TV@nywhere Master Plus AVI recording
Anyone tried recording AVI (with Huffyuv codec for example) with the new TV@nywhere Master Plus?
I'm only interested in recording in "raw" AVI since I want the best quality and editing possibilities.
Since my TV@nywhere Master crashed I want to have another one and the follower seems to be what I want.
I bought a Hauppauge Win TV PCI but it's not as sharp as the MSI card was, though the material sharps up nice in VirtualDub during post-processing with it's filters.
Also the colors are a little bit dampened in comparison to the bright colors that the MSI card delivered, and this is probably also why the Hauppauge feels a little bit more natural in that area.
But most of all I miss the sharpness the MSI card delivered.
Using PowerVCR II 3.0, and there is no Use Smart Tee option available.
Here's all the options:
Video -> Overlay Options -> Overlay/Non-Overlay (Non-overlay causes a crash)
Profiles
Check boxes for MMX, SSE, 3DNow and Enhanced 3DNow. All are checked.
Recording / Advanced -> Advanced Options
Video Smoothing (during recording) - unchecked
Intelligent Noise Removal (during recording) checked
Enable Time-Shifting when recording - unchecked
Have tried changing most of these settings but always get error message, unless I use MPEG1 which is not acceptable quality.
I did a search in Help for "Smart" and for "Tee" and there are no matches.
Similar Messages
-
TV@nywhere Master Recording Problems
The TV@nywhere Master works fine for viewing, but I can't record without problems. There is a sound problem with all available versions of WinDVR. The recorded sound regularly "warbles" or pulsates. It is detectable when a musical tone is playing, otherwise it may be hard to hear. It is very annoying once you pick up on it. Other interVideo programs WinProducer and WinDVD Recorder exhibit the same problem.
I tried PowerVCR and I get an error message when attempting to record in MPEG2:
S0009 : Unable to render preview video stream.
I have all the latest drivers and software versions. I even tried a clean install of Windows several times and a different sound card, but no luck. I'm getting nowhere with tech support. Very frustrating.
ASUS A7N8X Deluxe MB
Onboard nForce2 sound (also tried Soundblaster Audigy)
AMD 2800+ Barton CPU
512MB DDR RAM
GeForce 5600 Video Card
250 Gig Hard drive
Windows XPUsing PowerVCR II 3.0, and there is no Use Smart Tee option available.
Here's all the options:
Video -> Overlay Options -> Overlay/Non-Overlay (Non-overlay causes a crash)
Profiles
Check boxes for MMX, SSE, 3DNow and Enhanced 3DNow. All are checked.
Recording / Advanced -> Advanced Options
Video Smoothing (during recording) - unchecked
Intelligent Noise Removal (during recording) checked
Enable Time-Shifting when recording - unchecked
Have tried changing most of these settings but always get error message, unless I use MPEG1 which is not acceptable quality.
I did a search in Help for "Smart" and for "Tee" and there are no matches. -
Hi,
When I switched to DP35 Intel mother board the installation of tv@nywhere master card seemed to be successful, but when I tuned the tv channel I could find video signal only NO Sound at all. All drivers are NEW, MSI PVS was installed prior to Card installation as advised by MSI team. I also uninstalled the Codecs, but still no Audio.
Secondly PVS3 programme shows Audio Source " CD Player" while I'm using "Line In" of Mother Board. There is no other option available for Audio Input. System DP35 Intel with 2.66 Mhz processor, MSI 8600 GTS Diamond Plus, Modem and TV@nywhere Master Capture Card. Xp professional with SP2.
Any help will be appriciated.
Bye
Orkdoes your motherboard have an audio input connector (similar to that found on optical drives)?
As I advise in my lengthy sticky topic, you should connect a cd audio lead from the tv card to the audio in connector, if there is one
Also, check in Windows Volume control, and under Recording settings, make sure the Line In control is ticked -
TV@nywhere Master and TVR software
After a search, I found that Stu had posted in a seperate thread as follows:
Quote from: Stu on 24-September-06, 22:06:08
i recommend trying out the TVR software (from the TV@nywhere Plus page)
As I had posted earlier in a separate thread https://forum-en.msi.com/index.php?topic=107765.0 of my problem of the PVS coming on and disappearing, I thought that I would try the TVR software!
