"TV Out Enabled: Please Connect Video Accessory"

I tried connecting my iPod Classic 80Gb v1.1.1 to a Philips DCP750/37 but after setting all the required configuration a message that says, "TV Out Enabled: Please Connect Video Accessory" appeared on my iPod. I think it is an incompatibility problem. Any work around on this issue?

Unfortunately this is one of the downfalls of the Classic. It only works with select apple "branded" video out accessories. This is the 5th gen forum too btw.

Similar Messages

IPOD 80GB displays "TV out enabled" please connect video accessory

I have had my ipod for about two years...have used the original ipod composite cord for watching videos...no problems until the other day....keep getting same message...."TV out enabled" please connect video accessory I have purchased two different cords adn the same message keeps appearing, HELP!

alandoc wrote:
I've got a similar problem 120gb Classic - composite cable (30 pin) has worked in the past but not anymore. It isn't a cable problem as it works on a 30 gb with no problem.
Exactly the same problem for me too: 30GB ipod classic (model MA444FB) shows video on TV fine, 80GB (model MB147) displays the 'please connect video accessory' message and doesn't show video. Also ipod touch (model MB 531BT) doesn't display video on TV. All 3 ipods play audio without problems. All have uptodate software. The AV cable is the one that plugs into the earphone jack on the ipod, part number is M9765G/B.
I notice noone's responded to the previous posts on this thread yet - be nice to get some expert advice before I go out and spend £35 on a new composite cable.

What does "TV Out Enabled Please Connect Video Accessory" mean?

I just loaded some video podcasts on my new (apple refurbished) 80gig classic ipod and when I go to play the video podcast on my ipod I get the error message "TV out Enabled please connect video accessory". I don't want to watch on a TV, just on my ipod. thanks so much for help!

I found the answer by searching "tv out enabled" - thanks to the person that answered this. Have to go into videos - settings - and then turn tv out to off.
awesome

TS1409 TV Out Enabled: Please Connect Video Accessory

Anyone know how to get around this little gem ???

Head to Videos -> Settings -> TV Out -> Off.
B-rock

"Please Connect Video Accessory" help??

Hello!
So I bought a Sonic Impact Video 55 player, after carefully researching to ensure that it would be compatible with my 3rd gen nano. I did everything that I was supposed to do, and I still can't get my nano to recognize it.
It'll play music just fine. But when I try to get it to play a video, it tells me to "please connect a video accessory". It may be worth pointing out, that I get the same reaction when I try to hook my ipod up to the tv.
Any clues at all? Thanks!

Did your careful research happen to include the official site (http://www.si5.com/support_newnano.php)?
It says it won't work, which isn't that surprising, considering the V55 is older than the nano.

Nano 5th g "TV Out enabled"

I have a Nano 5G that is several years old that I use with my Honda Fit integrated cable, an Apple Brand composite RCA cable to watch videos on my TV and the video output on the treadmills at my gym (I cannot verify that those are apple brand or not )
I recently switched PCs from XP to Windows 7. I deauthorized on xp machine first . After synching with the Windows 7 machine, with the latest version of Itunes, my accessories will no longer work.
The Nano will charge in the Honda, but not play through integrated cable (can still use headphone in aux port) .
When I try and play a video on the TV I get "TV OUT ENABLED, PLEASE CONNECT VIDEO ACCESSORY"
video settings as follows:
TV out enabled = yes
TV Signal = PAL
TV screen = standard
Again, the variable is the windows 7 itunes - the accessories worked prior to that, and the RCA is the composite cable with the apple brand connector on one side, with three cables branching out with 3 RCA plugs.
Firmware version = 1.0.2
Itunes 10.6.3.25 on windows 7

I got the same message.
Turn on your nano.
Go to Videos
In Videos, scroll down to Settings
At the top of the list you will see TV Out
To the right of TV out it will say either on or off
If it is on, click on the wheel at 9 o'clock (pointing left) to turn it off
That should do it, no problem
Once I turn it off my movies play perfectly

TV out enabled

I have now managed to convince my iPod to allow me to download a podcast. This was not an easy negotiation.
But the problem is that my iPod has decided that I may not look at these podcasts, or any other videos on the iPod itself. They play just fine out of iTunes, but the iPod feels that I should output them to a TV. It says "TV Out enabled. Please Connect Video Accessory". I feel that my IPod is just not being reasonable. I should be allowed to view videos on the iPod itself without it giving me a really bad attitude. Any suggestions?

