[TV@Plus] Can't install drivers in win XP pro sp2

I can't install the drivers of that tv@nywhere plus.  I tried it on different computers = same results.  Tried the msi driver on web site = same results.  I have the following message " The tv@nywhere WDM Driver Installation Failed ".  Is it the card or what ?  Sent an email to MSI = no answer.  Do I have to return it and buy a better card (not from MSI)....Tried in 4 different computers....HELP ME SOMEONE !!!

I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd.  The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR.  The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd.  They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...)  Really confused !!!  Tried in different PCI slots.  Do you think it's a card or chips (physically) problem, at your advice ?  I'm not at my first computer installation, and it's the first time I see this problem.  I'm in computers since 6 years and never seen that before.  Help me please...........

Similar Messages

  • Can I install full retail Win 8 Pro on a Lenovo R500 with a Win 7 Pro preload?

    Lenovo does not support Windows 8 on the R500. Can someone please tell me why.
    When Windows 8 became available, I ran out and purchased a copy to install on my R500, foolishly thinking that Lenovo would support the upgrade on its older machines as it had previously, whenever a new release of Windows had become available in the past.
    I was quite surprised to not find that my R500 was not supported.
    So, will Windows 8 install, or will the installation fail? What functions would give me problems? Obviously, the touch screen functions won’t work, but can I attach an external touch screen?
    Is the problem a hardware deficiency or is it a software deficiency?  
    So, do I have a useless Win 8 software box? I hope someone out there has an explanation.
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

    Hi Chuck,
    R500 is a pretty old model and i guess Lenovo like other manufacturers cannot support all the old models for every new Windows version. So they have to draw a line somewhere and the R500 is too old.
    Windows 8 should install fine, but you might find that there are some drivers which is not available for your computer. You might find that some features do not work because of missing drivers and software for Windows 8.
    I never had a R500 and usually upgrade my computer every year so i cannot say for sure what might not be working. Some of the drivers might be available from other manufacturers like Intel.
    I'm sure your Windows 8 won't be useless as you will probably buy a new computer in the close future since the R500 is pretty old. At least Windows 8 is pretty cheap compared to earlier upgrades from Microsoft. The Windows 8 compatibility list from Lenovo been available for pretty long and the R500 never been listed.
    gan

  • In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

    in which boot camp support software I can install the drivers for win 7 32 bit.
    my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
    also my macbook pro model is MC723.

    Read this. You need to be running Snow Leopard or later.
    http://support.apple.com/kb/ht3986

  • Boot Camp won't update, no Bluetooth, can't install drivers, see OS X DVD

    I have a client who has a whole mess:
    Mac Mini Core2Duo running Leopard 10.5.6
    Boot Camp 1.4 Beta
    Vista
    Inserting the OS X DVD produces nothing, can't see it, can't open it, can't install drivers from OS X Install Disc 1.
    Can't update Boot Camp to 2.1 (update never executes no matter how long you wait after dblclick)
    No Bluetooth in Vista, anywhere. Mighty Mouse somehow works but no scrolling with the ball.
    Won't run Apple Bluetooth Installer.exe
    My only recommendation at this point is to delete the Windows partition and start from scratch, and put XP back on instead of Vista, hoping that we'll be able to update Boot Camp to 2.1 and put the drivers on from the OS X Install Disc 1 that came with the Mini. This is fairly difficult to explain or even comprehend on my part, and I've been doing this for decades.
    Anybody have a hint for me?

    Oh nevermind. I was doing this via remote and as it works out, some people don't know if they have Leopard or Tiger.

