7, upgraded to IE8, sound driver from Turtle Creek Santa Cruz, windows media player plays sound WAV files ok. Installed Adobe Reader X, then Flash Player Active X 10 (latest version) - says installation completed ok. Plays video ok, no sound. Installed some codec files from download.com, didn't help. Tried ver 8, it didn't play sound either. Ken.

Try if the suggestions in this article are of any help: http://www.codecguide.com/fix_for_flash_sound_problems.htm

TV@nywhere Master sound but only black picture.

Hi
I bought an TV@nywhere Master and i have a serios problem whit it. I can get sound out of it. Both on radio and the tv part. But i just get a black picture when trying to watch tv. But the tv channels sound good. Can you give my any pointers? I curently running the latest drivers for it. My comp has windows xp sp1 installed. My comp is an P4 2,4ghz 512 ram ati radeon 9600pro whit 3.6 catalyst drivers änd directx 9.0b.
How long does it take for MSI to anwesr an e-mail?

mazk0,
Are you by chance running a dual-screen system (2 monitors)? I noticed that with my setup only my primary monitor would display the TV video. In the secondary screen - I would get a black screen and no sound.
Just a thought. Also, this might sound obvious, but make sure that your TV source is set to TV and not Composite or other. (not sure you would get any sound in this scenario, but since sound is piped through you line-in it may just be the case).
Let me know.
-MrChief

Problem with the TV@nywhere Master's sound

Hi,
I have TV@nywhere Master.
The TV picture is OK, but the sound swithcing off after about 90 seconds of playing.
Then I change station and the sound is back. But after 90 seconds it switch off again.
etc.
Does someone know how to solve this problem.
Thank You,
Mike

dear Mike
I have the same problem. to the best of my judgement, this is hardware problem and you should contact the manufacturer for warranty coverage through your dealer.
omar

Sound problems with CNBC and E4 with TV @nywhere Master

Got the TV @nywhere Master card, had no problems with tuning in the cable stations picked up all the channels, but E4 and CNBC have no sound just a anoying clicking sound. Have updated the drivers and software, tried the card with Windows 2000 SP4, and XP pro SP1, tried both internal & external audio connections, nothing makes a difference. Anyone got any idea's?

I bought and installed a TV@nywhere Master yesterday (18June03) and no sound problems at all. The Radio volume control definitely controls the line in volume, but check that the mixer Volume Control is not being muted. My Sound in via on-board sound 6 channel Realtek ACL650.
I have been generally very pleased with the results but have yet to get the remote to do anything, I have WinXP SP1 with all updates installed. Not sure if it is my System set-up or faulty remote but it a minor concern for me.
I would suggest that you take a look at VirtualVCR (freeware) for your capturing if you want more that Mpeg files. It works very well for me and allows me to capture using the frame size and codec of my choosing

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ?

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ? all my other videos are fine and they in mp4 format.

Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

My downloaded paid for video loses sound every 15 or so minutes, so I have to contstantly log out of iTunes and log back in and then it works - what's the problem (apart from what I've just said), does anybody know?

My downloaded paid for video loses sound every 15 or so minutes, so I have to contstantly log out of iTunes and log back in and then it works - what's the problem (apart from what I've just said), does anybody know?

What ISP?
What router?
Who made it, what software?
Is it just the iPad ( Anything else using wifi at your place having problems? ) ?
Give us something to go on.

Why have I no sound when listening to u tube videos?

Why have I no sound when listening to videos on u tube?

Also - instead of the audit stopping on the current song, it skipped right into another song, but still shows the time title and time remaining of the song that should be playing.

