TV@nywhere Plus Cable problem

Hello folks...
I have recently gotten a TV@nywhere Plus card and installed it in my machine. It scans for channels and seems to find them, but the picture quality is terrible. However, If I choose antenna as the input it picks up the channels 2 to 12 and the picture is great! (I don't have an antenna connected, so the signal just is picked up out of the air) But, as soon as I choose the Cable input it sucks. I live in Canada and my machine is an AMD 1800+ with a MSI KT3 Ultra motherboard, 1 GB of RAM, a MSI FX 5500 viodeo card, Running XP Home with service pack 2 and all updates applied
Hope someone can help,
Nets

Lets start from the bottom and work up. Have you eliminated the cable & splitter hookup as the source of the problem by connecting to a TV? I had a problem similar to that when I first installed my TV@Plus and I had to remove/re-install the software and get a new cable & splitter before I could get it work.. No you don't need to use RG6. It does not hurt to have better but it's not a requirement.

Similar Messages

TV@nywhere Plus FM problem

I guys,
I have no problem using the TV tuner, image is ok, sound is ok, record is ok... but if I choose FM, I will get the interface but cant ear anything?
When you read the spec for the card, beside FM tuner you will see a (option)... How do I know if it is not an option on my card???
Thanks
Al

Ok, I do got static, my speaker sound was to low. I do ear static now, I uninstalled the driver and reboot my pc, then reinstall driver + reboot but same problem, just static.
I'm running Vista Ultimate Genuine (all updates done) over a MSI K7T266 Pro with 1.4G AMD Athlon, 1024MB, Sound Blaster Live 5.1, and of course TV@anywhere Plus card with latest Vista Driver and Vista Sofware.
Thanks

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

READ this: MSI TV @nywhere Plus + Dscaler

My Pinnacle pctv pro has gone ( I suspect overheating).
Used Dscaler for tv (ecxelent picture, ultra fast channel switchig) and VDub for recording (Huffyuv lossless codec).
It was super card. On differnt forums I read:this card is good, this card is peace of ....., but I think that every card is good as long it has good software.
Dscaler pulls maximum of the card out. For me is one of the best programs ewer written. :biggthumbsup:for the author !!
So I decided to buy something cheap. I bought MSI TV @nywhere Plus about 4 monthes ago.
Installation go smooth, MSI TVR works without problems, but TV picture was, like I ecxpected, not even close Dscalers.
After many ours, managed to work it with Dscaler 4.1.15.
Settings: Card Asus 7131D
Tuner Philips TDA8275
For each channel choose right Format ( for me Pal-B) and frequency.
Picture is on channels with good reception like watching DVD, but channel switch is a little bit slow ( the card is not directly supported).
Note - Dscaler is just for watching, for recording is original Msi Tvr more than good.
I had problem to use Dscaler and Msi tvr together ( Msi tvr reports error - list index out of bounds), but i solved it -
send shortcut C:\Program Files\MSI\TV@Anywhere Plus\TVR\MSITVR.exe to desktop and run it from there.
Remember - dont ecxpect miracles with MSI TV @nywhere Plus but for this money ( 3 x cheaper then was my pctv pro), must say that MSI TV @nywhere Plus is ecxellent card.
Hope, that I helped anyone with this.
Intel P4 3.0 Ghz BOX, 1Mb, 800M
Albatron PX865PE pro
2 x 512MB Ram
Radeon 9600 XT 256MB
MSI TV @nywhere Plus
Technisat SKYStar 2
120 Gig HDD SATA WD, 40 GIG ST, 160 gig USB2.0
LITE-ON DVD-RW
Taxan 21"
Windows XP SP2
.

glad you're enjoying it! i don't use my TV@nywhere Plus much, apart from to use it to play my Nintendo GameCube, but i think its an all round better solution than the TV@nywhere Master it replaced (as well as being much cheaper too). however, once you go down the Digital TV route, you'll never go back to analogue TV again

TV@nywhere Plus remote issue resolved!!!

