TV-out doesnt work S-Video ---- Scart !

Hi ,
I have MSI RX9200SE and when i connect the S-Video to TV with Scart and I switch it to AV it shows nothing - blank ! In my control panel it recognized TV and everything works fine except I dont see the picture . im using S ------> SCART 2 m
cable . When I switch program or activate TTX it shows my Desktop but its all RED and the picture is jumping around fast ! Could You please help me ?!

Similar Messages

Dtt 3500 Digital OUT doesnt work

The first, sorry for my bad english, its a long time ago
I from Germany and i got the Playworks DTT 3500. But the digital OUT doesnt work. I put the capble in the decoder but doesnt happen. The green diode " DIGITAL DIN, MULTICHANNEL " doesnt glow.
My brother got the DTT 3500 too and his diode glows. He has a normal 5.1 System. I have only the stereo mode.
Can somebody tell me, what can i do?
Thanking you in anticipation..
Mfg Arthur

Well, it could be, it's really hard to say.
There is a problem with a center speaker when you use CMSS 2 (with Audigy 2 cards) and have an EAX Effect turned on. Center speaker is then silent and no sound comes out of it, except when you listen to a Dolby or DTS soundtrack.
I don't know if you have a Creative sound card at all neither I think that your options are set excatly as I mentioned, so yes, it could be the speaker. The best way to find out is to replace it with another speaker (for example front left or right) and plug it into Center jack on the back of the subwoofer (or decoder). Play some music and find out if the speaker is working. Also if you have a Creative sound card run a channel test (in Surround Mixer or Speaker Settings).
Let me know what you've find out. Good luck.

Gf4MX440-VTP TV-Out doesnt work.

I've just buyed a dual gf4 mx440 with 64Mb and TV-Out, TV-In.
When I installed it I began working with two monitors witout problems, but when I've tried to connect de TV-Out, it doesnt word.
I've checked a hundred times the cable connecting, and it's ok because with my old graphic card I could.
I tried to upgrade the BIOS with an unofficial version and it didn't work, I downdated to the original version of BIOS again.
The graphic card detects the TV because it enables the TV-Out option in the configuration, but when I enable it I get a strange screen of one color on TV. The TV get's of a color brown or orange or something like that and I can't see nothing.
I've selected my country format (Pal/B, Pal/G). I've also tried all other formats whitout any result.
I'm running Windows 2000 Sp3
My motherboard is a DFI AD70-SC (With AGP 4x)
AMD Athlon XP 1.500
512Mb DDR RAM
I've tried all but it doesnt work.
Thank you very much.