MSI TV@nywhere MASTER PCI TV Tuner card FAQ

So you’ve just decided to add a MSI TV@nywhere Master card to your PC, you’re gonna need some help installing it then!! Before you continue, I recommend you download the Unofficial New Drivers in the other sticky, to avoid any heart (and brain!) ache.
For best results also, you should be running at least DirectX 8.1. This is included on the driver CD, or you can download the latest version from Microsoft's DirectX Page. If you have a P4 which supports Hyperthreading, you will also need at least Windows XP SP2, otherwise you will have to disable hyperthreading in BIOS.
You should also be in the habit of having the latest drivers for your video card, audio card and motherboard chipset; this can also avoid any future TV software failure. And make sure you regularly run Windows Update (or use the Automatic Update feature) to keep your Windows clean and up-to-date. And also remember when installing new drivers or software, if the installer suggests you restart the computer then do so, before you install anything else! Drivers not installing correctly are common causes of problems, especially with this card!
INSTALLING THE HARDWARE
I’m presuming you’re familiar with the concepts of building and upgrading PCs, so I won’t go into too much detail on obvious stuff (like “remove the side panel of your case, locate a free PCI slot…”).
Fit the TV@nywhere Master card into a free PCI slot. If you didn’t get one with it, you’ll need a CD-audio lead from somewhere (the thin grey lead). If you have one connected between your CD drive and your soundcard CD-Audio In connector, then use that, any version of Windows after 98 supports digital audio extraction, so it is not needed there now. Connect one end of the audio lead to the 4 pin header on the TV@nywhere card and the other to the AUX input on your soundcard (or motherboard if using onboard). If you are installing the Mega TV Tuner in a Mega series barebones, connect it to the TV audio input on the mainboard to the rear. Don’t worry about using the 3.5mm jack plug lead to connect tv card audio, we don’t need it now, doing it this way.
CONNECTING YOUR TV SIGNAL
Depending on your global location, this may vary. Either way you need to connect either a aerial (ANTENNA) or cable (CABLE) to the CATV connector on the card. Someone will no doubt clarify this for me, but cable is for US-type cable, which doesn’t need a decoder box. Most people will be using the Antenna I’m guessing. Your choice of CABLE or ANTENNA needs to be remembered, you’ll need this later.
You will not be able (or have limited success) in connecting a video recorder or set-top box to the CATV connector. Instead you will need to use the Composite or S-Video connector, and connect the audio source either directly to the soundcard or to the Line-in on the TV card.
INSTALLING THE DRIVER
Don’t use the driver on the CD. Download the latest driver from the MSI download page. If you are a Mega series user, make sure that Windows has been installed onto the C: drive. If not you’ll have to reinstall, and disable the USB controller in BIOS to prevent the card readers becoming the C: and D: drives. This also causes problems later.
I would advise temporarily disabling any anti-virus programs at this point, to avoid any complications.
When you start up after first installing the card, cancel any Found New Hardware wizards that appear. OK, so extract the contents of the downloaded ZIP, and run the PVSSetup.exe file to install the drivers. Once this is complete, RESTART your PC and the drivers will be installed for the new hardware found.
Check in Device Manager, there should be four new hardware listed under Sound, Video and Game Controllers related to MS8606. If you see any with the (?) next to them, you might need to try the card in another slot.
INSTALLING THE MSIPVS TV SOFTWARE
If you wish to use other TV recording software other than MSIPVS then please feel free to do so.
MSI do not make their own software. At least not all the time. MSIPVS is a rebranded version of Intervideo’s WinDVR software, with extra features added such as network streaming for TV@nywhere. Some people love it. Lots of people hate it. Generally most people who have posted here hate it. People who love it tend not to post if they don't have problems. The people that hate it generally mess initial settings up, which can cause problems when they try to change it. The more patient of us will always get it eventually right!
Install the MSIPVS software. Easy as that. Its setting it up correctly that’s the tricky part. Listed below are the main things to look for when performing initial setup. If you are unsure about anything else then read the manual! Only a complete genius would dare install any unfamiliar hardware without having the manual handy for reference - how do you suppose I learnt anything?
Device
Video Input:
"Device" is always the Conexant Cx2388x Video Capture"
"Source" - select TV if you are connecting your signal to the CATV connector (antenna or cable), select S-Video or Composite if using these instead
"Standard" - set this to your local TV standard, eg if in UK set to "PAL-I". if unsure, do a Google search and find out!!
If you don't set these correctly you won't receive any channels and/or they will appear incorrectly.
Audio Input:
"Device" will be your soundcard or onboard audio device
"Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.
TV
Tuner:
"Input" will be Antenna if you have an aerial connected, or Cable if you are connected to unencoded cable TV.
"Country or Region" - if need to explain this one then maybe you shouldn't have this card!
Channel
Now we will see if your settings and TV signal are good! Tick the Freescan box, and then click on Autoscan. This may take a while, and for a short time it may appear that the program is doing nothing. Patience! It will soon start, and then pick up any available channels it can find.
Make sure you have a good strong signal if you are using an aerial, otherwise TV@nywhere won’t pick up as many channels. UK viewers – just using a simple set-top aerial and signal booster, I could even receive Channel Five (or “five” as it is known now!)
So at this point now, if all has gone well, you should be able to watch and record TV on your PC! If it hasn't...