Installation went fine ... and yeah no serial no. was asked ... is this freeware? Anyways, when I click on the "Watch and Record DTV Program", I get a message stating Quote
Cannot Set capture device...
(1000)
Can someone help me .... let me know how I can set up my device without entering the program?
I'm using:
MSI TV@nywhere Master
MSI P965 Neo MoBo
WinXP Professional
C2D E6400
1GB Ram
7300GT
Looking forward to getting any assistance in helpin me use this card ... either with TVR or MSIPVS.
Thanks & Cheers!Quote from: Paparazzi on 13-May-07, 13:32:40
Installation went fine ... and yeah no serial no. was asked ... is this freeware? Anyways, when I click on the "Watch and Record DTV Program", I get a message stating Can someone help me .... let me know how I can set up my device without entering the program?
Do you have sound card?
I am using TV@Anywhere Plus on Vista Ultimate. And I encountered the same thing. When I ran the TV card for the first time on Vista to check if it works fine, it gave me the same message, "cannot set capture device".
I realized that my sound card driver is not yet installed. So I installed the driver for my Creative sound card but since Creative doesn't have an updated driver for Vista at this moment, I did some searching and found a 3rd party software that's compatible with my sound card and Vista - and that fixed the problem.
I am not sure if that will also apply on you.
Note;
If you're using a sound card and haven't installed the driver yet. Try to install it. Maybe that will fix it. -
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
So you’ve just decided to add a MSI TV@nywhere Master card to your PC, you’re gonna need some help installing it then!! Before you continue, I recommend you download the Unofficial New Drivers in the other sticky, to avoid any heart (and brain!) ache.
For best results also, you should be running at least DirectX 8.1. This is included on the driver CD, or you can download the latest version from Microsoft's DirectX Page. If you have a P4 which supports Hyperthreading, you will also need at least Windows XP SP2, otherwise you will have to disable hyperthreading in BIOS.
You should also be in the habit of having the latest drivers for your video card, audio card and motherboard chipset; this can also avoid any future TV software failure. And make sure you regularly run Windows Update (or use the Automatic Update feature) to keep your Windows clean and up-to-date. And also remember when installing new drivers or software, if the installer suggests you restart the computer then do so, before you install anything else! Drivers not installing correctly are common causes of problems, especially with this card!
INSTALLING THE HARDWARE
I’m presuming you’re familiar with the concepts of building and upgrading PCs, so I won’t go into too much detail on obvious stuff (like “remove the side panel of your case, locate a free PCI slot…”).
Fit the TV@nywhere Master card into a free PCI slot. If you didn’t get one with it, you’ll need a CD-audio lead from somewhere (the thin grey lead). If you have one connected between your CD drive and your soundcard CD-Audio In connector, then use that, any version of Windows after 98 supports digital audio extraction, so it is not needed there now. Connect one end of the audio lead to the 4 pin header on the TV@nywhere card and the other to the AUX input on your soundcard (or motherboard if using onboard). If you are installing the Mega TV Tuner in a Mega series barebones, connect it to the TV audio input on the mainboard to the rear. Don’t worry about using the 3.5mm jack plug lead to connect tv card audio, we don’t need it now, doing it this way.
CONNECTING YOUR TV SIGNAL
Depending on your global location, this may vary. Either way you need to connect either a aerial (ANTENNA) or cable (CABLE) to the CATV connector on the card. Someone will no doubt clarify this for me, but cable is for US-type cable, which doesn’t need a decoder box. Most people will be using the Antenna I’m guessing. Your choice of CABLE or ANTENNA needs to be remembered, you’ll need this later.
You will not be able (or have limited success) in connecting a video recorder or set-top box to the CATV connector. Instead you will need to use the Composite or S-Video connector, and connect the audio source either directly to the soundcard or to the Line-in on the TV card.
