Tv @nywhere Master w/ Vista Ultimate Driver help

I have Tv @nywhere Master and when i try to install the 'certified for windows vista drivers', it wont let me. I open up the rar file and then i click on setup and click next and then next and then an error pops up and it says 'system cannot detect the device on your computer, please make sure the device is connected properly'. I have tried taking it out of my desktop and putting it back in, ive tried uninstalling all of the drivers and reinstalling them, and ive tried opening up the driver folder and opening x86 folder and clicking on SetupDrv.exe and i get the same error... when i open up the setup on the x64 folder, i get an error that says "the version of this file is not compatible with the version of windows you're running. Check your computer's system information to see weather you need an x86(32-bit) or x64(64-bit) version of the program, and then contact the software publisher." I think i have tried just about everything... Any help is much appreciated...
My computer specs are...
amd athalon 64X2 Dual core processor 4800+,
3 Gig Ram
Nvidia GeForce 6150 SE Graphics
Windows Vista Ultimate
320 GB hard drive...

Where did you get Vista drivers for TV@nywhere Master? Are you sure you're referring to the right product? MSI discontinued the Master card long before Vista was available, and they are certainly not listed on their website:
http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=638
Of course, some might argue that the Master drivers never worked properly under XP, but thats another subject
My honest advice, if you really do have the TV@nywhere Master is to ditch it, and buy a newer card, which does have Vista support.

Similar Messages

Transfering NTSC VHS using TV @nywhere Master....Plz Help!

Hi!
Im trying to transfer NTSC VHS using Philips VR422 VHS Video Recorder. This is able to play NTSC VHS Video's normally on any TV.
But When I use TV @nywhere Master it doesnt display properly and I only get it in black and while and the display sometimes has a bar at the top and/or bottom usually flickering displaying a previous part of the recording.
Now I have used the Coax/Phono(RCA)/S-Video inputs from the Coax source and the both scart connecters (ex1 & 2) using a scart coverter connector and still have the same problem.
Now I live in the UK and obviously here it's PAL-I but i have tried from setup/installation both NTSC (& NTSC-M) and PAL-I and still get it in black and white!, ive tried changing these after installation with no joy!, I have used the original drivers and have the latest WDM drivers and PVR1 & 3 downloaded from the MSI website.
I have no probs with the sound coming in through L/R Phono's to 3.5mm using the Line-In.
Does anyone know how to get this setup so it players normally through the TV @nywhere Master or could someone help me in finding either a DVD recorder that can do it or a service (local to Birmingham,UK) which i can use as I need to get these done ASAP!!... HELP!!!

unfortunately there are two versions of TV@nywhere Master; if you have the PAL one (for Europe) then it won't work with NTSC signals (or vice-versa)

**NEED HELP** Audio driver for DV5220US/VISTA ULTIMATE SP1

I have been pulling my hair out for three days i have tried numerous drivers and to no avail I cannot get my ALTEC LANSING SPEAKERS to work on m
DV5220US Notebook. I have just installed Vista Ultimate w/sp1 . The specs state I have Sound card/Sound blaster pro as my audio card.
Will someone please be so kind to give me a driver that supports this notebook.
In the device manager it shows High definition audio device with exclamation.
Thanks in advance
Chris

Download the Softpaq SP33443.exe (drivers for XP). Works fine.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&lc=en&dlc=pl&cc=pl&...

Satellite A200-13O: Help in installing Vista Ultimate from Basic

I need help in installing Windows Vista Ultimate in my A200-13O.
My current operating system is Windows Vista Basic and I want to upgrade it to Windows Vista Ultimate.
Based on the driver download section I need the following drivers to be installed.
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221
I have already downloaded most of them but I can't find some like [2] Intel ICH7M Chipset Utility, [11] Intel Kedron Wireless LAN Driver, [23] TOSHIBA Speech System. Also some of the drivers are not installing properly.
Can you please help me out.

The chipset driver you can get on the Intel webiste
www.intel.com
But I think the driver could also be in the display driver because its the same chip.
The WLAN driver I have found on the Toshiba website so download and install it.
The speech system could be integrated in the sound driver.
But download and install all drivers and the system will work.

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Vista ultimate and audigy se... help for dri

?I have Audigy LS (SE) and Windows Vista Ultimate 32-bit...[color="#ff0000" face="Verdana" size="3">?i use last drivers "Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit Windows Vista Driver .04.0065 (0.54 MB) "? but it always give the same error ... helpppp[color="#222222" size="4">?[img"]http://img404.imageshack.us/img404/2492/creativeqd7.jpg">

nobody help!!!

