TV@nywhere -- no sound when timeshifting

I just installed my card, and most of it works, although some of the channels are have really bad reception, and tuning is no help.
Anyway, the big problem I can't seem to solve is with pausing and timeshifting. Both work, but I get no sound on playback. I have notice that the software is muting my Line-in channel when I activate timeshifting. If I unmute it while buffering, I get sound on the buffered track, but I also hear double sounds. In any case, it is a pain to unmute the sound everytime I want to pause a show.
Anyone know of a fix, or a newever version of the drivers or software that fixes the problem?

I am very disappointed of this TV card.
And yes the latest patches provided by you have been installed. This is the main problems:
1) When opening InterVideo MSI PVS, the sound card (Creative Live) audio input sources are always changing (muting on/off) even if not related to InterVideo MSI option. So we always have to reset them to work (so when we schedule a recording the sound may not work or it opens the mic or mute the midi???). Example, we set the card to the input line in your software, when starting the software it may mute the input line and remove the mute on the mic. It's not always the same behavior, but always gives an erratic one.
2) Remote control only works half of the time. Cannot use the digits (0 to 9) to change a 2 digits channel (???).

Similar Messages

Help! I no longer have any sound when I try to use siri!

A couple days ago, I went to use Siri and you know how it makes the sound when you start it? No sound. I had the sound up high and everything. I can still ask things, but I get no reply back. I tried turning siri off, rebooting my phone, but still nothing. I restored it to factory setttings, and there is still no sound when I use Siri. Help?

See Here for Troubleshooting Siri,
http://support.apple.com/kb/TS4079
Check your Sound Settings... and Restrictions...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

5600 - No Sound when trying to capture analog video

Hi all, hope someone can help me on this one cause i have no clue here...
I try to capure from my analog camcorder, but I have no sound when connect the RCA or S-video video cable. The moment i disconnect the video cable the sound come back ....
I can capture audio without video or capture video without audio, but not at the same time !
Any feed back will be greatly appreciated.. thx in advance..

Well before someone could answer me i found a post here very similar to my problem....
https://forum-en.msi.com/index.php?threadid=27065&sid=&hilight=faulty+rca
Decided to test and the guilty was my rca cable...got a knew one and everything is just fine...
Hope this help someone else someday .. thx u all

In my iPad mini,when my use in app streaming , there is no sound.. Can anybody help? It used to be ok before. For example, there is no sound when I use YouTube clip in a news item or magazine like pulse..

nno sound when I use in app streaming

Hello Saranginotes,
After reviewing your post, I have located an article that can help with iOS audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mac Mini HDMI into AV HDMI Switch - Lose sound when monitor is shutoff

I'd like to use the Mac Mini to listen to internet radio and have the display shutoff. I have the Mini's HDMI output cable connected to Yamaha audio video home theater receiver that acts as a HDMI switch from various HDMI inputs (blue ray player, xbox, and mac mini). A single HDMI output from the av receiver goes to my Samsung flat screen TV.
All works well (I have the system preferences sound option set to hdmi on the Mini) until I shut off the TV. Then the sound that was going to the AV receiver shuts off and the mini switches its sound output back to its internal speaker.
Can't find a way around it. Appreciate an answer if anyone has one.
Reading the booklet that came with the Mini regarding HDMI output, it appears that Apple assumes that cable is going directly to a monitor. I'm wondering if the Mini gets a signal that monitor goes off (via the av receiver) the designers didn't factor the av receiver's capability to continue handling the sound.

When the TV is turned off or disconnected from the Mac, or if you are using an AV Receiver also when the AV Receiver is switched to a different source than the Mac, the result is that the Mac no longer sees a signal on the HDMI interface. The Mac will then deactive the HDMI interface and switch the sound back to the built-in speaker.
The best solution involves spending money, and is to buy a Gefen HDMI Detective+. This learns the signal from the TV and will keep sending it to the Mac even if the TV is turned off, unplugged or the AV Receiver switches the connection.
See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005

No sound when I connect my Macbook pro (2012) to TV via HDMI!

Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!

Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected.
I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor.

Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people.

Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people. I have tried to troubleshoot it, but can't find a answer.

Hey CEVYNBARRY!
Here is an article for you that will help you address this issue:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/ts1843
Take care, and thanks for visiting the Apple Support Communities.
-Braden

8230 Flip - want it to make a sound when I open it and close it.

This is purely a personalization question, but the last clamshell phone I owned was Windows-based and I was able to customize the sounds that it made when I opened it and closed it. Pretty minor and geeky, but I loved having it make the old school Star Trek communicator sound when I flipped it open..."Kirk here". This phone is light years ahead of my old Windows phone, so I figured it should have this feature. Does anyone know how to assign sounds to these actions?

Briansyddall wrote:
Make sure mute switch is not set to red on the side of ipad. Also in control panel make sure half moon is not on for donot disturb. Bsydd uk
Many thanks for your response.
MY problem is now solved.

How can I make a calender entry that makes a sound when it is its turn?

How can I make a calender entry that makes a sound when it is its turn?

Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

My ipad doesn't seem to make a sound when it is closed or in sleep mode to let me know there is an imessage until you see it on the screen that someone has imessaged. When you're taking it makes the swoosh sound, just not when it's in sleep mode. Help

Am having some problems with the sounds on my ipad, specifically my imessage notification sound when your ipad is in sleep mode and someone is messaging you. It seems to work with the swoosh sounds when you are actively messaging back and forth, but as soon as I close my ipad up and is locked or in sleep mode, I don't know anyone is messaging me until I look at my ipad. I've tried a few things.. But nothing has worked so far....Please help!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text?

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text? Even if my ringer is set to high, I don't want it to make a sound when it sends my texts..can anyone help?

Flip the Ring/Silent switch.

TV@nywhere -- no sound when timeshifting

Similar Messages

Maybe you are looking for