TV STATIC WITH SOUND EFFECT

I have Adobe Premiere Elements 4.0 and I want to end a video with the effect of it looking like it goes to a TV screen of static with that sound.  Is there any possible way to do that???

My first thought would be to tape an analog TV tuned to a channel with no signal. Otherwise, you could probably pull the Ant. connection and tape that.
For the Audio, if you do not get what you want (I'd use the Audio Out on the TV to the Audio In on the camera), you might look for on-line SFX sites. Here are a few:
http://www.stevengotz.com/audio.htm
http://www.findsounds.com/ISAPI/search.dll
http://www.freesound.org/index.php
http://www.a1freesoundeffects.com/
http://www.ljudo.com/default.asp?lang=tEnglish&do=it
http://www.sounddogs.com/
http://www.soundsnap.com/
I'm also sure that there would be stock footage of the "static" on video, but think that your video camera would get exactly what you want, including the bezel, if needed.
Good luck,
Hunt

Similar Messages

  • Issue with sound effects preference output (no sound)

    HI,
    Weird issue, my macbook will play any music or sound except sound effects like moving items to the trash or when something is done copying to my external drive.
    I checked the sound preferences and everything seems right.
    My Sound Effects panel works and shows the list of sounds.
    "Play alerts and sound effects through:" is there but that list is greyed out (maybe because only one option?). It does say internal speakers
    My Output is through the internal speakers and works fine.
    I thought the problem might have been an external pair of speakers I had used. I hooked them up and selected the internal speakers from the menu and then disconnected the speakers but still silence.
    I like the audio feedback especially with multitasking. Since all other audio plays fine it's not the internal speaker.
    Any ideas?
    Thanks,
    Phillyman
    A typo in the title Message was edited by: Phillyman

    HI Carolyn,
    Thanks for your reply! The weird thing is that this is a brand new system (about a month old). On my other systems I do have some audio software but I've hardly touched this system. I'm pretty sure it once did give me audio feedback. All the boxes are checked in the sound effects panel (including the play user interface sound effects).
    My other systems all have external speakers and I've been too lazy to crawl under the tables and disconnect them. But here my followup. If you have nothing connected is the sound effects through menu: greyed out if you only have one source? In my case it is and I think that has something to do with my problem.
    thanks for any and all help,
    Phillyman
    posted the message while still in the middle of it. Message was edited by: Phillyman

  • Why does my new garageband 10.0.03 not have the legacy with sound effects or radio sound preset or applause preset???? I need these to be able to chop samples into the keyboard keys by dragging and dropping them into the keys.

    I am just trying to chop samples and drop them into a track with legacy-sound effects- radio sounds, so that I can play with them and chop them onto keys. I see a bunch of videos on youtube showing you how to do it, but I can't find those kits on the newest garageband.

    All these effects are part of the loops in the iLife Sound effects loop package, that was a part of the application bundle iLIfe '11 (iPhoto. iMovie, GarageBand '11).  These loops are neither installed by GarageBand 10.0 or GarageBand '11, nor MacOs X, you need an iLife '11 installer disk to get these loops.
    And GarageBand 10 also does not have the Sound Effects instruments any longer, that let you drag samples onto keys. It is one of the sorely missed features, that have been discontinued in the new version GarageBand 10. even if you install the previous version, GarageBAnd '11, to add the Sound effects instrument to GarageBand 10. it will not work properly, because GarageBand 10 will not save the custom instrument with the samples. You will have to complete your song in one session, without quitting GarageBand.
    You may want to send feedback to the Apple Developers about these missing features with a feature request:   Apple - GarageBand Mac- Feedback

  • Firefox opens with sound effects which are unwanted

    When I open firefox, sound effects start and continue until I shut it down

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Try to clear the cache:
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    You can also try to delete the files sessionstore.js and possible sessionstore-##.js with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * http://kb.mozillazine.org/Session_Restore
    * http://kb.mozillazine.org/sessionstore.js

  • Flash swf file import with sound effect

    I'm sorry for my english
    when ı import any swf file that include sound effect and run the project. Swf files running perfect but swf files are quiet...
    how can ı solve this

    We have configured our BW sytem to extract data from CRM. Various reports are displayed in CRM UI  including queries using BEx WEb and Xcelsius dashboards. Xcelsius dashboards is pulling data from BW cube for CRM data. To present the dashboard in CRM UI we created a bEX web template as a copy of 0DASHBOARD_TEMPLATE. In the copied template specify the name of the xcelsius file. The copied web template can be configured using standard config options for CRM UI.

