TV Screen goes blank, pixilates, then comes back

We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back.  It is very intermittent, may work fine for hours then will do this for several hours.  All cable connections are tight, tv's are new.  Any other ideas?

Fishermanwr wrote:
We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back.  It is very intermittent, may work fine for hours then will do this for several hours.  All cable connections are tight, tv's are new.  Any other ideas?
Try swapping the connections at the splitter:  The 2 pixilating ones with the 2 that are OK.  See if the problem goes with the switch.  If it does then it's the splitter.  By the way this is strictly a guess.

Similar Messages

  • TS3274 Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

    Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

    Hi Fayed11,
    Welcome to Apple Support Communities.
    You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Have a great day,
    Jeremy

  • How come everytime i add an image to my pages document the screen goes blank and then closes the app?

    How come everytime i add an image to my pages document the screen goes blank and then closes the app?

    Hi Fayed11,
    Welcome to Apple Support Communities.
    You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Have a great day,
    Jeremy

  • IPhone -When I open an email the screen goes blank and then goes to home screen

    When I try to pull an email my screen goes blank and then brings me back to home page. Any experience with that?

    Hi Fayed11,
    Welcome to Apple Support Communities.
    You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Have a great day,
    Jeremy

  • My 27in LED monitor goes black, pops then comes back on

    Brand new 27in LED monitor goes black, popping sound comes from speakers (I think) then comes back on. Plugged into my brand new Macbook Pro 2.2 GHz i7. Unplugged every thing and it still does it. Has most recent firmware. Just started after five days of ownership. Do I need to take it back to the Apple Store?
    JBP

    Had a second-hand TV once (I am cheap -- sue me).  One day the screen went fritzy and the room smelled of ozone.
    Ozone is a big clue with regards to electronic equipment.

  • X-Fi Xtreme Audio - Volume goes low, static, then comes back.

    Hi all, I have a problem that just developed with my sound after 3 years of owning this PC. Is this the infamous static problem with the card or something else I can fix? Thanks.
    I was playing a game the other day when the sound 'cut out'. If I turn the volume on my speakers up louder I can sometimes hear what should be playing, it's very quiet and sometimes distorted. There is also a loud hiss and static when the volume is at standard levels whilst the sound is doing this. Sometimes I can't hear anything if I turn it right up even, it's just the static.
    There have been the odd pop, crackle and even strange noise coming from it on occasion over the last few days.
    After a while it just decides to go back to normal and will work for a while and then do the same thing again. Will happen when playing games or even just on the desktop (listening to music to test this)
    I have unplugged my speakers (2 desk speakers with subwoofer) and put headphones in, they are doing exactly the same thing so it is not the speakers.
    I have updated the drivers. No change.
    I'm baffled. Sometimes even restarted the computer doesn't fix it, it just decides to work again.
    It's almost like it's getting inteference or picking up a staticy radio, and then cuts out again, but obviously i know that's not what it's doing.
    Any solutions or am I looking at buying a new sound card here?
    I'm not using two gfx cards, and the mobo is ASUS p5n-e sli. I have an Nvidia Geforce 8800 GTS gfx card.
    Any other info you need let me know, thanks in advance.
    Oh and I believe it's in PCI. Not PCI-E.

    @Re: X-Fi Xtreme Audio - Volume goes low, static, then comes backu Hi
    Did anyone solve this - I have started getting exactly the same problem today. There is a fairly loud pop and then the sound that normally should be coming form the machine (game or music) is very quiet and distorted. After a short while (a few minutes), it pops again and starts working again. I built this machine a few months ago and this is the first time that I have had this issue. The specs are as follows:
    XFX ATI Radeon HD 5870
    Asus P6X58D Premium Intel X58 Motherboard,
    Intel Core i7 920 D0 Stepping 2.66Ghz (Nehalem)
    Corsair XMS3 6GB (3x2GB) DDR3 PC3-2800C9 (600MHz) Tri-Channel
    Hitachi Deskstar 7K2000 2TB HD
    Intel X25-M Mainstream 80GB SSHD
    X-Fi Fatalty FPS
    The X-Fi card is from my old machine and it worked perfectly in that one.
    Many thanks,
    Dave