  • Can't install drivers. unknown error

    gents,
    I suddenly can't install drivers so that my new iLok and my Logitech USB-Dongle aren't working. I did a backup of all drivers from another Win7x64 systemdrive and extracted them. The Drivers were working on that system and am there.
    Still I got a FILE NOT FOUND or similar error.
    I checked the SETUPAPI.DEV.LOG which I copied below. Can anyone see what's the problem with the iLok driver f.e. ?
    [Device Install Log]
    OS Version = 6.1.7601
    Service Pack = 1.0
    Suite = 0x0100
    ProductType = 1
    Architecture = amd64
    [BeginLog]
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . inf: {SetupCopyOEMInf: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.097
    . sto: {Import Driver Package: d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf} 21:18:40.098
    . sto: Importing driver package into Driver Store:
    . sto: Driver Store = C:\Windows\System32\DriverStore (Online | 6.1.7601)
    . sto: Driver Package = d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf
    . sto: Architecture = amd64
    . sto: Locale Name = neutral
    . sto: Flags = 0x00000000
    . sto: Copying driver package files to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'.
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
    . flq: SourceFilename - 'ilok-x64.cat'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
    . flq: SourceFilename - 'WdfCoInstaller01007.dll'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok'
    . flq: SourceFilename - 'oem43.inf'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {FILE_QUEUE_COPY}
    . flq: CopyStyle - 0x00000000
    . flq: SourceRootPath - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64'
    . flq: SourceFilename - 'iLokDrvr.sys'
    . flq: TargetDirectory- 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64'
    . flq: {FILE_QUEUE_COPY exit(0x00000000)}
    . flq: {_commit_file_queue}
    . flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=4
    . flq: {_commit_copy_subqueue}
    . flq: subqueue count=4
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok]
    . flq: SourceFile - [ilok-x64.cat]
    . flq: Flags - 0x00000000
    . flq: {_commit_copyfile}
    . flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\ilok-x64.cat'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
    . flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD0.tmp'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\ilok-x64.cat'
    . flq: {_commit_copyfile exit OK}
    . flq: {_commit_copyfile}
    . flq: CopyFile: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
    . flq: MoveFile: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\SET4AD1.tmp'
    . flq: to: 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\oem43.inf'
    . flq: {_commit_copyfile exit OK}
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
    . flq: SourceFile - [WdfCoInstaller01007.dll]
    . flq: Flags - 0x00000000
    . flq: source media:
    . flq: SourcePath - [d:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64]
    . flq: SourceFile - [WdfCoInstaller01007.dll]
    . flq: Flags - 0x00000000
    . flq: {_commit_copyfile}
    !!! flq: Error installing file (0x00000002)
    ! flq: SourceFile - 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll'
    ! flq: TargetFile - 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'
    . flq: {SPFQNOTIFY_COPYERROR}
    !!! sto: Failed to copy file 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\amd64\WdfCoInstaller01007.dll' to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}\amd64\WdfCoInstaller01007.dll'. Error = 0x00000002
    . flq: {SPFQNOTIFY_COPYERROR - returned 0x00000000}
    !!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
    . flq: {_commit_copyfile exit(0x000003e3)}
    . flq: {_commit_copy_subqueue exit(0x000003e3)}
    !!! flq: FileQueueCommit aborting!
    . flq: {_commit_file_queue exit(0x000003e3)}
    !!! sto: Failed to copy driver package to 'C:\Users\Acme\AppData\Local\Temp\{537c06b8-bd1f-0a73-a162-7e7ef27e1a3e}'. Error = 0x00000002
    . sto: {Import Driver Package: exit(0x00000002)} 21:18:40.125
    . inf: Opened INF: 'd:\__treiber\_p67extreme6_win\drpsupacker\drp\dongles\ilok\oem43.inf' ([strings])
    ! inf: Add to Driver Store unsuccessful
    !!! inf: returning failure to SetupCopyOEMInf
    . inf: {SetupCopyOEMInf exit (0x00000002)} 21:18:40.251
    !!! ndv: Driver Package import failed for new device...installing NULL driver.
    . dvi: {Plug and Play Service: Device Install for USB\VID_088E&PID_5036\3088A22A_7C39126D}
    . ump: Creating Install Process: DrvInst.exe 21:18:40.266
    ! ndv: Installing NULL driver!
    . dvi: Set selected driver complete.
    . dvi: {DIF_ALLOW_INSTALL} 21:18:40.333
    . dvi: No class installer for 'iLok'
    . dvi: No CoInstallers found
    . dvi: Default installer: Enter 21:18:40.334
    . dvi: Default installer: Exit
    . dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 21:18:40.334
    . dvi: {DIF_INSTALLDEVICE} 21:18:40.334
    . dvi: No class installer for 'iLok'
    . dvi: Default installer: Enter 21:18:40.335
    ! dvi: Installing NULL driver!
    . dvi: Writing common driver property settings.
    . dvi: {Restarting Devices} 21:18:40.351
    . dvi: Restart: USB\VID_088E&PID_5036\3088A22A_7C39126D
    . dvi: Restart complete.
    . dvi: {Restarting Devices exit} 21:18:40.562
    . dvi: Default installer: Exit
    . dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 21:18:40.563
    . ump: Server install process exited with code 0x00000000 21:18:40.567
    . ump: {Plug and Play Service: Device Install exit(00000000)}
    . ndv: {Update Driver Software Wizard exit(00000002)}

