TV out pictures

I heard that the quility is bad when you connect your 5G ipod to a tv. I didnt want to hear this! DANG! Is this true, or is the image on the screen still veiwable? or really bad. Can someone post pictures of there ipod hooked up to a TV? Is the A/V cable that apple sells good or?
Shelly

Due to interlaced nature of TV rendering, it is usually difficult to get a picture good enough to properly evaluate "quality." Quality is good if the source quality is good and you take the time to use higher quality conversion settings. Quality is about the same as a VCD or SVCD -- slightly better than average VCR.

Similar Messages

  • Canon EOS Rebel T3 not taking out pictures

    I have my camera since 2010. lastweek I tried taking out pictures and realise I wasnt getting a focus but I took a picture. Now today, I am pressing the shutter button but nothing.
    I have a stock lense EFS 18-55MM and its on the Canon EOS Rebel T3.
    I took the lense out and cleaned the contacts, and replaced the lense, this did not helped. I also did a manual reset on the features but that didnt help either.
    Please help me.

    Hey Mike,
    Indded I understand the underexposure and I have been taking pictures since 2010 with this Camera, no problems. I used the stock settings and after doing my course, i understtod the aperture, shutter speed and ISo, however I just dont understand how I can pickup my camera and it stop taking Pictures.
    I have gone thru all the basics to ensure in ruling out the possibilites. I am surrently reading back all my notes and refreshing my memories about it all. Its always good to refresh the memory.
    I willcontinue researching and understanding some more. I still unclear why my camera is behaving such way. I intend to get to the bottom of this. I am a photography and I need my camera to shoot.
    I am going to try and change the exposure to not underexpose to be be normal. I usually shoot in Manual since i have freedom of my shoots. I have perfected in shoot in this mode, but what are the odds.
    So i tried shooting on Program mode and its working perfect, I come to the conclusion that my manual mode is screwed up. I did however had my brother use my camera a day but i was present, now i have to backtrack and see what he did in Maunal mode. Thank very much for helpingme out,
    I will keep posting of any weird behavious experience.
    However what are the basic settings I should in manual mode?

  • IMessage cannot send out pictures. Please help?

    Hello, I am unable to send out pictures on iMessage - texts are fine.
    It simply shows the red error icon & states Not Delivered.
    Only pictures cannot be delivered, texts are completely unaffected. Definitely not a network issue.
    Is anyone facing this same problem???

    I was having the same problem on my iPhone 4S and my iPad. I found that if the person i was trying to send them too had not done the latest update then I would get the "Not Delivered" message. So I updated said persons phone and now I have no problem sending and they no longer have a problem receiving them.. Hope this helps out! :)

  • My I-Pad screen is black, I tried to sync and restore I-Pad, it showes the contents on the computer and pulling out pictures and other files, but screen is black. what can I do?

    My I-Pad screen is black!! I tried to sync and restore I-Pad, it showes the contents on the computer and pulling out pictures and other files, but screen is black. I don't know what happened! what can I do?

    I have this problem as well...however, resetting/restoring did not take place when I followed the same instructions but got nothing on the screen.  Thanks in advance.

  • Wont send out pictures

    My phone has stopped sending out pictures.  I check the details on the message and the status is showing as pending.  I tried re-sending the pictures but a message stating that I have too many pending pictures sending shows.  I have turned off my phone and closed all possible opened applications but it still is not sending out MMS messages. What to do?

        Hi iyani25,
    This is very strage! I want you to be able to share your precious moments. Try selecting all pending picture messages and delete them. Then try sending pictures again.
    Also, are you using a 3rd party messaging application? If so, please delete it from your phone and try sending your picture with native application.
    AntonioC_VZWSupport
    Follow us on Twitter at www.twitter.com/VZWSupport

  • Aperture and mobileme = washed out picture after downloading?

    Hi,
    Synced a few albums from Aperture to a few mobileme gallery's so a few friends could download the pictures very easy. One of them asked me why i screwed up the pictures because the all appeared to have a washed out look on his pc.
    Tried it myself and it's true.
    If i download a picture from the gallery and open in in Xee on my mac it appears to be washed out, in preview it looks ok. On a windows pc in the default picture viewer same result.
    Opening the file in photoshop it appears to be ok.
    Tried to talk to a mobileme support guy but he couldn't help me with it.
    test album: http://gallery.me.com/reinoutsmit#100099&bgcolor=black&view=grid

    Don't fully understand what you are observing in Aperture. For me originals show Adobe RGB, as do the images seen in the MM gallery within Aperture, and as do Downloads from that MM gallery. (I primarily use SmugMug these days, and not MobileMe galleries).
    Secondly, I don't correlate what William said with viewing of a Download -- but would perhaps with Online? Any download should view fine, unless the problem is with the viewing app? And as I said, everything I could view a download with displayed fine.
    Third, another discussion, unrelated to Aperture discusses similar issues with profiles -- see:
    http://discussions.apple.com/thread.jspa?threadID=2272826&start=15&tstart=60
    Ernie

  • Washed out pictures during night with LED lighting

    Few nights back i was into a pub with my friend, we planned to capture memory with a picture. Then i set up my cam with flash light (on and auto-swapped for few times), when taking pictures got a washed out (a white, light coloured) image. Tried few times as this captured few good shots during day light (without LED), and in night with adequate lighting (flash kept off) but every time got the same poor image.
    Finally had to use black burry 2.0 cam, which gave better image than this 5.0 cam.
    Could someone help me to resolve this, do i need to contact the service centre to change any parts or change software. As of now i use all updated (OS and i-tunes), i just update what ever is updated.