Acrobat 7.0 Pro error message in Vista Ultimate..missing printer driver

I use to have Adobe Acrobat 7.0 Professional installed on my other computer with had XP Pro as its operating system. I could convert any Word 2003 document into a PDF and e-mail it without any problems. I just purchased a new computer with Vista Ultimate 64 bit and every time I try to convert a Word document into a PDF I get an error message that says it can't find the printer driver and to please re-install Acrobat. I did what it said and I keep getting the same error message. I even installed the newest Adobe Reader like it said. I know my printer driver works. Does anyone have a solution? It seems all the money you spend on Adobe products their support staff just wants to wash their hands and send you on some wild goose chase looking for answers on their un-user friendly site instead of answering the question or making any recommendations. If I have to update it so be it. They should have told me that. This is the last time I will fork over $600 on any of their products because their service stinks. I appreciate any help from anyone who has experienced this same problem or who knows how to rectify it. God Bless, Tony

Hi Michael, Thank you so much for the reply. You would think Adobe Support could have told me that so I really appreciate it. Do you know what I need to do to upgrade it ? Can I find an upgrade on E-Bay or do I need to go to COMP USA or some other place to buy the upgrade? Last, what exactly am I looking for to upgrade it to the newest version. (Name of product). I will also remove the other program so it won't have any other issues once I get the upgrade. Thanks again and God Bless, Tony

Need help with upgrade from WXP MCE to Vista Ultimate on Qosmio G30 - 175

Hi all, I tried searching for the following issue to no avail so I would be most grateful if someone could help and point me in the right direction:
Tried to upgrade the XP to Ultimate and it got to unpacking stage and BSOD "Session3_initialization_failed (xxx STOP: 0x0000006F (0xC000009D, 0x00000000, 0x00000000, 0x00000000) appeared repeatedly. I tried again and the same happened.
I have already updated the BIOS and stripped the conflicts out of the Toshiba suite of programmes and the update advisor gave the OK on several ocassions before attempting this exercise.
Help.........Dave

Forgot to mention too that I am currently running with 2 x 2GB Ram and no additional hardware or software has been added prior to attempting the upgrade. The medium I am using to upgrade is a recently purchased full retail version of 32 bit Vista Ultimate (which also includes a 64 bit version too in the box).
I have been in touch with Microsoft Support in recent days and they told me that my hard drive appears to be defective being the reason for the failed upgrade. Infact last week together with Microsoft on the phone we did attempt a clean install but that just lead to me having to abort the clean install and rescue my laptop back to original XP MCE.....flipping heck!!!!!

Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Hello,
I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
Thanks in advance.

Hi
To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
Hope that helps.
Regards
Phil

T61p + Vista ultimate = Will not let applications access internet. Please help

Hey all, new here. However, I've owned an R40 IBM Thinkpad before I've upgraded to this T61p for college. I absolutely LOVE this laptop, apart from the issue I am experiencing at hand.
My system specs, incase it is of concern
Windows Vista Ultimate 32bit
4GB RAM
200GB 7200RPM (encrypted) drive
Nvidia 570m GPU
Intel T9300 2.5 ghz 6mb L2 cache
here's what I'm going through...
All sorts of applications that require access to the net are getting hung up, and idicating that they cannot connect to the server's they are pointed to for updates. Examples include, AVG antivirus, Punkbuster (Anti-cheat software that runs in the background of online games...always updating) and these are the only apps I have that require internet access so far.
I can browse using Firefox and Internet Explorer no problem.
The punkbuster is especially frustrating because just about ALL games and ALL servers use it, and if punkbuster doesn't update, you get kicked out of the game.
I am convinced it is Vista as I've never had the sort of problem with XP, and it is two different applications experiencing the problem.
I am accessing wireless through a router with the necessary ports I need open for this software, and I am running Comodo Firewall in learning mode. However, even if I disable Comodo altogether i get the same symptoms.
Any help would be much appreciated

OK, two things:
ON your BlackBerry, go to Options > Advanced > Browser.
Set that to HOTSPOT and save.
Now, connected to a WiFi router, open the internet browser on the BlackBerry try going to mobile.blackberry.com
Does it work?
Also, Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the mobile network internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Rescue Vista Ultimate SP1 64 bit Bootcamp Installation as Hard Drive Fails