Dunno if this thread is still going, but I figured why not
Well, I bought the GF4-mx440 VTP (8866) back in october, but haven't actually gotten around to testing it until last night, and I ran into the same issues.
For reference, the drivers on my cd are 30.00.
It was quite frustrating, but I did a ton of research and here is what I was able to find out. THis information isn't terribly organized, but bear with me because it's hopefully useful
TV-out on nvidia cards is not as simple as some may say. (Ie. all those who say nvidia has way better drivers than ati ).
Different detonator versions have WIDELY varying tvout support. In Some versions it works, some it works well, some it works poorly and others it doesn't work at all. Quite shocking, but sadly this is true.
Bits of info about the MSI-mx440 vtp itself. The tv out is based on a Seperate chip, the Phillips 7108. This chip handles the tv in and out features. (Geforce4 chips have themselves an "on chip" solution for tvout. But typically when manufactures use a Video In chip, you let that chip handle video out also).
Regarding the 440's bios. There is only one version (as listed through the live update running win9x). HOWEVER there are issues with this card and WinXP, to which the fix is to apply a bios update. I have not tried liveupdate on winxp (I run 98se), but I think that this bios update is only available upon special request to MSI. I'm not sure how it affects the situation(s) under win9x, but supposedly it fixes some winxp issues. (I will be installing XP in a dual boot config shortly, so I'l know for sure soon ). So according to the MSI support FAQ's, there is a bios update to address issues in winXP, that you can only get through special request (assuming you have winxp). I am not sure what the affects would be on win9x system, but since I am giong to dual boot soon, I'll probably have to apply the new bios and find out.
Okay, so how to find out if it's a software (driver) problem, or if it's hardware (a broken card that you can return). Here's what you do:
Unplug all monitors (vga connections) and plug in the TV out (I dont' have any s-vidoe tv's, so I just use the composite (RCA) jack) to a tv, and make sure the tv is on. Now boot your computer.
If you get output to the tv (usually the post info from the motherboard, followed by the win98 startup screen) this means your hardware works fine. (This is what happened to me). Strangely, it made it all the way into windows (on the tv), but typically what happens is that once windows loads you end up with the messed up pinkish brown screen. (I've never been able to have it boot into windows on the tv since then, heh).
SO if you do get picture during startup (before the os loads) then it means your card is fine, and it's a driver issue.
*Note: One thing I've noticed is that your tv-output is affected by which VGA out port you put your monitor on. For me, when booting with both connected (vga and tvout) if it's plugged into one socket, I see both monitor and tv, if it's plugged into the other socket, I don't see tv at boot. Not a big issue, but worth noting*
Okay, so now if you did see otuput on the tv during boot (before windows), you know your hardware is working. So you have to find a driver version that works for you. I'm going to list my own experiences.
MY cd came with the 30.00 MSI drivers. These gave me that icky pinkish brown flickering screen. Tv-out didnt' work with them. Tried the 31.00 MSI drivers, same thing. This was odd I thought, as the two most recent MSI drivers didn't work. So I tried the MSI 28.90 drivers, same thing with them too.
Finally I tried the MSI 27.20 drivers, and voilla, tv out worked! I was able to extend the desktop, and clone it, was even able to tape a downloaded episode of 24 on my vcr .
Of course using year old drivers is less than ideal (especially for 3d gamming). However, these are the ONLY MSI drivers that have tvout working.
I decided to move on to the nvidia detonator reference drivers, ideally you'd stick with the manufacture MSI, but what can you do. Here is what I have found so far:
27.20 MSI - Works with tv out
27.20 Nvidia - Works with tv out
27.30 Nvidia - This one is interesting, tv out works in extended desktop mode. BUT there is no tab in the options for cloning (the 'nview' tab is missing). So you can't clone, or overlay, only the extended desktop. So it's an "extended desktop only" driver.
27.42 Nvidia - Works with tv out (works same as 27.20s)
28.90 MSI - NO tv out
30.00 MSI - No tv out
31.00 MSI - No tv out
30.82 - Most resent 41.09 Nvidia - Tried them all, no tv out for any of them.
I have yet to try all the 28-29 nvidia reference drivers, so dunno if tvout works with them.
So what does this all mean? FIrst off, check if your cards hardware works (boot only with tv on and tvout connected, NO VGA). If your hardware works, then you have to find drivers that work with tvout. Give the ones that worked for me a shot, see if they work for you. (I typically plug in my vga and tvout at same time, so a see the POST in BOTH of them. Boot the computer with everything on, and then go to the settings and try to enable tvout).
This situation is less than ideal of course. It looks like you have to pick your drivers based on 3d performance, or tvout. But not both! Either use the most recent drivers for the best 3d support (but no tvout!), or 1yr old drivers for tv-out, but not the best 3d support. I'm an avid gamer personally, so this situation sucks.
What I find odd, is that MSI's own drivers (28.90, 30.00, 31.00) have these issues. They are privy to the peculiarities of the MSI cards, so they should be able to address it.
What the pattern (some drivers work, others don't) suggests to me is that MSI cards aren't fully compatible with the reference design. Possibly an issue with the bios.
I will try and get a hold of the bios update for the WinXp issue, and see how that affects the situation in win98se.
Hopefully this was helpful
(For reference, my system:
AMD xp1700, 256-DDR Kingston - Samsung chips, ECS k7s5a MB, seagate barracuda IV 40gb HD, LG 40x cdrw, onboard ac97 sound + lan, Usb keyboard + usb mouse).
Aggies

Straming video doesnt work.

Streaming video doesnt work. Video in Skype is OK. Play locally stored video OK in MediaPlayer as well as iTunes. Downloaded Adobe Flash and Shockwave. Still no steraming after restart of PC.
Firefox is upgraded.
Windows XP home

Hi,
Can you please cross check the following :
1. The rtmp URL is edited accordingly to point to the correct FMS server instead of localhost etc.
2. The above code snippet should be bundled as an AIR app and published for iOS.
If you are using HTTP instead of RTMP, you need to follow HLS streaming for iOS which makes use of the HTML5 video tags instead of any flash/AIR based applications. Please let us know if you are looking for this.
Thank you !

MSI GF4 Ti-4200 doesnt work with WindowsXP

I can't get the MSI display tools to work - it crashes,
the vbios.dll doesnt load, it also crashes.
the tv in doesnt work ,it crashes
the tv out doesnt work ,it crashes.
all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
what's the deal with this stuff? ?(
I have a Dual AMD athlon Tyan thunder k7 motherboard,
MSI Ti-4200-VTD video card and MSI tv anywhere card.
is there any resolution for this?

