TV-out problem with a Qosmio G20 - Scart option disappeared

I have a problem with my video board and its driver.
I have got a Qosmio G20 with a Nvidia GeForce Go 6600.
Yesterday when I boot my notebook i have seen that some setting were disappeared.
I have tried to connect the pc with the TV in the way described here: http://support.toshiba-tro.de/kb0/TSB4A00TK000MR01.htm
but the option scart in the tv format menu was disappeared and it was disappeared in bios setting too.
I have tried to reinstall the display driver but I haven't solved my problem.
Now i can't connect the pc with tv and this is a very big problem for me.
Please help me if you can.
thanks. (and sorry for my very bad english)

Hi
Maybe the scart cable malfunctions or is wrong?
Some cables have a wrong PIN assignment and therefore the TV connection not functions
In my opinion the cable should be checked
The other reason for the missing PAL scart option in the BIOS could be a wrong DMI setting. But this can be checked only by a ASP.
So try to contact the technician guys and talk to them about the problem of missing PAL scart option in BIOS.
bye

Similar Messages

Problems with a Qosmio F20/390L Network/Ethernet controller

I've got a problem with a Qosmio F20/390L from Japan, and I'm trying to get hold of the network drivers for it.
I've had a look on the US, UK and Japan sites, but I've had no luck. Can anyone tell me what you have in your machines if you can't tell me what I've got, so I can try my luck.
Thanks.

Hi,
you can find the LAN driver for the F20 here:
http://eu.computers.toshiba-europe.com
under "Support & Downloads", "Download drivers"
Bye

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Strange issue with my Qosmio G20

Qosmio G20. Purchased January 2006. - Just out of guarantee.
I have now noticed a grayish smudge / against white background screen - positioned at the btm of the screen about 4"long with a depth of 1" - the smudge appears also to extend vertically but becomes less noticeable.
Any thoughts what the problem could be.
Thanks

Hi
According to your message the issue looks like something wrong with the display.
Dont think something like that can be related to the software issue but who knows
Try firstly to update the BIOS to the latest available version.
Then you should try to update the graphic driver.
If both updates dont help then a hardware fault could be possible
In this case the faulty part must be replaced
Best regards

Can't figure out problem with new PC

Hi all, I just built my first PC and everything's running pretty well with the exception of some lag and freezing. My mouse and keyboard sometimes lag behind my true movement. The mouse does this more often and will lag behind for a second before it catches up to my true movement. Also, the system has occasionally frozen with the image still on the screen (no blue screens). Finally, when trying to play music, the audio will skip out every 10 or 12 seconds. Otherwise, the system is working fine... I've been burning DVDs with it and programs run fine on it.
I'm thinking that it has something to do with the RAM. Here is what I've done so far: I have all the newest drivers from MSI and Sapphire. I've tried running the system with each of the 512MB modules by themselves. I've also tried putting them in different DIMM slots. Any features in the BIOS that may slow the system have been disabled. The system runs right around 37C for CPU and 42C for the system, so overheating is not an issue. The RAM isn't getting too hot because the system is slow right from a cold boot. I've done memtest and it has showed the RAM to be good. I also ran CPU-Z and the memory specs are below. Does anyone have suggestions as to the cause of these problems and how to fix them? Thanks in advance for the help!
CPU-Z memory specs:
CPU-Z version 1.22
Memory Modules Serial Presence Detect (SPD)
Module #1
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      K
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8
Module #2
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Infineon (C1494E46494E454F)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      64D64320GU5B
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8

I now have all my programs loaded back on and all the drivers loaded and still have no problems with lagging or audio skipping. I did not install any of the Promise drivers this time. All I installed was the via driver necessary for installing windows xp at the "F6" menu. I also did not install all of the MSI utilities, etc. this time. SO all I can think of is that the problem lied in the promise drivers or some of the MSI utilities. The PS is running all of my drives fine as of right now. Regardless, I'm up and running good, so I'm happy. I hope this helps someone else.
Also... has anyone had problems with the Realtek ethernet adapter? My comp. gives me a "network location no longer available" error every time I try to copy files over the network from my other computer. I haven't seen anyone else with this error or found how to fix it. I have file sharing enabled, the windows firewall is not on, TCP/IP is installed along with client for Microsoft networks. They're all in the same workgroup also. I can connect to the Internet and the connection seems to be set up properly. I think that covers everything I've checked...

5700 TV-OUT problem with colours

Hi!!! I'm trying to fix the problem with my vga, but I could not get it fixed... The problem is that sice yesterday the colours in TV-Out mode is wrong, it appears that is on iverse colours, but I cannot change it. I had already reinstaled the nVidia 56.72 driver, reinstaled Windows XP SP1, and didn't work. Earlier today, I tried to connect the composite video cable and get the right colours, but just before I connected the S-Video again to check if the colours was right as composite, but for my sadness, it wasn't. Then I reconnected the composite and the colours was worg that out too, now the two TV-Outs, composite and S-Video are with the wrog colours... I don't know what else to do... help me!!!
Thank you anyway.

