Tv picture on guide

hi all
this is my first post.
can you turn the tv picture off on the tv guide. like you can on the sky+ box.

jezhodges wrote:
Something funky has happened here. Our vision box still has the old look, with the transparent menu and tv guide.
However, I saw this picture on the BT website showing how the new Vision looks.
What is wierd/funky is we still have the look on the left but with the menus from the right (Replay (Catch Up), My Vision, etc.) So its the old look with the new functionality. Cool. 
The menus can be updated without updating the firmware.

Similar Messages

  • Clamshell digital picture project/problem the computer sleepy !!

    Hello friends it is my first post to the board. Not sure if it the right place. I am in a mess with my old clamshell ibook ( firewire, DVD-Rom, 366mhz , macOs 9.2) which I took apart to make a digital picture display. The disassembly was easy as per help from Fixit guide. Now I have put together the unit to get it into the box for display, but when I turn on the computer the unit turns on and I see that desktop with hard drive and the curser which is accessible but the computer goes to sleep within 15-20 seconds. touching any key brings it back but only to go back to sleep mode again. Playing with the curser does not keep it awake!
    The computer worked perfectly before I disassembled it. It seems that the sleep button is somehow gone into a loop. Or something to do with hinges/cables that I took apart during disassembly. i did try to be careful in keeping the parts together and took pictures to guide me. I would appreciate any thoughts or help that anyone can provide.
    thank you.
    karl

    This just an addition to my last evening's post. I was able to start the computer with the original CD. The finder and the desktop works for a little longer approx.40-45 secs and the sleep mode takes over again. Subsequent wake up periods from sleep which occurs easily does not last any longer that few secs. Any ideas as to whether it is software or hardware based problem.
    Thanks.

  • Where can i find E55 disassembly guide?

    Hello,
    I searched the net but couldn't find any pictured tutorial / guide or any video (even on Youtube) that shows how to disassemble my E55?
    Is there anybody who knows such video or article for E55?
    Thanks a lot!

    aspergerguy,
    I don't get it! I need an disassembly video to fix my phone myself, why is publishing such links forbidden? I don't want any circuit schema or secret, just a guide to reach my phone's screen and keypad to replace it due to **bleep** parts manufactured by Nokia.
    I don't want to deliver my phone to amateur Nokia Care technicians for a simple replacement process.
    Hope you got it and help me 'if' you can.

  • GUID(Globally Unique Identifier)

    Hi All,
    Can you give me the complete picture of GUID. What is exact role of GUID. If possible, explain with examples?
    Thanks in advance...

    Hi,
       GUIDs are system-generated. The 32-char guid is generated by a hashing algorithm based on the OS used, the different hardware being used in the abap server and so on.
    Once a GUID is created (e.g. function
    GUID_CREATE
    ) for a particular record, it remains the same throughout the life of that record and will be ineffective only when the record is deleted. This will uniquely identify a particular record and is usually the primary key of a table. So, there is no question of the guid field of a table being changed.
    With respect to the Bdoc errors, are you referring to the Bdoc ids? Bdoc ids will again be unique. Only the extension parts of the Bdoc will reveal the corresponding guids of the underlying records which the Bdoc represents.
    I hope I have given you a simple understanding of guids.
    Reward if helpful.
    Regards,
    Sudipta

  • Error while activating Transformation CO_OM_WBS_3

    Hi everybody,
    i get the following error message while activating the transformation for  CO_OM_WBS_3 in Dev
    Error while activating transformation
    Message no. RSTRAN510
    Error when writing routines
    i checked the routine for co_om_wbs_3 the syntex was correct.
    i have checked in forum am not getting clear picture  please guide me and
    sap component version : SAP EHP 1 for SAP NetWeaver 7.0
    SAP_BW    7010006    SAPKW70106
    BI_CONT    704   0006  SAPK-70406INBICONT
    Regards,
    Sunder

    Dear anand,
    thankyou
    Regards,
    sunder
    Edited by: sundersham on Mar 28, 2010 12:34 PM

  • Getting a runtime error when using a standard Form Interface

    I am getting this Error analysis:
    The following syntax error was found in the program /1BCDWB/SAPLSM00000212 :
    "Field "VBRK-WAERK" is unknown. It is neither in one of the specified t"
    "ables nor defined by a "DATA" statement. ."
    The problem is, I am using a standard interface INVOICE_INTERFACE for a custom form. Why am I getting this error? Where in my form should I declare VBRK-WAERK for my program to work?

