TV or hard disk recorder to Zen Na

Is there a way or cable to connect my Zen Nano to TV or Hard disk recorder via the line in for recording to the Nano?

Has the Nano a line-in connector - I thought it was the Nano Plus (and the N200) with the line-in.
If you just have the Nano then this won't be possible.
PB

Similar Messages

Widescreen with hard disk recorder

I searced on Letterbox and got a ton of posts so I thought I would just ask my question.. hopefully its not too lame.
I have 2 cameras with which I am shooting 16:9. One I am shooting with tapes the other I am using a nnovia quickcapture hard disk recorder.
When I capture into final cut from tape, I get letterboxed footage. When I bring footage in from the hard disk.. its widescreen, no letterbox. Obviously, I need to match the footage. How can I letterbox the footage coming in from the hard disk recorder?
Or, how can I match the footage in terms of dimensions. As an aside, when I use motion to zoom in on a cut I lose the letterboxing that Final Cut generated. How do I replace it?
Thanks!!

As an aside, when I use motion to zoom in
on a cut I lose the letterboxing that Final Cut
generated. How do I replace it?
Thanks!!
i can't answer anything else but to above, that should be as simple as putting a widescreen matte on that clip that you're doing a zoom in on.

HDMI Hard Disk Recorder to Blackmagic Intensity Pro

I have a hard disk recorder (HDR) with an HDMI out. I am wondering if I can run that through a Blackmagic Intensity Pro card and pull ProRes 422 or DVCPro HD from it. (I know the card working in both formats) I'm wondering about the HDR interacting with the card.
Card looks great, we are hot to buy it, if this could work! Thanks for the help.
Sean

It probably will not work. All HDMI output devices are to have HDCP support except Camcorders. The Intensity HDMI inputs do not support HDCP. Look in the literature of your HDR and look for HDCP. If it supports HDCP them you are out of luck.

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG filesZ?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

How can I save captured clips to hard disk using the actual video recorded date, not the date I transferred it?

When using Batch capture in AP5.5, the clips are saved to hard disk using the capture date as the Created Date and Modified Date. How do I configure Premier to use the actual clips recorded date (Meta Data Basic/Date Created) so that I can view them in Windows folders and other applications based on the date the video was recorded, not when I imported it.

AFAIK, there's no way to do that with Premiere Pro. You can probably find a utility on the Internet that will change the dates for you after the fact.
Cheers,
Jeff

HELP: Vision M freezes at "ZEN" display, "hard disk error" at formatting.

Greetings!?After watching a recently uploaded video, my ZVM suddenly froze. I?tried resetting the button but that didnt do anything.
Afterwards, I?tried to?clean up,? erase/ renew the firmware, and finally- format. While doing all of the above,? I noticed that it took ages to do so and it appears that the ZVM didnt change at all.. I still see the V.6.0_0.0.23 on the Recovery mode even after the cleanup, and after the "supposed" format. I don't think it responded to anything I did at all.. What is wrong??All the while, my computer is able to "dock" the ZVM, albeit intermittently... However, when I try to renew/ upgrade the firmware.. IT FAILS
!!! When I reset, it remains stuck at the "ZEN" screen...
When I try to format,? the "HARDISK FAILURE" flashes?for about second towards the end...
Now Im stuck... What do I do next??My beloved ZVM is only ?3 WEEKS OLD, and it hurts me to think that its already busted!!?I always took care of my ZVM, never dropped it at all..
It still looks?fresh and brand new!
?Worse of all, I got it'sin Hong kong during Christmas. I can't go back there again, despite the fact that I still have the reciept
!!! I am now in Manila Philippines and I don't know if the?Creative supplier here will?ever honor my HongKong warranty.... Help!!?Rainmanph

I had the same problem with my daughter's Zen. I bought it a month before Christmas and played with it until then. She had it one week and I went through the same thing you did. When I contacted support and they heard the word hard disk failure, I was told to send it back for a replacement where I bought it or I could send it to them for repair. I was able to get a replacement and after what I went through and reading the problems that some people have had, I will be getting the extended warranty from Creative Labs.

Hard disk free space and 192Khz/24bit time recording limit...