    PIjoe : has got answer for me, and feel it was my stupidity of protecting mobile.
    "I had the same problem with occasional dark pictures... i noticed this only happens when I the flash is used... because when the flash is off pictures do come out ok...
    and i discovered (embarrased on my stupidity), it seems i still havent removed the plastic protector at the back of the iPhone4. it appears the plastic diffuses the light from the flash and affects picture output drastically.
    I hope this helps. "
    The above was her answer to other forum, Thanks..

  • I just got my Photosmart 5512 all in one printer and I mainly got it to print out pictures.

    I am having trouble with that. I have a big pack of the 4x6 photo paper and I try to print 4x6 pictures and I change the printing preferences to that size and hit print and it will not read my 4x6 paper. I try to place it in the middle and on the right side and it wont seem to read there is paper in there and keeps saying out of paper. I can only print 4x6 pictures on the 8x10 paper. Which is a big waste. Someone please help me figure out how to fix this.

    Hello jemo94ckm.
    I understand your concerns. When printing on photo paper the crucial step is changing the settings through the type of program you are printing from. Here is an HP document on How to Print 4 x 6 Photos Using the Printer Software.
    Also you want to make sure you are loading the photo paper in the paper tray the correct way. Please click here to find out how: Loading Photo Paper.
    I am going to provide some tips on How to Improve Print Quality When Printing Photos.
    If you have any other questions please let me know.
    I worked on behalf of HP.

  • Cut out Picture w/ No Background

    All I want to do is take a digital picture and cut it out so
    that it is in a circle shape w/ no background. I need to input it
    into a flash template. I've tried saving it as a GIF, because I was
    told that it would make the background transparent. However, when I
    put it into flash, it still shows a white background. Can anyone
    help me? This seems like this would be a fairly simple & common
    task.
    Thanks!

    micahman wrote:
    > All I want to do is take a digital picture and cut it
    out so that it is in a
    > circle shape w/ no background. I need to input it into a
    flash template. I've
    > tried saving it as a GIF, because I was told that it
    would make the background
    > transparent. However, when I put it into flash, it still
    shows a white
    > background. Can anyone help me? This seems like this
    would be a fairly simple
    > & common task.
    If the image has a white background and you are exporting it
    as a GIF
    with Index transparency to eliminate the white background,
    you will be
    left with a white anti aliasing halo around the foreground.
    You need to
    extract the foreground from the white background. Here's a
    good article
    about how to do that.
    http://www.adobe.com/devnet/fireworks/articles/removing_backgrounds.html
    Once you've done that, set the export format to 32 bit PNG
    with a matte
    that matches the background of your Flash file.
    Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    Design Aid Kits:
    http://www.webdevbiz.com/pwf/index.cfm

  • Grayed out pictures in "Faces"

    In process of creating DVDs , of pictures from iPhoto, the "Faces"portion of the iPhoto library shows Grayed out photo instead of the typical photo. May have been result of migration to iMac with HDD plus SSD. Any way to restore " Faces"?
             Using  Lion 10.7.3
                         IPhoto 11

    Right your are, Beat. I'm planning on getting a Spyder3, but in the meantime
    I thought I would try running the Windows monitor calibration procedure
    (partly described below).
    Kind regards,
    Ron
    Calibrating your display helps to ensure that colors are represented
    accurately on your monitor. In Windows, you can use Display Color
    Calibration to calibrate your display.
       If you have a display calibration device that came with other software,
       consider using the color measurement device with the accompanying software
       instead of Display Color Calibration. Using the calibration device with the
       accompanying calibration software that often comes with it can help you get
       the best color on your display. In general, using a color measurement
       instrument to calibrate your display will result in a better calibration
       compared to the results of doing a visual calibration (which is done in
       Display Color Calibration).
       Display Color Calibration is not available in Windows Server 2008 R2.
       1.
       Click to open Display Color
    Calibration.<shortcut:%25systemroot%25\system32\dccw.exe>
       image: Administrator permission required If you're prompted for an
       administrator password or confirmation, type the password or provide
       confirmation.
       2.
       In Display Color Calibration, click Next to continue

  • Multicast Channels Sound Drop Outs / Picture Pixel...

