TV output from nano 5G

I have cable from Boxwave that says that it will connect my Nano 5G to composite video. It connects to the sync connection, not to the headphone jack.
I have tried two of them but I always get the message that the attachment is not supported and I can not output to the tv. I know that the tv inputs work.
How can I connect my nano 5g to my television? Does someone make a cable that works.

This one will work if you want a Component connection:
http://store.apple.com/us/product/MB128LL/B?fnode=MTY1NDA0OQ&mco=MTA4MjUwNDc
This one will work if you want a Composite connection:
http://store.apple.com/us/product/MB129LL/B?fnode=MTY1NDA0OQ&mco=MTA4MjUwMzk
Make sure you buy the correct cable for your TV, as they are NOT interchangeable.
Ian

Similar Messages

No audio slideshow on output to TV from nano

I have the Apple Composite AV Cable which I'm using to output from my new Nano (with video) to my TV. For movies it plays the video and sound, but for slideshows I can only see the video (no audio portion) even though I've selected a playlist in the settings for photos. Any suggestions?

I am having a similar problem. I can play movies and tv shows just fine using the composite cables hooked up to my tv, but when I try to play songs, it does not work.
I have tried just plugging in the audio cables, but that does not seem to help.
Additionally, and this is quite strange, if I plug in the video composite cables that are hooked up to my DVD player but keep the ipod audio cables plugged in, I can play songs from the ipod - but only if actually playing a DVD. It defies my understanding.

No sound output from Maxell iPod dock

Just purchased a Silver 8GB Nano, Maxell iPod dock, and the Scosche PassPort/Adapter for 5th generation iPods, all as a gift set. The Maxell dock now charges the Nano with the Scosche adapter, but there is no music signal out of the dock's 3.5mm jack. In fact, the Nano's internal speaker remains on while sitting on the dock, charging.
I have reset the device many times using center + menu, with no changes.
Headphones plugged into the Nano's 3.5mm jack work perfectly, but no output from the Maxell dock.
Anyone used this dock, with or without a 5th gen Nano, or have any tips to fix this? I am still waiting on a reply from Maxell via email, but I doubt that will happen until next week...

I have the same problem with a 5th Generation iPod on a Jensen JiMS-195 Universal Docking Station for iPod. The sound is great using the Auxiliary jack, but I only get sound through the internal iPod speakers when it's docked. I have checked the Apple site and the Jensen site, but no luck.
Is there some setting on the iPod to change this behavior or is the dock the problem? Any response would be welcome.

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Unable to output from FCP to Canon XL1.

I have an eMac with Final Cut Pro 4.5 HD. I also have a Canon XL1 3 CCD camcorder.
I have no problem capturing footage from my camcorder to my eMac on FCP. I can also connect my Canon to my VCR and record off my camcorder to my TV, as well as play the tape on my camcorder to watch it on TV.
However, I cannot output from FCP to my camcorder. The 4 to 6 FireWire is attached to both the camera and the eMac and I checked the Log and Capture feature and FCP does recognize a camera or deck is attached. I've been trying to output it using manual record in which I press record on my camcorder and play the playhead on FCP. As I record, there is no picture on my viewfinder, nor any audio being recorded and when I play it back, I just get this blank blue screen, but the timecode is recorded.
Am I missing something here?

ensure the following are set
View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
View>Audio Playback>Audio follows video
View>External Video>All Frames
If this isn't what you are set to do, you won't be sending video out to your recorder.
x

How to Generate CSV Output from JD Edwards BI Publisher

Hi All,
I have a report "Critical Date Report" - R15611 in JD Edwards 8.11. This report has to be generated as CSV output from BI Publisher which is embedded to JDE.
The purpose we want use BI Publisher is to move some of the data displaying to different place in the page(ex: Move the company address from top left corner to Bottom right corner).
In order to achieve this
1.We created blank rtf template and upload to XML repository using P95600 application
2.Create report definition using P95620 application
3.Here I see the available output types as PDF,RTF,HTML,EXCEL,POWERPOINT and XML,ETEXT(GRAYED OUT)
Which output type we can use for CSV ?
4.Execute the report definition of the critical date report from P95620 to get the XML source
5.This XML source will be loaded into the blank rtf template
6.From this point no idea how to design the rtf template in order to get the CSV output.
7.We did design and output type as excel - but the result data is not in good formatting and alignment*(Headers and footers are repeating).*
If any one has worked on similar type of requirement,let us know how to do or send a sample XML source,rtf template and how the CSV output will be. Or any document link present in Oracle site will be helpful. Please let me know if you need more details.
Thanks in Advance.
Vijay

Hi Vijay,
For CSV output, you need an E-text template (not RTF) that's why its grayed out! You can use Excel as output type and have (No headers and footers) , then you can open the file in Excel and store it as CSV. Does not always display correctly though.
Why are you compelled to use BI publisher? you can use the JDE standard csv output report, (as is used by most EDI systems) of course this may involve a bit of customization if you wants the fields arranged differently.
-Domnic

Error message by periodic weekly: No output from the 1 file processed

Hi there,
since four weeks, I got a problem with the maintenance script periodic weekly. Up to December 22nd, the script did, what it should do: rebuilding the database of locate and whatis, rotating log-files. Since one week later, I got the error message: No output from the 1 file processed.
Normally, I use Anacron to do the job. When I noticed the problem, I tried to start the script with Tinker Tool System getting the same result. Another try using the Terminal (sudo periodic weekly) also failed. The commands locate and whatis are working, locate.updatedb and makewhatis also. I'm running 10.4.8; in the past, I did not have such problems. Anyone with an idea or solution?
Thanks
Klaus
MacBook Pro Mac OS X (10.4.8)