INSTALLING THE DRIVER
Don’t use the driver on the CD. Download the latest driver from the MSI download page. If you are a Mega series user, make sure that Windows has been installed onto the C: drive. If not you’ll have to reinstall, and disable the USB controller in BIOS to prevent the card readers becoming the C: and D: drives. This also causes problems later.
I would advise temporarily disabling any anti-virus programs at this point, to avoid any complications.
When you start up after first installing the card, cancel any Found New Hardware wizards that appear. OK, so extract the contents of the downloaded ZIP, and run the PVSSetup.exe file to install the drivers. Once this is complete, RESTART your PC and the drivers will be installed for the new hardware found.
Check in Device Manager, there should be four new hardware listed under Sound, Video and Game Controllers related to MS8606. If you see any with the (?) next to them, you might need to try the card in another slot.
INSTALLING THE MSIPVS TV SOFTWARE
If you wish to use other TV recording software other than MSIPVS then please feel free to do so.
MSI do not make their own software. At least not all the time. MSIPVS is a rebranded version of Intervideo’s WinDVR software, with extra features added such as network streaming for TV@nywhere. Some people love it. Lots of people hate it. Generally most people who have posted here hate it. People who love it tend not to post if they don't have problems. The people that hate it generally mess initial settings up, which can cause problems when they try to change it. The more patient of us will always get it eventually right!
Install the MSIPVS software. Easy as that. Its setting it up correctly that’s the tricky part. Listed below are the main things to look for when performing initial setup. If you are unsure about anything else then read the manual! Only a complete genius would dare install any unfamiliar hardware without having the manual handy for reference - how do you suppose I learnt anything?
Device
Video Input:
"Device" is always the Conexant Cx2388x Video Capture"
"Source" - select TV if you are connecting your signal to the CATV connector (antenna or cable), select S-Video or Composite if using these instead
"Standard" - set this to your local TV standard, eg if in UK set to "PAL-I". if unsure, do a Google search and find out!!
If you don't set these correctly you won't receive any channels and/or they will appear incorrectly.
Audio Input:
"Device" will be your soundcard or onboard audio device
"Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.
TV
Tuner:
"Input" will be Antenna if you have an aerial connected, or Cable if you are connected to unencoded cable TV.
"Country or Region" - if need to explain this one then maybe you shouldn't have this card!
Channel
Now we will see if your settings and TV signal are good! Tick the Freescan box, and then click on Autoscan. This may take a while, and for a short time it may appear that the program is doing nothing. Patience! It will soon start, and then pick up any available channels it can find.
Make sure you have a good strong signal if you are using an aerial, otherwise TV@nywhere won’t pick up as many channels. UK viewers – just using a simple set-top aerial and signal booster, I could even receive Channel Five (or “five” as it is known now!)
So at this point now, if all has gone well, you should be able to watch and record TV on your PC! If it hasn't..."I've lost my CDs and MSIPVS needs a serial number to install!"
MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!
"When installing MSIPVS, the program hangs then shows a message saying "remote procedure call failed" "
If you are a Mega user, you have installed Windows onto a partition other than C:. You will need to reinstall Windows, making sure you disable USB controller in BIOS, so that the card readers do not take up C: and D: drives. Upon first restart (after Windows has created partition), you may re-enter BIOS and enable USB controller before Windows continues installing itself.
"MSIPVS installs, but when I start the application I get an error message "WinDVR has caused a problem and needs to shutdown" "
hpkuo credits this to sizzle in his hints and tips thread, but I'll elaborate a little. The problem is caused by QuickTime codecs installed by Nero 6.3.1.15. It is unclear whether later versions of Nero were fixed, but earlier versions should be okay. "A "quick fix" is to rename the files "NeQTADec.ax" and "NeQTVDec.ax" in "C:\Program Files\Common Files\Ahead\DSFilter\"."
