TV-Out only displays text / not graphics

I have a K7N2G-L motherboard with tv-out.
When I try to setup my system to output video through the tv-out encoder I'm unable to select the TV out option under the properties dialog on the desktop for the tv-out encoder.
The manual says I can do this!!!
Why isn't the TV out available for selection???
I'm using WindowsME.
I know the tv-out is working because I can see the BIOS boot screen but as soon as windows switches to graphics mode the tv-out seems to turn off.
Any ideas???
Thank you in advance.
Simon (alias SMack)

hi and welcome to this forum.
right click on the desktop and go to properties and then advanced.
then go to the gfx card.
and then choose clone screen.
that should do it BUT it could be the device you connected it to that dont work.
the computer needs a signal back to know it is attached.
try a vcr or another tv.
i have mine connected to a vcr and it works good.
bye

Similar Messages

  • Cannot text out, only incoming texts but cannot call and Verizon's Chat is not working (I'm in Gabon Africa).  Why?

    Cannot text out, only incoming texts but cannot call and Verizon's Chat is not working (I'm in Gabon Africa).  Why?

    Using iPhone 5 and was able to send and receive texts and calls up top about ten days ago.  Nothing else has changed as far as I know.
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

  • My iTunes Account only displays 1, not 3 security questions. WHY?

    This has been a problem from he#l!!!
    My iTunes account only displays *1*, not 3 security questions.
    I cannot d/l any digital downloads from the external blu-ray combo disks w/downloads, as iTunes is DEMANDING 3 security questions.
    I've been informed that I need to create a "rescue e-mail" --- I've reset my password account over 20 times (at appleid.apple.com) and the system doesn't show a selection for rescue e-mail (I can add multiple alternative e-mail addresses).
    Has anyone else found a solution to this? Does Apple need to effect a master reset to my account????

    It was already unchecked and im not quite sure what you mean by "click-to-drag"
    Also, I can back up my iphone and it will sync genius data. Just not the recent music I downloaded.

  • MSN only displays text. Firefox IE both. Rebooting router/modems corrects the problem for awhile.

    Everything runs great for a few weeks and the right out of the blue MSN home page only displays partial imiages and the rest of the imiages display text only. Rebooting the modem and router and desk top corrects the problem for a couple of weeks. Help.

    Something that only occurs every few weeks is going to be hard to debug.
    Next time it happens, could you try reloading the page bypassing cached pages? You can do that using Ctrl+Shift+r to force a full reload from the server. If that works, then most likely some files in Firefox's cache became corrupted.
    Not sure why you would simultaneously have the same issue in IE, though. Hmmm...

  • Firefox will only zoom text, not the entire page.

    Hi. Recently I was using Youtube and ran into a bit of a problem. When ever I zoom the page it only zooms the text, not the entire page. Ive tested it on other pages like google.com and it workes fine and zooms the whole page. Also, when I use youtube.com. the page works perfectly, but I cant sign in because there are no cookies. Ive also tried uninstalling firefox and deleting the firefox folder but with no luck. This might be because I accidentally pressed CTRL and ? when I was typing as I ment to press shift.

    Reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    Then try logging in ,it might solve the problem.
    Let us know if this solves the issues you are having.
    Thanks!

  • Some webpages (facebook, msn, yahoo) only display text and no graphics.

    I have tried the following that have not worked:
    DNS Cache flush
    Cleared cookies/browsing/internet files, etc.
    Router restart
    Changing computer's time
    Creating new Win7 user account and making administrator
    Reinstalling java/flash
    System restore to an earlier date (but it has come back)
    Change the system time from the internet synchronization tool
    Restarted computer
    Malware bytes scan shows no malware detected.
    Avg scan shows no viruses detected.
    Ran hijack this and found no malicious programs
    The sites work fine on my tablet.

    Hello,
    I am glad to hear that your problem has been resolved.
    If you have not already, please mark this thread as solved by marking the solution.<br>
    This will help other users experiencing similar problems find help faster and more efficiently.
    I hope you continue using our products and thank you for contacting Mozilla Support.

  • Displaying text as graphic

    How is this enabled? There are portions of text I would like to display as graphic to retain the use of fonts and formating.
    Thanks

    DW:
    Most users want to avoid that because it slows down the loading of the page. But if you want to, use a font that is not in the Web safe section of the Font pane. The following page discusses what causes text to be rendered as png: http://homepage.mac.com/hoovmoss/iwebtexttopng.html
    Do you Twango?

  • Facebook only displays text in any browser

    For the last two weeks, whenever I go to Facebook (https://www.facebook.com) all is see is a plain text page with a thumbnail of my profile picture. This happens whether I'm using Safari, Firefox or Chrome, so it's not a browser issue. Facebook still displays fine on my iPhone and iPad, and on other computers. This is driving me crazy because I can't find a fix for it.
    I've tried clearing the caches - no difference. All other websites appear normally.
    I have a 15"  Macbook Pro (mid-2010) with OS X 10.9.2.
    Please let me know if you have any ideas on how to fix this.

    fMobi is a great app available in the Nokia Store that performs all of the Facebook functions. have used it on my N8 and it works great

  • Icon in header coloumn only displayed when not bound to context

    Hi
    I face a pretty strange behaviour in my application. I have  atable with some columns.
    I want the header with an icon behind the text. usually that is no big deal. Alas the icon wll not be displayed when I bind the columns textview to the context. when I hard-code some entry to the "text" property the icon is shown.
    I tried it on several columns,  copied the columns and just switched the text property, its always the same behaviour...
    2004 SP19
    Stefan

    Ok,
    It finally works, it's always good to get a break when you're stuck..
    I deleted the tablesorter class and used to "offixial" one from the tutorial. then the icons were displayed after th efirst time it was sorted.
    As you can read in thread Re: Webdynpro Table: Column Header sort icon not visible
    that happened to others to.
    I just added one method to the tablesorter class...
    public void sort(IWDNode dataSource, String columnId)
    and called that upon table data context binding, so that initialy the table is sorted and also the icon appears on the initially sorted
    regards
    stefan

  • Login screen only displays users, not name/pwd fields

    I'd like my Mac to display just a name and password field when booting, but it will only show a list of users instead, even with that option unchecked in Login Options. I have Filevault enabled; does this have anything to do with it? Please advise.

