TV @nywhere with WinXP problem

Symptoms:
Display freezes after about 30 seconds, need to reset the system.
on boot the program also freezes and need to end task the process.
I originally had a Win2k install and everything was nice and peachy on there. Then I up-graded to WinXP with all the same hardware and such.
Re-installed drivers and PVS aswell as all the up-dates.
Symptoms above are very predictable also, launch program and wait for crash.
Haven't even been able to go through the entire setup process of configuring the program.
I was just wondering if anyone else has experianced this problem and would be able to help me in fixing this issue.
Thanks,
LiGGyMaN

It`s a patch Microsoft released to fix a flaw in NTSC-J, PAL, and SECAM TV Tuner support introduced by the DirectX 9.0b release
you can find it here http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&displaylang=en
after I installed it the tuner finally started to work and I was able to use other progs and trash MSIPVS.

Similar Messages

EAP/TLS , PEAP problem on PORTEGE with WinXP sp2 Tablet ed.

We have: ap Cisco AiroNet350 with WPA-EAP, Freeradius with configured EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2.
This problem discribed at http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
Maybe to solve this problem we need a fix ( http://support.microsoft.com/kb/885453/en-us ), but microsoft support tells to contact with notebook manufacturer.
Can anybody help me with this problem?

Hmmm Im not expert on this field but it seems that the MS OS update is need. (I hope)
The preinstalled Windows OS is a simply OEM version and usually every updates should be possible. However, if the MS guys told you to contact the notebook manufacture so you can contact the Toshiba authorized service provider in your country for more details.
But I have investigated a little bit in the net and found this useful site:
http://searchnetworking.techtarget.com/originalContent/0,289142,sid7_gci945257,00.html
1. 802.1X depends on communication between your wireless router and a RADIUS authentication server. Whether you're using WPA2, WPA, or WEP with dynamic keys, the following 802.1X debugging hints can be helpful:
a. Re-enter the same RADIUS secret into your wireless router and RADIUS server.
b. Configure your RADIUS server to accept RADIUS request from your router's IP address.
c. Use ping to verify router-to-server reachability.
d. Watch LAN packet counts to verify that RADIUS requests and responses are flowing.
e. Use an Ethernet analyzer like Ethereal to watch RADIUS success/failure messages.
f. For XP SP2, turn on Wzctrace.log by entering "netsh ras set tracing * enabled"
2. If RADIUS is flowing but access requests are being rejected, you may have an 802.1X Extensible Authentication Protocol (EAP) mismatch or credential problem. Fixing this depends on EAP Type. For example, if your RADIUS server requires EAP-TLS, then select "Smart Card or other Certificate" on your wireless adapter's Network Properties / Authentication panel. If your RADIUS server requires PEAP, then select "Protected EAP" for the adapter. If your RADIUS server requires EAP-TTLS, then you'll need a third-party wireless client like AEGIS or Odyssey.
Make sure that EAP-specific properties match for your adapter and server, including server certificate Trusted Root Authority, server domain name (optional but must match when specified), and client authentication method (e.g., EAP-MSCHAPv2, EAP-GTC). When using PEAP, use the CHAP "Configure" panel to prevent Windows from automatically re-using your logon.

WinXP problems with MSI 694D Pro v1.0 (MS-6321)

Greetings, i have some serious problems with WinXP install with my "brand new" MSI 694D Pro, PCB Rev 1.0 motherboard.
Running with one cpu is just fine, installation and inside windows it's completly stable after chaning a few leaking caps.
However, if running with both cpus I have serious problems installing as well as running Windows.
Once I manged to get in, and then it was 100% 2xPrime95 stable for 6hours.
Latest BIOS, no issues with ram etc.
I narrowed the problem down (I think) to the ACPI identification of the secondary processor on startup. Is this a known problem to v1.0 PCB's of this board, is there a workaround, can one set the ACPI ID manually.
I'd prefer to run WinXP Pro SP1 on this computer, and sure hope I will not have to be forced to Win 2000 Pro for this issue.
Does anyone have any tips or workarounds?
Specs;
MSI 694D Pro (MS-6321) with latest BIOS that's supposed to fix WinXP issues
2x512 133mhz SDRAM doublesided
2x866/133 256mb cache Coppermine w matching stepping
More then enough cooling
HEC 400w PSU
A handfull of HDD's and a few optical units.
WinXP Pro (early release without any SP on install), don't recall build atm sorry.
So far I have tried with diffrent ram, diffrent BIOS's, diffrent PSU's, inside and outside the case, Memtest86 error free, a horseload of diffrent BIOS settings, minimum hardware installed and most things in diffrent compinations.
I'm a hardware geek and is well versed in those checklists so I don't think I have missed anything and is pretty convinced that the other hardware is working as it should, I'm pretty lame on OS handeling thou.
Anyone?