Another alternative suggestion is to uninstall the codecs from the registry. I found this solution in another forum for another TV card with same problem:
Go to Start > Run (or press Windows key + R) and enter:
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTADec.ax"
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTVDec.ax"
The only consequence seems to be that Nero Vision can’t decode Apple Quick time format after this (something I can live with)
If you do require QuickTime codecs to be installed, there is the Quicktime alternative available from here: http://www.free-codecs.com/download/QuickTime_Alternative.htm . Or you could just use an earlier version of Nero.
PS if you are using a non-english setup of Windows, then the above paths will relate to how windows translates on your PC - ie subsitute Program Files etc for your local translation
"I have connected the external audio lead to the Line-In (blue) jack on my mobo, and set it correctly in MSIPVS, but I hear no TV sound"
If your mobo supports 5.1 speakers but only has three jacks on rear, the Line-in and Mic jacks have been configured to act as Rear Speaker and Center/Sub outputs. If you have only two speakers, they should be connected to the green Front Speaker jack. You will need to go into your audio hardware's configuration panel / Windows Audio Device Properties to correctly configure the rear jacks.
The other alternative is to use the internal audio connector - simply use a CD-audio lead to connect it to the AUX or CD internal connector on your mobo or soundcard. CD audio leads (the analog grey lead from your CD drive to the soundcard / mobo CD audio connector) are redundant now, as Windows now uses digital audio extraction through IDE channel. Make sure you set the audio signal correctly in MSIPVS to match this.
"When I start up Windows I can hear a hissing like "static" / the radio is playing"
One issue that was fixed in the latest Drivers; if that still doesn't work then the Radio volume is not muted at Windows startup. I'll let hschroed take over here:
"Both MSI Radio and MSI PVS, unmute the TV card at program start, and mute the TV card at SUCCESSFUL program exit (remember we are not talking about the soundcard mixer state here). What this means is as long as a single program start and a single SUCCESSFUL program exit takes place, the TV card tuner will be muted, regardless of what the soundcard mixer audio source states are. If the PC is rebooted (without a PC power-off), for whatever reason, while the MSI Radio or MSI PVS program is executing (a successful exit has not been performed), the TV card will remain in an unmuted state until the next startup and successful exit of either of the two programs.
The TV card mute/unmute status is carried over a reboot without PC power off. What this means is that after a PC power on, once the TV card has been properly muted by a start and successful exit of the MSI program, the TV card mute/unmute status should be in proper synchronization with the applications (regardless of the soundcard mixer status), as long as the PC is not powered off. (Romulus mentions computer coming out of standby. I did not test that scenario but I would expect that if going into standby means power is stopped to TV card, the effect would be similar to a PC power off)."
"My regular TV receives all 5 channels (even Channel Five!), but when I connect aerial to TV@nywhere I only get 3"
Common to all TV tuner hardware (not just MSI's!) is the need for a good strong signal. A moderate signal might appear okay on a regular domestic TV, but might not be strong enough for the TV tuner hardware. Consider investing in a good signal booster, or getting your aerial changed.
Consequently, I have also learned today that TOO strong a signal is bad for TV tuner cards, as soon as I know more I'll let you know...
"I have connected my VCR to the CATV connector, but it does not appear when autoscanning."
"I cannot receive any channels when I connect my Sky box to the RF (CATV) connector."
Thanks to a wonderful technology called "Macrovision" protection, many VCRs and satellite/cable boxes won't work in this way by connecting them using their RF output. Anyone who gets a result is very lucky. There's always the Composite and S-Video In connectors to try. But either way, the TV@nywhere card won't scan all their channels, you'll still have to change them manually.
"Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
"MSIPVS keeps defaulting my location back to Afghanistan, even though I set it to US / UK/ Sweden / Latvia / Kazahkstan"
You will need to reinstall the drivers and software due to a glitch. Uninstall MSIPVS and the tuner drivers (with its PVSSetup.exe setup program) then restart your PC, and ignore the Found New Hardware wizard. Install the tuner drivers with the PVSSetup.exe program, then restart your PC. Then install MSIPVS, restart your PC and you're good to go again!
"Where can I find these "Unofficial New Drivers" that people keep referring to here?"