    It may be possible, but not recommended, as Apple does not support that and you may have issues to log in them. Remove them if you do not need them, but if not, I am afraid you will have to choose the user you want to log in with. This is even more difficult to change with FileVault, because your Mac asks you for the user and password before starting loading OS X (remember that your Mac's drive is encrypted).

  • Siri only reply with text not sound

    Hello,
    After the upgrade to IOS 8.3 Siri is working in Portuguese but only in text not sound can someone help me to start listening to the sound again?
    And goes in loop if i ask im to send a message, keeps asking what to do
    Thanks

    I have the same issue.  No solution yet, unfortunately. 
    <Email Edited By Host>

  • CSS - Text not taking up all of Table Column

    Hello,
    I have a table, the first column of which is 535 pixels long. However, the contents of this column (a variable called $row['site']) only displays text for about 200 pixels, and then the remaining text spills down onto the row below. The result is ugly. My code and CSS are below.
    How can I get the text to extend into all 535 pixels of the column?
    Thanks in advance,
    John
    The code for the table (just up until the first column):
    <?php
    print "<table class=\"navbar\">\n";
    print "<tr>";
    print "<td class='sitename'>".'<a href="http://'.$row['site'].'" class="links2">'.$row['site'].'</a>'."</td>";
    My CSS:
    table.navbar {
            margin-left:100px;
         margin-top:30px;
         text-align: left;
         font-family: Arial, Helvetica, sans-serif ;
         font-weight: normal;
         font-size: 12px;
         color: #000000;
         width: 700px;
         background-color: #A7E6FE;
         border: 1px #FFFFFF;
         border-collapse: collapse;
         border-spacing: 4px;
         padding: 4px;
         text-decoration: none;    
    table.navbar td {
       border: 2px solid #fff; 
       text-align: left;
       height: 16px;
    table.navbar td a{
       display: block;
       padding: 3px;
    .sitename { width: 535px;
    a.links2:link {
          color: #000000;
         text-decoration: none;
          text-align:left;
        margin-top:6px;
        margin-bottom:2px;
         margin-left:2px;
        padding:0px;
         font-family:Arial, Helvetica, sans-serif;
         font-size: 12px;
         width: 10px;
         height: 12px;
         vertical-align:middle;
    a.links2:visited {
          color: #000000;
         text-decoration: none;
          text-align:left;
        margin-top:6px;
        margin-bottom:2px;
         margin-left:2px;
        padding:0px;
         font-family:Arial, Helvetica, sans-serif;
         font-size: 12px;
         width: 10px;
         height: 12px;
         vertical-align:middle;
    a.links2:hover {
          color: #000000; text-decoration: underline;
         text-align:left;
        margin-top:6px;
        margin-bottom:2px;
         margin-left:2px;
        padding:0px;
         font-family:Arial, Helvetica, sans-serif;
         font-size: 12px;
         width: 10px;
         height: 12px;
         vertical-align:middle;
    a.links2:active {
          color: #000000;
          text-align:left;
        margin-top:6px;
        margin-bottom:2px;
         margin-left:2px;
        padding:0px;
         font-family:Arial, Helvetica, sans-serif;
         font-size: 12px;
         width:10px;
         height: 12px;
         vertical-align:middle;

    Hello,
    I figured it out by searching on Google:
    .sitename { width: 535px;
                overflow:hidden;

  • Nano Just displays "Do not disconnect@

    When nano is connected to pc only displays "do not disconect" and does not show up in iTunes (but windows can see it. Have re-started, re-loaded etc. Any help, please?

    If your iPod is recognised by the computer and iTunes, then the answer could be as simple as you have your iPod enabled for disk use. If this option is switched on then the Do Not Disconnect will stay there until you manually eject your iPod.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if your iPod set to automatically sync (automatically update songs and playlists) with iTunes and also has a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

  • System Preferences - Display Preferences ---- not opening

    In my Snow Leopard 10.6.5 under System Preferences only Display Preferences not loading. It is giving error "System Preferences cannot be opened because of a problem".
    I tried resetting PRAM and NVRAM. Also is deleted the file com.apple.systempreferences.plist. Still it did not solve the issue.
    Please let me know how i can solve the issue.
    Thanks
    Jana

    Get a bootable, external HD (preferably FireWire, since it's 40-50% faster than USB 2 and designed for data transfers), make a bootable backup/clone before updating/upgrading, and ensure that it's bootable and works like the original. Then have your corporate IT reinstall the image and use the Migration Assistant to restore all of your customizations. See these for details:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html

  • Read Only Display of Radio group and Text area with counter not working

    Hello,
    I am using Apex 3.2, with 10g for the database
    I have this form, with fields that will set to read only when status = 'closed'
    All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
    1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
    2nd field is Status which is a radio group that will not display as read only when status = 'closed'
    I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
    Any help on this is greatly appreciated.
    Mary

    Dung,
    That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
    Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
    Scott

Maybe you are looking for