I have been searching and reading many posts to fix my remote issue / not working problem. I have had a MSI TV@nywhere Plus TV tuner for like a year and the remote never worked. I don't know the exact model number of the tuner card. I know my driver for the TVR is 2.0.2.2. I have the software that has the PVR Plus. I had seen several posts that link the issue to running the Initervideo Cinema Manager which I ran and I still did have any luck. So I uninstalled Intervideo WinDVD (which I did and this did not resolve the issue either) I left this program uninstalled an I searched the CD for some info.
The CD I have has a version number on the bottom around the hole MSI_7131_V1.1.
I found a program called P3XRCtl.exe that has a icon of a remote in the path E:\PCI\TVUtility (this is on the CD). I copied this program to my desktop and then clicked on the icon. Guess what, it worked!!! All of the functions on the remote work. It seems as if when I installed the software that this remote software/utility did not get installed and does not run when the TVR program starts. So I then created a folder in my program files to place this exe file. The path I placed it is C:\Program Files\MSI\TV@Anywhere Utilities (I created the TV@Anywhere Utilities folder) The MSI folder now has 2 folders called TV@Anywhere Plus & TV@Anywhere Utilities. I still had a problem of the program not starting when I start the TVR program so I added the exe file to the Startup folder. To do this create a shortcut to the exe file and place this new shortcut in C:\Documents and Settings\All Users\Start Menu\Programs\Startup
This program will now start everytime the computer starts and the remote should work when the TVR program is started. I am running Win XP Pro...

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

My iPhone 4 is no longer recognised by my laptop, and no longer registers being plugged in to charge, even though it will charge slowly if plugged in and turned off. It's not a cable problem or a computer problem, as I've checked these.

Hey, over the past couple of days my iPhone 4 (GMS, Model A1332, EMC 380B - running on iOS 7.1.2) has begun inexplicably intermittently not recognizing being plugged in to charge or being connected to my laptop. As of today, it has complete stopped recognizing being plugged in to charge or connected to the laptop.
If I plug it in to charge, whilst it is on, nothing happens and the battery drains.
If I plug it in to charge and turn in off, it will charge very very slowly - though it will charge fully after a long time.
When I connect it to my laptop, nothing happens - it doesn't appear in iTunes, and it doesn't charge or recognize being connected to the laptop (there is no charging symbol, no noise from either phone or computer registering the connection as it usual did, or another sign of any connection between the devices, though, again, it will charge very slowly if turned off).
I've ruled out the possibility of it being a cable problem, by using a friend's cable and finding that didn't allow it to recognize being plugged into the wall to be charged either, or being plugged into the computer.
My friend's cable does work on their own iPhone (ie, when plugged into the wall with their cable, their iPhone acknowledges this and charges properly, and when plugged into my computer with their cable both my computer and their iPhone recognize the connection).
So, it's definitely a problem with my iPhone itself, but I don't know what.
As I say, it will charge very slowly, if it's switched off whilst it's plugged in, but it won't acknowledge being plugged in, and will only drain if it is turned on whilst being plugged in - and it will not recognize being connect to my computer.
Please help me figure out what is wrong with it, as this is beyond annoying and I'm literally banging my head against the wall - the iPhone is little over a year old.
Cheers.

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Thunderbolt display video died-Cable problem??

My TD (paired with a Retina) video seems to have lost its video. Audio working fine. Could this be a cable problem?

I can confirm that the Thunderbolt Display will work when plugged in to the 2011 MacBook Pro 15" and a 2011 Mac Mini Server connected via Apple's Thunderbolt cable. When both systems are connected to the monitor, the display will always prefer the system connected to its display port, when it sleeps or is powered down, the other system detects the available display and connects to it automatically. I can't imagine a more ideal sinerio!
Thank you Apple!
Jason
Nerds Limited

Solaris 8 says: "Link down, Cable Problem?"

