TV@nywhere Master Recording Problems

The TV@nywhere Master works fine for viewing, but I can't record without problems. There is a sound problem with all available versions of WinDVR. The recorded sound regularly "warbles" or pulsates. It is detectable when a musical tone is playing, otherwise it may be hard to hear. It is very annoying once you pick up on it. Other interVideo programs WinProducer and WinDVD Recorder exhibit the same problem.
I tried PowerVCR and I get an error message when attempting to record in MPEG2:
S0009 : Unable to render preview video stream.
I have all the latest drivers and software versions. I even tried a clean install of Windows several times and a different sound card, but no luck. I'm getting nowhere with tech support. Very frustrating.
ASUS A7N8X Deluxe MB
Onboard nForce2 sound (also tried Soundblaster Audigy)
AMD 2800+ Barton CPU
512MB DDR RAM
GeForce 5600 Video Card
250 Gig Hard drive
Windows XP

Using PowerVCR II 3.0, and there is no Use Smart Tee option available.
Here's all the options:
Video -> Overlay Options -> Overlay/Non-Overlay (Non-overlay causes a crash)
Profiles
Check boxes for MMX, SSE, 3DNow and Enhanced 3DNow. All are checked.
Recording / Advanced -> Advanced Options
Video Smoothing (during recording) - unchecked
Intelligent Noise Removal (during recording) checked
Enable Time-Shifting when recording - unchecked
Have tried changing most of these settings but always get error message, unless I use MPEG1 which is not acceptable quality.
I did a search in Help for "Smart" and for "Tee" and there are no matches.

Similar Messages

Customer master record problem

Sir in tcode VA01 i a getting following error message
" No customer master record exist for sold to party 1"
Can u pleaase tell me what customization i will have to do ?
I wait online.

Hi,
In VA01 give sales area (salesorg,distchan and division), for example,
salesorg     1000
distchan     10
divisio        00
sold-to-oparty   1000
ship-ti-party      1000
order reason   = customer recomendation
and also give item and material you will get.
hope this will help you
regardes ,
Dhanush

TV@nywhere master. video problem

hi. i got the tv@nywhere card for my wife for xmas & it was working fine until recently when all of a sudden when recording a clip from the dvd/vcr & she goes to add it to the project she's working on it opens only as a mpeg sound clip??? all was fine, now this. i tried the uninstall/reinstall deal, with no luck. i got the updated driver via an e-mail from intervideo and again, no luck. i know my system can handle it. any help would be greatly appreciated. thanks. take care all
rick....
amd athlon xp 1700+
512mb sdram
40gig HD
radeon 9000 video

Patience Yuz this forum has no input from MSI so you have to wait until someone, somewhere else in the world is awake.
Regards to MSIPVS yes it is awful and there has been quite some discussion within this section of the forum and the survey section as to the problems with this software. It is not only MSIPVS that is at fault the drivers also need some work. On some PC`s MSIPVS causes crashes but by far the biggest complaint is the poor display. Also MSIPVS or the card/drivers not sure which, will not remember it`s locale, every time it is started it will go back to the default in my case it seams to be PAL_B and some times to NTSC my locale is the UK and the TV setting should be PAL_I but getting to stay on PAL_I is a big problem. It makes it hard to schedule a recording as it will probably start in the wrong format. I agrre with you that feeware software is better than MSIPVS.
Thanks to your previous post I can confirm that you have sorted the remote`s missing functions.
Now all we need to get the drivers and MSIPVS sorted.

TV@nywhere Master instalation problem

Hello,
I am new member and I need help. I have TV@anywhere Master card but I have trouble to install software MSI PVS. I download the latest sw and driver from the MSI site, but it still do not work. Problem is that I can not change Country (Slovak Republic) and Input type (Antenna/Cable). When I select them and push apply/ok button then setting change back to Afganistan and I can not tune any chanel. Can somebody help me, please.