I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
If the answer is YES, then I will begin investigating why my system can't.
If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
If you would REALLY like my system details, here ya go...
========================================
CASE - ANTEC SX1000II with 4 internal 8cm fans
POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
BIOS - AMI Ver 3.2 (10/21/02)
PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
DRIVER: MSI 31.00
CAPTURE DRIVER - nVidia 1.08
SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
DRIVER - Creative 3.0.0.18 9/20/02
SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
DRIVER - MS 5.1.2535.0 7/1/01
SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
DRIVER - REALTEK RTL8139 5.396.0530.2001
SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
DRIVER - Adaptec 6.2.0.0 3/19/2002
SLOT 4 - EMPTY
SLOT 5 - MSI SYSTEM D-Bracket
SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
DRIVER - Windows XP Pro native driver
NOTE:
NIC #1 is for home LAN
NIC #2 is for Alcatel SpeedTouch External DSL modem
SCSI DRIVES:
ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
ID 2 - Seagate ST39103LW, 9G, 10K RPM
ID 3 - Plextor CD-RW PX-W1219S
ID 4 - Toshiba DVD-ROM SD-M1201
ID 5 - EPSON Perfection 1640SU Flatbed Scanner
ATA/ATAPI DRIVES:
Primary Master - No Connection
Primary Slave - No Connection
Secondary Master - MATSHITA LS-120 Ver F523
Secondary Slave - No Connection
USB DEVICES:
DIAMOND SupraMAX 56K V.92 Model:SUP2920
Generic Flash Memory programmer and other assorted USB devices on occasion.
MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
========================================
BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
Now, this is just my opinion and may not reflect the feelings of the more sane people around me.
Cheers!

I/O Drive doesnt work on my X-Fi Platin

Hi, i just received my new X-Fi Platinum and installed the X-Fi.
Works perfectly, then i installed the I/O Dri've, connected it to the X-Fi with the Cable and connected the Power Jack.
If i plug in a Headphone, it cracks a little bit, so it must have Power. But i dont hear anything at all, it doesnt work. Tried different Speaker Settings (or switched to "Headphones") and plugged in my Mic at the Mic2 Input on the I/O Dri've. Doesnt work too and the SPDIF Out doesnt work....
After i crawled through these forums i read, that for the Mic2 Input i should switch at the mixer the record input source to mic2. But there is no mic2 on the mixer if i switch to record sources.
WTF?!
got an asus a8n-sli and im using windows XP with the latest patches/service pack.

the optical SPDIF output is lighting red and if i plug in my headphones, it cracks a little bit. so it should have power.
there is no switch at the front of the i/o dri've to change between line2 and mic2 ?!
i turned the microphone level input to the max, doesnt work.
in the audio mixer, i can choose between different stuff and microphone, but there is no mic2 and just microphone doesnt work. even in the windows mixer there is no mic2 or option to choose mic2.
so i dont know why the front panel doesnt work, even with headphones or SPDIF coaxial out. the cable is plugged in at both edges, on the soundcard and on the I/O dri've and as i described above, the i/o dri've seems to have power.

My facetime doesnt work. If I call somone they see I call but when they accept it doesnt work and when they call me the green camera light turns on but no sound or pop up of the video chat screen appears, please help! Macbook pro user. MacBook Pro, OS X M

My facetime doesnt work. If I call somone they see I call but when they accept it doesnt work and when they call me the green camera light turns on but no sound or pop up of the video chat screen appears, please help! Macbook pro user.
MacBook Pro, OS X Mountain Lion

I just wanted to follow this up by saying that you were entirely correct in your diagnosis of the situation. My computer did have the faulty part you linked to. I brought my laptop in and specifically told them to run that test, had it fail and then argued with the person at the genius bar and the manager. Eventually they offered to have it sent out and have everything replaced for free of charge. They did so mainly because I had complained about graphical issues almost every other time I had come in with problems and no one ran the test. They should have caught this problem during my warranty, but they didn't, even though I mentioned the problem.
Anyhow, after having the part replaced, I haven't had my computer crash a single time since, or had many of the issues mentioned above. I've never had this experience before. Even brand new, I got occasional crashes. Hopefully this new trend continues.
I do find that web browsing is still incredibly slow. Web browsers just chug along at a slow pace, even though I have great internet speed. Maybe I'll try just deleting my web browsers and reinstalling them...
Anyhow, thank you for your help and knowledge Clinton.

I have just changed my password on googlemail on my computer and it has immediately locked me out of my emails on my phone and my new password now doesnt work either! i need to see my emails for work! someone please help!

Please can someone help me?
I have just changed my password on my work computer on gmail but my phonehas locked out of my emails now and will not accept my new password. it keeps telling me my username or password is incorrect. I have tried deleting entire email account and setting it up again but still doesnt work!
Im out of options and step by step on apple is rubbish!!

