TV Tuner Audio failure followed by color distortion (a Total Mess)

Hi guys
so this is my story
I've this MSI FX 5200 VT128 Personal Cinema for about 8 months and it's been working fine . After upgrading my Mother Board to GA-8IK100(v2.0) and my CPU to Intel P4 3.0 GHz HT again the CARD WAS WORKING FINE ( the problem i'll explain has nothing to do with system config, coz it's been working).
One day i came up with the idea, HOW NICE WOULD IT BE IF I COULD USE THE AUX-AUDIO-IN CONNECTOR OF THIS CARD TO CONNECT IT TO AUX-OUT OF MY OnBOARD SOUNDCARD , although i couldn't find any instructions about this connector (White 4-pined coonector on this card) , i couraged to plug a proper cable between two(i'm an electronics Engineering Student :hypecrite: and i couldn't see any NO NO in it), and the problem began here!
First of all, i couldn't hear any thing in this new config, so i removed the cable and used the LINE-IN cable as i did before, but no dice ! No sound !
I though something has went wrong onboard.
When i tried to do the same thing again (AUX theory!) to make sure it was not working ( after a second boot ), and it didn't as expected, a new problem came up!
After changing things back to noram, While having no Audio the pictures i saw was great! No RED color , and a DRAMATIC distortion in what i can say was color!
Although think i've damaged the tuner badly ( electric shocks after restarts) ,
I want to know if there is any way around to bring this bad boy back to work?
Can anyone help me?
(I can perfome Technical Fixings (replacing any component , or circuits if possible) )
Thankx for your patience after all(if u ever happen to get to this line )

So the right way is that:
check first visual for problems like burned cap resistors and then measured all diode around output connection somethimes for ESD protection company used shotky diode which are not work well with big current like your case.
Then if this is the reason remove all of them and asembly new
if the problems are coming from CPU on the card
forgot this card and bay new one !!!!
I hope this information you will got also from thechnical support staff :-)
So sorry this card like a bad hardware design release .................
a lot of bugs inside software and now hardware problems .... ????
Any way try to find what are the electrical problems ..

Similar Messages

Screen is grainy and colors distorted.

Hi everyone,
Currently, my Macbook Pro (early 2011) is experiencing graphic display issues. My screen's is grainy and somewhat pixelated, which makes the color distorted. I resolved this problem once after closing and opening my lid (sleeping and turning it back on), but now that does not help anymore. I also noticed that, in the past, when I restarted or shut-down my computer, it would have random color distortions on the blue screen as well. When I try to take a screenshot of this problem and open the picture on another computer, the picture appears fine, so i'm assuming its an issue with my screen.Also, when I turn on "Automatic graphics switching," my System Profiler information still indicates that my AMD RAdeon HD 6750 is running.
How can I fix this problem? Thank you!

System Preferences/Display/Display
Check the Colors & Brightness settings.
My Color setting is set to Millions which I believe is the default setting.
Now click on the Color button.
Check Display Profile
Is Show profiles for this display only enabled or disabled?
If necessary click on the Calibrate button & do the necessary.
Now in the bottom right corner, click on the purple button w/the black *?* mark in the middle. This will bring up the help window.
Midway down, click on the Colorsync Utility link.
The next window should be Profile First Aid.
Read & follow the instructions/details of About Profile First Aid: & do the necessary to Verify & Repair.

My tx is so slow, the web cam is not working, the screen freezes and got color distortions

- My tx is so slow, and heats up very fast... so i think that the advance is not working properly
- the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
- The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
that is why I seek your help...
i will be grateful if you answer in Spanish because my English is not very good...
thankyou so much...

If your warranty has not yet run out get it serviced, now! All of the comments seem to indicate that it is the motherboard>

Audio monitoring follows video to Firewire Output

I'm a new FCS/Soundtrack Pro user but have been using ProTools LE and HD for some time.
When I select Video Out Firewire to view my video on an external monitor my audio monitoring follows and feeds the firewire device instead of my internal Mac outputs or my DIGI-002R.
I only want to view the vision on the monitor and keep my audio outputs playing through the DIGI002R. Is there any way of achieving this or am I missing something in the setup?

