TV Setup stuck on Downloading TV Setup Data

Windows 7 - 32bit - Media Center Live TV setup.
TV Setup stuck on "Downloading TV Setup Data for your region" trying to download information for my country (Italy).
My TV Tuner is Hauppauge WinTV-NOVA-T-Stick

I have the same issue and have left the media center in this "Downloading TV Setup Data" for over 2 hours and... nothing it just stops its updating process. The little meter never moves any further than its initial 1 dot. This sucks. If the media center in Windows 7 with isnt going to work with a newer Hauppauge WinTV card, then I will never buy it. I will just stay with WinXp & go with the BeyondTV software.
My card is the dual tuner: http://www.hauppauge.com/site/products/prods_hvr_internal.html
and my zipcode is 46350
O/S: Windows 7 Ultimate, and fully updated with all the latest releases
is there a fix for this stoppage or update lockup??
WinTV-HVR-2250 Dual Tuner PCI Express TV tuner
Two analog tuners, each with their own hardware encoders
Two digital TV receivers for ATSC or clear QAM
Watch one analog or digital channel while recording another
Single slot PCI Express (PCIe) X1 board, half height
Dual built-in hardware MPEG-2 encoders, for the best system performance when recording analog cable TV.
Supports clear QAM digital cable TV channels with the new WinTV v6 application
I also thought that it may be because of the WIndows firewall blocking the tranfer, so I shut it down. This is a fairly new install, with no added security or firewall or blocking type softwares added..
I found this setup guide: http://maximumpcguides.com/windows-vista/set-up-your-tv-signal-in-windows-media-center/
and their STEP 7 is where my setup stops... and never goes any further... even If I let it set all night lon and get up the next morning its still in the same place & the computer isnt locked up. I can open browsers, and manuever fine thoughout the system. I have tried 10 time in all sorts of ways and its always the same place where it stop or stalls... Ive checked for updates... nothing... no fix anywhere... any ideas?

Similar Messages

Deletion of setup data : what are the consequences ?

Hello,
I am a sap basis guy, and currently perfroming an Upgrade (4.7-->ECC6).
during the preparation phase, I had some problems with BW estraction data that correspond to the symptoms described
in sap note 1083709; I executed the report RMCEXCHK and deleted the content of the setup data "02" and "11".
This is still harmless , as we are in the QAS system, but I'm concerned about the upcoming upgrade of the production environneemnt.
What are the consequences of deleting the setup tables ?
I'm really confused about what need to be done after the upgrade, regarinf the BW setup tables that have been emptied :
Do you know if :
The setup tables "02" and "11" should be reconstructed ? This should be done when no users are connected?
BW delta loads "02" and "11" will still be operationals ? Or do we need to plan new BW initializations ?
are there any others side effects of deleting the setup tables ?
Thank you in advance for your help.
Regards.

Hello,
Before upgradations all the users will be locked and there wont be any transactions in the surce system....
concerning to delta queues there....All the data have to be extracted before upgradation from delta queues into BW this is important.
Concerning to setup tables....there wont be any problems if you delete, because there wont be any oads going on at this time....
Its always preferable to have some sort of communication with BW guys at upgradation time, make one check list what need to be done before upgradtion and after upgradtion...speak with BI people they will explain their steps...and as a basis guy you can prepare your check lists.
Filling of setup tabless....no need to be done from your side that BI people will do if it is required.
no initializations required after upgradtions.
Regards,
pavan.

In QM view Inspection Setup data tab is not coming

Hi Friends
I want to assign inspection type to a material, plant combination but in QM view Inspection Setup data tab is not coming
Thanks & Regards
Gajendranath

Hi gajendra,
Inspection set up data in QM view will appear only when you select quality view & maintain any plant releted data at the time of material creation .If you dont maintain any plant releted data then QM view then insp set up data will not appear. so please o through mm01 once again select QM view & maintain plant data, then next time insp set up data will appear.

FM for get Material Inspection setup data

Hi ALL
I'm looking for a Function Module or Method that we can get Material Inspection setup data. ( QMAT data )
Please let me know if you know that.
Regards
Rie

reply myself...
I can get an answer below thread
Function Module for get Material Inspection setup data

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

Sql queries for retrieving setups data for functional modules

Hi,
Can anyone give me the sql queries for retrieving setups data for functional modules (GL, AP, AR, FA, and CM) from Database.