I have been using a Bootcamp installation of Vista Ultimate SP1 64-bit retail since May 2008 without a problem. Vista was installed (accidentally) on two drives, both of which are separate from the two Mac OS drives. I would have preferred to install it on only one drive, and thought that I had done so.
All my Windows documents and programs are on Drive C (Bay 2), which appears as a Master Boot Record Partition in Disk Utility. Drive D (Bay 3) contains some of the Vista files (including the Boot directory and bootmgr), but nothing else, and appears as a GUID Partition Table in Disk Utility.
I have now begun to receive an S.M.A.R.T. warning that Disk D is failing. It was backed up last week before the warning to a Windows Home Server, but no longer backs up. I would like to replace Drive D with a brand new drive, but know from past experience that Vista will not boot if I simply remove Drive D. Aside from the Vista boot content, there is nothing on drive D that I need.
How should I best proceed to avoid losing programs/data on drive C when replacing drive D? Should I remove drive D, and try to boot from the Vista Ultimate SP1 retail CD to "repair" drive C? Is there some other approach that would avoid having to start from scratch with a new Vista installation?
Starting from scratch is very unattractive. The initial installation of Vista was a difficult chore that involved "cleaning" the brand new hard disk from the Vista CD (with Microsoft support), since it would not install on the Bootcamp-formatted drive. In addition, Drive C has software and documents that I use regularly and would rather not have to recreate.
Many thanks in advance for your suggestions.

So you do have at least one good backup. And you have used Vista file and PC backup as well, so you could do a restore if needed?
Whatever you do, I would pull all your drives and drop in one or two fresh drives.
I've never felt comfortable or safe with Acronis - doesn't support GPT.
Prosoft DataBackupPC 1.0 - used to use for backups but never did a restore.
Paragon HD Manager 2009 - seems to have a lot of tools but someone said it doesn't yet have full Mac and Boot Camp support.
My system is Vista and Windows 7 on one drive, data and such on #2 and multiple backup drives - one internal and a couple hot swap external.
SMART is not very good at predicting and you are at the point where what? I/O errors? bad or weak sector(s)? have you ever used the disk check to repair files and attempt to fix any bad blocks?
Depending on the make of the drive, you want to use the vendor's utility - often before even using a drive - to do a full surface scan and repair.
I remember when you had trouble installing.
Oh, and I would make a new backup. Even if it means pulling your OS X drive and dropping a new drive in there, and make it a backup of programs, files, documents, whatever, and maybe a system image backup.
Can you restore from the server? while booted from Vista DVD?
I have a somewhat similar problem with a drive "D" with nothing on it now that is "owned" by Vista that I want to get rid of and strip so I can use it for backup or something else.... but afraid to.

Premiere Pro CS4 eats my C: drive in Vista Ultimate 64-bit SP1

I installed Premiere Pro CS4 this last weekend 11-12 April 2009.
I have a Quadcore 3.0GHz with 8Gb of RAM, a 150Gb C: drive fo rthe op sys Vista Ultimate 64-bit SP1 and programs, a 500Go D: drive for general data and a K: drive 2Tb RAID0 volume useable about 1.8Gb.
My C: drive was healthy after installation of Premiere Pro with tens of gigabytes free at least. Then I started experimenting with building projects. I put my files on a mix of the D: and K: drives especially the AVCHD video assets on the K:.
While importing these AVCHD assets I eventually got a message from Vista that the C: drive was full and I did a clean up and that gave approximetely 30Gb free, I went back to importing, in a couple of hours the 30Gb was gone, this can only be Premiere Pro CS4 eating the C: drive and never returning what it takes. This of course is a disaster precisely because it is my op sys drive and Vista will periodically want to make new restore points especially before applying downloaded updates from Microsoft. I ahve run also chkdsk and defragmenter with no effect. I think Premiere Pro is using some sort of secret work files on the C: drive somewhere and that they just accumulate, of course this would be a bug.
Support Center does not appear to let me open web support issues even though we are in the 90-day bug fix period and I have registered the product with the product key so that is another bug that gets in the way of fixing the first.
Any ideas please?
Thanks!
Peter.