Last night, the little bugger decided to go into a weird hibernation mode where it did nothing and no enticement could get it to respond to any input.
I figured I could reboot the crap out of it with the hold-toggle-menu-centre trick. This worked, and got me back inot viewing the videos just fine.
Two questions remain: 1. Why did the the precious little thing decide to change its video settings in the first place? 2. Why is it that Apple cannot provide a help file that is actually helpful?

TS1409 what is a video accessory exactly is it the usb wire? i connected it to my computer but nothing seems to have changed.

i connected my ipod to my computer and found a symbol and message on the screen shortly after saying tv out enabled connect video accessory wire but im not sure what a video accessoriy wire is, is it the USB?

It means that TV Out is enabled in the settings. Head to Videos -> Video Settings -> TV Out and make sure it is set to Off.
B-rock

Upgrade to Lion broke iMovie 08 - iSight Camera - No camera connected - To import video, please connect a camera - error message

I recently upgraded to OSX Lion. My MackBoo Pro is fully patched and updated. I can launch iMovie 08 but when i try to record or import video from camera it get the error message. No Camera Connected - To import video, please connect a camera.
All my other applications work fine with iSight including iChat, Skype, PhotoBooth. So why would a specific upgrade to Lion break iMovie 08?
I looked at the other posts on this topic and no one has a really solid explination or fix.
help please!!

lonestarry wrote: ... There is no edit link for the MBP details (below my avatar image) I can edit all my other products, but the link for the MBP is missing...odd
That is odd. When logged into Discussions, the Profile tab on my personal Apple Support Communities > People page includes the following screen-shot from immediately below the big avatar picture:
Clicking on the "Edit" link opens the dialog window shown in this screen-shot:
The choices bar lets you correct your OS. Update saves the info.
If yours does not work this way, try a different browser. (These screen shots are made using Safari on my Mac.)
lonestarry wrote: ... Looks like I will have to dig out my ... iLife 08 ... I dont remember ever having an iLife disc, just the OSX disc.
If you want to fix your problem, it is time to reinstall and updated to the most current iMovie '08 version.
If you did not buy iLife '08 separately, perhaps it was included in the Software Applications disk(s) that came with your Mac.
lonestarry wrote: ... a colleague ... has the exact same issue...
Has your colleague reinstalled and updated iLife after upgrading to Lion?
I am using iMovie '11 (version 9.0.4), so I cannot test your specific version. iMovie 9.0.4 is properly working for me after I restarted it one time.
However, depending on individual system configurations, Lion compatibility may be version dependent. For example, this forum post contains reports of iLife '08 (and even older) working with Lion. Moreover, as shown in this screen-shot from the roaringapps listing, it is the newer versions that may have problems:
Your version 7.1.4 should work with no trouble if all your Apple software is up to date.
Message was edited by: EZ Jim
Mac OSX 10.7.4

Fatal1ty / Front Panel HD Audio - please help me figure out how to connect!

Please help!
I bought a SB X-Fi Titanium Fatalty Pro card and I can't for the life of me figure out how to connect to front panel audio!
My motherboard audio has an HD Audio connector, is there a way to enable routing the sound through that?
If I can't get the case's front?panel?working at all?then I need some kind of super long headphone wires or something!