    update. I also post the SETUPAPI.APP.LOG:
    [Device Install Log]
    OS Version = 6.1.7601
    Service Pack = 1.0
    Suite = 0x0100
    ProductType = 1
    Architecture = amd64
    [BeginLog]
    [Boot Session: 2014/12/29 20:54:19.610]
    >>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:39.855
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    cpy: Policy is set to make all digital signatures equal.
    <<< Section end 2014/12/29 21:18:39.857
    <<< [Exit status: SUCCESS]
    >>> [Build Driver List - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:39.862
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    cpy: Policy is set to make all digital signatures equal.
    ! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
    ! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
    <<< Section end 2014/12/29 21:18:40.093
    <<< [Exit status: SUCCESS]
    >>> [DIF_SELECTBESTCOMPATDRV - USB\VID_088E&PID_5036\3088A22A_7C39126D]
    >>> Section start 2014/12/29 21:18:40.093
    cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
    <<< Section end 2014/12/29 21:18:40.093
    <<< [Exit status: SUCCESS]

  • I can`t install drivers for Promise IDE on WINXP.

    Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
    And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
    PS. Sorry for my bad english.

    Quote
    Originally posted by Athlon1000
    But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
    That's correct  
    So if I do not misunderstand you, Windows hangs when accessing the drive?
    Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
    Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
    If it works there you should use this configuration.
    I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
    What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
    I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
    Maybe you give it a try  
    PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

  • Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

    Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant  v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
    What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
    Here's what I've tried...
    -removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
    -removed all external devices only things plugged in are my usb keyboard and DVI monitor
    -deleting and recreating the partition
    -I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
    Computer:
      Model Name:          Mac Pro
      Model Identifier:          MacPro2,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          8 MB
      Memory:          10 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP21.007F.B06
      SMC Version (system):          1.15f3
    No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
    Many, many, many thanks!
    Curtis
    OKC, OK

    Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
    Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
    -Curtis

  • Can I 'move' my current Win XP Pro sytem into boot camp?

    Searched high and low, but haven't been able to find an answer to this.
    Can I 'move' my current Windows XP Pro SP2 installation into the Boot Camp Partition of one of the new iMacs?
    By 'move' I mean something like ghosting/backing up the current C drive and then restoring it into the boot camp partition.
    I'm relatively tech savvy (at least on the Windows side) so fiddling with / re-installing drivers etc shouldn't be a problem (as long as Windows comes up and recognizes at least the keyboard)
    Thanks

    You should download and play with Parallels Desktop for Mac. Not as a final solution, but as an in between. they have some utilities for moving Windows machines and images into virtual machines and also utilities for moving between virtual machines and boot camp - so some combination of those might be the solution you're looking for.
    Personally, I just run XP and Vista in Parallels - it works perfectly.
    http://www.parallels.com/en/products/desktop/

  • Can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts.

    can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts (10.6.3 retail). Lion installer starts normally. What's a problem?