    Had this issue for months now and its totally unique to broadband channels.  Its been a problem since leaving sky and joining BT in august.  
    Had around 5 engineers out who all say "Im the wrong type of engineer for this job, all i can do is check your broadband"
    Sound just randomly drops out and picture quality on ondemand such as kids is getting noticeably worse.
    Im on BT Infinity and get 79Mb DL which im told has no errors whenever an engineer checks however the guys on the phone tell me they can see my line is losing packets.  line correction has been applied and my speed was halved to 35Mb! This did NOT fix the problem.
    Watching channel 4 HD at the mo and if im being honest its like the kids have the remote and keep pushing Mute.  
    Had a REIN test and nothing is interfereing 
    Im at the end of my tether
    Oh and Both Box AND router have been swapped out
    Its a Black BT Vision Box and BT Home Hub 4
    Anyone had this issue and got it fixed?

    I wonder if the issue might lie with the HH4. Do you have an HH3 to hand or could you borrow one to try?
    I know that is not very helpful. The only other thing might be to swap to a YouView box.
    I assume you have tried different ports in the HH4?
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • I also am having problems creating cd cover. When I try to print onlt text comes out picture art is 1 big black square. cannot load library error shows up 126. Do anyone have a solution for this problem?

    Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?

    One other note I do have parallels installed but not running on both machines.
    Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
    Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
    Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
    10:18 PM Sunday; June 1, 2008

  • Macbook Pro washed out picture on Projector

    I have a Macbook Pro that I have tried hooking up to our projector in our church using the Mini Display Port to HDMI adaptor but it is completely washed out to the point that it can't be used.  It is only to this projector that I notice it.  Using the exact same hook up to other projectors and TVs the picture is perfect.  Also it is not the projector because a friend of mine hooked up their macbook pro the same way and the picture was fine.  I've tried adjusting the colour and display profile settings and nothing seems to work.  Does anyone have any suggestions?

    Check out the projector settings when your MBP is connected. Try connecting, the rebooting, try resting PRAM  after connecting.
    Make sure that the adapter is "happy" with your OS X version/projector.
    Reboot the whole "mess" while connected.
    You have not shared your OS X with us, you may try adjusting the scaled setting.
    The more info you share the more you may have someone be able to offer help.
    Help us to help you on these forums

  • Washed out picture

    Hi all,
    Since I upgraded to Quicktime 7.3 everything I try to watch looks really washed out. I played with the A/V ontrols but nothing helps. Also if I try to upgrade from the quicktime menu bar it brings up an error msg and shuts itself down so fast I can't even read the error msg.
    Is there anything I can do?
    Erin

    +Since I upgraded to Quicktime 7.3 everything I try to watch looks really washed out.+
    With that one, try the "Disable Direct3D video acceleration in QuickTime" section from the following document. (iTunes uses QuickTime for video playback, so the same basic troubleshooting techniques apply.)
    Troubleshooting iTunes for Windows XP and 2000 video playback performance issues

  • Ipad 2 HDMI out picture size problem

    Hi!
    When I connect my Ipad 2 IOS 5.0 device to the HDMI adapter and my TV-set ( Pioneer 42 inch plasma) is the picture 4/3 and not possible to tweak to fill the total square i.e. there is a black frame around the mirror of my Ipad picture. Can I tweak it? How?

    Yeah, i have the same problem...using the hdmi output a green fuzzy area in the bottom of the screen, kind of big, not just an line.
    Im using an Scarlet LG TV with 720p screen resolution.
    that really turned me down

Maybe you are looking for

  • Question with respect to a report painter report : tcode S_ALR_87100190

    Hi All, I had a problem with the transaction S_ALR_87100190. With this transaction meant for Actual/Plan/Var Project + Responsible, in the report selections for From Period/year and To Period/year, the system was not accepting special periods but was

  • How do I display PDF in 'book' or 'facing pages' mode?

    I don't mean VIEW> PAGE DISPLAY > TWO-UP. I've created a PDF document designed to be a book. I need the first page (the cover) to come up by itself, or with a blank on the left. Then all subsequent pages to display side by side, odd numbers on the ri

  • Need urgent help please PS + Lightroom instalation

    Hi, I bought some days ago the Monthly pack of Photoshop and Lightroom (12,99/month) Before I had the trial version. A friend of mine told me to unistall ADOBE programs before buying the Photoshop and Lightroom. I did it, or better I thought I did it

  • Motion on photos won't render in FCE...

    I'm putting together a short documentary and have a number of still photos I'm using with motion effects. I have no problem creating the effect and using/inserting keyframes, but the effect itself doesn't fully render. I try to highlight and render o

  • Cisco VT Advantage with IP Communicator

    Trying to use VTA with Communicator 2.0(1). When I click on the Video Icon on Communicator, the following message appears "Cisco Video Advantage version 2.0(1) is required to work with Communicator 2.0(1). I can't find VTA 2.0(1) on Cisco's site. Is