TV picture Pauses for a split second

Every 30 seconds or so my TV pictiure pauses for a very brief 1/2 second. Anyone seeing this?

I contacted a rep as well and they said a fix will be sent out the 15th of this month. She stated that she could send out a fix but it only works 50% of the time and from the other 50% the DVR will not reboot sometimes. So I'm dealing with it until this fix supposidly comes out on the 15th of March. I switched from DirecTV about 3 weeks ago because I was tired of the interuptions do to the slightest bit of rain and I have had the freezing problem with Verizon since the first day.

Similar Messages

All of my Itunes songs keeps going in and out for a split second

Every time I am using Itunes lately on my Imac the songs go in and out or pause for a split second. I do not understand why this is happening - it happens on old songs and new songs that I have purchased.
PLEASE HELP!!!

The linki LéonieDF gave for the rebuild workflow was for iPhoto 8 (09) and earlier. For iPhoto 11 this is the workflow to follow:
Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Air (13-inch, Mid 2012) (Technical Specifications)
    MacBook Air - model: MacBookAir5,2
    1 1.8 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Mitsumi Electric Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [running]    com.mcafee.menulet.plist [Click for support]
    [running]    com.mcafee.reporter.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
    [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
    [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    TouchP-150M    Application (/Applications/Canon P-150M/TouchP-150M.app)
    iPhoto    Application (/Applications/iPhoto.app)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
    WDSecurityHelper    Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    FUSE for OS X (OSXFUSE) [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    NTFS-3G [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
    Destinations:
        My Passport Edge for Mac [Local]
        Total size: 499.94 GB
        Total number of backups: 27
        Oldest backup: 2013-01-31 21:15:26 +0000
        Last backup: 2015-05-02 11:33:09 +0000
        Size of backup disk: Adequate
            Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    fontd
         2%    VShieldScanManager
         0%    taskgated
         0%    notifyd
Top Processes by Memory: ℹ️
    745 MB    Google Chrome Helper(8)
    439 MB    kernel_task
    246 MB    VShieldScanner(3)
    160 MB    Google Chrome
    127 MB    Finder
Virtual Memory Information: ℹ️
    130 MB    Free RAM
    3.87 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 09:30:08 PM    Self test - passed
    May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
    May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
    May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
    May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
    May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
    May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
    May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
    May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
    May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
    May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
    May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
    May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
    May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
    May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
    May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
    May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
    May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
    May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
    May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
    May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
    May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
    May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
    May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
    May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
    May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
    May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
    Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

I have an Ipad 2, I recently downloaded IOS 7.0.4, now when I open up Safari to search the internet it will come up for a split second then dissapear and take me back to the home screen. So it wont even let me search for anything.

So can anyone tell me how to fix this problem? I cant surf the web because as soon as I click on the Safari icon it will pop up for a split second then dissapear and take me to the Ipad homescreen. This happened when I downloaded the IOS 7.0.4. I have the IPAD 2.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