Hello, when I try to record a long stuff at high sampling rate... 96Khz or 192Khz - 24bit , the max time that I have is 65 minutes whit the metronome set at 20 bpm, the max recording time limit is not active, and the space of the hard disk is of 900 GB... but I have only 65 minute of recording time... is a big problem when I need to record classical stuff or a Live.
--- for 12 channels at 192Khz/24bit in 1 hour of recording time the hard disk space needed is aprox 3,9 Gb... how is possible that LP 7.2.1 limit my recording time ???---- if I go down to 48 Khz I have the time of 248 Minutes of recording... ----

Hello, when I try to record a long stuff at high
sampling rate... 96Khz or 192Khz - 24bit , the max
time that I have is 65 minutes with the metronome set
at 20 bpm.
Try setting the metronome higer, say 30 or 40.
There may be a quirk in that the lowest metronome settings don't always give you the most time.
Failing that, try another application. Do you by any chance
have the OEM version of Cubase LE or Mackie's Tracktion?
Both of those will get you more time at 96khz/24.
(Seems that both of those applications come as freebies with a lot of different hardware)
You can record the tracks in one app then import them into Logic.
Pancenter

Recording on a external hard disk

I'm having problems Recording any audio track on a garageband project thats been saved on a external hard disk.......when I hit the record button the application stops responding and I have to force it to quit.......
If anybody know how to fix this or whats the best solution....I will appreciated if they could help me out......

It says You can read and write...........
Sorry for the question, its pretty dumb....but how do I reformat the hard drive?.....I want to be sure and not erase all my files......
It's the same hard drive I just to use with my old mac....I could record and save files strait into this hard drive.....but now with this computer...the same process with the same hard drive does not work.....

Zen touch Hard disk er

Hi to all, and sorry for my not god english. I've buy a Zen touch 20 Gb last year, and it's worked god. But last month, i want to hear a mp3 and i power my zen, but he going to start, reply whit and error. I try to update the formware, but the error not be removed. When i'm try to format, the response id "Hard disk error". What can i do? If i want to change the Hard disk, it's possible?
Thanks for the reply

Cat/Daniel,
If there is a recurring issue with the harddri've on the older 5gb Zen Micros, does the consumer have to pay the price for these problems? My unit was purchased direct from Creative's website for Christmas 2004. Nine months later in September 2005 the dri've just died. Only the "Creative" screen would come up. Sent back to Creative and they chose to send me a "new" unit. Great. Only problem is, nine months later, and the harddri've goes out AGAIN! Same exact problem! And this Zen has ALWAYS been handled with gentle hands, like a real harddri've should. No jarring, jolts, hits....etc.
Ah, but now Creative says even though this same defect occurred on a "new" unit less than a year old there is no 2-month warranty attached to the unit. Huh? Apparently, Creative doesn't stand behind these new units they issue as replacements. What gives? Why not stand behind the product, regardless of whether that product is new from a store, or new from the manufacturer as this one claimed to be? If these units go out with short-shelf lifes shouldn't the consumer be told in advance, that you MAY get a year's worth of workability out of it's As James (5353) in technical support emailed to me: <EM>"I apologize for the inconvenience, but according to the information provided, you are also beyond your complimentary e-mail support period. Since you are outside of the warranty we can not provide any type of email support (including RMAs)."</EM>Yikes.....so NOW what do I do with this defecti've Zen?

ZEN EXTRA EAX FREEZES"HARD DISK PROBLEM" AND WON'T RESCUE:HOW I FIX

Well nobody tried to help me so I got on the web.first if you try to paperclip reset and nothing,try this:hold the paperclip(you need both hands) and hold play/pause at the same time and disengage paperclip and you get rescue mode this is how I fixed it once,their are four options:clean disk,reboot and two more.CLEAN DISK AND RE-BOOT ONLY!Because the second option will clean out your library!If that does'nt work and if it says:"hard dri've problem" after trying several times you have to smack it on the palm of your hand and after three smacks it went back to normal!(By the way it fell off the countertop with the protecti've case and that's when this night time nitemare began,milk and cookie insomnia cure!). It just skipped,the hard dri've looks like a little record player and I guess it(like a needle on a record it jumped?)But now it works perfect again. I have "THREE WARRENTY",(TWO YEARS LEFT) but I would lose my 2,800 library if replaced repaired! A chance I did'nt want to take.PLMK if this works,SANSOO..........

A few weeks ago I dropped my Extra and had the same problem, it was now out of warranty so I figured I had a paperweight, so when I ran into this thread I figured I had nothing to lose., and gave it firm whacks on my palm, (the first one didn't work) To my surprise it powered back on, and now seems to work. I transferred new songs to it and it is now charging up again. I admit this has all occurred in the past hour so I don't know how permanent this is, but it does give me hope. I would like to emphasize though that this was a last ditch effort. I had tried going into the recovery mode and got a hard disk problem error so none of the regular options would work.