The "Unofficial New (BETA) Drivers" became obsolete when MSI officially released them. You can find them on the Product Support page for this card, as they are now the latest drivers. MSI TV@nywhere Master product page
[Last edited 8th October 05 by Dr Stu] -
Tv@nywhere Master - Cant capture higher than 352X288
Hi
I have a Tv@nywhere Master and i cant capture any higher that 352x288 resolution.
I tryed VirtualDub and Adobe Premier . They both say : Unsuported Video Format when i try to select 640x480 or 720x576 . (PAL mode)
The original software (MSIPVS) lets me choose the format and resolution but i dont want to use it because it offers poor quality.
I am capturing from VHS at maximum quality possible and storing it in AVI uncompressed and then use TMPEGenc to SVCD.
Can anyone comment on this ?
Doesnt this board capture higher than 352x288 ???
Thank you
FilipeI use it in 768x576 without any problems
you just have to look for a Use Smart Tee Filter setting because the card can`t both capture and preview over 288 so you`ll need to split the data on the Capture pin in order to provide preview over 288 lines. -
Media Center Deluxe II w/Tv@nywhere Master (settings not saving)
Hi!
I have a MSI FX5600 VTDR128 and a Tv@nywhere Master running on Win XP (original version - only applied a USB 2.0 patch). Everything works great after I installed all drivers, software, and updates.
However, I have one anoying problem. When I use Media Center Deluxe II (MCD2) and choose to watch TV, the TV capture device is set by default to the nVidia WDM driver NOT my Conexant device. So, I change the setting in Setup and go through the settings. Then viola! I have beautiful TV on PC in MCD2. But when I close MCD2 and reopen it, my TV Capture device setting resets to the nVidia WDM capture driver.
It is annoying when I just want to hit "Power" on the remote and watch TV. Instead each time I have to change my setting to the correct Capture device.
I have begun looking at config files and registry settings, but to date, have not found a fix or work around.
Any thoughts or help would be much appreciated.
I have installed all of the patches from the MSI site, (except for the nVidia driver 44.xx version - I am running 43.xx).
Thanks!!
-MrChief
Running:
Gigabyte 7VAXP
AMD Athlon XP 2600+
1GB Ram
Maxtor 160GB HD
IBM 45GB HD
MSI FX5600 VTDR128
MSI Tv@nywhere Master
Win XP (2600) + a single USB2.0 patchyeah i know what you are going thru i've got the same problem,
i use my pc to record tv-shows and watcht them on my tv
but because it's so quit i've got to turn the volume high,
so if i forget that and watch tv its very loud
anybody got an idea how to boost the volume ? -
1_ I purchased a MSI TV@nywhere Master card on July.2003 for £49.10.
2_ NEVER WORKED.
3_ it’s been in & out of my last two PCs at every new development, e.g. driver updates, etc MORE THAN 50 TIMES.
4_ My latest PC’s spec is; 2.8 Pentium 4, 1GB DDR RAM, GeForce FX 5600 256MB DDR RAM, 440GB HDD, 650W power supply, Audigy sound, Window$ XP Pro c/w SP1.
5_ I disabled every unused resource in the BIOS, e.g. parallel port, etc.
6_ All I left in the case eventually is the graphics card and THE CARD.
7_ AND I am still getting CODE12 error, and my graphics card disappears. Apparently there is not enough resources. What I can’t understand is how come everything works perfectly fine, there are plenty resources for every thing in the PC but as soon as I put THE CARD all resources disappear?
8_ I tried the card on every PCI slot on its own, just with the graphics card.
9_ This is beyond belief. I purchased this card genuinely thinking that I could watch the news, etc while I am working on my PC, and what I’ve been through as a customer is utterly unbelievable and disgusting.
If anybody in this forum has any idea I would appreciate it.
Regards
vkI have the tv anywhere master and had the same problem..
but after a few days I got it working now only sound problems
records and playback with sound but real time the sound stopped.... dunno yet
here is what I did... warning this can be TRICKY but it worked
first disable Paralel ports any USB and anything you dont need..
also any sound blaster emulation should be disabled.
go into device manager
under system devices
double click PCI BUS, hit the PCI Steering (tab)
Uncheck all but these 2....