DV-Video to DVI Converter

Could I follow the color correction in final cut studio with an imac with 128mg vram?

Hello:
Could I follow the color correction in final cut studio lessons(peachpit book) with an imac with 128mg vram? or I need a powerfull card.
Thanks s lot.

Yes, you can do the lessons.

Color Distortion in Safari 4.0.3

I scroll up and down and slowly bands of color start appearing. They almost look like highlights, but they get darker and darker.
Apparently, this isn't the first time anyone has had the problem, but the first complaint was archived unanswered.
+*Strange color distortion in Safari 4*+
+"Ever since updating to Safari 4 (and 4.0.1) I am getting strange color distortions when only in safari. If I scroll up and down it makes it worse."+
Here is a screenshot example (not mine)
http://i296.photobucket.com/albums/mm196/DrewsDesigns/babyjack-1.jpg
Message was edited by: Jamal Morelli

HI,
Run the Apple Hardware Test to make sure it isn't the graphics card.
http://www.thexlab.com/faqs/aht.html
Also, go to the Apple Menu / Software Updates. Make sure your system software is up to date.
Carolyn

Transparency Color Distortion When Printing

I have designed something in InDesign and included in the template is a transparency that I created in Photoshop. It looks fine on the screen, but when I print the area that is transparent has color distortion. I have a host-based laser printer. Is there anything I can do to correct this using my current setup? Is this where I would somehow make use of the transparency flattener presets? If so, how exactly does that work?

Without seeing the distortion I'm only guessing, but it sounds like it may be YDB. See InDesignSecrets » Blog Archive » Eliminating YDB (Yucky Discolored Box) Syndrome

Color Distorted Screen Freeze

Have you ever seen a crash/freeze like this? The screen goes completely bonkers, with a very pixelated color distortion, and is unresponsive. One time I tapped the trackpad, and it flickered back to normal appearance, but remained frozen. It's a 15" macbook pro, last generation model with all of the latest OS updates. Any suggestions, warnings, and feedback is appreciated. Thank you.

Have you tried latest VGA drivers from Nvidia? ==> http://www.nvidia.com/Download/index.aspx?lang=en-us
Does the issue happend in other games too?
Have you tested VGA in another machine?

ProRes 422 LT color distortion in playback on pc

Hi,
I'm trying to send prores LT files to a client so that they are viewable on a pc using quicktime. The files need to be edited further down the line, but I am not sure what operating system will be used at that time. After reading that ProRes could be viewed and edited on Mac as well as some PC editing software I downloaded the prores quicktime decoder.
This is the color distortion that results when viewing the ProRes 422 LT footage using QuickTime Player on a PC (XP SP2):
<a href="http://s1084.photobucket.com/albums/j406/nazdorovje/?action=view&current=Screens hot2012-06-11at160953.png" target="_blank"><img src="http://i1084.photobucket.com/albums/j406/nazdorovje/Screenshot2012-06-11at160953 .png" border="0" alt="Photobucket"></a>
<a href="http://s1084.photobucket.com/albums/j406/nazdorovje/?action=view&current=Screens hot2012-06-11at160911.png" target="_blank"><img src="http://i1084.photobucket.com/albums/j406/nazdorovje/Screenshot2012-06-11at160911 .png" border="0" alt="Photobucket"></a>
Is this a problem with the codec decoder installed on the pc? Any advice would be greatly appreciated.

this is a known problem; try changing this setting:
QT > Edit > Preferences > Quicktime > advanced tab > video > select safe mode GDI

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Color the sub-total row in an alv-grid

Hi all.
I work on SAP 4.7 WAS6.20 and output a table with the cl_gui_alv_grid. I´m able to color special rows (or columns) in the alv grid. But I want to color individually the sub-total lines (like the lines before) and don´t want the yellow color for all of the sub-total lines.
Do you know how to color the sub-total-lines?
Thanks a lot.
Michael