Hi Gary,
here is the output you were asking for:
Last login: Thu Jan 25 20:03:55 on console
Welcome to Darwin!
DeepThought:~ dirk$ sudo /private/etc/periodic/weekly/500.weekly; echo $?
Password:
Sorry, try again.
Password:
Rebuilding locate database:
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
makewhatis: /usr/share/man/man1/fetchmailconf.1.gz: No such file or directory
Rotating log files: ftp.log lpr.log mail.log netinfo.log ipfw.log ppp.log secure.log
access_log error_log
Running weekly.local:
Rotating psync log files:/etc/weekly.local: line 17: syntax error near unexpected token `)'
/etc/weekly.local: line 17: `if [ -f /var/run/syslog.pid ]; then kill -HUP 0 80 79 81 0cat /var/run/syslog.pid | head -1); fi'
2
DeepThought:~ dirk$ ls -loe /private/etc/periodic/weekly/500.weekly
-r-xr-xr-x 1 root wheel - 2532 Jan 13 2006 /private/etc/periodic/weekly/500.weekly
DeepThought:~ dirk$
It seems, Rogers idea, PsynX respectively the deficient uninstalling by me is responsible for my problems, is correct. Should I remove the whole file weekly.local or should I only remove the content? I prefer removing the whole file, because it was created while installing PsyncX. The date of creation is the same as the date of installing the app (December 25).
Klaus
By the way: it seems to me, the solution of my problem is in sight. So I want to thank you all for the amazing aid I got from you!

Changing the seeded rdf report output from text to PDF

Hi All,
I am trying to change the seeded report "Print Requisition Report" output from text to PDF. I changed the output format in the concurrent program definition from text to pdf. The report is now getting displayed in pdf format, but the alignment of the fields are changed. The output is not printing as it was printing while in the text output format. The output looks very sloppy, with uneven fonts and too much of text wrapping.
I tried some formatting and fields are somehow getting displayed but doesnt look in proper format. I am not able to change the font style in the report builder 6i, even if i change it is printing in the same font style with uneven font size. I think reducing the font size might help, but i am unable to change.We are on 11.5.10.2. Please provide your valuable suggestions on how to go about.
Thanks
Sarvesh

Hi Hussein,
Thanks for the information. After the adjustments in the layout and the font change the report is now getting displayed without any clipping when clicked on view output. But when the same report is printed some characters on the left and and right side is getting clipped. Please help on how to solve this issue.
Thanks,
Sarvesh

How to capture graphical outputs from other programs

Does anyone know how we capture the graphical outputs from the other programs and show them
on the swing?
I'd like to use a java program to run gnuplot, capture the outputs, and show them using swing.

Depends on what you mean by "graphic outputs".
Taking a quick glance at the gnuplot homepage, it looks as if you can output to PNG files, so just run the app, and load the png file.

JDev generated webservices encodes XML output from PL/SQL procedure

I have a PL/SQL packaged procedure which takes some input parameters and produces one output parameter. The output parameter is of type CLOB and after the procedure has run, it contains a big piece of XML data.
Using JDeveloper 10.1.3.1, I've published this packaged procedure as a webservice. The generated webservice is fine and works, except for one tiny little issue: the XML that is taken from the output parameter is encoded.
Here is an example of the SOAP message that the webservice returns:
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://gbv0300u/GBV0300U.wsdl/types/"><env:Body><ns0:gbv0300uResponse
Element><ns0:result><ns0:obvglijstOut> & gt;type>GBV0001& gt ;/type& lt;
& gt;diensten& lt;
& gt;dienst>some value& gt;/dienst& lt;
& gt;/diensten& lt;
</ns0:obvglijstOut></ns0:result></ns0:gbv0300uResponseElement></env:Body></env:Envelope>
(I've manually added an extra space between the & and lt; or gt; to make sure a browser will not translate it into a < or >!)
The contents of the <ns0:obvglijstOut> element are filled with the output parameter from the PL/SQL package.
How can I change the generated webservice, so the output from the PL/SQL package is used as is instead of being encoded?

Update: I've tested a bit more by adding some output statements to the java code that JDeveloper generated. I'm now 100% sure the PL/SQL code gives the XML data correctly to the webservice.
At this moment my guess is that somewhere in the WSDL definition there is something that enables the encoding of the data. But I'm not sure.
Any help is greatly appreciated.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

I am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. please help

i am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. Thank you for any advice.

What output are you trying to get to your tv?

Reading the output from a object running in the local machine.

Reading the output from a object running in the local machine.
By using a signed applet i am lunching a small application that returns an image object, how to read that without storing it in the hard disk.
Which means i need to read the image object return by the local application using applet or jsp .
i am using tomacat and an html page with an applet with it to lunch the application.

You can write that image in a binary format using OutputStream for System.out and then read it in your applet.

Getting the output from a Perl script using Runtime.exec

I cannot get the output from a perl script using Java. Can someone PLEASE help?
I used the following code:
Process p = Runtime.getRuntime().exec("C:\\Perl\\bin\\Perl.exe script.pl) ;
InputSream in = p.getInputStream();
b...
do
System.out.println(b);
while ((b = in.read()) > 0)
But there is no way that I get the output in the inputstream. If I use the command "cmd script.pl", the output is displayed in the Dos box, but also not in the inputstream.
I will appreciate any help.

Try this
Process p = Runtime.getRuntime().exec("C:\\Perl\\bin\\Perl.exe script.pl) ;
BufferedReader rd = new BufferedReader(new InputStreamReader(p.getInputStream()));
String str;
while((str=rd.readLine())!=null){
System.out.println(str);
Manu

TV output from nano 5G

Similar Messages

Maybe you are looking for