I forget, I have red the collection of tips & tricks and I tried it, but it does not help, MSIPVS still Stuck-at-Afghanistan and antenna Please help.

Problem in Creation of Change Master Record in CC01 (ECM)

Hi folks,
me got a problem. whenever i create a Change Master Record using the transactuion code cc01, Change Master is generated but it is not updated to the database and instead throws up a dump error.
Regards,
maximus.

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem with the TV@nywhere Master's sound

Hi,
I have TV@nywhere Master.
The TV picture is OK, but the sound swithcing off after about 90 seconds of playing.
Then I change station and the sound is back. But after 90 seconds it switch off again.
etc.
Does someone know how to solve this problem.
Thank You,
Mike

dear Mike
I have the same problem. to the best of my judgement, this is hardware problem and you should contact the manufacturer for warranty coverage through your dealer.
omar

Problems in Vendor master record.

Hi Sdn Experts...Could you help me?
I have problems with vendor master record. I have vendors in duplicity....to solved this I aplly the solution by sap for make the consistency by Tax number. Now I cant insert the vendor with the same Tax Number...But appear other problem..I have a lot of vendor in duplicty befora i aplly the solution and i need to eliminate this vendors...
I execute the Transaction XK05 ( Block Vendor ) and XK06 (Mark Deletion Flag), but doesnt work...because if i make any modification in a vendor master correct the system show up the message..
''Vendor master record with the same tax number already exists''
There is other way to make the deletion the vendor record? How I solve this issue? Pleaaase help meee!
Take a look in the File
[http://www.easy-share.com/1903543315/vendor_problem.doc]
Thanks,

hi
u have to archive the vendors inOBR2 or the simple way is go to XK99 here give the list of the vendors and then change the description with * in mass
so description of all the duplicate vendors will be * and then flag them for deletion so they cant be used again
agin u can use them agin by changing the name by some other vendor so u can use the same vendor code for other vendor by just changing the description
regards
KI

Numerous Problems with New TV@nywhere Master

Greetings all. A few days ago, I purchased a TV@nywhere Master card. I own two MSI mainboards and an MSI video card that I think are great, but so far this product has been nothing but junk. I am having numerous problems with it that I have not been able to resolve:
1. The remote control just plain doesn't work.
2. I am unable to adjust the TV volume within the MSIPVR tuner software. Turning it up and down or muting it does nothing. However, whenever I exit the program, it mutes the line-in jack on my sound card and doesn't unmute it when I run the program again! I have to run the Creative Surround Mixer and unmute the jack before I get any TV audio.
3. Originally when I booted up, the radio tuner kicked in with a fuzzy feed, even though the software was not running. I had to run the software and exit it to make this stop. I believe this has resolved itself.
4. The MSIPVR software seems very unstable.
I have tried updating all the software from the official MSI drivers page and I also tried the unofficial releases of both the drivers and the MSIPVR 3.0 beta from this forum. The 3.0 beta build seems even more unstable (though it is a beta so this is understandable), but none of my other problems have been resolved either. I've perused the forums looking for ideas, but haven't found anything that's worked. I've also tried all these steps on two different systems that I have with the same results.
I'm really shocked that MSI would release such a low-quality product as most of their other things are quite well made. I am looking to see if anyone has suggestions I can try to resolve this. I am interested in keeping this card if these can be fixed, but if not, I'll be returning this unit and picking up something from ATI instead. There's absolutely no reason for a card to be runnign this poorly and be in a shipping state.
Below are my system specifications should they be of any help:
AthlonXP 2800+ FSB333
MSI K7N2 Delta-L nForce 2
1024MB PQI PC3700 LL
Sound Blaster Audigy
ATI RADEON 9600XT
Promise FastTrak TX2000
2x40GB Western Digital 8MB (In RAID 0 Stripe)
Windows XP Professional Service Pack 2
All Latest Drivers/Updates for Windows and All Hardware