Yeah, I did not take backups that often cos I did not intend putting the machine onto the net, then I got this device that said it would protect against everything by isolating my machine and making it invisible, I await the analysis by the company but it does appear not to have worked, the only thing that works is very real physical isolation and do not use the internet at all from the main machine. Like I say it simply is not confirmed yet but neither is it denied. You cannot actually go so far as to blame Adobe because stopping hackers is the job of the op sys vendor really so I blame Microsoft, the only blame for Adobe is the policy that some functions require internet connection in order to work when they know internet is not secure, so for instance if you want to use the emulators for things like these mobile phones they want you to be connected, I tried that one phone emulator and it said so, I wish they just put all documentation and all software on the DVD. I can roll back to an earlier Vista version from a USB backup disk that is always powered off, then rebuild as necessary, but I want the security firm to see if it is a trojan in fact first and to see if it can upgrade the security device and provide a roll out of the trojan's work. Right now I am still scripting the documentary and this second quarter is getting this Premiere Pro up ready for third quarter production so I can be philosophical for now, but yes later I will get more disciplined. But at least now I (almost) know the security device is not the all singing wonder they said it was. Oh well. I use a second machine too, a PS3 with Linux, that is what I am using now, this one doesn't seem to get hacked even though it is my sacrificial machine.
Message du 16/04/09 14:21
De : "don solomon"
A : "JONES Peter"
Copie à :
Objet : Premiere Pro CS4 eats my C: drive in Vista Ultimate 64-bit SP1
Adobe deserves criticism for its shoddy QC, but not for maing you exposing your main machine at risk on the internet. I never do that, and I never have had a virus or malware on it--never in all the years I've been doing this. I have picked up a few on my internet machine, though, but they are easily fixed with the security scheme I use.
As for restore points possibly eating up disk space, which you alluded to earlieranother never for me. Restore points are a half assed measure at best. My security system is a full clone backup of my C drive starting the day I install and OS on it, and every time I add add a program, and every day when I am working a big complex project. Otherwise, once a week. It takes a few minutes only. That way I can restore everything in equally few minutes should anything bad happen, like poorly designed software affecting other software, a virus, malware, etc, and including drive failurewhich has happened twice over the years.
Don't get me wrong, a virus checker is very useful to a point, but real security design has to start long before you install one, especially if your machine is the heart of your business, as it is for me. What is that old saying? An ounce of prevention is worth..........
>

Need driver for Treo 755p for Windows Vista Ultimate x 64.

I am not able to find a driver for the treo 755p for Windows Vista Ultimate x64. Where can I find the driver?
Post relates to: Treo 755p (Verizon)

You can't you can only do bluetooth synchronization.
Take a look at the stickied thead above the hotsync board
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=17980
Any comments in regards to syncing via bluetooth should be directed there, there is no drivers and at this time there won't be.
I am locking this thread since this issue has been brought up several times here.
Post relates to: Centro (Sprint)
Message Edited by HardBeatZ on 07-26-2008 10:44 PM

No Wireless or Ethernet Driver After Installing Vista Ultimate on New Mac

After installing Vista Ultimate 32 bit on my 17" 2.6 GHz MacBook Pro (486 gb hard drive, 101 gb bootcamp partition), (4 gb ram) The Vista Installation has no Driver Listed (or connectivity) for either the Apple Wireless or Ethernet drivers.
Any thoughts?

Did you install the drivers from the computer's software install DVD?
Please post further questions regarding Boot Camp in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Lenovo 3000 N200 Laptop (0687-75B) has no DVD-RW drive detected under SATA in Vista Ultimate.

I use the Windows Vista Ultimate DVD (with Auto-activation) to install OS on the Lenovo 3000 N200 Laptop, however, no DVD-RW drive after successful OS installation. I have try both compatibility or AHCI mode but the same result occurs. (Both Windows updated and Lenovo update OK)
When I install Windows Ultimate with choosing internet activation, DVD-RW drive can be found.
Anybody has idea?

Hi Duck3,
Thankyou for the website. I actually went on this one: http://www.laptoprepair101.com/laptop/2006/02/22/troubleshoot-fix-laptop-video-problems/
Check out the Laptop LCD screen is solid white color example. This is what happens to my screen and sometimes the 2nd example happens also. I'm also thinking its the cable because whenever it does happen, I find that adjusting the position of the lid (opening the lid and closing the lid) fixes the problem. Also, one example on the other website said to try touch around the borders of the screen and see what happens - Touching around the borders does nothing.
I'm thinking cable.
I will try replace the cable after I buy new hinges and let you know how I go.
Thanks,
Dean.S
Lenovo 3000 N200 0687-A11: T5450(1.66GHz), 2GB RAM, 120GB 5400rpm HD, 14.1in 1280x800, Intel X3100, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 10/100 Ethernet, Fingerprint reader, Camera, 6c Li-Ion, Windows 7 Ultimate!

Tv @nywhere Master w/ Vista Ultimate Driver help

Similar Messages

Maybe you are looking for