I have these on my home LAN:
1. Sun Ultra 5 Solaris 8
2. Win 2000 PC
3. Win NT laptop
They are all hooked into a LinkSys Router.
The Router is hooked into my Motorala Cable Modem.
Here's the problem:
The PC and the laptop can see each other on the LAN.
The Solaris 8 is only visible on the Lan INTERMITTENTLY.
The lights on the Router for the PC and laptop are always ON.
When I reboot the Solaris box, the lights on the Router sometimes come ON, and sometimes they stay OFF. When they stay OFF, I see the message: "Link down, Cable Problem?" during reboot.
I have tried different cables, and tried various combinations of the 4 avalable ports on the back of my Router.
If I plug in the Sun box DIRECTLY into my cable modem, then I don't see the above message. (but then I don't have a LAN anymore)
Please help, I've been struggling with this for a while now.
Thanks,
Irshad Ahmed (I am relatively new to Sun)

Hi
You have not indicated if you have the router ethernet ports working
at 100Mbps or 10Mbps. Depending on this sometimes, Sun systems may
not be correctly auto-negotiating their ethernet port settings.
You may set these parameters to force Sun Ultra 5 to a 100Mbps mode or a 10Mbps mode.
For forcing it to 100Mbps, Full Duplex mode and disabling the auto-negotiation, put these entries in /etc/system:
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=1
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=0
set hme:hme_adv_10hdx_cap=0
Conversely, if you want to force your Sun to work on 10Mbps, Full
duplex mode, (if your router does not support 100Mbps) in the same
/etc/system file, put the following entries :
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=1
set hme:hme_adv_10hdx_cap=0
One of these should solve your problem. You need to reboot the system
after putting these entries.
You can also check the port at the OK prompt using the command
"watch-net". This test the onboard ethernet interface.
You may also apply the hme patch released by Sun that fixes many
known problems with hme ethernet driver. The patch id is 108981-03.
It is available from the site :
http://sunsolve.sun.com
HTH
Shridhar
Sun-DTS

Hme0: Link Down - cable problem?

i've a problem i've buyed an ultra 10 (used)
i've reinstalled solaris 10 01/06
when it boot the o.s. it give this error message "hme0: Link Down - cable problem?"
and network don't work.
i cannot ping my router but i've gave to my sun an ip of the same netmask (sun ip 192.168.1.88 router ip 192.168.1.1)
i've checked the cable and it's good (it work with a normal pc)
the led on the switch is on (it's green)
maybe i need some patch
how can i do?

gio,
You didn't necesarily do anything wrong.
You do not necessarily have any broken equipment.
There may just be somthing that is incomplete in the setup.
Begin by checking if your network settings were set up correctly by running:
# ifconfig -a
(it's usually best to troubleshoot while you are root user)
If the output from the ifconfig command seem to be complete, you could always think about reconfiguring the NIC all over again.
If you are not sure, then just paste the entire output results back here.
Also, use the forum search function, using keyword sys-unconfig.
Next, read the Solaris man pages for sys-unconfig.
That command will force you to repeat the setup of the connection.

Howto Link Down-Cable problem?

Hi,
I am having a Ultra Sparc 5 with a hme interface and a quad card. When the machine boots it checks at boot prom level all 5 interface and reports for all qfe interfaces "Link Down-Cable problem?". All qfe interfaces do not have a ethernet connx but I also do not want to deinstall the quad card. Is there any possibility to turn thoose "interface checks" off.
Thanks Marcus

Never mind I just figured out that thoose checks just run after the boot cdrom command.

TV@nywhere Plus - "Cannot init Direct show interface... (1001)" - Windows XP SP2

I just purchased a TV@nywhere Plus card, hoping to read video from a video camera.
Whenever I start the MSI video program - the program at the top of the MSI main panel interface (see the bottom of this page for a screenshot) - I get the following two errors one after another:
Cannot render audo renderer (5001)...
Cannot init Direct show interface... (1001)
Unfortunately, this means I can't read video from the card, so I'm stuck! Fixing the video error is critical, fixing the sound error isn't important (the video I'm importing is from security cameras, which don't have sound).
I've tried updating the directx drivers, but they seem to be the most recent?
I've tried updating the MSI drivers from the MSI site, but they seem to be the most recent?
Someone mentioned messing with codecs somewhere/somehow, but I don't understand how to do that.
I really need help. My only option at this point is to return the card and find another..
Thoughts?
Technical Details:
TV@nywhere Plus
NVIDIA GoForce 8400 GS, 512MB (using nv4_disp.dll v6.14.00.11.7516)
IBM ThinkCentre
Windows XP Professional SP2 (5.1, Build 2600)
Intel Pentium 4, 3.2GHz
1.5 GB RAM
DirectX 9.0c (4.09.000.0904)