    Here are some troubleshooting steps that will help you isolate and fix this problem:
    Create a Z-copy of the INVOICE_INTERFACE (ex. ZIF_SD_INVOICE).  Use this interface in your custom form (ex. ZFRM_SD_INVOICE).
    OPTIONAL: In your custom form, deactivate all of the fields you are not using.  This will minimize the amount of work in the next steps.
    In your custom interface, go to the Currency/Quantity Fields section.  There are 88 currency fields in the stock interface, but only 12 of them are defined in this section.  At this point you have options:
    If you still have fields that are active, but not listed here, you will have to enter them.
    If you didn’t deactivate anything, you will have to define the remaining 76 fields here.
    Use the interface at the bottom and deactivate the CMPRE_FLT field in your Adobe Form. It can be found in the PAYMENT_CARDS table contained in the HEAD_DETAIL structure of the interface.  The other CURR and QUAN fields are all defined in this interface.  The pictures will guide you to that field in your form. 

  • [SOLVED] LIRC no input with Hauppauge PVR-350

    Hey guys
    I have the hardware mentioned in the title in a computer connected with the tv (for xbmc)
    I recently have re-setup archlinux on this machine to get a clean systemd setup but now Im really stuck getting my remote working again. Sady I forgot to backup my configuration (theres always something that you forget isnt it)^^
    configs
    /etc/systemd/system/lircd.service
    [Unit]
    Description=Linux Infrared Remote Control
    [Service]
    EnvironmentFile=/etc/conf.d/lircd.conf
    ExecStartPre=/usr/bin/ln -sf /run/lirc/lircd /dev/lircd
    ExecStart=/usr/sbin/lircd --pidfile=/run/lirc/lircd.pid --device=${LIRC_DEVICE} --driver=${LIRC_DRIVER}
    Type=forking
    PIDFile=/run/lirc/lircd.pid
    [Install]
    WantedBy=multi-user.target
    /etc/conf.d/lircd.conf
    LIRC_DEVICE="/dev/input/event11"
    LIRC_DRIVER="devinput"
    LIRC_MODULES="ir-kbd-i2c lirc_dev"
    LIRC_EXTRAOPTS=""
    LIRC_CONFIGFILE="/etc/lirc/lircd.conf
    /etc/lirc/lirc.conf
    # this config file was automatically generated
    # using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
    # contributed by
    # brand:   Hauppauge 350
    # Created: G.J. Werler (The Netherlands)
    # Project: Mythtv Fedora Pundit-R www.mythtvportal.com
    # Date:    2004/11/28
    # model no. of remote control: Hauppauge A415-HPG
    # devices being controlled by this remote: PVR-350
    begin remote
      name  Hauppauge_350
      bits           13
      flags RC5|CONST_LENGTH
      eps            30
      aeps          100
      one           969   811
      zero          969   811
      plead        1097
      gap          114605
      toggle_bit      2
          begin codes
              Go                       0x00000000000017BB
              Power                    0x00000000000017BD
              TV                       0x000000000000179C
              Videos                   0x0000000000001798
              Music                    0x0000000000001799
              Pictures                 0x000000000000179A
              Guide                    0x000000000000179B
              Radio                    0x000000000000178C
              Up                       0x0000000000001794
              Left                     0x0000000000001796
              Right                    0x0000000000001797
              Down                     0x0000000000001795
              OK                       0x00000000000017A5
              Back/Exit                0x000000000000179F
              Menu/i                   0x000000000000178D
              Vol+                     0x0000000000001790
              Vol-                     0x0000000000001791
              Prev.Ch                  0x0000000000001792
              Mute                     0x000000000000178F
              Ch+                      0x00000000000017A0
              Ch-                      0x00000000000017A1
              Record                   0x00000000000017B7
              Stop                     0x00000000000017B6
              Rewind                   0x00000000000017B2
              Play                     0x00000000000017B5
              Forward                  0x00000000000017B4
              Replay/SkipBackward      0x00000000000017A4
              Pause                    0x00000000000017B0
              SkipForward              0x000000000000179E
              1                        0x0000000000001781
              2                        0x0000000000001782
              3                        0x0000000000001783
              4                        0x0000000000001784
              5                        0x0000000000001785
              6                        0x0000000000001786
              7                        0x0000000000001787
              8                        0x0000000000001788
              9                        0x0000000000001789
              Asterix                  0x000000000000178A
              0                        0x0000000000001780
              #                        0x000000000000178E
              Red                      0x000000000000178B
              Green                    0x00000000000017AE
              Yellow                   0x00000000000017B8
              Blue                     0x00000000000017A9
          end codes
    end remote
    $ sudo systemctl restart lircd.service
    $ irw
    [I can press what I want, nothing]
    $ sudo ir-keytable
    Found /sys/class/rc/rc0/ (/dev/input/event11) with:
        Driver ir-kbd-i2c, table rc-hauppauge
        Supported protocols: RC-5
        Enabled protocols: RC-5
        Name: i2c IR (Hauppauge WinTV PVR-350
        bus: 24, vendor/product: 0000:0000, version: 0x0000
        Repeat delay = 500 ms, repeat period = 125 ms
    Any help is appreciated!
    Last edited by chnuebi (2013-02-12 12:20:01)