  • Tried reset, taking off case, no Bluetooth but sound effects keeps appearing in middle of screen. If I turn down volume it goes away but then comes back. Sometimes immediately. Sometimes in 5 minutes. Am not touching anything on side of iPad at the time

    Cannot get sound effects icon to stop coming on.   When I turn down the volume, the icon goes off briefly and then it comes back on at full volume and stays in the middle of the screen, until I click the volume down again.  Doesn't help to reset, the case is not on and it still does this. Most annoying.

    Tried any basic troubleshooting steps?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

  • Strange red/purple/magenta "shadow" that goes away and then comes back

    I'm having some issues with a weird discoloration that happens inside of LR. 
    When the file is loaded, it looks like this:
    Once you touch ANY slider (or do anything really), this happens:
    Note the weird red/purple/magenta area around her mouth and cheek.
    Anyone have any ideas what this is and how to stop it from happening?   I've had some suggestions that it might be a moire caused by the texture of the veil but it seems odd that LR had it right to being with.
    Any and all suggestions are greatly appreciated. 
    Thanks. 

    Don’t worry about colors that happen with Fit or Fill, because, for speed, LR uses a fast, inaccurate resampling algorithm and what you’re seeing is likely moiré.   However, if you still see it at 1:1 then that is a problem.  Try reducing the Detail slider in Sharpening to 0 and see if that makes a difference to 1:1.
    If you want you can upload one of these images to www.dropbox.com <http://www.dropbox.com>  and post a public download link to it, here, then when the issue is answered, remove it from your dropbox so it doesn’t stay available forever.

  • CPU goes idle and then comes back..why?

    During stress testing we ran 100 concurrent logons and then logoffs with the first 84 user completing this test run in 20 - 30 seconds. During this time both Portal ap1 and ap2 hit 100% utilization on the servers. After the 20 - 30 seconds the portal aps CPU goes idle and the
    remaining 16 users out of the 100 hit a 120 second delay before there request returns processing the test and completes. During this 120 sec delay I see the aps CPU go idles until the 120 sec time expires.
    What is causing this 120 sec delay?

    Hello Vaibhav,
    sorry I have no answer to your question. I want to know what tool you are using to do the stress test. We go live in one week with our EP for CRM and I really want to know if the performance is enough for 120 Users.
    Regards
    Gregor

  • Ipad screen goes black and dont come back

    what should I do?

    Try the following:
    1. Reset: Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo.
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • 6280 Time and date reset screen goes blank

    Whenever I turn my 6280 off at night when I switch it on the next morning the time goes back to 00:00 and the date doesnt change automatically. Called up 3 and they werent much help at all just said to switch auto update of date and time on which I did and it didnt make any difference!!!! Has anyone else had any probs like this?
    Also my phone occasionally cuts out either when I am on the internet or just when I am using it. The screen goes blank and then after a couple of seconds it comes back again. Apparently there is a firmware upgrade for the phone and the version I have at the moment is 3.36 does anyone have any idea where I can get this from??

    Hello linslaf,
    It may help to force close the Messages app, then restart the device.
    iOS: Understanding multitasking
    http://support.apple.com/kb/HT4211
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the issue persists, the next step would be to restore your iiPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • Tecra 8100: solid vertical white & screen goes blank

