TV Shows Won't Display

Hi, I just bought the season pass of Supernatural from the iTunes site. The episodes work fine on my computer, but they come up in "podcast" form on my 30GB iPod Video. I've already tried to change my widescreen settings, and nothing seems to work. Help, please!
Gateway Windows XP

TV shows were showing with Artist field blank before I updated to 4.3.1. Thank you for the comment though.
This problem was just solved. I unchecked "sync TV shows" on iTunes devices menu, then re-checked it and transfered TV shows back, and it finally showed up without the app crashing. I did this earlier and didn't work but this time it finally did. I can start watching TV shows again!

Similar Messages

Tv show won't display or play in iPhone 6 Video player

I have an iPhone 6, kept up to date with the latest version and backed up every day. I purchase a subscription to The Soup TV show through iTunes but I can't get the latest, downloaded episode to display in the standard iPhone Video player (or any of the video player apps I've tried downloading). I have tried downloading it from the "Get More Episodes" link on my iPhone, by clicking on the link to the episode in the email alert, and downloading it on my Macbook Pro then dragging and dropping it over to my iPhone. I cannot get it to show up! And old episodes I've deleted will not stop displaying, even if I delete them on my iPhone or manually delete them using iTunes. They used to stop displaying if I managed them in iTunes but upgrades .
Is it just this TV show or is there something I'm just not doing? Thanks!
Laura

YamiPod is third party software for retrieving files from your iPod and copying them to iTunes. You can check out the web page for documentation. It's normally used on a fully functioning iPod where there's been a loss of iTunes due to a crash for instance. It may or may not work in your case but you'll find it at this link: YamiPod

Won't display table correctly; shows OK in IE all versions

Table won't display correctly in Firefox; deletes first <tr>...</tr> section, shifts 2nd <tr>...</tr> section to right. The table shows correctly in all IE versions.

You should never use multiple hyphens in a comment.
Firefox will toggle the comment state after every two hyphens (--), so you need a lot of luck with this many as here:
<pre><nowiki>
</nowiki></pre>
Firefox treats the code that follows as comment until the next two "--" found in the next section. You can see that via View > Page Source as green comment.
<pre><nowiki>
</nowiki></pre>
You're code shows here an extra empty <nowiki><td></nowiki> that causes an empty column to appear at the left if that is what you mean.
<pre><nowiki>
<TR align="center">
<td>
<td>
<Font color="#ff00cc">
<h2>Charleston</h2></font></td>
<td>
<Font color="#ff00cc">
<h2>Savannah</h2></font></td>
<td>
<Font color="#ff00cc">
<h2>Recommendation</H2></font>
</TD>
</TR>
<td></nowiki></pre>
You can use the DOM Inspector to check out the code.
*DOM Inspector: https://addons.mozilla.org/firefox/addon/6622

Project/Albums show as having pictures, but won't display the pictures.

I have a Project and it has two albums listed (indented) underneath it.
I have moved them around a bit to put them in different folders, and now the pictures won't display. By that I mean that if I mouse over the project, a popup (or flyover) says there are 129 versions, but no pictures show up in the browser window. Same thing for the album.
The files are referenced files and the files are still in the folder in the same location on my hard drive so I could delete and then re-import, but I'd lose my keywording, any other metadata tags (ratings), and my adjustments. I really don't want to lose those.
Any ideas?

Sometimes moving projects around can create invisible filters, check Frank Caggiano's User Tip: Images not appearing in browser, search filter is cleared
But your long loading time is suspicious: Have you imported any new images recently? Long loading times can be caused by a corrupted image or video in your library; then you need to identify the broken image and remove it.
Also can long loading result from a corrupted Aperture Library that needs fixing. DId you have a recent Aperture crash?
Have you already tried to repair or rebuild your Aperture Library? See:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Regards
Léonie

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. HELP!

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. Once it displayed but the presentation mode was on the big screen and the presentation I wanted to show was on my MBP screen. I have the adapter( white ones) to attached to the projector cables. I am so frsutrated...it looks so silly not to have a computer work during a presentation..
Another problem one the rare occasion that it shows on the screen is that the presentation does show just my desk top. Any ideas?
Thanks !

You often have to turn off Mirroring to be able to set the second "screen"s resolution to something reasonable. When you do, the two screens become an "Exceeded Desktop" joined along one edge, and the Arrange pane in displays prefs can allow you to specify what edge. Initially, it will show a vacant extension of the built-in screen's desktop.
The mouse moves freely across that shared edge, and can allow you to drag the presentation window across to the the projector screen and re-size it to fit.

Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Over half my albums in iPhoto won't display the enlarged photo. How can I correct this?