    Hell YEAH!!
    /etc/systemd/system/lircd.service
    [Unit]
    Description=LIRC Daemon
    After=network.target
    [Service]
    Type=forking
    EnvironmentFile=/etc/conf.d/lircd.conf
    PIDFile=/run/lirc/lircd.pid
    ExecStartPre=/bin/mkdir -p /run/lirc
    ExecStartPre=/bin/rm -f /dev/lircd
    ExecStartPre=/bin/rm -f /run/lirc/lircd
    ExecStartPre=/bin/ln -s /run/lirc/lircd /dev/lircd
    ExecStart=/usr/sbin/lircd -d $LIRC_DEVICE -P /run/lirc/lircd.pid -H $LIRC_DRIVER $LIRC_CONFIGFILE
    ExecStopPost=/bin/rm -f /dev/lircd
    ExecStopPost=/bin/rm -fR /run/lirc
    [Install]
    WantedBy=multi-user.target
    In addition it seems i loaded the wrong driver.
    /etc/conf.d/lircd.conf
    LIRC_DEVICE="/dev/lirc0"
    LIRC_DRIVER="default"
    #LIRC_MODULES="ir-kbd-i2c lirc_dev"
    #LIRC_MODULES="lirc_i2c lirc_dev"
    LIRC_EXTRAOPTS=""
    LIRC_CONFIGFILE="/etc/lirc/lircd.conf"
    /etc/modules-load.d/lirc.conf
    #ir-kbd-i2c
    lirc_i2c
    lirc_dev
    so /dev/lirc0 gets created (did it over /dev/input)
    Thank you soo much -> moving forward to xbmc mappings (8

  • Crop Mark Actions?

    Hi,
    Is it possible to create an action that creates crop marks based on the guides? I usually have a picture with guides set on the outside of the picture, than I create "mirror edge" and extend the canvas for an 1". Than I create crop marks based on the guides, crop marks are about 0.75" long (from the edge of the canvas it's 0.75" long, inwards) and I use 3px grey brush to paint it.
    I would love to automate the whole "crop marks drawing" process but I have no scripting experience. Any idea if it's possible?
    Thanx,
    Peter