Quote from: TunerFAQ on 17-February-05, 10:17:47
One more note (great stuff Stu:))... with regards to the remote... try to give it a slight extra push into the socket :D.
As stupid as it sounds, it happens :p... at least with me it did. I kept on trying to get the remote to work in the beginning, only to find out in the end that I hadn't played it ALL the way into the input socket. After the click, it worked.
I hope you can get the sound stuff working though. That's definitely a pain :(. I'm personally having issues with the original card and new software now... but yeah, I shall wait on your feedback first:).
OK, I've finally had some time to try out the various other suggestions that have been made and unfortunately, have met with no success. I tried changing my audio to CD In on my Audigy which still has the same sound problems. I also checked out the connection with the remote and it is in all the way. Still no go on that one. My power supply ratings are:
+5V: 35A Maximum/0A Minimum
+12V: 24A Maximum/0.8A Minimum
+3.3V: 28A Maximum/0A Minimum
-5V: 0.5A Maximum/0A Minimum
-12V: 1.0A Maximum/0A Minimum
+5V SB: 2.0A Maximum/0A Minimum
At this point, I'm pretty much at my wits end. If anyone has other ideas, I can entertain them, but tomorrow if I don't have this up, I'll be taking it back. This card is demonstrating itself as just poorly designed and built. Thanks for your help all!

TV@nywhere Master problems

I recently purchased TV@nywhere Master to use on my Dell Dimension 4550 which runs WinXP, and would like help with the following issues:
•   The signal for the TV card is provided by an antenna however, it is not strong enough to reach the tuner’s threshold, so none of my channels show as available in SETUP. I have already downloaded and installed the three latest driver versions from the MSI website. Do you have any suggestions as to how I can remedy this situation? The same antenna provides the signal to our two TVs, and our reception is perfect.
•   I have twice attempted to register this card on your website, and have been told both times that my sessions, which took about a minute, had timed out! Can you fix this, please?
•   The radio comes on unbidden whenever I start my computer, and after it comes out of standby mode.

I have a TV@nywhere master and I live in the UK.
I do not have any problems with tuning the stations with MSIPVS. All 4 main channels work fine, it also tuned in to some weaker signals. The only terrestrial channel I can not get is channel 5 but that is because they is no channel 5 by aerial in my area.
You could try fine tuning the channel that BBC2 is on, it may help, how to do it is in the manual.
The drivers on MSI web site are not for the master (MS-8606) version they are for the original TV@nywhere and the TV@nywhere Master drivers are the same version number as the one on the website but have probably been tweaked to accommodate the new Microtune MT2050 tuner.
The only gripe I have about the MS-8606 is the drivers for the tuner. They do work BUT if you want to use any other software that works with the new CX2883 and MT2050 chips, you have to run MSIPVS first to get the tuner to work. The display within MSIPVS also leaves a lot to be desired especially after using Dscaler (no tuner - video-in only). Video-in is not a problem and works with most well know freeware/shareware software. The capture quality (which is my main concern) is excellent when using the higher setting. I have captured some footage of an holiday video that was transfered to an very high quality VHS tape nearly 12 years ago, and converted it to an SVCD. The quality of the end results is as good as the original VHS tape. I have also capture from the Tuner in DVD quality and it is almost undistinguishable from a real DVD`s play back and certainly better than some cheapo DVDs.
As the Tuner and encode/decoding chips are very new (product only released 3-4 weeks ago) support and new drivers will take time to appear, BUT even without the support etc. I can still see the quality that this card as to offer.

Sound problems with CNBC and E4 with TV @nywhere Master

Got the TV @nywhere Master card, had no problems with tuning in the cable stations picked up all the channels, but E4 and CNBC have no sound just a anoying clicking sound. Have updated the drivers and software, tried the card with Windows 2000 SP4, and XP pro SP1, tried both internal & external audio connections, nothing makes a difference. Anyone got any idea's?