    I have the same trouble, I try installing rEFI but when I try start my Pro from DVD doesn't recognize.
    Can I start from USB Memory? with files from SL DVD? or have some thing else?
    I have original DVD of SL 10.6.3, if I buy the latest stable version, can I install? or the EFI firmware with Lion change again?
    I try to use Lion, more than one week but I can't, and some app that I use for my profession, doesn't work, I really need downgrade to SL.
    Really Thanks for any help.
    Pablo

  • URGENT Cannot install Ora9i rel 2 Client on Win XP Pro SP2

    Hi folks:
    I have a problem installing Oracle 9i in a "clean" machine with Win XP Pro SP2 with .NET 1.1 running on a P4@3GHz and 512MBytes of RAM and 30GBytes of HD free, when I start de UOI only appear de Oracle's splash screen and when I select install/Deinstall products, nothing happens (in the administrator task appear not response and close automatically).
    I read a lot of solutions about this here, always the same result, NOTHING.
    - I rename symcjit.dll to symcjit.old (of course i copied the installation CD at the oracle subdirectory to avoid long directory paths)
    - Install a JDK 1.3 and 1.4 (and deinstall them after and clean the registry)
    - I login on windows with a user name without rare characters.
    After trying all above and more that I've forgotten I try install a older version (8.1.7) but appear this message.
    "There was a problem opening the staging area. Please make sure the 'Source' you have specified is valid"
    of course the source is valid (products.jar) and I edited the oraparam.ini file to change the relative paths to absolute, but the same message appear.
    ¿I'm doing something wrong?¿incompatibilites between Oracle and Windows?
    Thanks for any help, I need to resolve this problem ASAP!

    Could it be a firewall blocking a port that Oracle needs?
    Service Pack 2 for Microsoft Windows XP turns on the firewall by default.
    Unless, there is a conflict somewhere with the installation program and what you already have installed. Such as, do you have a version of some Oracle software already installed?
    Could it be a conflict with the Java runtime? The Oracle Universal Installer uses its own Java VM.
    Have you tried downloading the latest client software for Oracle 9.2 and trying that?

  • Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall and reinstall iTunes. I get the same failure each time.

    Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?

    Hello, rodneywjr. 
    Thank you for visiting Apple Support Communities. 
    Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue. 
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    Jason H. 

  • Can i install gtx titan on mac pro*

    can i install gtx titan on mac pro* help please
    Thanks

    that card does not have:
    • EFI firmware to show a picture under Mac OS X
    • at most two 6-pin aux power cables (the card has one 6 and one 8-pin, and requires BOTH which the Mac Pro cannot accomodate)
    Without substantial modification it will not work under Mac OS X.

  • Is there a version of Logic Pro X that can be installed on a Mac Book Pro with OS X Version 10.7.5 ?

    Is there a version of Logic Pro X that can be installed on a Mac Book Pro with OS X Version 10.7.5 ?

    No.. Logic Pro X requires 10.8.4 or later....
    To Purchase and install Mountain Lion these days.. you must buy a download content code from Apple directly... It is no longer available directly via the Mac App Store as an item you can select and buy...
    If you are in the US then this link will help you...
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • I can't install the new version 7 pro. Always the same error message: QT X is al ready?. What can I do?

    I can't install the new version 7 pro. Always the same error message: QT X is al ready?. What can I do?

    Use this download.
    (58590)

  • Recently purchased a Macbook Pro with screen of retina of 13,3 inches. My question is, can I install the new Final Cut Pro X , is capable of withstanding the app? Or that Final Cut is convenient to install?

    Recently purchased a Macbook Pro with screen of retina of 13,3 inches. My question is, can I install the new Final Cut Pro X , is capable of withstanding the app? Or that Final Cut is convenient to install?

    Generally any Mac made since 2009 can handle FCP X.
    Your small screen is not ideal unless you are young and have good vision.
    However, you needn't ask whether or not your computer is suitable as you can find out yourself by downloading the free 30 day trial.
    http://www.apple.com/finalcutpro/trial/
    In addition, to get you up to speed with FCP X, you can also watch 2 hours of free video tutorials here
    http://www.izzyvideo.com/final-cut-pro-x-tutorial/

Maybe you are looking for