Ive also looked into other comments people have made about this and they are saying if you go into your account and go to incoming mail server you can change the password there but I cant find that anywhere. it only says outgoing mail server.
could this be the problem? have i deleted this?

HT1212 if you cannot remember passcode you selected and get locked out of iphone 4 and it says to connect to itunes and it doesnt work what can you do to have use of your phone again?????

Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot

iOS: Forgotten passcode or device disabled after entering wrong passcode

Video out stopped working with 10.4.6 update

Hi, i've just installed the 10.4.6 update and now i have no video out.
i have a video connected to the adc to s vhs connector. now when i start up my monitor starts up as the second display, and i have to put my computer to sleep and then wake it up and the monitor is reset to the main display.
is there anyway i can reset something, cause it seems like it's remember previous settings or something.
HELP!
if i disconnect the adc to s vhs adapter then it is all fine.

7 hours later and i finally get it working again.
i have no idea why this happened, but somehow the menu bar got switched to the tv display. at the same time as this my video stopped working properly. so that was half the problem.
then it took ages to reconfigure switch res, but i finally did it.
for some reason my g5 doesn't want to know about using a tv as a 2nd display, until......UNTIL!!!! you rotate the display in the display preference by 90 degrees. then all of a sudden it comes on, and you can rotate it back to normal.
why oh why this happens only apple knows. it's like a secret door into the wonderful world of dual displays.
sort it out apple.

HT1454 iPhone 4s video out not working with AV cable

I have an iPhone 4s with ios 6.0. I recently bought the apple composite AV cable from an apply store. Unfortunate when I connect it to my tv all I get is sound. I've search for tv out settings but I can't seem to find them. Any suggestions?

im running ios 6.1.3 but have been having this problem for a while at least 2 earlier versions.I have an iphone 4s as do 2 of my work colleagues one running on the same as me and the other slightly earlier but not sure. I have a docking device that has an av out and also an iphone adater to composite av.and also vuzix wrap that supports iphone My phone doesnt work with any and i can recall starting to have problems first with the docking device which became temperamental and then wouldnt work at all.both my mates phones work with it and the glasses.My kids ipad 2s work with the composite lead and the glasses- dont fit the dock obviously ,my iphone 3 runs on all.i can only think that at some point the internals of my iphone 4s may have become damaged hence the intermittant problems with the dock at first ,and maybe its the 30 pin plug could it be that whichever of the pins carry the av signal have become damaged in some way posible dampness ,but im going to have it changed as it seems like a likey possibility.I can say one thing it was nothing to do with the software version ,nor any other device or lead.Also what i thought might be the internal 30 pin plug is i dont get a message l anymore saying the "accessory is not compatible with this iphone"therefore i dont think the phone knows theres a plug in so for the av out pins anyway as it charges up fine

Video Out not working on Ipod Classic 80gb

I can't get video out to work on anything. I have a relatively new Onkyo home theater with an iPod dock that has video out cables, and I can't get a picture to show up on the TV. Also, my gym has StarTrac cardio equipment which has video connectivity through a built-in iPod dock. Video is supposed to show up on the TV monitor attached to the cardio machines, but all I get is "no signal".
Since I can't get either of them to work, is something wrong with my iPod?
Thanks!

When you want to show the video on your TV, have you selected TV out in the video settings options?
If that's not the problem, check this page, http://support.apple.com/kb/HT1454 to ensure you have the correct cable for your iPod, although you need to ensure you have identified your iPod model correctly. Check http://support.apple.com/kb/HT1353 if you're not sure because there is a crucial difference between the Classic and the 5th generation video models. (On the *iPod and iPhone: TV out support* page - http://support.apple.com/kb/HT1454 - look at the third table down, headed *Apple Component AV Cable with iPod Universal Dock or Apple Universal Dock* .) Notice that the Apple Universal Dock and Component cable combination works for an iPod Classic, but not for the 5th gen iPod. My point being; if the STarTrac device you mention has a built-in dock, perhaps it's designed for the iPod Classic, but if you have the 5th gen, it won't work.
... and no, I don't know why one dock is called the Apple Universal Dock, while the other is called iPod Universal Dock! Such a similar naming convention only leads to confusion. I know, I had to examine each box in my local store to find the iPod dock among all the Apple docks they had since they thought both docks were identical.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points

I have a MacBookPro. When try to do a video call on facebook. The video camra doesnt work. the screen breaks and you can only hear some things. I update adobe flash so it has the latest verion. do u know wat going on ?

i have a mac pro. when i try to connet to a vedio call. the call doesnt connet. the person on the other side can see me but i cant see them. i updated the new version for adobe flash. but the camra stiil doesnt work.

You might want to see if the following article helps you:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Hope this helps

TV-out doesnt work S-Video ---- Scart !

Similar Messages

Maybe you are looking for