  • No audio in Muse when I import an Edge file with sound

    I'm using an Edge animation with sound effects in Muse.
    In Edge all audio is playing but when I import the .oam in Muse there is no audio.
    Any Suggestions?
    Thanks!

    Problem solved, local sounds don't work for muse. Moving the sounds folder an external url did the trick..

  • I can't find a appropriate sound Effect for motion template.

    Hi,
    Like my title say I can't find a appropriate sound Effect for motion template. I am using the template that goes by SATIN and There I choose SATIN BLUE-MENU.
    In that Template we can see a blue Sheet flying by. BUt I am totally lost to get a nice sound for that. So far I could not find any sound for that. I never Worked with sound Effect. I appreciate any tip.
    What is better only sound or a music playing with it? What kind sound goes with it?
    Hope to hear from you all.
    Thanks

    I think you need to give us a little more information. Which program are you currently using? Soundtrack Pro, Motion, what? What does the Satin template do?
    It sounds like what you're looking for is a "whoosh" effect -- like maybe a gust of wind or something like that. In finder search for the word "whoosh" and then select whichever drive has your Apple loops. You'll find a plethora of whooshes.
    Of course that may not be what you're looking for. You'll have be be a little more specific with what the picture is that you're trying to add sounds to, and even then, it's still your artistic choice.

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Hello, Miryam Maria. 
    Thank you for visiting Apple Support Communities. 
    I see you are experiencing issues with sound on applications when playing video/audio content.  If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute.  Below I have included an article that covers adjusting the  settings for the side switch.  Also, make sure to close all applications in Multitasking and power cycle the device.  Test the sound issue after processing these steps.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Cheers,
    Jason H.

  • Sound Effects with Adobe Premiere Elements

    I am looking to buy a video editing package
    Have downloaded the trial version which appears fairly easy to use
    I can't find any sound effects? Some other video editing packages come with a whole range of sound effects
    Have I missed them? Do they exist?
    Many thanks
    Paul

    SoundDogs is good, as is Muvipix. They each are in my list of sources for SFX and music:
    http://www.stevengotz.com/audio.htm
    http://www.findsounds.com/ISAPI/search.dll
    http://www.freesound.org/index.php
    http://www.a1freesoundeffects.com/
    http://www.ljudo.com/default.asp?lang=tEnglish&do=it
    http://www.sounddogs.com/
    http://www.soundsnap.com/
    http://www.stock20.com/commerce/index.php
    http://www.shockwave-sound.com/index.html
    http://www.smartsound.com
    http://www.ilovewavs.com/Effects/Music/Music.htm
    http://www.jamendo.com/en/albums
    http://www.5alarmmusic.com/
    http://www.studiocutz.com/
    http://www.partnersinrhyme.com/
    http://www.newgrounds.com/audio/
    http://www.soundclick.com/bands/default.cfm?bandID=180598
    http://www.soundrangers.com/
    http://www.muvipix.com
    Good luck,
    Hunt

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • HT201808 "...nor may they be repackaged in whole or in part as audio samples, sound effects or music beds." So does this mean I can't make a song with just remixed loops and publish it on SoundCloud for example?

    If I've made a song with remixed loops, can I post it on SoundCloud to share with facebook friends and stuff? Regarding this statement from the software license agreement: "...however, individual audio loops may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound effects or music beds."

    momomikes,
    Would you mind continue reading the document you quoted?
    Read the last sentence, please. It goes:
    ”So don't worry, you can make commercial music with GarageBand, you just can't distribute the loops as loops.“
    https://support.apple.com/en-us/HT201808
    P

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Is it permissible to upload a video on youtube with music, sounds effects, and video effects from imovie?

    Lately, I've been editing and making videos for a local church in Mexico. I am not selling any of the videos. The are free to watch. However, is it permissible to upload a video with music, sound effects, and video effects from imovie? I using imovie version 10.0.2

    This question comes up from time to time.
    There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
    “You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
    http://images.apple.com/legal/sla/docs/ilife09.pdf
    You should quote this (also providing the above link) when following any dispute process with YouTube.

Maybe you are looking for