TV option missing from FN-F5 menu on Satellite M30

I just bought an S-video cable and a sound cable to enable me to connect to my TV and watch films from my laptop. After connecting it to both sides I tried to connect to the TV output using the fn f5 key.
However, at this point I did not know what button to press on my TV ?(ir the s-video option). After figuring this out I tried again on my laptop only to find that the only option available on the fn f5 menu is lcd/crt. All the others are now missing. I went through the display settings way but this does not work either, and only turns the screen black for a few seconds before turning back on.
Can anyone suggest a way to get all the other options back on the fn f5 menu or if there is an easier way to view my desktop and watch films from my laptop to my TV. Any suggestions would be greatly appreciated.
Thank u.

hi
i also tried setiing it up using the display properties way, but it also does not work. Also in my display settings i do not have an 'NVidia tab' but i have a 'GeForce FX Go5200 32M/64M' Tab instead.
But when i click 'device settings' from a little drop out (to the side) box and then tv, it brings up the warning box - 'windows will now apply your new device settings...' so i click ok to this and the screen turns black for about 2 seconds and turns back on. from which i get another warning box 'your desktop has now been reconfigured... and a little timer asking if i want to continue' but nothing happens after i press yes.
on my tv i see part of my desktop, not in proper colour and very zoomed in, very unclear, with no icons or pointer.

Similar Messages

  • Recovery option missing from ThinkVantage boot menu

    On my x220 I installed an mSATA hard drive in addition to the built-in disk. I re-installed Windows 7 and all of the Lenovo utilities onto the mSATA drive, then deleted the 100mb system and primary Windows partition from the spinning disk. I did not touch the RnR partition.
    Now when I press the blue ThinkVantage button during start-up, recovery is not one of my choices. I cannot get into the recovery partition. What steps are necessary to re-enable this feature?
    Thank you. Screenshots below show the in-tact recovery partition, and my menu of choices when I press the ThinkVantage button
    Link to picture
    Link to picture
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    Did you install the mSATA using recovery discs from Lenovo or make a clean install?
    As the F11 is the only option which is missing, and the only option which is not a direct BIOS command and must be in the Master Boot Record, my guess is that your BIOS / MBR don't know that it should show the message or even know that the recovery partition exists.
    How you sort that all out is unknown to me, not one of my skills. Maybe install the mSATA from recovery discs which would then also locate the recovery partition also on the mSATA or somehow edit the MBR which I definitely don't know how to do???
    edit; grammar
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Laserjet P3005dn network configuration options missing from I/O menu

    I acquired a Laserjet P3005dn that should be networkable, and has an Ethernet port in the back, but when turned on, there is no network configuration in the menu.  From the menu, I choose Configure Device, I/O.  The only option is "I/O Timeout".  The "Embedded Jetdirect" option is not there. 
    I tried to do a cold reset, but it made no difference.  Can this be fixed?

    I see that this is a commercial LaserJet printer.  It would be best to post in the commercial LaserJet forums.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Why are options missing from the Insert Menu in DW CS6?

    I'm trying to learn how to use CS6 with a Classroom in a Book. Unfortunately when the book tells me to insert something using the Insert Menu I often cannot find the options. This is true for Image Placeholder, for server-side includes, and also true for insert tabular data. Maybe I am just too stupid to find these options, but using Windows 7 x64 I cannot seem to find them. Maybe somebody can point out these menu items to me?

  • Finder issue: Compress option missing from right-click menu and greyed out in File menu

    How can this be, and - more importantly - what can I do to resolve this issue? Thanks.

    You mean this ThisService?  Never heard of it before.
    Why don't you create services using Automator (in /Applications)?  That's one of the things it is designed to do.  It has no problem with making sure they are properly created and installed in ~/Library/Services so that the finder can see them there under the conditions desgnated when you create them.  You don't even have to log out and back in.
    Note, if you like using applescript you can use applescript in automator too.