Hi,
Try changing the TV standard. Brazil uses a less common PAL-M standard, which uses NTSC line and field rates (525 lines,60 fields/sec) and a unique colour subcarrier frequency, which is close to the standard NTSC frequency. For more details on TV standards, look here.
You might have to experiment to find the combination which works best with your TV set.
Cheers

59000XT 128-VTD TV-Out problem with video.

I have the MSI GeForce 5900XT-VTD128. I´m using the TV-Out funktion and I clone my primary desktop. It all works fine to show the desktop on my TV. But when I try to play a Quicktime Movie in Quicktime it dosen´t work. It is the same problem with Windows media player.
I get a good picture on my primary screen but I get a "black" picture on my TV.
Ex. if I run windows Media player and starts an MPEG and I run Windows media player not maximized. On my primary screen I can se the Video beeing playd. But on my TV I only see Windows media player but I don´t see the move bieng played. It is just black. The same thing hapens in Quicktime. I Can't see video on my TV.
what could be my problem?
I´m using the latest drivers, (Have tested with Nvidias latest to but i´m now back to MSI 61.77)

Thanx.
That worket for me!
/Best regards
Sven Hagström

TV Out Problem with Hermes 650

System : Hermes 650 Slim PC, V-Gear MyTV TV Capture card
Software : V-Gear TV, PowerVCD
Problem Description :
When I use V-Gear TV software or PowerVCD to watch TV programs on TV thru the TV-Out output, everything ( ie the desktop, the apps etc ) are displayed except the TV content , leaving a blank frame.
I suspect this is a problem on the handshaking between the TV capture card and the video controller. Would appreciate the experts here can give me some more clue.
Thanks.
J.Lee

Hi
Maybe the scart cable malfunctions or is wrong?
Some cables have a wrong PIN assignment and therefore the TV connection not functions
In my opinion the cable should be checked
The other reason for the missing PAL scart option in the BIOS could be a wrong DMI setting. But this can be checked only by a ASP.
So try to contact the technician guys and talk to them about the problem of missing PAL scart option in BIOS.
bye

IPod Touch 2nd Gen Video Out Problem with Apple Component Cable

I'm trying to get video out working with my iPod touch connected to my TV. Here's the information.
32 GB iPod Touch 2nd Gen
Apple Universal Dock (current version.)
Apple Component Out cable for iPod (current version that connects with a dock connector.
I've connected the component cables into the component video input on my TV. When I start playing any video (purchased off iTunes store in Standard Def,) I get a scrambled picture that appears to be the video, and no sound. I purchased the TV in South Korea and haven't gotten to test it yet on a TV back in the US. I have my video out settings with wide screen turned off and set to NTSC (South Korea uses NTSC.) I've also tried every setting combination, and switching the cable connections with the same or similar results. Sorry if a similar problem has been posted elsewhere, but after searching, I couldn't find any similar behavior. Any ideas on what might be the cause? I don't have any other component devices to check if the component on the TV is bad.

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Video out problem with Dynex 32" 720p TV

Hi folks. I bought my new Dynex TV a few days before New Years. It's great, really sharp, and I've had no problems with it. However, I do have a DVD recorder so I can record my games. Tonight, I attempted to use the A/V output on my TV and connected them to my DVD recorder (which plugs into my computer). I clicked "capture" and got an error telling me that a connection could not be established and that I should double check my cables. I could hear the audio playing through my laptop speakers just fine. I couldn't see the video, for some reason .
It's not the cables, I just took them off of my old TV to use them here.
What can I do? Should I return my TV?

What about output from a gaming console, like a PS3? Is that only digital sources or does it matter how the PS3 is connected to the television to determine if's its a digital or analog signal? Right now I get no output when I try to send the video of my PS3 to my composite video in on my computer's TV tuner card.

Stereo Out Problem with Macbook Aluminium(Late 2008) Debian OS

Hello. I'm using my Macbook Aluminium(Late 2008) with 2 operation systems: Snow Leopard(10.6.8) & Debian Squeeze (6.0.4). I've no problem with OsX side, works fast & great. But I've got a interesting problem with Linux side. Everything works but Stereo Speaker. I realized that my macbook uses only one output(right speaker works, left doesn't), so I can't listen stereo music on Linux side. Debian uses ALSA Audio aoutomaticly. I've already asked Debian forums but noone able to solve my problem, so I decided to ask here with my last hope.
What I tried:
1- used ''speaker-test -c 2'' terminal code & I've seen this message
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 5.823448
2- Checked Debian's Audio Settings, everything seems normal.
3- Installed Pulse Audio, but it used Alsa base so nothing chanced. In Pulse Volume Control Panel, I saw I've got only Mono Output. But I there is no section for change to stereo.
4- Uninstalled ALSA & installed OSS4 but OSS4 simply doesn't work. So turned back to ALSA.
5- My stereo works only with headphone on Debian.