Zen Micro Lockup - Hard disk failu

Zen Micro froze while playing an MP3 file. Had to remove battery to reboot. Can hear the hard disk seeking ~25 times during powerup before it freezes at the "CREATIVE" logo screen. Rescue mode commands - reformat/reboot/disk clean up has no effect. Can't hear any hard disk activity when unit held close to ear.
Firmware version is v0.0.56. Hard disk had ~750KB of free space. Unit was sitting still on desk at time of failure. Used less than 2 weeks.
Aside: Have experienced several lockups with this device during playback and docking. All were resolved by removing battery. Firmware seems to be very buggy.
Already logged a formal e-mail support request. Wonder if anybody has experience similar failures.

You do hear of them from time to time. It might be that the heads have jammed, in which case you can try the advice here at your *own risk*.

Updated and smaller Zen Touch using Hitachi's newest C4k60 hard disk

The new Hitachi C4k60 hard disk is really small and is NOT inside the "actual" Zen Touch:
Zen Touch hard disk model (Hitachi): HTC424020F7AT00 (red it on a Zen Touch hard disk)
Hitachi C4k60 model: HTC426020G7CE00 (found it on Hitachi's website, that's the 20gb version, also available in 30gb)
Obviously, the 2 models aren't the same, and the new C4k60 is "much" smaller (physical size).
Anandtech's review of the Creative Zen Portable Media Center says that it uses a Hitachi C4k60 hard disk. So Creative are already using those new Hitachi hard disks for some of their products.
Is it possible that an updated version (smaller of course) of the Zen Touch using this new hard disk appears pretty soon? I really HOPE so...
I know that the Zen Touch isn't old, but other brands already have smaller 20gb mp3 players using Hitachi's new C4k60 hard disk, so I guess Creative is going to respond with an updated, smaller and even better looking Zen Touch (other improvements like a line-in, "standard removable dri've in windows" and EAX would be welcome to)!
Can someone confirm this, or give any details/information?
ThanksMessage Edited by Lazar on 2-27-2004 03:06 AM

I just saw the archos gmini xs200 in a local shop, had it in hands:
it's really a nice player, and it's so small for a 20gb one, but from different online reviews, true battery life is only about 8hours and battery isn't removable. This sucks !!!
Well, i'm goin to wait for a new Zen Touch firmware enablling driverless windows support or an updated gmini xs 200 with a better or removable battery...
Still no new high capacity portable mp3 for me YET, lol !Message Edited by Lazar on 2-28-2004 :23 PM

Creative Zen Player Hard Disk Problem!

There's a problem with my Zen player.
I was listening to music when suddenly it hanged and became very warm.
After recharging the battery, the zen player did not load properly and instead listed out 4 options for me to choose:
Clean Up
Format All
Reload Firmware
Reboot
Rebooting doesnt help at all.
Clean up refuses to work and nothing happens when I press yes.
Format All gives me an error. Says that it is a harddisk error.
Reloading Firmware is impossible because Creative MediaSource Organizer cannot detect my Zen player when I plug in onto the computer. It also says that there is a harddisk error.
Is there anything I can do? Can I get a refund? I hope this will not happen again because my Zen player is only around 2~3 months old and this shows that Creative Zen players have poor hardware. I hope I need not retract my praises of Creative's Zen player.Message Edited by lijuliju on -7-2005 0:59 PM

Your faulty player does not equate to Creative having poor hardware. Be realistic.
Hard disk problem error not surprisingly indicates there is a problem with the hard disk, so contact support to get a replacement (click the link Support > Downloads on this page).

Zen vsision M - hard disk error

MP3 got slightly wet and after working for a while stopped working. Have tried Clenup, Farmat all and even uploading the firmware again - which failed. All I get is hard disk error.
Is there anything else I can try please as it was an expensi've player and my favourite to date.

Water & electronics do not mix. How did you dry out the player after the water incident? Chances are the hardri've may have rusted . You will not be able to reload firmware or anything for that matter

Zen Vision:M Hard disk click

one more question: Is it normal to hear a barely audible hard disk click while switching tracks/videos :smileyindifferent:
the last time I heard this "barely audible hard disk click" was when the iPOD started acting crazy...eventually she died hard disk corrupt/failure
the switch to ZVM is gr8 and love this piece...it's only 3 days old!!!
so is this normal and I have nothing to worry abt? or do I need to run back and return it b4 she gives way :robotindifferent:

its normal you guys its the head thats switching places. if its a faint click or once in a while a loud click its when your looking at pictures , zooming, also videos seeking and yah. when you turn the player on after 6 hours youl here th hard dri've boot up

TV or hard disk recorder to Zen Na

Similar Messages

Maybe you are looking for