    Becasue I have a preference for Paths I used a Vector Mask so that in a pdf they would still output as vector.
    // create crop mark layer based on four guides;
    // works only if there are only four guides, two vertical, two horizontal;
    // 2011, use it at your own risk;
    #target Photoshop
    if (app.documents.length > 0) {
    var myDocument = app.activeDocument;
    // set to points;
    var originalRulerUnits = app.preferences.rulerUnits;
    app.preferences.rulerUnits = Units.POINTS;
    var theGuides = myDocument.guides;
    // proceed only if four guides;
    if (theGuides.length == 4) {
    var theVer = new Array;
    var theHor = new Array;
    // collect horizontal and vertical guides;
    for (var m = 0; m < theGuides.length; m++) {
    if (theGuides[m].direction == Direction.HORIZONTAL) {theHor.push(Number(theGuides[m].coordinate))}
    else {theVer.push(Number(theGuides[m].coordinate))};
    theHor.sort(function(a,b){return b - a});
    theHor.reverse();
    theVer.sort(function(a,b){return b - a});
    theVer.reverse();
    // proceed only if two horizontal and vertical guides;
    if (theHor.length == 2 && theVer.length == 2) {
    // half width of marks;
    var halfWidth = 0.01 * 72;
    var theLong = 1 * 72;
    var theShort = 0.25  * 72;
    // create array of rectangle points;
    var theArray = new Array;
    // ther verticals;
    theArray.push( [
    [ [Number (theVer[0]) - halfWidth, Number (theHor[0]) - theLong ] ],
    [ [Number (theVer[0]) + halfWidth, Number (theHor[0]) - theLong ] ],
    [ [Number (theVer[0]) + halfWidth, Number (theHor[0]) - theShort ] ],
    [ [Number (theVer[0]) - halfWidth, Number (theHor[0]) - theShort ] ],
    true, ShapeOperation.SHAPEXOR
    theArray.push( [
    [ [Number (theVer[1]) - halfWidth, Number (theHor[0]) - theLong ] ],
    [ [Number (theVer[1]) + halfWidth, Number (theHor[0]) - theLong ] ],
    [ [Number (theVer[1]) + halfWidth, Number (theHor[0]) - theShort ] ],
    [ [Number (theVer[1]) - halfWidth, Number (theHor[0]) - theShort ] ],
    true, ShapeOperation.SHAPEXOR
    theArray.push( [
    [ [Number (theVer[0]) - halfWidth, Number (theHor[1]) + theLong ] ],
    [ [Number (theVer[0]) + halfWidth, Number (theHor[1]) + theLong ] ],
    [ [Number (theVer[0]) + halfWidth, Number (theHor[1]) + theShort ] ],
    [ [Number (theVer[0]) - halfWidth, Number (theHor[1]) + theShort ] ],
    true, ShapeOperation.SHAPEXOR
    theArray.push( [
    [ [Number (theVer[1]) - halfWidth, Number (theHor[1]) + theLong ] ],
    [ [Number (theVer[1]) + halfWidth, Number (theHor[1]) + theLong ] ],
    [ [Number (theVer[1]) + halfWidth, Number (theHor[1]) + theShort ] ],
    [ [Number (theVer[1]) - halfWidth, Number (theHor[1]) + theShort ] ],
    true, ShapeOperation.SHAPEXOR
    // the horizontals;
    theArray.push( [
    [ [Number (theVer[0]) - theLong, Number (theHor[0]) + halfWidth ] ],
    [ [Number (theVer[0]) - theLong, Number (theHor[0]) - halfWidth ] ],
    [ [Number (theVer[0]) - theShort, Number (theHor[0]) - halfWidth ] ],
    [ [Number (theVer[0]) - theShort, Number (theHor[0]) + halfWidth ] ],
    true, ShapeOperation.SHAPEXOR
    theArray.push( [
    [ [Number (theVer[1]) + theLong, Number (theHor[0]) + halfWidth ] ],
    [ [Number (theVer[1]) + theLong, Number (theHor[0]) - halfWidth ] ],
    [ [Number (theVer[1]) + theShort, Number (theHor[0]) - halfWidth ] ],
    [ [Number (theVer[1]) + theShort, Number (theHor[0]) + halfWidth ] ],
    true, ShapeOperation.SHAPEXOR
    theArray.push( [
    [ [Number (theVer[0]) - theLong, Number (theHor[1]) + halfWidth ] ],
    [ [Number (theVer[0]) - theLong, Number (theHor[1]) - halfWidth ] ],
    [ [Number (theVer[0]) - theShort, Number (theHor[1]) - halfWidth ] ],
    [ [Number (theVer[0]) - theShort, Number (theHor[1]) + halfWidth ] ],
    true, ShapeOperation.SHAPEXOR
    theArray.push( [
    [ [Number (theVer[1]) + theLong, Number (theHor[1]) + halfWidth ] ],