[SOLVED] Xorg Strangeness- Running startx runs xorg for a split second

As in the subject, I am trying to run startx on my Arch (x86_64) machine for the first time since installation, however X only runs for a split second before quitting.. I've checked the log, but there aren't any errors that pop up to tell me what's going on. What I've been doing that I think may affect the answer:
Installed proprietary nvidia drivers that I downloaded off of nvidia's website (though I removed it by running sudo ./driver.run -uninstall)
Installed nvidia drivers from the repository (sudo pacman -S nvidia nvidia-utils)
shut off nouveau drivers (blacklisted nouveau in /etc/modprobe.d)
Ran nvidia-xconfig to generate new xorg.conf file
/var/log/Xorg.0.log shows nothing with (EE), so I assume that everything is going smoothly, however still can't get X to work. Any help would be appreciated. Google's let me down so far.
Perhaps some fresh eyes could help me
(contents of /var/log/Xorg.0.log)
[ 22.116]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 22.116] X Protocol Version 11, Revision 0
[ 22.116] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 22.116] Current Operating System: Linux Ponyville 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64
[ 22.117] Kernel command line: root=/dev/sda4 ro
[ 22.117] Build Date: 30 May 2012 07:24:13PM
[ 22.117]
[ 22.117] Current version of pixman: 0.26.0
[ 22.117] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.117] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.119] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 7 08:50:45 2012
[ 22.148] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.148] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.166] (==) ServerLayout "Layout0"
[ 22.166] (**) |-->Screen "Screen0" (0)
[ 22.166] (**) | |-->Monitor "Monitor0"
[ 22.166] (**) | |-->Device "Device0"
[ 22.166] (**) |-->Input Device "Keyboard0"
[ 22.166] (**) |-->Input Device "Mouse0"
[ 22.166] (==) Automatically adding devices
[ 22.166] (==) Automatically enabling devices
[ 22.196] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 22.196] Entry deleted from font path.
[ 22.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.196] Entry deleted from font path.
[ 22.196] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 22.196] Entry deleted from font path.
[ 22.213] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.213] Entry deleted from font path.
[ 22.213] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.213] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/
[ 22.213] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.213] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 22.213] (WW) Disabling Keyboard0
[ 22.213] (WW) Disabling Mouse0
[ 22.213] (II) Loader magic: 0x7c58e0
[ 22.213] (II) Module ABI versions:
[ 22.213] X.Org ANSI C Emulation: 0.4
[ 22.213] X.Org Video Driver: 12.0
[ 22.213] X.Org XInput driver : 16.0
[ 22.213] X.Org Server Extension : 6.0
[ 22.214] (--) PCI:*(0:1:0:0) 10de:0dc4:196e:085a rev 161, Mem @ 0xf8000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 22.214] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.214] (II) LoadModule: "extmod"
[ 22.257] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.264] (II) Module extmod: vendor="X.Org Foundation"
[ 22.264] compiled for 1.12.2, module version = 1.0.0
[ 22.264] Module class: X.Org Server Extension
[ 22.264] ABI class: X.Org Server Extension, version 6.0
[ 22.265] (II) Loading extension MIT-SCREEN-SAVER
[ 22.265] (II) Loading extension XFree86-VidModeExtension
[ 22.265] (II) Loading extension XFree86-DGA
[ 22.265] (II) Loading extension DPMS
[ 22.265] (II) Loading extension XVideo
[ 22.265] (II) Loading extension XVideo-MotionCompensation
[ 22.265] (II) Loading extension X-Resource
[ 22.265] (II) LoadModule: "dbe"
[ 22.265] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.265] (II) Module dbe: vendor="X.Org Foundation"
[ 22.265] compiled for 1.12.2, module version = 1.0.0
[ 22.265] Module class: X.Org Server Extension
[ 22.265] ABI class: X.Org Server Extension, version 6.0
[ 22.265] (II) Loading extension DOUBLE-BUFFER
[ 22.265] (II) LoadModule: "glx"
[ 22.266] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.799] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.799] compiled for 4.0.2, module version = 1.0.0
[ 22.799] Module class: X.Org Server Extension
[ 22.799] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 22.799] (II) Loading extension GLX
[ 22.799] (II) LoadModule: "record"
[ 22.799] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.885] (II) Module record: vendor="X.Org Foundation"
[ 22.885] compiled for 1.12.2, module version = 1.13.0
[ 22.885] Module class: X.Org Server Extension
[ 22.885] ABI class: X.Org Server Extension, version 6.0
[ 22.885] (II) Loading extension RECORD
[ 22.885] (II) LoadModule: "dri"
[ 22.885] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.911] (II) Module dri: vendor="X.Org Foundation"
[ 22.911] compiled for 1.12.2, module version = 1.0.0
[ 22.911] ABI class: X.Org Server Extension, version 6.0
[ 22.911] (II) Loading extension XFree86-DRI
[ 22.911] (II) LoadModule: "dri2"
[ 22.911] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.911] (II) Module dri2: vendor="X.Org Foundation"
[ 22.911] compiled for 1.12.2, module version = 1.2.0
[ 22.911] ABI class: X.Org Server Extension, version 6.0
[ 22.911] (II) Loading extension DRI2
[ 22.911] (II) LoadModule: "nvidia"
[ 22.912] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.993] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.993] compiled for 4.0.2, module version = 1.0.0
[ 22.994] Module class: X.Org Video Driver
[ 23.021] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 23.021] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.021] (--) using VT number 7