Everything was just fine once I was in WinXP, thats where I ran Prime95 ... But I only managed that once, I havn't managed to replicate that.
That once I installed with once CPU and the added then second one then rebooted. Realy wierd that I can't replicate that...
EDIT;
Some clarification

Forms6i with WinXP and OLE

Message
Hi experts,
Hi Experts,
We are encountering the following scenario, and wonder if anyone else has experienced this, and if so, whether there is a work around we can try.
Some of our office pcs have recently been upgraded to Windows XP os and have OfficeXP professional.
In previous tests we have run Forms6i with calls to OLE to launch MsWord, and produced letters with no problems, even when running in Win2k and calling
Office XP Word. We would be presented with the merged document whenever we chose to "Edit" or "Preview".
However, now that some of our development machines are running in WinXP we get thrown straight into the data file, rather than the merged word document
(the documents in question all perform a mail-merge).
Any ideas?
TIA,
Alexandra.

Hi,
Last year I build a tester with a PXI rack. I started with a MXI interface. The PXI modules are a part of your PC and it helped me to wire the hardware VI's. Later on when the hardware part was ready I switched over to a embedded controller (Not RT)
With VISA I can still acces some devices but not all (All PXI devices are non NI except the controller)

Is Adobe Flash compatible with WinXP using `Dual Core CPUs ??

Is Adobe Flash compatible with WinXP using Dual Core CPUs ??
I have this in my current system
WinXP 32bit SP3
Asus M2N68-AM Plus motherboard
AMD X2 7850 Black Edition Dual Core CPU
2GB DDR2
WD Caviar SE16 500GB SATA drive
Onboard VGA **only**
I keep having consistent problems using this new motherboard with a Dual Core CPU
My new motherboard keeps crashing randomly while watching video online.
I can watch a video for about 2 min or even 20min and then the PC randomly crashes
I get this weird mosaic pattern on the screen whenever it crashes and then I have to press Reset to Reboot
And it **only** crashes after streaming a video on any of the websites, YouTube, CBS.com, NBC.com, Hulu.com etc, etc
My last PC never crashed while watching a video online - it was just slow since Adobe player is a hog -- and it was still a 1.8GHZ CPU !!
My last PC is still using version 10.1 for the Adobe Flash player -- and it ***never*** crashes
The most I ever see happen on that one is that the player might occasionly crash in the video window and the error message says to reload the Flash player.
Then I tried this remedy of disabling the Hardware Acceleration in the Adobe Settings -- but no luck still.
I even downgraded to 10.1, then 10.0 and it still keeps getting these random crashes while watching video
I'm wondering if WinXP 32bit is really compatible with Adobe Flash when using a Dual Core CPU
Before I plunk down $100 for Win7, I'm thinking about trying Ubuntu and see what luck I have.
I haven't seem anything to the contrary yet.
thanks,
Message was edited by: Ragoooman

What browser & version do you use?
How exactly does that "crash" manifest itself? What exact error message are you getting?
Have you tried to update the device drivers for your graphics/video/display adapter?

I am facing with the problem "plugin-container.exe has encountered a problem and needs to close. Please suggest how to fix the problem.

I am using desktop computer with windows XP. Sometimes, I am facing with the problem "plugin-container.exe has encountered a problem and needs to close". After showing this event, the browser disappears automatically.

See if there are any Crash Reports ID's saved.
Type '''about:crashes''' in the Location Bar and hit Enter.
Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year.

IPod and iTunes not compatible with WinXP

It appears that the iPod (I have a 4GB nano) and iTunes (I tried what was on the CD, as well as the latest download of 6) are not compatible with Windows XP Media Center Edition (patched to the hilt, all the latest updates installed).
Installation works fine but iPod updater does not terminate cleanly and the iPod nano does not get rebooted properly, and although iTunes sees the iPod when it is plugged in, it does not recognize it from plug-in to plug-in (it's supposed to remember the name of the iPod device, and not re-prompt you to register, etc.).
Also, when attempting to copy MP3 files to the iPod, it appears as though they are copying but they do not wind up on the iPod no matter how hard you try.
Windows 2000 SP4, however, does not have any problems with the iTunes or iPod updater software and everything seems to work just fine.
It would behoove Apple to investigate the compatibility problem that their software has with Windows XP Media Center Edition, and fix it as soon as possible.

When i startup itunes it says:
"The software required for communicating with the ipod is not installed correctly. Please reinstall itunes to install the Ipod's software"
I am on xp media center edition 2005
When I run the ipod updater it gives me "ipod service error"
What can i do?
I bought the 4gb nano just yesterday.
both my ipod and itunes software are the Updated September 23, 2005 versions
ps on my old pc with winxp sp2 barebones edition, it works fine...
maybe its cos in mce 2k5 i got 2 users?