Over half my albums in iPhoto won't display the enlarged photo. How can I correct this?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Image with foreign characters in name won't display

I have an image on my drive whose name has foreign characters ("c�pia de frente.jpg"). To display the image my JSP reads the image name from the database and generates the following html:
<img src="../pictures/c�pia de frente.jpg">The page then displays a broken image icon for this image. Images in the same list which do not have foreign chars get displayed accurately. When I choose "show image.." in my browser I see that the image name has been rewritten into the following: c%C3%B3pia%20de%20frente.jpg. The rewriting that will display the image is instead c%F3pia%20de%20frente.jpg. I found the correct rewriting on another of my JSP where the image with the foreign chars actually gets displayed correctly although the code to generate the html is the same on both pages and looks something like this (simplified):
<logic:iterate id="listelement" name="list" property="rows" scope="request" type="org.apache.commons.beanutils.DynaBean">
<%
out.write("<img src=\"../pictures/"+listelement.get("name").toString()+"\">");
                         %> <br>
                        </logic:iterate> Every image that doesn't have foreign chars in its name gets displayed accurately but images with foreign chars in their names won't display. What am I doing wrong?
Thanks
Niklas

Thanks, but it doesn't seem necessary to replace foreign characters. It works without replacing in one place but not in another which is confusing. I think it is something with the enconding but can't see what the difference is between the working and non-working code. In both pages I have put <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">I'd greatly appreciate any more suggestions to solve this problem.

PDF files won't display. Error message "Missing Plug-ins"

Hello. I am having trouble with adobe reader but only certain files. When I first signed up for school in may Adobe Flash Player and Adobe Reader were required and when I did the check plug-ins system check, both were installed and running just fine. Just in the past 2 days is the check plug-ins test saying Adobe reader is not installed. I have tried un-installing and re-installing but still saying it is not installed. I'm not having troubl with all adobe reader files. I'm an online student and my e-books are opening and displaying just fine. Also my pdf documents saved on my computer are opening just fine. When I try to view a websites brochure, a websites sale paper, or maybe open up an article, the page pops up but the image won't display. It keeps saying "missing Plug-ins". I have a MAC 10.6.8. running on Safari and I have downloaded Adobe Reader 10.1.0. I need to be able to open up articles because I'm doing a homework assignment that requires one. If u can help in any way, please do.

I've tried all the fixes listed in the discussions about missing plug-ins in Mail. None of them worked. I can see attachements in the emails, but when I forward them, the missing plug-in shows up in place of the attachments on the forwarded email. I'm running the latest OS 10.7 on my Mac Pro and I just downloaded the latest Java app. HELP!!

Preferences window won't display along with other windows.

I am trying to edit my preferences. It only displays a little hint of a window with an X to close it. The same thing for reporting a bug. Basically I have not been able to get one popup application window to display.
I am on Vista Ultimate x64 with dual monitors running in 2650x1600 resolution.
Basically I can't even report the problem as a bug since that feature won't display the window either. Hopefully Apple is monitoring this board.

The same thing is happening to me in XP. I couldn't even log on to this site as a window (probably asking to save my password) is popping up but all it shows is a small title bar with an X. No preferences, can't report bugs or even customize the toolbar.

DW8: image won't display in Design View

Folks:
DW8 on MacOS 10.4.8 (fully updated) on Intel iMac.
What would keep an image from displaying in DW Design View?
What are the causes of the grey box with the superimposed "X"? Is
there any diagnostic output that might help? Is the grey box and
"X" substituted by DW8 for an invalid or un-drawable graphic, or is
this done by the OS?
The problem:
I've got a 1912 x 1481 graphic, a geographic map, in AI that
I'm trying to use as an ordinary web image, but DW won't display it
in Design View. Instead all I see is a big grey box and "X". For
test purposes, I'm starting from a new "Basic" HTML web page and
all I'm doing is inserting this one image. I need to get this
working so I can draw hotspots on this graphic to make it
"clickable" .
Here's what I've tried:
o Triple-checking that the inserted image reference is
correct. Yes, the image file is correctly linked. With the image
selected, the inspector shows a tiny but recognizable miniature of
the expected image. Further, when the page and the image are
uploaded to the web server and I look at it via a browser, the
expected image is _always correctly displayed.
o Exporting the graphic "for the web" from AI as both a GIF
and a medium-quality JPG. Neither of these are displayed in Design
View; both are served up correctly after being uploaded
o I found a larger JPG on a different site I'm managing. This
always displays as expected in both DW Design View and when served
up. I substituted the failing map JPG image. The result: A grey
box.
o Checking the map images: The JPG and GIF versions seem to
be visible in all environments (image readers, browsers, etc.) I've
checked _except_ DW8 Design View.
o Checked on another system. I made the failing image
available to a very helpful ACE, who performed a similar
experiment. It worked fine for him. I used his exact HTML and
directory structure -- and it failed for me. Grey box with "X".
It seems to me that I've checked most of the obvious
possibilities. Now it is time to check the less obvious ones.
Suggestions are very welcome!
Thanks,
Henry