Hi,
Can anyone give me the sql queries for retrieving setups data for functional modules (GL, AP, AR, FA, and CM) from Database.

Can we delete --- Deletion of setup Data (LBWG)

Dear all,
During support pack i got error on PROD Open extraction ..
can we delete ---> Deletion of setup Data ( through LBWG) , its advisable ....
Kindly advise

Yes , i have cleared queue are there in R3 PROD without BI functional advise....
its advisable , any issue will come after deleting BI queue ....
Kindly advise
Edited by: satheesh0812 on Jan 18, 2011 8:48 AM

Cannot setup data source that connect to the SQL Azure DB from Power BI

Hi all
I have setup the powerbi site and i manage to install data mgmt gateway on my local machine
then i am able to setup data source on powerbi
however, when i browses the data source table from the powerbi site
i receive the error from get DataSource Schema.
And from the event log
Unable to enumerate tables. Error message: One or more error occurred when accessing the Host Service. Error message: An error occurred while sending the request.
An error occurred while sending the request.
The underlying connection was closed: An unexpected error occurred on a send.
This operation cannot be performed on a completed asynchronous result object..

Hi Hubery
thanks for your advice. But i have installed .Net 4.5.1 and then reboot my machine and restart the gateway
However , I still cannot see table and view schema when i click the following
on the powerbi -> choose the data source -> edit -> data settings
And i receive the alter
Get data source schema - One or more errors occurred in Data Management Gateway. Check Windows Event Log for the gateway errors. Tracing ID: 41582934-e9bf-4ab1-a4c7-53bce895f6f5 - 5:50:11 PM

Function module to create Inspection setup data

Hi all,
Please tell me a function module to create inspection setup data(The tab found in MM01).
Thank you.

HI Sanu,
Check with
QIBP_INSPPOINT_CREATEFROMDATA
QPLEXT_INSPECTION_LOT_CREATE
QPLEXT_INSP_CREATE_REQ_CONF
for more info search wiht QINSPCREATE* in the SE37.
hope it helps you.
Thanks!

How to move Oracle APPS 12 setup data to new APPS 12 production environment

Dear All
I need to know , how we can move Oracle APPS 12 setup data to new APPS 12 production environment?? What is the easy and secure way, we dont want to do the new installation of APPS 12 and re-setup the things....
cheers

Hi,
Can you please explain more regarding to move setup from DEV to PROD instance.The steps are documented in the iSetup manual, so have you gone through the documentation?
Also we would install PROD with multi tier nodes, and HA cluster. So in that case what would be the change to move the setups from DEV to PROD, as DEV is single node TEST APPS 12 installation.iSetup is helpful in moving the functional setup between the two instances. If you want to create an identical copy of your DEV instance to PROD instance (provided that both instances contain no data), then you can use "Rapid Clone" -- See (Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12).
Regards,
Hussein

SkyDrive in Windows 8.1 RTM stuck on downloading files

Hi,
when I make SkyDrive's files offline on Windows 8.1 RTM, the SkyDrive never finishes (it stuck in "Downloading xxx files"). They are kept in this state forever, even after restarts and/or additional uploads.
I have tried this on several computers several times but it always (or almost always) stuck. Number of files differs on each attempt.
I've tried to search for a solution on the net, but have not found anything useful/working (including the App Troubleshooter, or deleting all the files and uploading again), just few notes that for some people a fix on the server side was required.
This issue were present also in the 8.1 Preview era. Applying the RTM Rollup patches did not help.
Would you check the server side for me or suggest how to fix it?