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

Remote not working with WinXP 64

I have a X-FI Platinum card with the front module and remote. Under WinXP Pro everything worked fine. I have since upgraded to WinXP 64 bit Pro and the remote does not work.
I have installed the latest driver for WinXP 64 (At least last weeks driver) which went OK. Soundcard seems to work OK. I have a 5. speaker setup and I get sound from all speakers. Before there was the createi've audio console that was in the system tray, but that doesn't seem to be there with WinXP 64.
Is there another download that I need to do for the Remote to function ? Also I no longer have any sound test options in the audio console is there another download for that as well ??System Specs:ASUS P5N32 SLI Deluxe MOBOIntel P4 660 processor2 GB RAMBFG 7800 GT video cardX-FI Platinum sound cardWinXP Pro 64 bit?Thanks,?wstreaker

I am not sure whether the remote software gets installed with the 64 bit drivers or not. I know some people have turned to alternate software to control the remote on WinXP 64 bit edition successfully. I am sure you can find out what I mean by searching these forums, I am not allowed to say any more than that. Hope that helps?

Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how

Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your help

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Monitors with Gradient Problems?

Hi All,
Further to my recent post "monitor screen display terrible!"
Finding a monitor without spending a lot with excellent picture quality is proving differcult! I have tried a Philips 22" monitor Model 220CW9FB and now a BENQ T900HD 18.5 WS monitor all not as sharp with good contrast as my 4 year old G5 iMac. Also has a gradient problem e.g. as you get up off your chair and continue to look down at the screen the white background of the screen turns light blue then darker and colored parts turn white!? Also looking at an angle to the side anything light blue turns a light brown!? Then as I'm viewing something as in Apple Discussions each box of replies alternate white then light blue and so on but looking at normal distant as you type each box are white. You have to lean back in your chair, twice the distance back to actual see the blue box then white box!?
What's that all about? I have noticed this on the new 20" iMacs too but the three new 24" iMacs are great just like my Rev A G5 iMac of 4 years. Are these inferior screen problems anything to do with them being TN panels as I've just read about?
I really don't know where to go from here as the screen quality is important. I'm use to the great screen quality of my old G5 iMac and don't want to go down in quality for the sake of moving from a Mac PowerPC to an Intel Core 2 Duo even though I need this for EyeTV hybrid and all the features of iLife '09 etc.
I don't want to spend a huge amount for an Apple display as I might as well get the entry level 24" iMac. The main reason for not getting the new iMac is I don't like the glossy screen, although today I heard there is an option for a 24" matt screen... any truth in that? Then again will I be able to return the new Mac mini I've only had for 6 days for a 24" iMac?
Other suggestions seen here is turning my G5 iMac into a stand-a-loan monitor or maybe a 20-year-old CRT 19" TV I have can be used as a monitor and if so what connections are needed? Any ideas on these options?
So buying the new Mac mini has created a lot of unexpected problems. I thought as asked about before getting it was told any monitor would have the same picture quality as my old G5 iMac, but after the fact found out this is not the case.
Thanks for the read & any ideas/thoughts much appreciated...

AFAIK Hmmm Googled "As Far As I Know"... So far I've tried three monitors (all with gradient problem) so it looks like you are correct. I'll try a couple more today as if I need to return my Mac mini with Philips monitor need to do soon for a 24" new iMac even though the Mac mini is not at fault. I'll have to get use to the glossy screen. While writing this an item "iMac or MacBook display too glossy? Apply inexpensive non-glare LCD protective film" has appeared in MacDailyNews.
http://macdailynews.com/index.php/weblog/comments/20561/
Thanks for the idea using my G5 as a monitor but maybe quite an involved process?
It's a shame in all my research before buying a monitor no salesperson mentioned TN display panels. Mind you since the problem no salesperson has said they know about TN display panels or better monitors, just saying any monitor will work with the new Mac mini. Very frustrating!

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I bougt a new Macbook pro in 02/26/2013, in 11/25/ 2013, my trackpad become bulging, they exchange the trackpad, but not the bulging battery. I went there yesterday, with different problem, and they said one screw came off from the truckpad again!

I bought a new Macbook pro in 02/26/2013 from Apple Canadian Ices -003. Than I could not use it, because my cursor uncontrollably was jumping around the screen, I was resumed my trackpad become bulging, Than on11/25/ 2013 they changed my trackpad for free, because was manufactoring defect, but not the bulging battery. They said that is do not needed. Since that my cursor is quiet often quivering, I think my Macbook has serious manufacturing defect. But they said no, during a year period I went to the genius bar at least 15 times, with this and similar problems. I went there yesterday, with different problems, and they said one of the screws came off from my truck pad, therefore they need to fix it and change it. I said: - What, how, what is the real problem? A screw does not comes off just like that? They will change my trackpad again, but not the battery. They said has to rebuild the operation system, I'm saving all of my data right now! I would like to exchange the battery too, or maybe get a new Macbook. My Macbook is 2010 China model. How long I would have this trackpad problem? What are you suggesting?

If it's a 2010 as you say towards the end of your post, it's out of warranty. The battery isn't covered in that case. Why don't you just buy a new battery if that's your concern? If it's a 2013 as you say up at the top, it shouldn't have a bulging battery. How do you know it does? If it really does, ask for the store manager and explain the problem.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

TV @nywhere with WinXP problem

Similar Messages

Maybe you are looking for