TV OUT Problem this is how I solved.

Well, first of all I cannot guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.
The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20, , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.
The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT). The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.
Than It came the must boring part. ;( I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):
Nvidia 28.32. work with nview.
nvidia win-xp-2k-2835 work with nview.
nvidia win-xp-2k-2880 doesnt work with nview.
nvidia win-xp-2k-2890 doesnt work with nview.
nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
nvidia win-xp-2k-2920 doesnt work with nview.
nvidia win-xp-2k-2942 doesnt work with nview.
nvidia win-xp-2k-2960 doesnt work with nview.
nvidia win-xp-2k-2980 doesnt work with nview.
nvidia Win2k-xp-29.90 doesnt work with nview.
nvidia W2K_XP_V29.90 doesnt work with nview
nvidia Win2k-xp-3020 doesnt work with nview
nvidia Win2k-xp-3030 doesnt work with nview.
nvidia Win2k-xp-3082 doesnt work with nview.
I got all this drivers from a really nice site: 3dchipset .
Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.
And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once. X(
That all folks

Yes, that's how iMessage should work. Try this. Sign out of Messages on both devices. Sign back in on your phone and wait until it activates. Go to Settings>Messages>Send & Receive. Make sure Start New Conversations From is set to our mobile number. Then sign in on your iPad using the same Apple ID as you use on your phone. Once it activates, verify the settings. I've got iMessage syncing across my iPhone, iPad and MBA. Every once in a while, there's a glitch but rarely.
Best of luck.

Similar Messages

When make GRN i receive this message how to solve this?

When making GRN I receive this error how to solve this?
The UOM conversion does not exist
Procedure
The UOM conversion does not exist in the material master for the material and UOM entered
Not maintained alternative unit of measure
I have checked in material master, inforecord, and purchase order. All are correct
Execues for unrelated answer

If ur purchasing uom is different from base unit of material master data,
maintain alternative unit of measurement,Click additional data maintain alternative uom in it to avoid this error.

"The disk you inserted was not readable by this computer". how to solve this problem?

"The disk you inserted was not readable by this computer." this message apear on my imac any idea how to solve this problem?

It means the disc is not in a format your computer can read or it is not formatted at all. You can remove the disc or you can attempt to format the disc. If the disc has data on it, then I would not format it.

This is how to solve error-8008 problems

Ok, this is how I fixed it. No one at apple told me to do this but it worked.
First I found my Itunes folder on my computer. For most people this will be on their main drive (C:/Itunes) Within your itunes folder there is a folder named DOWNLOADS.(C:Itunes/Downloads) In this folder Itunes stores temporary files of your downloads in progress. Double click on this folder and you should see the names of the files/programs that keep coming up error -8008. They will be folders with a .tmp extension.
Just delete them!!! I know this is scary but it works. Once you delete them go back to your itunes click on store and check for purchases and the downloads will resume.
Very simple version (assuming used the default Itunes install location)
Locate and double click on My Computer
Locate and double click on the folder itunes
Once inside the itunes folder locate and double click on the folder labelled Downloads.
In this folder you should see folders that have the same names as the files that have had -8008 error message, along with an extension of .tmp.
Delete those files!!!
Go back to itunes and go to store then check for purchases and everything should go perfectly fine.
It did for me.
Windows XP

it does not work every time and or on every computer, i have the same issue as above but this does not work all it does is start the file over and then the file just errors out again.

HT5624 Just purchased an Ipad, I,m stuck on a page "Conditions" on this page ias a note saying "Send by Email", i cannot get out of this page, how do I get out. Walter

Just purchased an Ipad, I'm stuck on a page "Conditions" on this page it says "Send by email"
. How do I get out of this page. Walter

Reboot the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen. It takes about 10 seconds. After you see the logo, you can release the buttons.

I just tried to load the latest version of itunes, and got a windows error 1114, and error 7. It failed to load. Anyone have this problem?? How to solve??

Anybody have any ideas - couldn't load latest itunes version, windows error 11.

Hi Meskijian,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

I upgraded my iPhone software yesterday and now I am getting personal hot spot. Can any body tell me why this and how to solve this problem.