USE PCI STEERING
and Get table from real mode to PCIBIOS
reboot
see how or if they all loaded.
if this dont work you may have to Reserve IRQ disabling some device reboot and allow those enabled devices to find opther IRQs
then enable your other and remove reserved ones and reboot
I was told that this would never ever work with only 15 IRQ's
Glad they were wrong
that is simple now,
the sound is my problem
I have used the line in\out between cards
then tried CD aux. cable between them.... as someone suggested
neither has worked.
Dunno
Hope this helps -
TV @nywhere Master Resolved and Unresolved issues
Hi all, I'm new to this forum and to MSI products.
I have a P4P800 asus mobo + P4 2.4 GHZ/800fsb cpu + 9700 ati graphics card + 1 Gig of OCZ Ram (matched 3200 ddr in dual channel mode) and of course a TV @nywhere Master capture/tuner card. Oh yeah, Windows XP Pro.
All the drivers are the most recent release except for the 9700 which is the second most recent.
Good stuff:
FM radio works fine although I can't seem to record FM in stereo??
Capture works well too, I've been busy capturing the old hi-8 cam-corder memorys!
Broadcast recording works fine too once I figured out that I can't get a DVD capture quality in the audio because my onboard audio only samples up to 44.1! Result is distorted sound.
Remote works fine too.
Bad stuff:
Video will freeze sometimes when watching TV content.
All too frequently, I can't completely close the TV tuner down by any means.
I am always left with a frozen video image and audio still working. I can activate the FM tuner but it reverts back to TV audio when I shut it down! Task manager will shut it down 1 in 10 times and no matter what, I don't see the usual system resource usage when it's hung.
Usually when I succeed in shutting down with the task manager I cannot restart the TV tuner. Last Night I got it shut down and after doing a bit of web-browsing, I pushed the remote power button and it sprang to life! ?(
I think this ties into the very slow restarts when the card hangs on closing. I usually will attempt a restart after it hangs and find if I wait, it will restart eventually. I usually get fed-up and push reset!
Thats my experience so far and I think I could be happy with this card except for this hang-on-closing issue.
I would appreciate any ideas!I forgot to mention one other small issue.
About 80% of the time, when turning on the computer, there is a lot of electrical noise and hiss coming from the card. I turn the radio on and off and things are quiet again. ?( -
Transfering NTSC VHS using TV @nywhere Master....Plz Help!
Hi!
Im trying to transfer NTSC VHS using Philips VR422 VHS Video Recorder. This is able to play NTSC VHS Video's normally on any TV.
But When I use TV @nywhere Master it doesnt display properly and I only get it in black and while and the display sometimes has a bar at the top and/or bottom usually flickering displaying a previous part of the recording.
Now I have used the Coax/Phono(RCA)/S-Video inputs from the Coax source and the both scart connecters (ex1 & 2) using a scart coverter connector and still have the same problem.
Now I live in the UK and obviously here it's PAL-I but i have tried from setup/installation both NTSC (& NTSC-M) and PAL-I and still get it in black and white!, ive tried changing these after installation with no joy!, I have used the original drivers and have the latest WDM drivers and PVR1 & 3 downloaded from the MSI website.
I have no probs with the sound coming in through L/R Phono's to 3.5mm using the Line-In.
Does anyone know how to get this setup so it players normally through the TV @nywhere Master or could someone help me in finding either a DVD recorder that can do it or a service (local to Birmingham,UK) which i can use as I need to get these done ASAP!!... HELP!!!unfortunately there are two versions of TV@nywhere Master; if you have the PAL one (for Europe) then it won't work with NTSC signals (or vice-versa)
-
I finally got the TV@nywhere master working
After installing winamp 5 and this plugin:
http://winamptv.zapto.org/
I didn't install MSIPVS.
I finally got my TV@nywhere master working under XP SP1.
I've got all the channels and a good video and sound quality.
