TV out full function

Hi,
I am tring to use iphone 4 to have movie output to LCDTV.
But it only supports 640x480 on ipod app.
If I use some apps like Oplayer, it supports to HD movie on iphone but not TVout.
I know jailbreak iphone can use "resupported" to free the tvout totally including HD movie , all games on iphone and apps.
Can apple people free this feature?
Or any one knows app that does this but don't have to JB iphone?
Thanks for your attention.
George

Hello Virgiliox,
Its known that the G5 imacs only mirror the display, and hence, if u darken the internal display, the mirrored ext. display will also blank out. To get around this, you can use this:
http://www.rutemoeller.com/mp/ibook/ibook_e.html
Screen spanning Doctor is a little app, that once installed will allow you to use extended desktop. This will allow you to play your movie on the ext monitorseperate to the internal LCD.
Disclaimer Note- this program is not supported by apple, use this at your own risk. I provide this information for your knowledge only.
Cheers
bryza

Similar Messages

HP Envy 5532 Printer - unable to install a driver with full functionality

Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
Any help would be appreciated
Thanks Steve

@Steve_Reeder, welcome to the Community
I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
I will do my best to make some helpful suggestions to you to try out.
It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
Another idea would be to run the System File Checker to see if this scan will pick up any issues:
Using System File Checker to Restore System Files
Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
I hope to hear from you, enjoy your Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Trial version not full functioning?

To ry out some features, I follwed the tutorial video for using the healing brush to remove objects from a photo - in my case two people from a group photo. I selected "Expert", then the spot healing brush, brush size 20px. Content-Aware was selected. But when I tried to paint the objects to be removed, it did not work. All I got was a + and not the paint brush. Is the trial version not a full functioning program?

The trial version is the same as the purchased version.
Have you tried content aware move?
It's the tool bottom left in the tools pallet in expert mode.

Full Function GPS

I'm looking for a full function GPS, not just google or BB maps, for my Z30. Something that displays functions like ground speed, direction, traffic, speed zones etc. Is there such an app for the Z30?
Thanks,
Mark.

Hi and Welcome to the Community!
There are many....each with different things to satisfy different audiences. I recommend you try them all out so as to determine the one that best meets your specific needs.
For me, Waze is the best . It doesn't have speed zones (that's a very tricky thing for any app to provide), but it does provide the rest of what you ask for, and is based on true "crowd sourcing" from other Waze users. It has gotten me around quite a number of issues that I otherwise would have been stuck in.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I erroneously deleted some background icons, that now have left me with only thumbnail images, what appears when I want to enlarge is a grey circle containing a black exclamation symbol, how can I get back full function and undo my mistake

I have erroneoulsy deleted icons repetious images from the computer which then affected my iphoto images, leaving me in some cases only with the thembnail image. When I try to enlarge or perform any other function all that appears is a black field containing a grey circle with a black exclamation symbol( !)
within it. How to I get back full function of these affected images and undo my goof up. I have tried restore, but my attempts have not proved successful.
Help !!!
silvercoho

What exactly did you do to delete these?
How did you try to "restore" and what did you try to restore?
Probably the only solution is to restore your backup of the iPhoto library from before you did this
LN

I am using Windows 7 64-bit on a partitioned hard drive on a MacAir. The trackpad will only work with a click. How do I get the full function of tap and scroll?

I am using Windows 7, 64-bit on a partitioned hard drive on a 2012 MacAir. The trackpad only works with clicking. How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

Windows Control Panel>Boot Camp Control Panel>Trackpad.

Error message after clicked the SRM "Full Functionality" tab

Hi, SRM gurus,
After I logon to SRM and clicked on the "Full Functionality" tab, I immediately got the following error message.
Short Text of the Message: Object type SCH is not supported
URL: http://augustus.corp.bcm.tmc.edu:1080/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Path: /sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Message ID: BS
Message Type: E
Message No.: 018
Message Variable 1: SCH
Message Variable 2:
Message Variable 3:
Message Variable 4:
Error Code: 560
Error Text: ERROR_MESSAGE_STATE
Runtime Error: Object type SCH is not supported
ABAP Call Stack: Method: CREATE_SC_INT of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CREATE_NEW_INSTANCE of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CONSTRUCTOR of program /SAPSRM/CL_CH_WD_BOM_SC=======CP
I had no problem at other tabs like "Order Status", "Advance Search".
Where should I look to resolve the issue?
Thanks in advance!
Best regards,
Fisher Li

...SRM and clicked on the "Full Functionality" tab...
I have never seen this tab. Is it a custom tab? In any case, by looking at your error message, I suspect somewhere in your iView definition, the object type is mistaken. Instead of "SCH", it most likely should be "SHC", which is the default process type for shopping cart.