I up graded my iPhone software yesterday and now I am not getting personal hotspot. Can any one help?

Did you check for a carrier settings update?
Copied from iOS: System requirements for Personal Hotspot
To confirm that your iPhone or iPad Wi-Fi + 4G can share its cellular data connection using Personal Hotspot, tapSettings > General > Network > Personal Hotspot.
If you don't see this option and your carrier supports this feature, check for a carrier settings update. If you still cannot enable this feature, contact your carrier for additional information.

TWO problems with "Organizer" -- How to solve?

I am running PSE-4 on a WIN-XT PC.
I upgraded a little while back from PSE-3 and had, so far, only worked with the Editor. (BTW, it's nice to see that Adobe finally fixed some very nasty bugs that plagged PSE-3 Editor, like the "jumping image, etc., as well as an improved speed.)
I needed (and still need) to convert 17 pix that are in a directory on their own into High-Quality "12" JPG files. Nothing should be simpler...
Well, first thing I realized is that, apparently, I can NOT do that in PSE-4's Editor. I had to go to the "Organizer" to try that. (Or am I missing something here?) And that's how I bumped into two crazy problems...
PROBLEM #1:
From the 17 PSD files (all of them contain several layers), only 12 did show up as Thumnails in the central pane.
Why is that?
Where did the 5 missing ones get stuck?
HOW can I get ALL 17 files to show up in the thumbnail pane so that I can select them for a "batch-conversion" to JPG?
PROBLEM #2:
While in "Organizer", all I see below each thumbnail is a date! So, if I have a shoot of, say, 100 pix on a same day, I end up with 100 pix having the same "name" -- useless and insane! (IF I wanted ALL the pix shot on a given date/day, I would only want these specific pix show up in the pane, EACH with its own specific name!)
I checked the various "defaults" that may effect the results and they seem OK. However, given the incredible lack of intuitiveness (!)this "Organizer" module has, I may have missed something somewhere or plain not figured out a twist somewhere to make the files' actual NAME show up under ech thumbnail.
Any suggestion(s) to make these file NAMES appear under each thumbnail?
THANKS!
Duke

Barb,
Problem #2:
You guessed right -- BINGO... and a big THANKS!
Increasing the size of the thumbnails did the trick.. the Names appeared below the Dates.
(I still am shocked that Adobe would leave such a "shortcoming" in that program. From a programming point of view, there are at least two easy ways to go around the "small space" problem for the fields below thumbnails having a small size... I guess we all will have to wait a couple more releases of that program to see that quirk fixed.)
Ward,
Problem #1:
No luck here. Increasing the thumbnails to the max (or anywhere inbetween) did make the 5 missing file appear.
So, I made one more File>Get photos>From file folder. Same results.
So, I looked at the list of "files/items that were NOT imported". Interstingly enaough, ALL 17 files were listed!
Now, for ALL of them, the "Reason" given "why" these 17 files/items weren't imported is that, according to "Organizer", "Files already exist in the catalog". And that sent me thinking about some weird possibilities...
Somehow, that catalog has a lot of files that, from what I could recognized and figure out, were "acquired" with the "Organizer" of PSE-3. What I see in the pane where the thumbnails are is a succession of directories with some of their pictures displayed as thumbnails. And now I am wondering:
Could it be that "Organizer" is so conceived that it doesn't accept/put a same file TWICE in the "Catalog"?
(I'll go -- slowly -- through the hundreds of pix in that Catalog to see IF I can spot these exact same five pix in some other directory that has already been acquired)
IF the answer turns out to be "yes, a file can only be ONCE in a catalog, no matter in what directory", then I probably will be going back to IrfanView to shuffle and convert pictures on ma system. Its logic and straightforwardness for dealing with files are a model of common sense.
Do you know IF "Organizer" has such a 'rule' that a file can only be once in a catalog?
From what I can see so far, I'll batch-convert the 12 files that show up as thumbnails in "Organizer" and singly convert the 5 others in "Editor".
Thanks for the feedback!
Duke

Time Capsule internet drop-out problem.... Solved (for now....?)