    Hello,
    My Tecra 8100 has (or used to have) what seems to be a 'known fault': screen goes blank, can be got back by pressing fn+f5 or the little metal button.
    It also acquired a solid vertical white line about 1mm wide and about 30mm from the left hand edge. I managed to stop the blanking (backlight?) problem (thankyou to those who replied to my previous, now locked, question!) by taking the cover off the screen and unplugging and replugging the inverter. So now the screen always stays on. Unfortunately the white line is still there, and whereas previously the screen was normal except for the line, now everything to the right of it (i.e. all but 1" of the screen) is just multicoloured stripes.
    What do you think? I've been told that all the inverter does is power the backlight, which suggests the lines problem is something else. But they happened at the same time. Also, as far as I can remember, when I was fiddling about with the inverter connection the lines problem came and went (then came and stayed). Could it still be a bad inverter connection? Or a broken inverter? Or more likely to be something else?
    cheers,
    George

    If it indeed is a loose connection its really no more difficult then when you undone the display to reconnect the inverter. A few more screws and you will be able to lift the display off the harness and check the connector in that connects the display to the inverter (not the white and pink wires, thats the inverter backlights, but the wire that plugs in to the left side of the inverter and goes up the back of the display and connects to it. It is a flat cable) When you reattach this cable if you choose not to take it to an ASP, make sure to tape it down good so it does not come loose again. After this if the problem is not resolved, your display is broken and will need to be replaced. It can be costly.

  • N93 Screen Goes Blank & Comes Back On (Auto-restar...

    Hi, I have the Nokia N93 black. It says it is made in Finland.
    I have been using it for aboout a year and I got this phone by trading it with my earlier phone. I didn't get the phone as a new item but rather a 2nd-hand trade.
    I have this problem of the screen going blank and comes back (auto-restart) sometimes. It is not very often but from what I observed, it happens usually during a long phone call, not every time, but sometimes.
    I've looked around the in user reviews and forums and it seems that there is quite a lot of problems with the phone. Examples of these problems include auto-restart, auto shut-off, hangs and such. The fortunate part is that my phone doesn't hang.
    I'm using the latest firmware, v20.0.058 and there isn't any updates ever since.
    What do you think? Do you think this is a hardware problem? Do you think I should even be bothered about it? I'm worried because I didn't get it as a new item. Could the earlier user traded because he damaged it?

    It can be either a hardware fault or a software fault.
    To rule out a software fault you'll want to re-install the current firmware with Nokia Software Updater. If that solves the problem then it was a software fault. If not, then it's a hardware fault and you'll need to take the phone in to your nearest Nokia Care Point.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • I have a "white screen " ,tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

    I have a "white screen",tried to hold the two buttons down and it still won't work.The screen goes dark, then comes back white.

    Morning Clementine Lin,
    For more information this, please see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
    Have a nice day,
    Mario

  • When I click on my Messages app I can see it for a brief moment and then the screen goes blank

    When I click on my Messages app I can see it for a brief moment and then the screen goes blank.  This happened to me last week and I Reset All Settings, which worked-but it has just happened again so that's not a long-term solution.

    Hello linslaf,
    It may help to force close the Messages app, then restart the device.
    iOS: Understanding multitasking
    http://support.apple.com/kb/HT4211
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the issue persists, the next step would be to restore your iiPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

Maybe you are looking for

  • Who can solve my problem? My problem in below.

    Who can solve my problem? My problem in below.

  • BAPI to create Material master record

    Hi All, I need to create a new material master record using a reference Mterial number. Please let me know, if there is any BAPI to achieve this.

  • Extension Manager 6.0.4

         Hi all, update to extension manager 6.0.4 aborts with code U44M1P7. Whats happen? Thanks all Olaf

  • Approval request escalation

    Hi Guys I am looking to fulfill the following requirement: 1. When a request is submitted for access to an application , the request is assigned to the requested user's manager. This is fine. 2. When this is not approved for 2 days send a reminder- S

  • Remote Desktop Client - Do I need to be connected to WiFi?

    I just installed RD Client on my iPh 5s running iOS 8.1.3. I connected to my desktop PC running W7. I notice it works great when I am on the WiFi connection from my network where the PC is located. When I try from LTE or 4G, nothing. Haven't yet had