  • Why is the "Send to iDVD" command missing from the share menu in iPhoto 9.4.3 when trying to send a slideshow to iDVD?

    How come the "Send to iDVD" command is missing from the share menu? In iPhoto I used to be able to send my slideshows to iDVD simply my clicking on the slideshow, selecting the "Share" menu at the top and going to "Send to iDVD". Now in iPhoto 9.4.3 that option is missing.
    Further i am also using iDVD 7.1.2 and running OSX version 10.8.3.
    Thanks!

    Export the slideshow via the Export button at the bottom of the slideshow window with Size = Medium or Large.
    Open iDVD, choose a theme and drag the exported movie file to the menu window being careful to avoid any drop zones.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Aperture 3 save PDF to folder as JPEG option missing from PDF services?

    I have Aperture 3 downloaded from the App store in a MAC OSX 10.6.7 but the save PDF to folder as jPEG option is missing from the print menu? I do not have discs to re-install Aperture so can I add a workflow directly to the PDF services library and if so where can I get a copy of this workflow?

    Hi frank, thanks for the advice, I am very new to Apple and Aperture. I think I am looking at the second print menu, I am basically trying to add text to a phot and have followed this online guide
    http://photo.rwboyer.com/2010/02/07/aperture-book-tool-screen-cast-take-two/
    I can do everything except the last part which is save PDF to folder as JPEG. My version of aperture does not give me this option and I only have access to the following:
    Open PDF in preview
    Save as PDF
    Save as Post Script
    Mail PDF
    Save as PDF-X
    Save PDF to iPhoto
    Save PDF to web receipts folder
    Pictures
    Edit Menu
    There is no option to Save PDF to folder as JPEG and I cannot add this function from the Edit menu? Previous discussions suggest re-installing Aperture 3 but I downloaded this from the App store so do not have discs to reinstall?
    Thanks
    Mike

  • "Deploy" Option Missing from VS

    We just finished installing SharePoint 2013 RTM and VS 2012 for development purposes. I also installed the Preview 2 of the Office and SharePoint Dev Tools. The "Deploy" option which was previously present in Visual Studio to deploy SharePoint projects seems
    to have disappeared. Oddly, I can however still tell the projects to Debug, which does the equivalent of Deploy + starts the debugger.
    This is an extremely annoying issue as it is much faster to Deploy without starting the debugger. If anyone has any solution I'd be very appreciative. Thanks.

    try these linsk:
    https://louisliang.wordpress.com/2013/07/02/deploy-option-missing-from-visual-studio-2012-for-sharepoint-project/
    https://social.msdn.microsoft.com/forums/sharepoint/en-US/c7b00231-680f-4fa1-b7ea-0008697c8122/visual-studio-2012-missing-deploy-option-on-build-menu
    http://stackoverflow.com/questions/22944015/deploy-option-missing-visual-studio-2012
    http://sharepoint.stackexchange.com/questions/49718/where-is-package-menu-item-in-visual-studio-2012
    http://sharepoint.stackexchange.com/questions/82878/missing-deploy-button-visual-studio-2012
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • Combine Files into a Single PDF option missing from start up in Acrobat Reader XI

    The 'Combine Files into a Single PDF' option missing from start up in Acrobat Reader XI and is also not available on the right-click button.

    There's no such thing as "Acrobat Reader XI". There's the free Reader, which doesn't have this option, and there's the paid product Acrobat, which does...

  • Why is the "basic" edit option missing from the develop module?

    why is the "basic" edit option missing from the develop module?

    http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

  • Photomerge command has gone missing from File Automate - menu

    Was using Photomerge command successfully in PS and at some point later PS crashed and locked my Mac. I restarted and now the Photomerge command is missing from the File Menu. I asked Adobe support for help, they had me reinstall latest PS but it's still not there.
    Is there anywhere in the PS Folders I can check for a file associated with this command (like there are for Scripts for example) and could possibly replace?
    I also tried initiating the command from Lightroom with a set of images selected and using the relevant contextual menu and it produces an error saying Photoshop could not be launched (it is launch though).