    [ [Number (theVer[1]) + theLong, Number (theHor[1]) - halfWidth ] ],
    [ [Number (theVer[1]) + theShort, Number (theHor[1]) - halfWidth ] ],
    [ [Number (theVer[1]) + theShort, Number (theHor[1]) + halfWidth ] ],
    true, ShapeOperation.SHAPEXOR
    var thePath = createPath (theArray, "cropmarks");
    // create fill layer;
    makeFillLayer("cropmarks", 100, 100, 100, 100);
    thePath.remove()
    else {(alert ("document does not have the required number of guides"))};
    app.preferences.rulerUnits = originalRulerUnits;
    ////// function to create path from array with one array per point that holds anchor, leftdirection, etc, 2010 //////
    function createPath (theArray, thePathsName) {
    var originalRulerUnits = app.preferences.rulerUnits;
    app.preferences.rulerUnits = Units.POINTS;
    lineSubPathArray = new Array ();
    if (theArray[theArray.length - 1].constructor != Array) {var numberOfSubPathItems = theArray.length - 1}
    else {var numberOfSubPathItems = theArray.length};
    for (var b = 0; b < numberOfSubPathItems; b++) {
              var lineArray = new Array ();
              for (c = 0; c < (theArray[b].length - 2); c++) {
                        lineArray[c] = new PathPointInfo;
                        if (!theArray[b][c][3]) {lineArray[c].kind = PointKind.CORNERPOINT}
                        else {lineArray[c].kind = theArray[b][c][3]};
                        lineArray[c].anchor = theArray[b][c][0];
                        if (!theArray[b][c][1]) {lineArray[c].leftDirection = theArray[b][c][0]}
                        else {lineArray[c].leftDirection = theArray[b][c][1]};
                        if (!theArray[b][c][2]) {lineArray[c].rightDirection = theArray[b][c][0]}
                        else {lineArray[c].rightDirection = theArray[b][c][2]};
              lineSubPathArray[b] = new SubPathInfo();
              lineSubPathArray[b].closed = theArray[b][theArray[b].length - 2];
              lineSubPathArray[b].operation = theArray[b][theArray[b].length - 1];
              lineSubPathArray[b].entireSubPath = lineArray;
    var myPathItem = app.activeDocument.pathItems.add(thePathsName, lineSubPathArray);
    app.preferences.rulerUnits = originalRulerUnits;
    return myPathItem
    ////// the fill-layer-function //////
    function makeFillLayer (a, b, c, d, e) {
    var idMk = charIDToTypeID( "Mk  " );
        var desc6 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref2 = new ActionReference();
            var idcontentLayer = stringIDToTypeID( "contentLayer" );
            ref2.putClass( idcontentLayer );
        desc6.putReference( idnull, ref2 );
        var idUsng = charIDToTypeID( "Usng" );
            var desc7 = new ActionDescriptor();
            var idNm = charIDToTypeID( "Nm  " );
            desc7.putString( idNm, a );
            var idType = charIDToTypeID( "Type" );
                var desc8 = new ActionDescriptor();
                var idClr = charIDToTypeID( "Clr " );
                    var desc9 = new ActionDescriptor();
                    var idCyn = charIDToTypeID( "Cyn " );
                    desc9.putDouble( idCyn, b );
                    var idMgnt = charIDToTypeID( "Mgnt" );
                    desc9.putDouble( idMgnt, c );
                    var idYlw = charIDToTypeID( "Ylw " );
                    desc9.putDouble( idYlw, d );
                    var idBlck = charIDToTypeID( "Blck" );
                    desc9.putDouble( idBlck, e );
                var idCMYC = charIDToTypeID( "CMYC" );
                desc8.putObject( idClr, idCMYC, desc9 );
            var idsolidColorLayer = stringIDToTypeID( "solidColorLayer" );
            desc7.putObject( idType, idsolidColorLayer, desc8 );
        var idcontentLayer = stringIDToTypeID( "contentLayer" );
        desc6.putObject( idUsng, idcontentLayer, desc7 );
    executeAction( idMk, desc6, DialogModes.NO );