I am new here, but i would like to share my experiences with a problem a lot of people seem to have here aswell.
I got home last week after being abroad for work for two days, and noticed i couldn't get on the internet again. My system uses an iMac, TC and an internet modem i got from my ISP, which is a Motorola modem.
Hooked the TC up to the modem via ethernet and this has been working without a glich for about 2 years now. I first noticed the problem on my iPhone which was unable to get on the internet. Connected to the network just fine, but no internet. Very strange, as i had a solid green light on my TC.
Checked the internet on my iMac, and i found the same problem. Did a reset on the TC and the modem, and things seemed to be ok again. But.... after about 20mins. internet was not working any more again. By now i was getting rather frustrated, because in the AirPort Utility it said everything was working the way it should, including a solid green light on the TC.
Been going over everything i could think off. Soft reset, hard reset, going back to factory settings, resetting the modem. Just resetting the modem, just resetting the TC, resetting both at te same time. Nothing seemed to work, the problem kept coming back! Downgraded the software on the TC, upgraded again. Nothing.
Strange thing was, i hooked up my computer via ethernet directly to the cable-modem and internet was just fine, so no problem there, which was confirmed when i called my ISP (which is great... as long as there is no problem)
After 3 days i finally called Apple, and they were ok to help me. For free just for once (next time i will have to pay 49euros!!) and told him about my problem. He gave me all suggestions i already tried, except changing channels on the TC.
After the call i tried doing that, going from channel 1 to 6, but still... after 20 - 30 mins. internet would drop.
But.... i put it on channel 7 and for now it is working great again. (no loss of internet for about 36hours!!)
This seems to be THE solution for my problem. Apparently, one of my neighbours put up a device which was interfering with the signal of my TC, which caused all my problems!
For now i am really happy everything is back, up and running and i thought i just let you all know about my problems, and solution, because this forum has been a great help!
And... before i forget.... i am running firmware 7.3.2 now... because i read a lot of problems about 7.4.1 and things are running great for me now !!
Hope this little story can help someone else..... try change the channels TC is working on !!
Good luck to you all!
Greetz, Peter
(the Netherlands)

I am new here, but i would like to share my experiences with a problem a lot of people seem to have here aswell.
I got home last week after being abroad for work for two days, and noticed i couldn't get on the internet again. My system uses an iMac, TC and an internet modem i got from my ISP, which is a Motorola modem.
Hooked the TC up to the modem via ethernet and this has been working without a glich for about 2 years now. I first noticed the problem on my iPhone which was unable to get on the internet. Connected to the network just fine, but no internet. Very strange, as i had a solid green light on my TC.
Checked the internet on my iMac, and i found the same problem. Did a reset on the TC and the modem, and things seemed to be ok again. But.... after about 20mins. internet was not working any more again. By now i was getting rather frustrated, because in the AirPort Utility it said everything was working the way it should, including a solid green light on the TC.
Been going over everything i could think off. Soft reset, hard reset, going back to factory settings, resetting the modem. Just resetting the modem, just resetting the TC, resetting both at te same time. Nothing seemed to work, the problem kept coming back! Downgraded the software on the TC, upgraded again. Nothing.
Strange thing was, i hooked up my computer via ethernet directly to the cable-modem and internet was just fine, so no problem there, which was confirmed when i called my ISP (which is great... as long as there is no problem)
After 3 days i finally called Apple, and they were ok to help me. For free just for once (next time i will have to pay 49euros!!) and told him about my problem. He gave me all suggestions i already tried, except changing channels on the TC.
After the call i tried doing that, going from channel 1 to 6, but still... after 20 - 30 mins. internet would drop.
But.... i put it on channel 7 and for now it is working great again. (no loss of internet for about 36hours!!)
This seems to be THE solution for my problem. Apparently, one of my neighbours put up a device which was interfering with the signal of my TC, which caused all my problems!
For now i am really happy everything is back, up and running and i thought i just let you all know about my problems, and solution, because this forum has been a great help!
And... before i forget.... i am running firmware 7.3.2 now... because i read a lot of problems about 7.4.1 and things are running great for me now !!
Hope this little story can help someone else..... try change the channels TC is working on !!
Good luck to you all!
Greetz, Peter
(the Netherlands)

Try to enter reedem code mountain lion and it says you need a payment method to access this functionality. how to solve this?

try to enter reedem code mountain lion and it says you need a payment method to access this functionanlity

I got it to work by using a US Apple ID.