Cannot use Read Out Loud function in MS Vista

I have not be able to use the Read Out Loud function of Adobe Reader since I got Vista. I have recently written a book and I want others to be able listen to the book in PDF format but they cannot. A good friend of my sister is legally blind and wanted to know if I had an audio version for her so I asked her if she had Adobe Reader and she said she did. So I then asked if she had MS Vista OS but she is not sure. If she does she and other who have Vista and any version of Adobe Readerwill not be able to use the Read Out Loud function as far as I know. Any ideas as what the issue can be? I have had Vista tell me it was some kind of security violation and I tried to exempt it but Vista would not let me. Here is the error output from today "Faulting application AcroRd32.exe, version 9.3.3.177, time stamp 0x4c1d77af, faulting module lhcom02W.dll, version 2.13.0.0, time stamp 0x3cfc8155, exception code 0xc0000005, fault offset 0x00018818, process id 0xeac, application start time 0x01cb4798dc61d030." I have 9.3.3.4 but previous version still did not work either. I was hoping the latest update would have worked. signed: Frustrated and Disappointed in Indiana

By changing my preferences in Adobe Reader (Edit/Preferences/ Reading) from the default, it seemed to kick the function into action! The volume is still very low, though, even though all the volume slide controls are on max.
But progress anyway!

Left outer join functions like simple join

I created two views SCO_REQGROSSLINES_V & SCO_REQLINESCOMPLETE on Oracle requisitions base tables. Our business rules enforce the following identity: the number of gross requisition lines will always be greater than or equal to the number of requisition lines complete. (By complete I mean delivered.)
Each view has a key named DATESUBINV_KEY constructed of a transaction date and the subinventory code using this logic:
, TO_CHAR(TRUNC(transaction_date),'YYYYMMDD') || subinventory_code
On 03-SEP-2010 a user created a requisition with one line item for material from the HEAT subinventory which was not delivered. This row is retuned in the result set when I query on SCO_REQGROSSLINES_V but is NOT returned when I query on SCO_REQLINESCOMPLETE. So far so good.
When I issue either of the the following left outer joins I do not get the row for the row for the HEAT subinventory on 03-SEP-2010:
select rgl.trxn_date
, rgl.subinventory
, rgl.line_count gross_line_count
, rgl.ext_prc gross_value
, rlc.line_count lines_filled
, rlc.ext_prc lines_filled_value
from SCO_REQGROSSLINES_V rgl left outer join sco_reqlinescomplete_v rlc
ON rgl.datesubinv_key = rlc.datesubinv_key
where rgl.TRXN_DATE BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
and rlc.trxn_date BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
order by rgl.trxn_date, rgl.subinventory
select rgl.trxn_date, rgl.subinventory
, rgl.line_count gross_line_count
, rgl.ext_prc gross_value
, rlc.line_count lines_filled
, rlc.ext_prc lines_filled_value
from SCO_REQGROSSLINES_V rgl
, sco_reqlinescomplete_v rlc
where rgl.TRXN_DATE BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
and rlc.trxn_date BETWEEN to_date('29-AUG-2010') AND to_date('04-SEP-2010')
AND rgl.datesubinv_key = rlc.datesubinv_key(+)
order by rgl.trxn_date, rgl.subinventory
Question: Why would the left outer joins function as a simple join on DATESUBINV_KEY? Do keys on views function differently than keys defined in the data dictionary? If they do how can I make these keys to function like data dictionary keys?