  • I am stuck in guided access and I don't remember my password.  How do I get out of it without losing all of my picture and apps and such?

    I am stuck in guided access and I don't remember my password.  How do I get out of it without losing all of my picture and apps and such?

    Connect the iPod to its syncing computer and restore via iTunes.  If the iPod asks for the passcode and you can't enter the passcode or if you do not have the syncing computer, place the iPod in recovery mode and then restore.  For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Yikes, Box is Working but no picture or sound...tv guide is showing current though....

    Ok, I checked the tv, it works fine with vcr, so the pic and audio is good. the box is functioning, changing channels and such. the guide comes on to tell you what is on at that time and shows current, but no picture or sound....whats up with this??? I am in FL. Thanks for any help!
    C-

    You might want to check your Fios TV page on the website to see if it says "Your STB record cannot be found". I started having this problem today. Everything was fine last night. I got forwarded from Verizon to somewhere else where they were supposed to add my boxes back in. The individual said it was done and I should have the picture back momentarily. I waited 1 and a half hours. Called back. gave them the "M" numbers for my 2 boxes. They said it would take up to 24 hours to get the picture back. Unfortunately that doesn't help me when their is boxing on tonight that I want to watch. If it is not fixed in time for football tomorrow I am not going to be happy.

  • Does anyone know how I might be able to access picture frame in IOS 6 while in Guided Access mode..?

    Does anyone know how I might be able to access Picture Frame while being in Guided Access mode..?

    I don't exactly understand your issue but if your stuck in guided access press and hold the power and home until you see your device turns off keep holding then when you see the apple startup logo let go (this is called a hard reset or a respring) this will force you out of guided access and into the home screen where you can unlock the device with out being stuck in guided access
    If this does not help you please ignore this comment

  • I can no longer import pictures from photos to shutterfly? Can someone guide me?

    When I had iphoto I was able to upload pictures form my events onto shutterfly. Now, with this new prgram, photos, I am unable to down load photos into shutterfly. Can someone help with this issue?

    You should e able to see the Photos Library in any file chooser dialog panel in the sidebar.
    When you select files for uploading on the webpage, scroll the file chooser panel down, until you are seeing the "Media" section in the sidebar. Click the "Photos" icon and select the "Photos" library.  That will work, if your current Photos library has been enabled as the system Photos Library. The option to make it the system photo library is in the Photos Preferences > General. If this option is disabled, your library is already the System Photos library.

  • How to switch to ADE 1.6 - complete install guide with pictures

    BooksOnBoard.com today (Monday, Sept 22) created a complete install guide to help readers download and install the new ADE 1.6, including some of the nuances such as the Flash download. It can be found at http://www.booksonboard.com/index.php?F=adobe1.6_help. If you click on the major headings, you will be taken further down the page to the illustrations. Everyone is welcome to use it whether or not they buy their eBooks from BooksOnBoard.

    Nice.
    However, I have to note that linking directly to the Flash Player is a Flash Player EULA violation. You have to send folks through http://www.adobe.com/go/getflashplayer..
    Regards,
    Bentley Wolfe
    Senior Support Engineer, Flash/Flash Player/Digital Editions
    Adobe

  • ThinkPad T431s User Guide & Pictures

    See: http://servicekb.lenovo.com.cn/KnowledgeResources/2013-01-15/092998/ThinkPad%20431s用户指南V1.0.pdf For all infos and pictures. Announcement will be maybe around March timeframe.
    Pictures:

    Does anyone know when this computer is due to be released?  Will it be soon or not until Intel Haswell ships (rumoured to be June 2013)?
    I make extensive use of docks in our company and I am really interested in this computer to get users into Ultrabook-ish dimensions while maintaining "classic" dock compatabiltiy and a physical Ethernet port.
    Current: ThinkPad Tablet 2 | 64GB // ThinkPad T440s | i7-4600U | 12GB | 512GB SSD | FHD MT
    Previous: ThinkPad T420s // ThinkPad T410s

  • How do you make a picture bigger to fit ruler guides, without losing quality.

    i put ruler guides to make a half inch border around my document and i have an image but i want to make it bigger to cover the entire square. How can i do this without pixelating my image its 900x1440. thanks

    You can get a very nice upsampled result by using Photoshop CC's detail-preserving upsampling setting in the Image - Image Size dialog.
    -Noel

Maybe you are looking for