I bought and installed a TV@nywhere Master yesterday (18June03) and no sound problems at all. The Radio volume control definitely controls the line in volume, but check that the mixer Volume Control is not being muted. My Sound in via on-board sound 6 channel Realtek ACL650.
I have been generally very pleased with the results but have yet to get the remote to do anything, I have WinXP SP1 with all updates installed. Not sure if it is my System set-up or faulty remote but it a minor concern for me.
I would suggest that you take a look at VirtualVCR (freeware) for your capturing if you want more that Mpeg files. It works very well for me and allows me to capture using the frame size and codec of my choosing

MS8606 TV@nywhere Master PROBLEM!

I need to fix this.. so please, someone, help... give me some advice
There is a problem when switching channels on the TV@nywhere Master. After a few switched channels the computer hangs and the only way to "continue" working is to reset the computer... I think it has somethnig to do with the sound cause computer hangs mostly on the channels that have a diffrernet sound then mono...
and the comp is
865pe neo2-pfs
PIV S478 3.0Ghz/800/512
MS8911 FX5600 XT - TD256
and the "great"
MS8606 TV@nywhere Master
You see... if the computer is mine I would open it and smash the TV@nywhere Master with a hammer in a thousand pieces... but it is a comp. of my girlfiend and concidering what it is really it is so stupid that she can not watch the TV...
Give me some advice...
p.s. i have tried with the "new" drivers...

HI Guy's
I recently got a MSI MS8606 TV@nywhere Master and had the same problem as the guy's above with MSN messager sound and tv channels ect and It's seems that these problems I know it sounds crazy but if you have Power DVD 4 or older than uninstall that first then load up your MSI software using the latest apps and drivers on the MSI site and not the stuff on the CD ecexpt for MSI radio which works better than the latest one and All should be fine
and oh Hyperthreading works just fine! if you haven't noticed than when you turn off Hyperthreading the CPU temp goes up by 4 to 5 C and YES PowerDVD 5 works but load that up after the MSI software.
Hope that helps

TV@nywhere Master Plus AVI recording

Anyone tried recording AVI (with Huffyuv codec for example) with the new TV@nywhere Master Plus?
I'm only interested in recording in "raw" AVI since I want the best quality and editing possibilities.
Since my TV@nywhere Master crashed I want to have another one and the follower seems to be what I want.
I bought a Hauppauge Win TV PCI but it's not as sharp as the MSI card was, though the material sharps up nice in VirtualDub during post-processing with it's filters.
Also the colors are a little bit dampened in comparison to the bright colors that the MSI card delivered, and this is probably also why the Hauppauge feels a little bit more natural in that area.
But most of all I miss the sharpness the MSI card delivered.

Using PowerVCR II 3.0, and there is no Use Smart Tee option available.
Here's all the options:
Video -> Overlay Options -> Overlay/Non-Overlay (Non-overlay causes a crash)
Profiles
Check boxes for MMX, SSE, 3DNow and Enhanced 3DNow. All are checked.
Recording / Advanced -> Advanced Options
Video Smoothing (during recording) - unchecked
Intelligent Noise Removal (during recording) checked
Enable Time-Shifting when recording - unchecked
Have tried changing most of these settings but always get error message, unless I use MPEG1 which is not acceptable quality.
I did a search in Help for "Smart" and for "Tee" and there are no matches.

See my problem no master record move to next record

hi master
sir
i have master detail block master table have all data but detail no data i need feed data in detail then i goto in detail block write value and press F10 for save
for new record in detail
in detail blick post-block or post_record or post_insert event i write this code
go_block('masterblock');
next_record;
go_item('detailblock.item');
but not responses no master block move to next record still and my curser sitll in last postion
sir how i move master record after save the detail record and jump to detail block for new record
please give me idea or code
thanking you
aamir

thank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir

Facing Problem in creation on Customer Master Record with reference

Dear SAP Experts,
I am making a New Customer master record with referenec to existing one. Account Group """ Stock Transfer - Depot""" do not use internal no assignment, we put external no to customer code. but when we enter the customer master with reference to existing one, system shows the error.....enter a no between A001 and Z999.
Customer Record Details-
Account Group - Stock Transfer Depot
Customer - 1101
Compnay Code- 1000
Sales Organisation - 1000
Distribution Channel -20
Division - 01
Reference:
Customer - 2001
Comapny Code - 2000
Sales Organisation - 2000
Distribution Channel - 20
Division - 01
Error: ENTER A NO BETWEEN A001 AND Z999
I m not getting why system showing this type of error, should i need to configure new customer code sumwhere in IMG if yes please let me know.
Lokking forward for your quick response on the same.
Regards
Parul Deshwal