Hi,
The WHERE clause is applied after the outer join is completed. In your example, rows from rgl will be in the result set even if they have no match in rlc. In those cases, all the columns from rlc will be NULL.
Okay, so you have these rows that contain data from rgl but NULLs where the data from rlc was supposed to go. Now it's time to start the WHERE clause. You then apply conditions like this in the WHERE clause:
AND     rlc.trxn_date BETWEEN ...NULL is between anything, so the row that the outer join prodeuced is rejected.
All conditions involivn columns from rlc probably need to be part of the join condition, not the WHERE clause.
For example, in you first query the FROM and WHERE clauses might be:
FROM          sco_reqgrosslines_v      rgl
LEFT OUTER JOIN sco_reqlinescomplete_v rlc ON    rgl.datesubinv_key   = rlc.datesubinv_key
                                        AND   rlc.trxn_date       BETWEEN TO_DATE ( '29-AUG-2010'
                                                                    , 'DD-MON-YYYY'
                                              AND       TO_DATE ( '04-SEP-2010'
                                                          , 'DD-MON-YYYY'
WHERE   rgl.trxn_date     BETWEEN TO_DATE ( '29-AUG-2010'
                         , 'DD-MON-YYYY'
               AND     TO_DATE ( '04-SEP-2010'
                         , 'DD-MON-YYYY'
                         )Always use (at least) two arguments when calling TO_DATE.
Conditions that only involve rgl can be in the WHERE clause, but if any conditions from rlc are in the WHERE clause, then the effect will be the same as an inner join.
There no difference between tables and views (or sub-queries) in this regard: the same thing would happen regardless of whether rgl and rlc were really tables or not.

Table to find out the function modules used in a particular program

Hi,
Is there any standard table to find out the function modules used in a particular program?
Such as there is a table D010TAB to find out the tables used in a program .

Hello
There is no exist such table.
But try this snippet:
REPORT ZSEARCH.
PARAMETERS: P_NAME LIKE D010SINF-PROG.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'
     EXPORTING PROGRAM    = P_NAME
     TABLES    INCLUDETAB = INCL.
LOOP AT INCL.
READ REPORT INCL-MASTER INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
REFRESH TMP.
ENDLOOP.
READ REPORT P_NAME INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
LOOP AT PROGTXT.
IF PROGTXT CS 'CALL FUNCTION'.
    SEARCH PROGTXT FOR ''''.
    IF SY-SUBRC = 0.
      DO.
        SHIFT PROGTXT LEFT BY 1 PLACES.
        IF PROGTXT(1) = ''''.
          SHIFT PROGTXT LEFT BY 1 PLACES.
          DO.
            SHIFT PROGTXT RIGHT BY 1 PLACES.
            IF PROGTXT+71(1) = ''''.
              SHIFT PROGTXT RIGHT BY 1 PLACES.
              CONDENSE PROGTXT.
              FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
            ENDIF.
          ENDDO.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
ENDIF.
ENDLOOP.
SORT FUNCT.
LOOP AT FUNCT.
WRITE: FUNCT. NEW-LINE.
ENDLOOP.

Wants to find out customise function module in SAP

Hi all There,
I want to find out Customize Function Module in SAP,
I am not able to find out though SE03.
Pl provide the detail solution
Regards
Sagar

hi,
Custom function module start with Z or Y.So go to table TFDIR and enter z* and y* on input screen field function module name and then check number on entries by pressing tab number of entries on application toolbar.
So number of custom function module = z(number of entries) + y(Number of entries) .
Thanks
Mohit

Regarding finding out Partner function based on Sales Order/Output Type

Hi All,
I have a issue in finding out Partner function[PARVW], Message partner[PARNR], Message transmission medium[NACHA], Teletex number[TELTX], User name[USNAM], Message processed manually[MANUE], Country Key[TLAND] and some other fields all are related to NAST table.
Actually we have one script which is already working when we run from from VA02/03 for single order.
When we execute from VA02/03 all NAST table entries are filled up and by using those entries we are fetching remaining entries and displaying them in Output.
Now we are developing another program where we will have a selection screen with Sales order, Output Type & Order Type and execute the program and then we will get list of sales orders in ALV list output with check boxes before every record.
Now if we select one (or) multiple records from there and click on Print Prevview button i am calling above SAP Script Print Program but now in that P.Program we will not have any NAST table entries other than Sales Order and Output Type those can be moved to [NAST-OBJKY, NAST-KSCHL].
But here what about other fields in NAST table like PARVW, PARNR, NACHA, TELTX, USNAM, MANUE, TLAND etc.
How can we get them as we are exclusively using those other NAST table entries in above SCRIPT/Print Program.
Can anybody solve this issue!
Thanks in advance.
Thanks & Regards,
Prasad.