I don't get errors using the program you suggested (or webcamxp, the program I was using), however, the video signal is black... no video going through to these apps.
Which is why I was testing with the MSI app, thinking if I could get it working there, it would work within my other apps.
I will try to refresh the video/audio drivers.
Quote from: Stu on 23-June-09, 01:32:15
Try AMCap, and see if you get the same errors there.
http://amcap.en.softonic.com/
Also, try updating your video card drivers, and audio drivers.

MSI TV@nywhere plus Remote with Windows 7 64 bit

I have the TV@nywhere plus and Windows 7 64 bit. Everything works except the remote. I downloaded the latest drivers from the MSI site and I have the remote icon in the bottom right of the screen. However it does not work. If I click on it (the icon) and under settings it shows MediaCenter; I can not get it to recognize the MSI TV software. And the remote doesn't work in Media Center either. Any suggestions? Thanks.

Did you download the >> TV@nywhere series Remote Utility << or just the other drivers? If it doesn't work with the Vista utility then it's not going to work in W7 64 bit.

Is this just a LVDS cable problem? Help please

http://img.auctiva.com/imgdata/1/1/3/1/9/0/5/webimg/371736702_o.jpg
I was told that this could just be a LVDS cable problem, but I've also read it could be a logic board problem. Any help would be appreciated.

OK, the above was the report after the MacBook had been plugged in for a few days. I decided to see what came up when I started on the battery, but the first time I tried it, as soon as Safari launched (it's a login item) it went down. So I let the battery get back up to 100%, and restarted, bypassing login items. System Info reported this:
Battery Information:
Model Information:
Manufacturer: DP
Device Name: ASMB013
Pack Lot Code: 1
PCB Lot Code: 0
Firmware Version: 102
Hardware Revision: 300
Cell Revision: 200
Charge Information:
Charge Remaining (mAh): 4120
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 4273
Health Information:
Cycle Count: 37
Condition: Normal
Battery Installed: Yes
Amperage (mA): -2054
Voltage (mV): 10705
I note that those last two items are quite different, and indeed, the voltage had been reduced to < 11V. Dunno if that's significant.
I then tried launching Safari and it promptly went down. It occurred to me that the issue might involve Safari specifically in some way, so I let the battery charge back up again, de-logined Safari, and restarted. I was able to launch a few smaller applications; then I launched Backup, so far so good, but when I tried actually starting a backup, poof.
It's too bad I can't either find a MacBook to borrow to try with my battery or borrow a battery; no one I know has an appropriate model MacBook.

CA-42 SOLVED USB CAble Problem !

Here is the answer to many CA-42 Cable problems people are having.
First, Nokia says you must use their cable. NOT! The problem with the Chinese cables I found is the pins are not even. With a file, file down the pins so they are all the same length. With 1 or 2 pins longer than the others, the remaining pins do not make contact. Do not file down the longer ones any farther than the short ones. It will work !
It works. I have been trying to get this resolved for 3 days. Filed the pins so

Try uninstalling PC Suite, and also the Nokia Connectivity Cable drivers from Control Panel (Add/Remove Programs).
Then download and install the latest version of PC Suite with the latest cable drivers from:
http://www.nokia.com/pcsuite

TVR Application Interface for TV@nywhere Plus

Hi
I have looked around and i can't seem to find the TVR Application Interface software for my TV@nywhere Plus. I found the Drivers and the remote utility just need the software. I have lost my cd

It's in the same place with the Remote utility and drivers.
http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=616

TV@nywhere Plus Cable problem

Similar Messages

Maybe you are looking for