I didn't install the new drivers, the ones I got with the card are working fine.
I hope anyone can solve their problems the same way...
TVANYWHERE is real fun, now it works....I have that plugin and it works wonderfully. Although you cannot actually record television from it and thats one big loss. I'm still having trouble with mine blue screaning when shutting down, restarting, hibernating or standby. [ see this threadand help me! ]. I use the card to do a lot of recording and tis just annoying now.
-
How get all record from master and matching record from detail
hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamirhi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid -
TV@nywhere Master (MS-8606) + its programs
hi i did something stupid. i have lost all the cds that came bundled with the TV@nywhere Master (MS-8606). now after a format of my hard drive, i can not use the tv tuner. anybody got any clues where to find all the software, including the software? PLEASE?????
there are two stickies at the top of this forum, one has unofficial new drivers for the Master card, and another has new test MSIPVS
if you don't feel that brave, then the original drivers and software can be found on the TV@nywhere Download page on the MSI website. however i suggest you still at least use the unofficial drivers as they fix several common issues.
and if you can't remember the serial key for the MSIPVS software (handily printed on CD), MSI PVS install requires serial number
good luck! -
Tv@nywhere Master Blue Screaning
Ok, got the Tv@nywhere Master a couple of weeks ago ad have had a blue screen error with it ever since. When shutting down/restarting/hibernating Windows just goes into a blue screen. The error says:
"IRQ_NOT_EQUAL_TOO_OR_LESS" or some sort. The error is pinpointed at the file: "cx88aud.sys". This problem is being caused by the TvAnywhere card. I have downloaded and installed the newest drivers and on my first restart it worked fine but when I went to restart or shut down this box it just started to blue screen again with the error.
I have searched through the Microsoft site and have came back with nothing that could fix the problem with a windows patch. The newest drivers dont seem to make a differance at all either. Has anyone else got this problem and/or know of a way to fix it.
Im running 2200xp, MSI K6 Delta, 1 gig Ram aand Audigy and CMedia [onboard] sound cards on a Windows XP Pro box. If it helps.
* WintersI am also getting BSD when I run a program called Video Studio version 8.0. I didn't have this problem when I was running the onboard sound card, but when I upgraded to the Audigy 2 card, I get a BSD saying the CC88XBAR.sys has produced a page fault. I think it may be a conflict with the soundblaster drivers. Try removing you sound card and its drivers and try the TV@nywhere without it, just for troubleshooting. Good Luck
-
TV@nywhere master shutdown issue
Help
I bought a TV@nywhere Master card for my cousins pc recently, after installation of the card the PC (which is running Windows XP Professional) restarts everytime I want to shutdown. After much investigation it has occurred that it is the 'cx88aud.sys' file that is causing that problem, as when this driver is removed the system shuts down as normal but when the driver is reinstalled it fails to shutdown.
Anyone shed some light on this issue????I had it too ...
It`s a IRQ sharing problem.
Solutions :
1. Moving the card to another slot migth fix it ...
2. if your motherboard supports it enable APIC.
3. Just disable the Msi Sound Capture driver.
Maybe you are looking for
-
Configuring double invoice check for vendor invoices posted through FB60
Dear all Can anyone tell me how to configure double invoice check for vendor invoices posted through FB60. for miro documents..we can use Tcode OMRDC Is there any such tcode which can be used for configuring fi invoices for double checking.. regards
-
How do I re-arrange the tabs on the foxtab display?
I put sites into the favorites but later want to re-arrange the tabs.
-
I rented a movie from the iTunes Store and the download failed. I can't restart the download without error or rent other movies? Anyone have this problem and found a solution?
-
What version of Photoshop Elements came with the Epson V500 scanner?
What version of Photoshop Elements came with the Epson V500 scanner? Will Photoshop Elements 13 work with the Epson V500 on Windows XP and Windows 8?
-
I installed one software from a game and that insatlled one addon to mozilla firefox. Then all the google search engine results are changed to the advertisements. I was unable to uninstall/remove that addon. May I know how to do please?