How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?

Question to all iPad users please help in this issue
How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?
Thank you for help out.

Hi Jamalzoal,
Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community.

I've updated to iOS 7 on my iPhone 5 and my keypad isn't translucent it's just white, doesn anyone know how to solve this?

Hi guys,
I've updated to iOS 7 on my iPhone 5 and my keypad isn't translucent it's just white, has anyone had this problem or know how to solve it? I've restored the phone twice and still my keypad isn't translucent. Thanks in advance.

Here's a screenshot:
[IMG]http://i.imgur.com/fM3znOQ.png[/IMG]

How to solve this BIOHD-8?

My pc showing BIOHD-8 this message how to solve this? My pc components are
dual core processor E5400
1 gb ram
320 gb hard drive
This question was solved.
View Solution.

If you are able to boot into Windows, go to an elevated priveleges command prompt.
Type in chkdsk /f and press the enter key. Let it run to completion.
The chkdsk utility may be able to repair the issue if it is bad sector related. If the repair is not successful you will have to replace the hard disk and use recovery media to reinstall the operating system and drivers.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Switchable Graphic Problem AMD & Windows 8.1- Solved

Follow the steps accurately
1. Open This Pc or My Computer and then go to Uninstall or change a program
2. As the list is displayed, you will see Intel Graphic Driver & AMD Catalyst install manager. You have to uninstall it both in express mode so that no other previous setting are available anymore.
3. First, uninstall Intel Graphics driver. If it asks for a restarting the pc than go for it.
4. As the list is displayed, you will see AMD Catalyst install manager, right click it and uninstall it in express mode. Uninstall all the AMD component. Restart your PC as it will ask you.
5. Go to This Pc or My Computer and then C Drive. Open Program Files & Program Files (x86) both of them if you are running 64-bit Os. In the search box write AMD and you will find some remaining files- delete them all.
6. Now you PC is free of previous drives and the remaining files. Although right click to Windows sign and go to Device Manager. You will see Display adapters and uninstall them both. This step is not necessary but just to be sure that your PC has no previously installed drivers.
7. Open your browser and download the latest Intel Graphics Driver for your PC. My driver was Win64_153322. Install it. If you install it correctly than you are half way through. Restart your PC if it requires.
8. Go to AMD web site and download the latest driver. To avoid complicacy best option is to download Autodetect. Because it will choose the best appropriate driver for your system. File name is amddriverdownloader.
9. Open the file amddriverdownloader and download the driver. Download will be completed and it will start automatically the installation. Install it in express mode. Restart your PC as it will ask you to do it.
10. Hopefully your driver problems will be solved. To check it go to device manager and see if the drivers are installed correctly. Turn on CCC and give it a try to play a game in High Performance. You will see the problem is solved.
This is how I solved my AMD graphics problem. I been suffering since I installed Windows 8.1 just after it was released and today 15 Jun 14 I solved the issue. I can play any game in High performance now.
If you think my opinion is helpful to you than Please share it.
Liyad Salem Mridu.
Please hit Kudos, if I help you!

hey , can u help me ? i am having the same problem

IPad3 gets uncontrolled! How to solve it?

iPad3 gets uncontrolled changing from application to application, making uncontrolled clicks, opening new apps, etc without any touch on the screen! Does anybody faced this problem already? How to solve it?

Try this first.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
I think the next step would be a full back to factory settings iOS install, and if that doesn't help ... and honestly I don't think that it will help ... contact Apple.
It sounds like your iPad i suffering from "phantom touching" or "Ghost typing", and the only "fix" that I have ever seen was to have the device replaced. It is probably a hardware failure.

TV OUT Problem this is how I solved.

Similar Messages

Maybe you are looking for