Hi,
Let’s try to redirect the skydrive folder and sync again to see what’s going on:
1. Open regedit and find following key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\SkyDrive
2. Change “UserFolder” to another location.
3. Open the SkyDrive Metro app to confirm your files and new directory.
Then check the issue again.
If the issue persists, please try to reset your Windows 8.1.
Note:Backup your personal data.
How to restore, refresh, or reset your PC
http://windows.microsoft.com/en-in/windows-8/restore-refresh-reset-pc
Best regards,
Karen Hu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Deploying a Task Sequence is stuck at Downloading, 0%

Hi,
I want to deploy a custom task sequence that performs the following Tasks:
Run Program to disable the write filter.
Perform software distribution and software update activities
Run Program to enable the write filter
I did everthing like ist explained here:
System Center Configuration Manager Team Blog
How to Manage Windows Embedded Write Filters Using System Center 2012 Configuration Manager
On the client, in Software Center, the Task Sequence is stuck at "Downloading, 0% complete".
I tried the same with a simple vbs Script which opens a MsgBox, the result is exactly the same...
Which logs can i use to search for errors? What is causing this error?

cscript.exe is running in the taskmgr, but it's no terminated after the the deployment.
smsts.log: (I've deleted D:\_SMSTaskSequence manually...)
==========[ TsProgressUI started in process 624 ]========== TsProgressUI 5/27/2014 2:01:30 PM 2288 (0x08F0)
Registering COM classes TsProgressUI 5/27/2014 2:01:30 PM 2288 (0x08F0)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 5/27/2014 2:01:30 PM 2288 (0x08F0)
Shutdown complete. TsProgressUI 5/27/2014 2:01:30 PM 2288 (0x08F0)
Successfully intialized Logging for TS Manager. TSManager 5/27/2014 2:01:32 PM 3532 (0x0DCC)
Commandline: C:\Windows\CCM\TSManager.exe /service TSManager 5/27/2014 2:01:32 PM 3532 (0x0DCC)
Successfully registered Task Sequencing COM Interface. TSManager 5/27/2014 2:01:32 PM 3532 (0x0DCC)
Executing as a service TSManager 5/27/2014 2:01:32 PM 3532 (0x0DCC)
Started ServiceMain TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Task Sequence Manager executing as service main thread TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Deleting volume ID file D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Waiting for CcmExec service to be fully operational TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
CcmExec service is up and fully operational TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Remediating TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
NAP is not enabled. Skipping quarantine check. (Code: 80040154) TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Remediation returned 00000000 TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
System is not in quarantine. Continuing with task sequence. TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Parsing task sequence . . . TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Task sequence schema version is 3.00 TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Current supported schema version is 3.10 and 3.00 TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Starting Task Sequence Engine . . . TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
**************************************************************************** TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSNextInstructionPointer=0 TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSInstructionTableSize=1 TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable SMSTSRebootRequested= TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable SMSTSRebootDelay= TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable SMSTSRebootMessage= TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable SMSTSRebootReason= TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set a global environment variable SMSTSRetryRequested= TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
The task execution engine started execution TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Set authenticator in transport TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Default CSP Type is 24 TSManager 5/27/2014 2:01:32 PM 3900 (0x0F3C)
Start executing an instruction. Instruction name: Run Command Line. Instruction pointer: 0 TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSCurrentActionName=Run Command Line TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSNextInstructionPointer=0 TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set a local default variable SMSTSDisableWow64Redirection TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set a local default variable _SMSTSRunCommandLineAsUser TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSLogPath=C:\Windows\CCM\Logs\SMSTSLog TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Expand a string: smsswd.exe /run: cmd.exe /c start "" cscript.exe D:\Test.vbs TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Expand a string: TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Start executing the command line: smsswd.exe /run: cmd.exe /c start "" cscript.exe D:\Test.vbs TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
!--------------------------------------------------------------------------------------------! TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Expand a string: WinPEandFullOS TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Executing command line: smsswd.exe /run: cmd.exe /c start "" cscript.exe D:\Test.vbs TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
[ smsswd.exe ] InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
PackageID = '' InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
BaseVar = '', ContinueOnError='' InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
ProgramName = 'cmd.exe /c start "" cscript.exe D:\Test.vbs' InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
SwdAction = '0001' InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
Working dir 'not set' InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
Executing command line: Run command line InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
Process completed with exit code 0 InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
Command line returned 0 InstallSoftware 5/27/2014 2:01:34 PM 3968 (0x0F80)
Process completed with exit code 0 TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
!--------------------------------------------------------------------------------------------! TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Successfully completed the action (Run Command Line) with the exit win32 code 0 TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set authenticator in transport TSManager 5/27/2014 2:01:34 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Clear local default environment TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Updated security on object D:\_SMSTaskSequence. TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSNextInstructionPointer=1 TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Set a TS execution environment variable _SMSTSNextInstructionPointer=1 TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Set a global environment variable _SMSTSInstructionStackString= TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Set a TS execution environment variable _SMSTSInstructionStackString= TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Save the current environment block TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
The task exeuction engine successfully completed the execution TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
Set authenticator in transport TSManager 5/27/2014 2:01:35 PM 3900 (0x0F3C)
**************************************************************************** TSManager 5/27/2014 2:01:36 PM 3900 (0x0F3C)
Execution engine result code: Success (0) TSManager 5/27/2014 2:01:36 PM 3900 (0x0F3C)
Cleaning Up. TSManager 5/27/2014 2:01:36 PM 3900 (0x0F3C)
Removing Authenticator TSManager 5/27/2014 2:01:36 PM 3900 (0x0F3C)
Cleaning up task sequence folder TSManager 5/27/2014 2:01:36 PM 3900 (0x0F3C)
Unable to delete file D:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Failed to delete directory 'D:\_SMSTaskSequence' TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
SetNamedSecurityInfo() failed. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
SetObjectOwner() failed. 0x80070005. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
RemoveFile() failed for D:\_SMSTaskSequence\TSEnv.dat. 0x80070005. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
RemoveDirectoryW failed (0x80070091) for D:\_SMSTaskSequence TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Deleting volume ID file D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Unregister TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
==========[ TsProgressUI started in process 2284 ]========== TsProgressUI 5/27/2014 2:01:37 PM 3952 (0x0F70)
Unregistering COM classes TsProgressUI 5/27/2014 2:01:37 PM 3952 (0x0F70)
Shutdown complete. TsProgressUI 5/27/2014 2:01:37 PM 3952 (0x0F70)
Process completed with exit code 0 TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Successfully unregistered TS Progress UI. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Start to cleanup TS policy TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
End TS policy cleanup TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Task Sequence Manager ServiceMain finished execution. TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Task Sequence Manager service will be reconfigured TSManager 5/27/2014 2:01:37 PM 3900 (0x0F3C)
Task Sequence Manager service reconfigured successfully TSManager 5/27/2014 2:01:39 PM 3900 (0x0F3C)
Sending success status message TSManager 5/27/2014 2:01:39 PM 3900 (0x0F3C)
Set authenticator in transport TSManager 5/27/2014 2:01:39 PM 3900 (0x0F3C)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 5/27/2014 2:01:40 PM 3900 (0x0F3C)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 5/27/2014 2:01:40 PM 3900 (0x0F3C)
End program: TSManager 5/27/2014 2:01:40 PM 3900 (0x0F3C)
Successfully finalized logs to SMS client log directory from C:\Windows\CCM\Logs TSManager 5/27/2014 2:01:40 PM 3900 (0x0F3C)