[ 23.024] (II) Loading sub module "fb"
[ 23.024] (II) LoadModule: "fb"
[ 23.024] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.032] (II) Module fb: vendor="X.Org Foundation"
[ 23.032] compiled for 1.12.2, module version = 1.0.0
[ 23.032] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.032] (II) Loading sub module "wfb"
[ 23.032] (II) LoadModule: "wfb"
[ 23.032] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23.038] (II) Module wfb: vendor="X.Org Foundation"
[ 23.038] compiled for 1.12.2, module version = 1.0.0
[ 23.038] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.038] (II) Loading sub module "ramdac"
[ 23.038] (II) LoadModule: "ramdac"
[ 23.038] (II) Module "ramdac" already built-in
[ 23.047] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 23.047] (==) NVIDIA(0): RGB weight 888
[ 23.047] (==) NVIDIA(0): Default visual is TrueColor
[ 23.047] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.047] (**) NVIDIA(0): Enabling 2D acceleration
[ 23.817] (II) NVIDIA(GPU-0): Display (ViewSonic VA1916wSERIES (CRT-1)) does not support
[ 23.817] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 23.831] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:1:0:0 (GPU-0)
[ 23.831] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 23.831] (--) NVIDIA(0): VideoBIOS: 70.06.13.00.51
[ 23.831] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 23.831] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 23.833] (--) NVIDIA(0): Connected display device(s) on GeForce GTS 450 at PCI:1:0:0
[ 23.833] (--) NVIDIA(0): ViewSonic VA1916wSERIES (CRT-1)
[ 23.833] (--) NVIDIA(0): ViewSonic VA1916wSERIES (CRT-1): 400.0 MHz maximum pixel
[ 23.833] (--) NVIDIA(0): clock
[ 23.868] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 23.868] (**) NVIDIA(0): device ViewSonic VA1916wSERIES (CRT-1) (Using EDID
[ 23.868] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 23.874] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 23.874] (==) NVIDIA(0):
[ 23.874] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 23.874] (==) NVIDIA(0): will be used as the requested mode.
[ 23.874] (==) NVIDIA(0):
[ 23.874] (II) NVIDIA(0): Validated modes:
[ 23.874] (II) NVIDIA(0): "nvidia-auto-select"
[ 23.874] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 23.903] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 23.903] (--) NVIDIA(0): option
[ 23.903] (--) Depth 24 pixmap format is 32 bpp
[ 23.903] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 23.903] (II) NVIDIA: access.
[ 23.906] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 23.906] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 23.906] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 23.906] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 23.906] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 23.906] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 23.906] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 23.906] (II) NVIDIA(0): Config Options in the README.
[ 23.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 23.952] (II) Loading extension NV-GLX
[ 24.017] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 24.017] (==) NVIDIA(0): Backing store disabled
[ 24.017] (==) NVIDIA(0): Silken mouse enabled
[ 24.017] (**) NVIDIA(0): DPMS enabled
[ 24.017] (II) Loading extension NV-CONTROL
[ 24.017] (II) Loading extension XINERAMA
[ 24.017] (II) Loading sub module "dri2"
[ 24.017] (II) LoadModule: "dri2"
[ 24.017] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.017] (II) Module dri2: vendor="X.Org Foundation"
[ 24.017] compiled for 1.12.2, module version = 1.2.0
[ 24.017] ABI class: X.Org Server Extension, version 6.0
[ 24.017] (II) NVIDIA(0): [DRI2] Setup complete
[ 24.017] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 24.017] (==) RandR enabled
[ 24.017] (II) Initializing built-in extension Generic Event Extension
[ 24.017] (II) Initializing built-in extension SHAPE
[ 24.017] (II) Initializing built-in extension MIT-SHM
[ 24.017] (II) Initializing built-in extension XInputExtension
[ 24.017] (II) Initializing built-in extension XTEST
[ 24.017] (II) Initializing built-in extension BIG-REQUESTS
[ 24.017] (II) Initializing built-in extension SYNC
[ 24.017] (II) Initializing built-in extension XKEYBOARD
[ 24.017] (II) Initializing built-in extension XC-MISC
[ 24.017] (II) Initializing built-in extension SECURITY
[ 24.017] (II) Initializing built-in extension XINERAMA
[ 24.017] (II) Initializing built-in extension XFIXES
[ 24.017] (II) Initializing built-in extension RENDER
[ 24.017] (II) Initializing built-in extension RANDR
[ 24.017] (II) Initializing built-in extension COMPOSITE
[ 24.017] (II) Initializing built-in extension DAMAGE
[ 24.018] (II) Initializing extension GLX
[ 24.296] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.296] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.296] (II) LoadModule: "evdev"
[ 24.296] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.304] (II) Module evdev: vendor="X.Org Foundation"
[ 24.304] compiled for 1.12.0, module version = 2.7.0
[ 24.304] Module class: X.Org XInput Driver
[ 24.304] ABI class: X.Org XInput driver, version 16.0
[ 24.304] (II) Using input driver 'evdev' for 'Power Button'
[ 24.304] (**) Power Button: always reports core events
[ 24.304] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 24.304] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.304] (--) evdev: Power Button: Found keys
[ 24.304] (II) evdev: Power Button: Configuring as keyboard
[ 24.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 24.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.304] (**) Option "xkb_rules" "evdev"
[ 24.304] (**) Option "xkb_model" "evdev"
[ 24.304] (**) Option "xkb_layout" "us"