Hi Parul Deshwal,
- The number range is created in XDN1.
- The number range is assigned to the account group "Stock Transfer - Depot" in SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Assign Number Ranges to Customer Account Groups
Remember - If you are entering an external number it generally means the number is created in an external system and replicated to your system.
Help - Check what external number was used last by doing SE16 on table KNA1 and use the account group "Stock Transfer - Depot" as a selection parameter.
Best regards,
Glynn

MSI TV@nywhere MASTER PCI TV Tuner card FAQ

So you’ve just decided to add a MSI TV@nywhere Master card to your PC, you’re gonna need some help installing it then!! Before you continue, I recommend you download the Unofficial New Drivers in the other sticky, to avoid any heart (and brain!) ache.
For best results also, you should be running at least DirectX 8.1. This is included on the driver CD, or you can download the latest version from Microsoft's DirectX Page. If you have a P4 which supports Hyperthreading, you will also need at least Windows XP SP2, otherwise you will have to disable hyperthreading in BIOS.
You should also be in the habit of having the latest drivers for your video card, audio card and motherboard chipset; this can also avoid any future TV software failure. And make sure you regularly run Windows Update (or use the Automatic Update feature) to keep your Windows clean and up-to-date. And also remember when installing new drivers or software, if the installer suggests you restart the computer then do so, before you install anything else! Drivers not installing correctly are common causes of problems, especially with this card!
INSTALLING THE HARDWARE
I’m presuming you’re familiar with the concepts of building and upgrading PCs, so I won’t go into too much detail on obvious stuff (like “remove the side panel of your case, locate a free PCI slot…”).
Fit the TV@nywhere Master card into a free PCI slot. If you didn’t get one with it, you’ll need a CD-audio lead from somewhere (the thin grey lead). If you have one connected between your CD drive and your soundcard CD-Audio In connector, then use that, any version of Windows after 98 supports digital audio extraction, so it is not needed there now. Connect one end of the audio lead to the 4 pin header on the TV@nywhere card and the other to the AUX input on your soundcard (or motherboard if using onboard). If you are installing the Mega TV Tuner in a Mega series barebones, connect it to the TV audio input on the mainboard to the rear. Don’t worry about using the 3.5mm jack plug lead to connect tv card audio, we don’t need it now, doing it this way.
CONNECTING YOUR TV SIGNAL
Depending on your global location, this may vary. Either way you need to connect either a aerial (ANTENNA) or cable (CABLE) to the CATV connector on the card. Someone will no doubt clarify this for me, but cable is for US-type cable, which doesn’t need a decoder box. Most people will be using the Antenna I’m guessing. Your choice of CABLE or ANTENNA needs to be remembered, you’ll need this later.
You will not be able (or have limited success) in connecting a video recorder or set-top box to the CATV connector. Instead you will need to use the Composite or S-Video connector, and connect the audio source either directly to the soundcard or to the Line-in on the TV card.
INSTALLING THE DRIVER