Problem with initial download of a data object

Dear All,
I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCATION.
I have selected the following as the BE Keys in the nodes.
SERIAL NO in EQUIPMENT header node.
TYPE in DETAILS node.
ZIPCODE in LOCATION node.
In the explicit key mapping of DETAILS node we have selected "SERIAL NO" field in this node.
In the explicit key mapping of LOCATION node we have selected "SERIAL NO" and "TYPE" fields in this node.
Data object contains no errors and i have activated the data object and it was successful.
Then i have also created back adapter which has EQUIPMENT get list and get detail. Get list returns only serial numbers (which is the BE key in EQUIPMENT node). Get detail takes "serail no" as input, returns "DETAILS" and "LOCATION" data in tables parameter. I have tested the get list and get detail interfaces, they are working fine. Then i have activated back end adapter and that was successful.
Now i have triggered an initial download for the "EQUIPMENT" data object, but there is no data downloaded into the data object. I have checked the monitoring in administration portal, it is showing status "Ended with errors", but there is no details of an error.
So can you please let me know what could be mistake i have done or how to check what is the error. Please help us to resolve the issue.
Regards,
Kiran.

Hi Kiran
Are you checking in the NWMA>>Monitoring>>Logs and Traces>>Backend Integration? The logs should have the proper error.
If not can you regenerate the DO, edit and activate your adapter and try again?
Regards
Rohith

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

TV Setup stuck on Downloading TV Setup Data

Similar Messages

Maybe you are looking for