[ 24.317] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.317] (II) Using input driver 'evdev' for 'Power Button'
[ 24.317] (**) Power Button: always reports core events
[ 24.317] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 24.317] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.317] (--) evdev: Power Button: Found keys
[ 24.317] (II) evdev: Power Button: Configuring as keyboard
[ 24.317] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 24.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 24.317] (**) Option "xkb_rules" "evdev"
[ 24.317] (**) Option "xkb_model" "evdev"
[ 24.317] (**) Option "xkb_layout" "us"
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event10)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.318] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 24.318] (II) No input driver specified, ignoring this device.
[ 24.318] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 24.319] (II) No input driver specified, ignoring this device.
[ 24.319] (II) This device may have been added with another device file.
[ 24.319] (II) config/udev: Adding input device UVC Camera (046d:09a1) (/dev/input/event5)
[ 24.319] (**) UVC Camera (046d:09a1): Applying InputClass "evdev keyboard catchall"
[ 24.319] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a1)'
[ 24.319] (**) UVC Camera (046d:09a1): always reports core events
[ 24.319] (**) evdev: UVC Camera (046d:09a1): Device: "/dev/input/event5"
[ 24.319] (--) evdev: UVC Camera (046d:09a1): Vendor 0x46d Product 0x9a1
[ 24.319] (--) evdev: UVC Camera (046d:09a1): Found keys
[ 24.319] (II) evdev: UVC Camera (046d:09a1): Configuring as keyboard
[ 24.319] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input5/event5"
[ 24.319] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a1)" (type: KEYBOARD, id 8)
[ 24.319] (**) Option "xkb_rules" "evdev"
[ 24.319] (**) Option "xkb_model" "evdev"
[ 24.319] (**) Option "xkb_layout" "us"
[ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 24.320] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 24.320] (**) Logitech USB Receiver: always reports core events
[ 24.320] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 24.320] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 24.320] (--) evdev: Logitech USB Receiver: Found keys
[ 24.320] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 24.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/input/input3/event3"
[ 24.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 24.320] (**) Option "xkb_rules" "evdev"
[ 24.320] (**) Option "xkb_model" "evdev"
[ 24.320] (**) Option "xkb_layout" "us"
[ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 24.320] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 24.320] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 24.320] (**) Logitech USB Receiver: always reports core events
[ 24.320] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 24.320] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 24.320] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 24.320] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 24.320] (--) evdev: Logitech USB Receiver: Found relative axes
[ 24.320] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 24.320] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 24.320] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 24.320] (--) evdev: Logitech USB Receiver: Found keys
[ 24.320] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 24.320] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 24.320] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 24.320] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 24.320] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.1/input/input4/event4"
[ 24.320] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 24.320] (**) Option "xkb_rules" "evdev"
[ 24.320] (**) Option "xkb_model" "evdev"
[ 24.320] (**) Option "xkb_layout" "us"
[ 24.320] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 24.320] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 24.320] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 24.320] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 24.320] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 24.320] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 24.320] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 24.320] (II) No input driver specified, ignoring this device.
[ 24.320] (II) This device may have been added with another device file.
[ 24.321] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[ 24.321] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 24.321] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 24.321] (**) Eee PC WMI hotkeys: always reports core events
[ 24.321] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event2"
[ 24.321] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 24.321] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 24.321] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 24.321] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input2/event2"
[ 24.321] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 24.321] (**) Option "xkb_rules" "evdev"
[ 24.321] (**) Option "xkb_model" "evdev"
[ 24.321] (**) Option "xkb_layout" "us"
[ 24.497] (II) evdev: Power Button: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Power Button: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: UVC Camera (046d:09a1): Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Logitech USB Receiver: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Logitech USB Receiver: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.497] (II) evdev: Eee PC WMI hotkeys: Close
[ 24.497] (II) UnloadModule: "evdev"
[ 24.680] Server terminated successfully (0). Closing log file.
Contents of Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by Glupoi652 (2012-06-07 20:51:53)