Check your online manual (it's in the Creative folder in Start Menu).
There should be a schematics like this: (mine is in portuguese).
Conector de áudio do cabeçote do painel frontal
Compatibilidade de conexão
Somente padrão Intel HD Front Panel Audio.
Não compat*vel com AC97 ou HD Front Panel Audio compat*vel com Intel
Configuração de Pin
Pin
Nome do sinal
Descrição
1
PORT 1L
Porta analógica 1 - canal esquerdo (Microfone)
2
GND
Aterramento
3
PORT 1R
Porta analógica 1 - canal direito (Microfone)
4
PRESENCE#
Sinal baixo ativo que sinaliza ao BIOS que um dongle Intel HD Audio está conectado ao cabeçote analógico. PRESENCE# = 0 quando um dongle Intel HD Audio está conectado
5
PORT 2R
Porta analógica 2 - canal direito (Fone de ouvido)
6
SENSE1_RETURN
Retorno de detecção de conexão para o painel frontal (JACK1)
7
SENSE_SEND
Linha do sensor de detecção de conexão da rede de resistores de detecção de conexão CODEC Intel HD Audio
8
KEY
Chave do conector
9
PORT 2L
Porta analógica 2 - canal esquerdo (Fone de ouvido)
10
SENSE2_RETURN
Retorno de detecção de conexão para o painel frontal (JACK2)

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

Satellite laptop: connecting video out to projector causes hum in (headset) audio output

Our church connects video output from the laptop to a projection system and audio out (via headset jack) to a sound board mono channel (line in). Stereo to mono adapter. We get a significant hum in the audio whenever the video cable is plugged in. Doesn't matter whether the attached projection equipment is on or off, it's all about plugging the video cable into the laptop. Unplug the video cable and the hum disappears. Obviously we have tried all sorts of things to isolate the problem but it all comes back to plugging in that video cable. We made sure there were no nearby power supplies or other equipment that might throw out interference. Has anyone ever encountered this problem and have any suggestions? Thanks in advance for any help you can offer.

Using a Satellite PSBY1U laptop. Video out is not HDMI but the other (VGA?) connector. We are connecting audio out from the headset jack direct to a mixer channel. No microphone is connected to the laptop. We looked at every sound and video-related menu we could find and could not see any settings that would seem to be relevant to the problem (we changed lots of settings anyway and nothing helped). Naturally we played with audio volumes, different auto cables, etc. Bottom line is we get clean audio until we plug the video cable into the laptop, then we get a very prominent hum from the audio output. Video cable goes straight to a projector, doesn't matter whether the projector is turned on or off. The audio and video cables are never closer than four inches from each other. It's weird.

Timed out Unable to connect to facebook. Please checkt your internet

Hi I have a problem to log to my facebook app from my ipad and iphone
:Timed out Unable to connect to facebook. Please checkt your internet...
My internet is fine
facebook works on safari browser
and I can log to my facebook app in my freind wi fi
why its not working in my wifi

Here's my PC info.
I cleared the following data from my Chrome browser
I disabled my entire firewall
I ran the Creative Cloud Cleaner Tool, with my browser closed. I chose option 3 followed by option 1. This screenshot is just for reference.
After all of that, I re-installed Creative Cloud with a brand-new download of the installer. It installed fine, no errors and auto-launched. Made sure my firewall was disabled before signing in.
And in the end, this is what I got.

Out of range output video size ?

Hello,
I would like to use a camera which has a large output size, more than 1920x1080.
When I select the camera, I've a message :
Out of range output video size
One or more output video width and height are out of range. Please provide video size in range 80x60 to 1920x1080.
Is it a limitation of FMLE or FMS ? (I think it's FMLE because the message appears even if the "save to file" is the only publishing format selected)
Is there a way to edit a confugration file to remove this limit ?
Best regards,

why don't you change that background to what you want in desktop system preferences when the second monitor is connected? different monitors have different desktop backgrounds and they remember the settings from the last time they were connected.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

"TV Out Enabled: Please Connect Video Accessory"

Similar Messages

Maybe you are looking for