Randy:
Thanks for your response.
This is a virtual memory system, so -- in theory-- it should
accommodate anything that will fit on the hard drive, more or less,
if I'm wiling to wait the hours (days?) it will take to swap on and
off the disk. That assumes DW8 takes advantage of the capability.
It may not.
"Larger"? The JPG image I compared to is 1692 x 2160 pixels,
but weighs slightly less, 289K bytes. I'm losing track of all my
test images that fail, but a representative one is 1912 x 1481
pixels and weighs 332Kb on the disk. "Roughly comparable" might be
a better description. The point is still reasonable: DW8 does
handle images of this size on my system.
One issue that occurred to me recently is that I may have
caused some grief by monkeying with the "Save for web" settings at
the Illy export. Perhaps I asked for some configuration that's
normal for Illy to export --or it would have warned me, I hope--
but too strange for DW to grok. DW should complain more
informatively than painting a gray box and "X" when that happens, I
would think.
Henry

Messages won't display images, sandbox violation?

Can anyone help me figure out why, when I receive an iMessage that contains a photo or other image, Messages on Yosemite won't display the image? It appears to be a sandbox permissions issue, but I can't figure out how to resolve it.
Briefly, when I receive an iMessage that contains any image, the image displays just fine on my iOS devices, but in OS X Yosemite (10.10.1, build 14B25), it just shows up as a generic icon (attached at the bottom of this question). Clicking the icon or magnifying glass doesn't load it, double-clicking it doesn't load it, Quick View won't show it... nothing. If I look in /var/logs/system.log, any attempt to view it generates sandbox-related errors:
Messages[30820]: [Warning] Transfer: unable to create image for IMG_2758.JPG.jpeg
kernel[0]: Sandbox: Messages(30820) deny file-read-data /private/var/folders/7l/cn4n4k4n4p31ncqq9qqk1klrydkmkm/T/IMG_2758.JPG.jpeg
If I manually open up that directory (/private/var/folders/7l/cn4n4k4n4p31ncqq9qqk1klrydkmkm/T/) I can see the image and open it myself, but Messages can't do it... and I can't for the life of me figure out how Messages's sandbox is configured and what is going on here.
This all happened when I upgraded to Yosemite; prior to Yosemite, everything worked fine. I've tried to blow away /private/var/folders/7l/ and let it get rebuilt, to no avail. I've also hunted for Messages's sandbox config file, to no avail.
Help?
Thanks in advance!
Jason

Hi,
That does seem odd.
I mentioned the Containers things as this is the Read and Write route that the app uses (normally to the aliases in the /Data/Library/Preferences that pints to ~/library/Preferences)
I also looked in those places but for IDS, SOAgent and IMAgent that are also involved but no luck.
On your Console Location for the Var Stuff I have this
See Path Bar across bottom. This pic of Dec 1st I had to open in Preview.
A Different view if it helps
I am not sure what to suggest at this point.
8:28 pm Tuesday; December 9, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

My iTunes won't display the artwork

My iTunes on a jukebox setting won't display the artwork. It currently has an error message of "iTunes is unable to browse album covers on this computer".
It was working fine the other day. I have updated it version when I received the error message but still nothing.
However when i select the middle view option, it shows the artwork.
Please help. The black screen is annoying!

....it's my cover flow view that is not working!!!!!!

IPhoto library won't display, "Loading Photos" endlessly

Iphoto won't display the library, it shows the loading photos graphic endlessly. Tried deleting all relevant metadata (files in iphoto library folder and library>preferences) and repairing disk permissions, to no effect. Did not move or rename iphoto.app.
Please suggest fikes for this issue and/or alternatives to iphoto.

Welcome to the Apple Discussions.
Tried deleting all relevant metadata (files in iphoto library folder and library>preferences)
What files did you delete in the iPhoto Library Folder, exactly?
Did not move or rename iphoto.app.
Good to know, but the warning about moving/renaming does not refer to iPhoto.app but to the library:
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

MacBook Air connected to projector won't display dvd in superdrive, but plays on macBook Air screen.

MacBook Air connected to projector won't display the dvd in the superdrive, but it is playing on the MacBook Air screen.
When dvd is ejected, MB A screen appears on the big screen through the projector. What do I need to do to get the training dvd showing on the screen?
Thanks

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Uncheck “Auto Proxy Discovery”.
Click OK, Apply.

TV Shows Won't Display

Similar Messages

Maybe you are looking for