windscape wrote:
wgetfree wrote:It may be a stupid question but do you have all the Xorg dependencies?
It may even be simpler than that. If this is a new installation, a desktop environment or window manager may not be installed. In that case, the Xorg server has nothing to do. Install a desktop environment or window manager and see if Xorg continues running once it has something to do.
Listen to this man. What I meant by Xorg dependencies is that people usually install xterm, xclock, etc so they have a very basic WM set up so they can see that Xorg is in fact working. Try setting up a .xinitrc with the following in it:
exec startxfce4 --with-ck-launch
Or even try to launch it manually with:
$ startxfce4

ITunes doesn't open and agreement page opens for a split second then leaves

Hi well i posted this thread a while back but never got a response soo I though maybe if I post a new one you would see me, sorry if im a burden but I really need the help. Okay well i just uninstalled iTunes because I already had problems with it but now, I just got my iPod and installed the cd on my computer.Then I click on iTunes and the agreement page comes up for one split second then exits out.Well heres all my Inof.I have Norton Anti Virus 2005, Windows XP, Microsoft Firewall (off), i have service pack 2 for microsoft and all the necessary updates are downloaded. I didnt download the optional upgrades only the ones that said were needed. please help me.
-Danny =]
Sony Vaio Windows XP i like cs and itunes and warcraft ALOT =)

HI danny!
sorry you got no response last time. PPLE post and post and post and before you know it, your thread is buried six feet deep under other threads.
Ok, so you described your problem to me. I think its a particular malware program thats going around and it causes exactly what you described. BUT, because you do have Nortan 2005, its QUITE possible that is the culprit. Norton and itunes dont play nice together. Norton thinks its a malicious program and blocks it from opening. Its a pain, i know, but First, try turning OFF norton before you launch iTunes and report back to me about what happens.
Cheers,
Rachyl

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

You're very welcome!
I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive).

Why does my media appear offline for a split second? It's messing up my exports! FCP 7.0.3

Every so often, while I'm working, I'll see some of my media go red, with the slash, just for a split second. Just a red flicker almost. It doesn't require me to reconnect or anything, which is weird, as FCP usually makes me go through all the steps of reconnecting.
I'm working off of servers, managed through EditShare. I work for a local TV station, so I don't know all the ins and outs of our network. But this isn't the real problem....The issue above doesn't really matter. I don't even notice it happen most of the time. But, I believe it's the root of my real problem.
You see, I like to use "Share..." instead of export, which lets me continue to edit other things while it background exports in a small, floating window. THE PROBLEM is if my media 'flickers' during a 'share export' I get the red 'MEDIA OFFLINE' page in my video. If I 'Share' it again, it always comes out fine. But that 'MEDIA OFFLINE' page has made it to TV occasionally.
VERY embarrassing. And nobody wants to hear it only happened because I wanted save time.
So, I'll just have to double-check EVERY clip I export this way, which is super annoying. Anyone have any advice?