    Hi and thank you. Yes Photomerge.jsx is there in the scripts folder. Although when I go to launch other scripts from within PS using the File> Scripts… menu I get the following error:
    Could not complete the Image Processor command because Photoshop was unable to find the JavaScript plug-in
    How can I get it?

  • Personal hotspot option missing from my ipad , please do help me fix this problem

    why is the personal hotspot option missing from my ipad ?

    Personal hotspot is only on the iPad 3rd generation and higher and the iPad mini, not avail on the iPad 2. Heres the information from apple about the personal hotspot http://support.apple.com/kb/ht4517

  • PSE11 Outlook Option is missing from Client Email Menu

    I have recently installed Photoshop Elements 11 on a new Windows 7 64 bit PC.
    When I try and send an attachment by email (Share - File Attachment) then my Outlook 2010 client is missing from the list of Email Client options. I only see the Adobe service and Windows Live Mail.
    Is there a way of getting Elements 11 to recognise that I have Outlook 2010 installed ?
    Thanks, Dave

    Hi Dave,
    Yes, it would be useful if Adobe included this sort of thing in the release notes or even a FAQ.
    I think that the main problem lies in the 32bit PSE trying to talk to a 64bit application.
    I did notice that when I got my Office 2010, even Microsoft recommend to use the 32bit version.
    Good Luck - please let us know the results.
    Brian

  • Video menu option is missing from my iPod menu.

    I purchased a 60gb photo ipod approximately two weeks before the video release. When the video release software was available I downloaded it and the "video" option appeared on my iPod menu. A few weeks later I ordered my first videos from Itunes. After downloading the videos and updating my iPod, I found the video menu option was gone from my iPod. I have reset my ipod, deleted and installed new software, used the updater and have never been able to get the "video" menu option to show up again on my iPod. I can view the video in itunes but I can't get it onto my iPod. I just downloaded the latest iPod and iTunes software today and still no luck. Has anyone else had this problem? If so, were you able to fix it? I love the iPod and would like it a lot more if the video function worked for me. Thx for the help.
      Windows XP  
      Windows XP  

    Welcome to Apple Discussions!
    You need to have the 5G iPod with video for videos to transfer.
    Which iPod Do You Have?
    If you do not have a 5G iPod, you cannot view videos with the apple software, regardless of what you say the iPod used to show...
    btabz

  • "Toolkit for CreateJS" Missing from Flash CC Menu

    I'm a Creative Cloud user running the latest version of Flash Professional CC on my 27" iMac running OSX Mavericks. I want to export an animation file using CreateJS. However, the "Toolkit for CreateJS" option is missing from my "Window" drop down menu - it's not even grayed out, it's just not there. Using the alternate of Shift+F9 doesn't work either. I tried downloading the CreateJS extension from Adobe but is says I need to be running CS6 for it to work, and that "Toolkit for CreateJS" is supposed to come pre-installed in Flash CS Pro. But it's not there. This is very frustrating, and I'd be deeply grateful for any help someone could give me. Thanks!

    HTML5 publishing with the new update is now more inetgarted with the application and we now have a new document type called "HTML Canvas" which publishes using the same CreateJS libraries.
    The Toolkit for CreateJS panel is no longer present with the new update, but the HTML5 publishing using the toolkit is now intgerated as part of the HTML canvas document type that you will see new in this update.
    Please refer to:
    http://helpx.adobe.com/flash/using/whats-new.html#Creating%20and%20pub lishing%20HTML5%20Canvas%20content
    Also you can convert your previously created AS3 document that publish to HTML5 into HTML5 Canvas documents. This is also mentioned in the documentation below:
    http://helpx.adobe.com/flash/using/creating-publishing-html5-canvas-do cument.html
    -Sujai

Maybe you are looking for