Don’t use the driver on the CD. Download the latest driver from the MSI download page. If you are a Mega series user, make sure that Windows has been installed onto the C: drive. If not you’ll have to reinstall, and disable the USB controller in BIOS to prevent the card readers becoming the C: and D: drives. This also causes problems later.
I would advise temporarily disabling any anti-virus programs at this point, to avoid any complications.
When you start up after first installing the card, cancel any Found New Hardware wizards that appear. OK, so extract the contents of the downloaded ZIP, and run the PVSSetup.exe file to install the drivers. Once this is complete, RESTART your PC and the drivers will be installed for the new hardware found.
Check in Device Manager, there should be four new hardware listed under Sound, Video and Game Controllers related to MS8606. If you see any with the (?) next to them, you might need to try the card in another slot.
INSTALLING THE MSIPVS TV SOFTWARE
If you wish to use other TV recording software other than MSIPVS then please feel free to do so.
MSI do not make their own software. At least not all the time. MSIPVS is a rebranded version of Intervideo’s WinDVR software, with extra features added such as network streaming for TV@nywhere. Some people love it. Lots of people hate it. Generally most people who have posted here hate it. People who love it tend not to post if they don't have problems. The people that hate it generally mess initial settings up, which can cause problems when they try to change it. The more patient of us will always get it eventually right!
Install the MSIPVS software. Easy as that. Its setting it up correctly that’s the tricky part. Listed below are the main things to look for when performing initial setup. If you are unsure about anything else then read the manual! Only a complete genius would dare install any unfamiliar hardware without having the manual handy for reference - how do you suppose I learnt anything?
Device
Video Input:
"Device" is always the Conexant Cx2388x Video Capture"
"Source" - select TV if you are connecting your signal to the CATV connector (antenna or cable), select S-Video or Composite if using these instead
"Standard" - set this to your local TV standard, eg if in UK set to "PAL-I". if unsure, do a Google search and find out!!
If you don't set these correctly you won't receive any channels and/or they will appear incorrectly.
Audio Input:
"Device" will be your soundcard or onboard audio device
"Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.
TV
Tuner:
"Input" will be Antenna if you have an aerial connected, or Cable if you are connected to unencoded cable TV.
"Country or Region" - if need to explain this one then maybe you shouldn't have this card!
Channel
Now we will see if your settings and TV signal are good! Tick the Freescan box, and then click on Autoscan. This may take a while, and for a short time it may appear that the program is doing nothing. Patience! It will soon start, and then pick up any available channels it can find.
Make sure you have a good strong signal if you are using an aerial, otherwise TV@nywhere won’t pick up as many channels. UK viewers – just using a simple set-top aerial and signal booster, I could even receive Channel Five (or “five” as it is known now!)
So at this point now, if all has gone well, you should be able to watch and record TV on your PC! If it hasn't...