"I've lost my CDs and MSIPVS needs a serial number to install!"
MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!
"When installing MSIPVS, the program hangs then shows a message saying "remote procedure call failed" "
If you are a Mega user, you have installed Windows onto a partition other than C:. You will need to reinstall Windows, making sure you disable USB controller in BIOS, so that the card readers do not take up C: and D: drives. Upon first restart (after Windows has created partition), you may re-enter BIOS and enable USB controller before Windows continues installing itself.
"MSIPVS installs, but when I start the application I get an error message "WinDVR has caused a problem and needs to shutdown" "
hpkuo credits this to sizzle in his hints and tips thread, but I'll elaborate a little. The problem is caused by QuickTime codecs installed by Nero 6.3.1.15. It is unclear whether later versions of Nero were fixed, but earlier versions should be okay. "A "quick fix" is to rename the files "NeQTADec.ax" and "NeQTVDec.ax" in "C:\Program Files\Common Files\Ahead\DSFilter\"."
Another alternative suggestion is to uninstall the codecs from the registry. I found this solution in another forum for another TV card with same problem:
Go to Start > Run (or press Windows key + R) and enter:
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTADec.ax"
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTVDec.ax"
The only consequence seems to be that Nero Vision can’t decode Apple Quick time format after this (something I can live with)
If you do require QuickTime codecs to be installed, there is the Quicktime alternative available from here: http://www.free-codecs.com/download/QuickTime_Alternative.htm . Or you could just use an earlier version of Nero.
PS if you are using a non-english setup of Windows, then the above paths will relate to how windows translates on your PC - ie subsitute Program Files etc for your local translation
"I have connected the external audio lead to the Line-In (blue) jack on my mobo, and set it correctly in MSIPVS, but I hear no TV sound"
If your mobo supports 5.1 speakers but only has three jacks on rear, the Line-in and Mic jacks have been configured to act as Rear Speaker and Center/Sub outputs. If you have only two speakers, they should be connected to the green Front Speaker jack. You will need to go into your audio hardware's configuration panel / Windows Audio Device Properties to correctly configure the rear jacks.
The other alternative is to use the internal audio connector - simply use a CD-audio lead to connect it to the AUX or CD internal connector on your mobo or soundcard. CD audio leads (the analog grey lead from your CD drive to the soundcard / mobo CD audio connector) are redundant now, as Windows now uses digital audio extraction through IDE channel. Make sure you set the audio signal correctly in MSIPVS to match this.
"When I start up Windows I can hear a hissing like "static" / the radio is playing"
One issue that was fixed in the latest Drivers; if that still doesn't work then the Radio volume is not muted at Windows startup. I'll let hschroed take over here:
"Both MSI Radio and MSI PVS, unmute the TV card at program start, and mute the TV card at SUCCESSFUL program exit (remember we are not talking about the soundcard mixer state here). What this means is as long as a single program start and a single SUCCESSFUL program exit takes place, the TV card tuner will be muted, regardless of what the soundcard mixer audio source states are. If the PC is rebooted (without a PC power-off), for whatever reason, while the MSI Radio or MSI PVS program is executing (a successful exit has not been performed), the TV card will remain in an unmuted state until the next startup and successful exit of either of the two programs.
The TV card mute/unmute status is carried over a reboot without PC power off. What this means is that after a PC power on, once the TV card has been properly muted by a start and successful exit of the MSI program, the TV card mute/unmute status should be in proper synchronization with the applications (regardless of the soundcard mixer status), as long as the PC is not powered off. (Romulus mentions computer coming out of standby. I did not test that scenario but I would expect that if going into standby means power is stopped to TV card, the effect would be similar to a PC power off)."
"My regular TV receives all 5 channels (even Channel Five!), but when I connect aerial to TV@nywhere I only get 3"
Common to all TV tuner hardware (not just MSI's!) is the need for a good strong signal. A moderate signal might appear okay on a regular domestic TV, but might not be strong enough for the TV tuner hardware. Consider investing in a good signal booster, or getting your aerial changed.
Consequently, I have also learned today that TOO strong a signal is bad for TV tuner cards, as soon as I know more I'll let you know...
"I have connected my VCR to the CATV connector, but it does not appear when autoscanning."
"I cannot receive any channels when I connect my Sky box to the RF (CATV) connector."
Thanks to a wonderful technology called "Macrovision" protection, many VCRs and satellite/cable boxes won't work in this way by connecting them using their RF output. Anyone who gets a result is very lucky. There's always the Composite and S-Video In connectors to try. But either way, the TV@nywhere card won't scan all their channels, you'll still have to change them manually.
"Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
"MSIPVS keeps defaulting my location back to Afghanistan, even though I set it to US / UK/ Sweden / Latvia / Kazahkstan"
You will need to reinstall the drivers and software due to a glitch. Uninstall MSIPVS and the tuner drivers (with its PVSSetup.exe setup program) then restart your PC, and ignore the Found New Hardware wizard. Install the tuner drivers with the PVSSetup.exe program, then restart your PC. Then install MSIPVS, restart your PC and you're good to go again!
"Where can I find these "Unofficial New Drivers" that people keep referring to here?"
The "Unofficial New (BETA) Drivers" became obsolete when MSI officially released them. You can find them on the Product Support page for this card, as they are now the latest drivers. MSI TV@nywhere Master product page
[Last edited 8th October 05 by Dr Stu]