Hello. I'm using my Macbook Aluminium(Late 2008) with 2 operation systems: Snow Leopard(10.6.8) & Debian Squeeze (6.0.4). I've no problem with OsX side, works fast & great. But I've got a interesting problem with Linux side. Everything works but Stereo Speaker. I realized that my macbook uses only one output(right speaker works, left doesn't), so I can't listen stereo music on Linux side. Debian uses ALSA Audio aoutomaticly. I've already asked Debian forums but noone able to solve my problem, so I decided to ask here with my last hope.
What I tried:
1- used ''speaker-test -c 2'' terminal code & I've seen this message
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 5.823448
2- Checked Debian's Audio Settings, everything seems normal.
3- Installed Pulse Audio, but it used Alsa base so nothing chanced. In Pulse Volume Control Panel, I saw I've got only Mono Output. But I there is no section for change to stereo.
4- Uninstalled ALSA & installed OSS4 but OSS4 simply doesn't work. So turned back to ALSA.
5- My stereo works only with headphone on Debian.

Drill Out Problem with drill down

Hello,
help needed.
I have two workbooks. The first consists of a hierachical Rowset. This workbook ist stored complettly collapsed.
When I open it in Portal and use the option "analyze" and after that follow a drillout link to the second workbook it works.
When I open it in Portal and use the option "analyze" open one level of the hierarchy and after that follow a drillout link to the second workbook the "save dialog" apears. If I answer yes I get an error and also if the answer is no.
I also set in the discoverer\configuration.xml the flag saveWorkBehavior="never_save" nothing (still asking).
Logging level is none
Discoverer 10.1.2.48.18 with patch 5729515
Can anybody can give me a solution, workaround or hint
Application.log
07/01/09 14:54:18 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.ApplicationController._logException error.handling.event
oracle.discoverer.applications.framework.ApplicationException: error.handling.event
     at oracle.discoverer.applications.framework.GlobalExceptionHandler.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:553)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:486)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
     at oracle.discoverer.applications.framework.RawRequest.populateParameters(Unknown Source)
     at oracle.discoverer.applications.framework.RawRequest.<init>(Unknown Source)
     at oracle.discoverer.applications.framework.RawRequest.initDeferredRequest(Unknown Source)
     at oracle.discoverer.applications.framework.RawRequest.<init>(Unknown Source)
     at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     ... 14 more

Hi user 552235...
I am not sure if my next post will help you, since I am not working with portal, but I had a problem with drill to link in the same disco version (10.1.2.48.18) and the problem solved after applying patch 5507746 for bug 5475467.
You can read more in metalink with the number I supplied you and try in a test environment of course...
Hope this will help you solving your problem, if it does please update the thread for the rest of our community...
Gidi Halamish

Huge Problems with WD Mycloud... files disappearing...

I recently installe done of these in a small clients office (they have 4 or 5 users) and wanted a simple storage device. I had used these before andf they loooked good so I bought one. It has been a huge embarrassment and I hope you can help me resolve my users issues. Here is the behavior described to me:I had a file saving problem in FileA. It could have been around 5:41. Detailed: - The original file was saved in the "FolderA" folder in Share1 (saved there on Tuesday). - I hit save and it said it could not be saved. I hit okay, and then save again, and it said "file not saved". - I copy/pasted the data into a new, blank document, and closed the original file. When I tried to reopen the original it told me Excel cannot open this file, it may be corrupted. - I saved the copy/pasted version to my desktop and continued working in that. My client is repeatedly going back to using their desktops becaus eof saving and corrupt file frustratiopns on wd mycloud.Firmware is up to date.Please help.

If one maps the WD My Cloud through WD2Go.com connection to their local computer then there will be problems with saving and opening files on or to the WD My Cloud. The problem actually lies with Microsoft Office in that case. If you have mapped the drive(s) through WD2Go.com then see the following explanation from WD Support and a workaround to the problem if connecting remotely through WD2Go.com. Microsoft Office documents in a device connected through WD My Cloud Remote Web Access cannot be opened If both the client computers and the WD My Cloud device are both on the same local network, there is no need to map the drive through the WD2Go interface and one should be able to save/open Microsoft Office documents on the WD My Cloud. See the WD Support documents below for directions on how to map a WD My Cloud that is on the local network (not remotely). How to map a WD My Cloud or NAS product on a Windows PCMapping a drive letter on a WD Network hard drive using WD Discovery

In CP5 - problem with the 'Paste as Background' option

Hi,
Since I have started working with CP5 I am having issues with the 'Paste as Background' option.
After I work with CP5, and use the option few times it disappears from the menu although I have an image copied to my clipboard.
After I close Captivate and re-open it, the option appears again.
Any ideas?
Thanks,
Merav.

merav, have you run the recent update for CP5? It fixed a lot of issues with the Background issues.
Also, the Paste as background option is not there if you have "Use Master slide background" checked for the slide. It defaults to "on" if you copy slides, for instance.

TV-out problem with a Qosmio G20 - Scart option disappeared

Similar Messages

Maybe you are looking for