You might try doing a "send" to compressor, instead of share, which also allows you to continue working. But it might have the same problem. I don't work with shared storage and I generally prefer to do a self contained export at current settings (which if your project is fully rendered is pretty fast) and then bring it into compressor for compression which allows me to continue working. But I do occasionally use the "send" to compressor function (again without shared storage) continue editing, and have never seen this problem

Iphone 6 stuck on Logo screen with flash of screen for a split second then back to logo screen :(

I purchase my Iphone 6 Roughly a month ago. Last night it died so I plugged it in and this morning it is stuck on the Apple logo screen and flashes to a red screen for a split second then back to the Applelogo screen. I have not done any updates since purchase. I have tried the power and home buttons together and simotaneously with no result PLEASE HELP!!!

Hi ptina78,
As someone who uses and depends on my iPhone on a daily basis, I know I would be upset if my phone did not start up properly. Let's see if we can get you back up and running. If your iPhone is not completing its startup sequence and you continute to see the Apple logo on the display, you may need to reinstall the iOS operating system on the iPhone. This article tells how -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Specifically -
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Qosmio F20: MCE picture freezes for a few seconds

my f20 my media centre tv picture freezes for a few seconds then the processors fan kicks in and the picture comes back. is this connected I have checked the ariel on other devices and the signal is ok

Hello
In my opinion the picture freezes for a few seconds because the CPU starts a new background process. As far as I know similar issues occur if the CPU performance usage goes to 100%.

When i home share my itunes music from my macbook pro to my apple tv 3, it cuts out every 10-15 seconds for a split second. HELP PLEASE!

Hi, I'm running mountain lion of a macbook pre 13 inch. I have connected my new apple tv 3 to it so that i can home share my music to play on my apple tv. Every 10 or 15 seconds, the song with cut out or drop out for a split second, then continue. Though it can be looked past, it is so annoying! Advise would be much appriciated.

Sorry i also forgot to add that my macbook pro is a few years old, and i use a program called airparrot to airplay videos, but i beleive that airplay and home sharing is totally different..correct me if i'm wrong. thanks.

Safari freezes for a split second constantly

Hi, my safari freezes for a split second when scrolling up and down a page before resuming all the time, it also does it whilst streaming video like youtube, So its briefly starts/stops, really starting to annoy me, can anyone help?
thanks
R

had this come up from tech tool deluxe,
how do I find and check recently installed hardware?
Video RAM
Failed
Video RAM, as all components of your video circuitry, must be fully functional for graphics to be properly displayed. Damaged VRAM can cause missing bits, screen noise, system lock ups, or freezes. TechTool Deluxe tests the VRAM on the Macintosh main logic board, as well as some third-party video cards.
If the VRAM test should fail, try these steps in order and run the test again after each step:
o Quit all other applications.
o Restart the system.
o Check any recently-added hardware for proper installation.
o Run the computer from another volume (if available).
o Reinstall the OS.
o Contact AppleCare.

Only in iTunes when I click next song or close iTunes mid song the sound jitters for a split second. That is when I actively click on a functional button. This does not happen when I let the song end and flow into another song. Any ideas?

I have disabled sound check, crossfade and in quicktime settings in control panel audio is set to 16 bit.
The jitter/stutter is like a blip. If i press next track it will cut the sound from the previous track momentarily then resume from where I stopped it for a split second before proceeeding to the next track.

Outlook provides the keyboard shortcut of Ctrl + < (Last item) and Ctrl + > (Next item) to view the message after we open the email item.
Tony Chen
TechNet Community Support

TV picture Pauses for a split second

Similar Messages

Maybe you are looking for