Tv@nywhere Master Blue Screaning

Ok, got the Tv@nywhere Master a couple of weeks ago ad have had a blue screen error with it ever since. When shutting down/restarting/hibernating Windows just goes into a blue screen. The error says:
"IRQ_NOT_EQUAL_TOO_OR_LESS" or some sort. The error is pinpointed at the file: "cx88aud.sys". This problem is being caused by the TvAnywhere card. I have downloaded and installed the newest drivers and on my first restart it worked fine but when I went to restart or shut down this box it just started to blue screen again with the error.
I have searched through the Microsoft site and have came back with nothing that could fix the problem with a windows patch. The newest drivers dont seem to make a differance at all either. Has anyone else got this problem and/or know of a way to fix it.
Im running 2200xp, MSI K6 Delta, 1 gig Ram aand Audigy and CMedia [onboard] sound cards on a Windows XP Pro box. If it helps.
* Winters

I am also getting BSD when I run a program called Video Studio version 8.0. I didn't have this problem when I was running the onboard sound card, but when I upgraded to the Audigy 2 card, I get a BSD saying the CC88XBAR.sys has produced a page fault. I think it may be a conflict with the soundblaster drivers. Try removing you sound card and its drivers and try the TV@nywhere without it, just for troubleshooting. Good Luck

TV@nywhere Master Recording Problems

The TV@nywhere Master works fine for viewing, but I can't record without problems. There is a sound problem with all available versions of WinDVR. The recorded sound regularly "warbles" or pulsates. It is detectable when a musical tone is playing, otherwise it may be hard to hear. It is very annoying once you pick up on it. Other interVideo programs WinProducer and WinDVD Recorder exhibit the same problem.
I tried PowerVCR and I get an error message when attempting to record in MPEG2:
S0009 : Unable to render preview video stream.
I have all the latest drivers and software versions. I even tried a clean install of Windows several times and a different sound card, but no luck. I'm getting nowhere with tech support. Very frustrating.
ASUS A7N8X Deluxe MB
Onboard nForce2 sound (also tried Soundblaster Audigy)
AMD 2800+ Barton CPU
512MB DDR RAM
GeForce 5600 Video Card
250 Gig Hard drive
Windows XP

Using PowerVCR II 3.0, and there is no Use Smart Tee option available.
Here's all the options:
Video -> Overlay Options -> Overlay/Non-Overlay (Non-overlay causes a crash)
Profiles
Check boxes for MMX, SSE, 3DNow and Enhanced 3DNow. All are checked.
Recording / Advanced -> Advanced Options
Video Smoothing (during recording) - unchecked
Intelligent Noise Removal (during recording) checked
Enable Time-Shifting when recording - unchecked
Have tried changing most of these settings but always get error message, unless I use MPEG1 which is not acceptable quality.
I did a search in Help for "Smart" and for "Tee" and there are no matches.