"I've lost my CDs and MSIPVS needs a serial number to install!"
MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!
"When installing MSIPVS, the program hangs then shows a message saying "remote procedure call failed" "
If you are a Mega user, you have installed Windows onto a partition other than C:. You will need to reinstall Windows, making sure you disable USB controller in BIOS, so that the card readers do not take up C: and D: drives. Upon first restart (after Windows has created partition), you may re-enter BIOS and enable USB controller before Windows continues installing itself.
"MSIPVS installs, but when I start the application I get an error message "WinDVR has caused a problem and needs to shutdown" "
hpkuo credits this to sizzle in his hints and tips thread, but I'll elaborate a little. The problem is caused by QuickTime codecs installed by Nero 6.3.1.15. It is unclear whether later versions of Nero were fixed, but earlier versions should be okay. "A "quick fix" is to rename the files "NeQTADec.ax" and "NeQTVDec.ax" in "C:\Program Files\Common Files\Ahead\DSFilter\"."
Another alternative suggestion is to uninstall the codecs from the registry. I found this solution in another forum for another TV card with same problem:
Go to Start > Run (or press Windows key + R) and enter:
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTADec.ax"
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTVDec.ax"
The only consequence seems to be that Nero Vision can’t decode Apple Quick time format after this (something I can live with)
If you do require QuickTime codecs to be installed, there is the Quicktime alternative available from here: http://www.free-codecs.com/download/QuickTime_Alternative.htm . Or you could just use an earlier version of Nero.
PS if you are using a non-english setup of Windows, then the above paths will relate to how windows translates on your PC - ie subsitute Program Files etc for your local translation
"I have connected the external audio lead to the Line-In (blue) jack on my mobo, and set it correctly in MSIPVS, but I hear no TV sound"
If your mobo supports 5.1 speakers but only has three jacks on rear, the Line-in and Mic jacks have been configured to act as Rear Speaker and Center/Sub outputs. If you have only two speakers, they should be connected to the green Front Speaker jack. You will need to go into your audio hardware's configuration panel / Windows Audio Device Properties to correctly configure the rear jacks.
The other alternative is to use the internal audio connector - simply use a CD-audio lead to connect it to the AUX or CD internal connector on your mobo or soundcard. CD audio leads (the analog grey lead from your CD drive to the soundcard / mobo CD audio connector) are redundant now, as Windows now uses digital audio extraction through IDE channel. Make sure you set the audio signal correctly in MSIPVS to match this.
"When I start up Windows I can hear a hissing like "static" / the radio is playing"
One issue that was fixed in the latest Drivers; if that still doesn't work then the Radio volume is not muted at Windows startup. I'll let hschroed take over here:
"Both MSI Radio and MSI PVS, unmute the TV card at program start, and mute the TV card at SUCCESSFUL program exit (remember we are not talking about the soundcard mixer state here). What this means is as long as a single program start and a single SUCCESSFUL program exit takes place, the TV card tuner will be muted, regardless of what the soundcard mixer audio source states are. If the PC is rebooted (without a PC power-off), for whatever reason, while the MSI Radio or MSI PVS program is executing (a successful exit has not been performed), the TV card will remain in an unmuted state until the next startup and successful exit of either of the two programs.
The TV card mute/unmute status is carried over a reboot without PC power off. What this means is that after a PC power on, once the TV card has been properly muted by a start and successful exit of the MSI program, the TV card mute/unmute status should be in proper synchronization with the applications (regardless of the soundcard mixer status), as long as the PC is not powered off. (Romulus mentions computer coming out of standby. I did not test that scenario but I would expect that if going into standby means power is stopped to TV card, the effect would be similar to a PC power off)."
"My regular TV receives all 5 channels (even Channel Five!), but when I connect aerial to TV@nywhere I only get 3"
Common to all TV tuner hardware (not just MSI's!) is the need for a good strong signal. A moderate signal might appear okay on a regular domestic TV, but might not be strong enough for the TV tuner hardware. Consider investing in a good signal booster, or getting your aerial changed.
Consequently, I have also learned today that TOO strong a signal is bad for TV tuner cards, as soon as I know more I'll let you know...
"I have connected my VCR to the CATV connector, but it does not appear when autoscanning."
"I cannot receive any channels when I connect my Sky box to the RF (CATV) connector."
Thanks to a wonderful technology called "Macrovision" protection, many VCRs and satellite/cable boxes won't work in this way by connecting them using their RF output. Anyone who gets a result is very lucky. There's always the Composite and S-Video In connectors to try. But either way, the TV@nywhere card won't scan all their channels, you'll still have to change them manually.
"Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
"MSIPVS keeps defaulting my location back to Afghanistan, even though I set it to US / UK/ Sweden / Latvia / Kazahkstan"
You will need to reinstall the drivers and software due to a glitch. Uninstall MSIPVS and the tuner drivers (with its PVSSetup.exe setup program) then restart your PC, and ignore the Found New Hardware wizard. Install the tuner drivers with the PVSSetup.exe program, then restart your PC. Then install MSIPVS, restart your PC and you're good to go again!
"Where can I find these "Unofficial New Drivers" that people keep referring to here?"
The "Unofficial New (BETA) Drivers" became obsolete when MSI officially released them. You can find them on the Product Support page for this card, as they are now the latest drivers. MSI TV@nywhere Master product page
[Last edited 8th October 05 by Dr Stu]

TV@nywhere Master Recording Problems

Similar Messages

Maybe you are looking for