Check this FM
WFMC_MESSAGES_SELECT
example
tables : nase.
constants: appl like nase-kappl value 'V2'.
select-options:
rg_nacha for nase-nacha default '1',
rg_kschl for nase-kschl.
ranges: rg_objky for nast-objky.
data:
msgs_1 like msg0 occurs 100 with header line.
*-Fill Object Key
*-Execute fm
call function 'WFMC_MESSAGES_SELECT'
 exporting
 pi_application = appl
 pi_processing = '1'
 tables
 ri_medium = rg_nacha
 ri_type = rg_kschl
 ri_object = rg_objky
 tx_messages = msgs_1.

Time Zone Conversion with out using function and with out alter

Hi All,
I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
Thank you Very Much.

Hi,
you need to set time zone in your session, let's do an example :
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS';
CREATE TABLE USERA.T
SDATE       DATE                              DEFAULT sysdate,
WITHOUT_TZ TIMESTAMP(6)                      DEFAULT sysdate,
WITH_TZ     TIMESTAMP(6) WITH TIME ZONE       DEFAULT sysdate,
WITH_LZ     TIMESTAMP(6) WITH LOCAL TIME ZONE DEFAULT sysdate
insert into USERA.T(sdate) values(sysdate);
commit;
select * from USERA.T;
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-11.04.23.000000
SQL> alter session set TIME_ZONE ='-7:0';
Session altered.
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-04.04.23.000000

Out Bound Function Module For IDoc Types CODCMT01

Hi Experts,
Can you please tell me the Out Bound Function Module For IDoc Types CODCMT01,CODCAGN01,PRCDOC01.
Thanks..
Debi.

Hi Debi,
You can use FM MASTER_IDOC_DISTRIBUTE to distribute outbound IDoc CODCMT01, CODCAGN01 and PRCDOC01.
Regards,
Ferry Lianto

How to get Lightroom with full function CC subscription while could not see Lightroom in CC desktop?

I bought a full function CC subscription early this month. Based on what is showing in on line store product description page I should get free Lightroom as well. However, I did not see Lightroom in the app dowload-able list. I had already bought Lightroom 4 and is using it. My main system I installed CC is Mac Pro 4-core Xeon with OS 10.7, 6GB DIMM & 1T HDD.

Jeff,
I did down loaded LR 5 from Adobe CC where is the only location I can down load Adobe app by following instructions from Adobe online store before I bought CC full function subscription. Then I un-installed it by deleting it while I saw it was not showed in my CC desktop after I bought full function subscription and installed CC. I understood the correct way to uninstall Adobe SW is by uninstaller. However, I could not find uninstaller from folder you mentioned or anywhere else (even now, I still can not locate to /application/utilities/Adobe installer, no Adobe installer can be seen in the location you mentioned. I just can find an Installers folder in resource/application support/adobe or application/tool/adobe installers instead, but I could not find any message directly related to Lightroom in Installers but Photoshop from CS3 till Photoshop cc & of course Create Cloud installer) for uninstalling Lightroom 5 then, so I just can simply remove it by delete it. I had ever thought I may have to remove all versions of Lightroom I bought from Adobe in order to let CC to re-allocate Lightroom to CC desktop app list. I finally did not delete all versions of Lightroom for I am currently using Lightroom 4 for developing photos I took in past few weeks including in the wedding of my daughter. I can not sure if I can install Lightroom 4 back after uninstalled it. I should not take this risk so I did not delete Lightroom 2-4 after I deleted Lightroom 5.
從 Fred 的 iPad 傳送
"Jeff A Wright" <[email protected]> 於 2013/8/20 上午12:39 寫道：
<Removed by Moderator>

TV out full function

Similar Messages

Maybe you are looking for