Numerous Problems with New TV@nywhere Master

Greetings all. A few days ago, I purchased a TV@nywhere Master card. I own two MSI mainboards and an MSI video card that I think are great, but so far this product has been nothing but junk. I am having numerous problems with it that I have not been able to resolve:
1. The remote control just plain doesn't work.
2. I am unable to adjust the TV volume within the MSIPVR tuner software. Turning it up and down or muting it does nothing. However, whenever I exit the program, it mutes the line-in jack on my sound card and doesn't unmute it when I run the program again! I have to run the Creative Surround Mixer and unmute the jack before I get any TV audio.
3. Originally when I booted up, the radio tuner kicked in with a fuzzy feed, even though the software was not running. I had to run the software and exit it to make this stop. I believe this has resolved itself.
4. The MSIPVR software seems very unstable.
I have tried updating all the software from the official MSI drivers page and I also tried the unofficial releases of both the drivers and the MSIPVR 3.0 beta from this forum. The 3.0 beta build seems even more unstable (though it is a beta so this is understandable), but none of my other problems have been resolved either. I've perused the forums looking for ideas, but haven't found anything that's worked. I've also tried all these steps on two different systems that I have with the same results.
I'm really shocked that MSI would release such a low-quality product as most of their other things are quite well made. I am looking to see if anyone has suggestions I can try to resolve this. I am interested in keeping this card if these can be fixed, but if not, I'll be returning this unit and picking up something from ATI instead. There's absolutely no reason for a card to be runnign this poorly and be in a shipping state.
Below are my system specifications should they be of any help:
AthlonXP 2800+ FSB333
MSI K7N2 Delta-L nForce 2
1024MB PQI PC3700 LL
Sound Blaster Audigy
ATI RADEON 9600XT
Promise FastTrak TX2000
2x40GB Western Digital 8MB (In RAID 0 Stripe)
Windows XP Professional Service Pack 2
All Latest Drivers/Updates for Windows and All Hardware

Quote from: TunerFAQ on 17-February-05, 10:17:47
One more note (great stuff Stu:))... with regards to the remote... try to give it a slight extra push into the socket :D.
As stupid as it sounds, it happens :p... at least with me it did. I kept on trying to get the remote to work in the beginning, only to find out in the end that I hadn't played it ALL the way into the input socket. After the click, it worked.
I hope you can get the sound stuff working though. That's definitely a pain :(. I'm personally having issues with the original card and new software now... but yeah, I shall wait on your feedback first:).
OK, I've finally had some time to try out the various other suggestions that have been made and unfortunately, have met with no success. I tried changing my audio to CD In on my Audigy which still has the same sound problems. I also checked out the connection with the remote and it is in all the way. Still no go on that one. My power supply ratings are:
+5V: 35A Maximum/0A Minimum
+12V: 24A Maximum/0.8A Minimum
+3.3V: 28A Maximum/0A Minimum
-5V: 0.5A Maximum/0A Minimum
-12V: 1.0A Maximum/0A Minimum
+5V SB: 2.0A Maximum/0A Minimum
At this point, I'm pretty much at my wits end. If anyone has other ideas, I can entertain them, but tomorrow if I don't have this up, I'll be taking it back. This card is demonstrating itself as just poorly designed and built. Thanks for your help all!

TV@nyWhere Master Audio

Hi,
When I switched to DP35 Intel mother board the installation of tv@nywhere master card seemed to be successful, but when I tuned the tv channel I could find video signal only NO Sound at all. All drivers are NEW, MSI PVS was installed prior to Card installation as advised by MSI team. I also uninstalled the Codecs, but still no Audio.
Secondly PVS3 programme shows Audio Source " CD Player" while I'm using "Line In" of Mother Board. There is no other option available for Audio Input. System DP35 Intel with 2.66 Mhz processor, MSI 8600 GTS Diamond Plus, Modem and TV@nywhere Master Capture Card. Xp professional with SP2.
Any help will be appriciated.
Bye
Ork

does your motherboard have an audio input connector (similar to that found on optical drives)?
As I advise in my lengthy sticky topic, you should connect a cd audio lead from the tv card to the audio in connector, if there is one
Also, check in Windows Volume control, and under Recording settings, make sure the Line In control is ticked

TV @nywhere Master, HAVE VIDEO, NO SOUND

Similar Messages

Maybe you are looking for