Hi,
U can color an individula row see the link below
Color a line
The steps for coloring a line i the grid is much the same as making a traffic light.
* To color a line the structure of the table must include a Char 4 field for color properties
TYPES: BEGIN OF st_sflight.
        INCLUDE STRUCTURE zsflight.
*       Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
* Loop trough the table to set the color properties of each line. The color properties field is
* Char 4 and the characters is set as follows:
* Char 1 = C = This is a color property
* Char 2 = 6 = Color code (1 - 7)
* Char 3 = Intensified on/of = 1 = on
* Char 4 = Inverse display = 0 = of
     LOOP AT gi_sflight INTO g_wa_sflight.
      IF g_wa_sflight-paymentsum < 100000.
        g_wa_sflight-line_color    = 'C610'.
      ENDIF.
      MODIFY gi_sflight FROM g_wa_sflight.
    ENDLOOP.
* Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
* Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                             is_layout                = gs_layout
      CHANGING it_outtab                 = gi_sflight
see the link
http://www.sapgenie.com/abap/controls/alvgrid.htm

Jeez itunes i finally got my episode three of "top of the lake" and THE AUDIO IS TOTALLY MESSED UP. what gives? tryin g to watch the season i paid $20.00 for is exhausting, a total hassle,

Jeez itunes i finally got my episode three of "top of the lake" and THE AUDIO IS TOTALLY MESSED UP. what gives? trying to watch the season i paid $20.00 for is exhausting, a total hassle, and just come on, get it right, would you? what is up with the audio? fix it.

I've seen multiple complaints of this. I'm sure the publisher will eventually replace it, but you can report it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

No audio with video Premiere 11, distorted work area

I downloaded Premiere 11 onto my Macbook Pro. I have 2 issues, I have no audio on videos or with narration. Mp3's play fine. When I bring media into the work space, every thing is distorted and I can't see where I am dropping it or what I am doing with it. We have Premiere 11 on my husbands Mac and it works fine. Any help would be appreciated.

nursesharonhaz
Thanks for the details. Moving forward...assuming that all new projects behave the same with regard to your problem media in your Premiere Elements 11 Mac.
1. Narration. Please create a .wav narration clip in the free audio editor named Audacity and import them into Premiere Elements 11 Mac with the project's Add Media/Files and Folder/Project Assets from where you drag it to the Timeline Narration Track.
2. MOV File. What is the brand/model/settings for the camera that recorded that video?
Double check to assure that you have the latest version of QuickTime installed on your computer with Premiere Elements 11 Mac.
How does the editing workspace distorts weirdly when the .mov file is dragged from Project Assets to Video Track 1 of the Timeline?
Do MaxBook Pro have themes as does Windows (Aero, Basic, and High Contrast)?
3. Miscellaenous. Delete the Adobe Premiere Elements Prefs file in the 12.0 Folder
Users\Libraries\............\Adobe\Premiere Elements\12.0
For Mac, I am not sure if the ......is Preferences or Application Support
I am wondering about your Intel Iris video card/graphics card. Need to find out if there is any history on that with Premiere Elements.
If none of the above presents as contributing to the core issue, then let us try downloading a new source of installation files. Please do so from
the following web site. We will be using installation files for Premiere Elements 11 tryout into which you can insert your purchased serial number.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
You can also look at the Premiere Elements 12 tryout to determine if there is any difference in behavior between 11 and 12.
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Let us see if any of the above has any impact on your situation.
Thanks.
ATR

A minor helpful tip - Convertion of TV Tuner audio output from on-board sc to SB Live! 24 bit

Hi guys,
Many of you might had known about it but I just would like to share my tiny knowledge here with those who might has the same problem when they upgrade their on-board sc to SB Li've! 24 bit sc.
If you have a on-borad sound card, and if you decided to but a new SB Li've! 24 bit sc and then you might find that all audio are OK after installing the SB Li've! 24 bit sc except sound/audio from your TV tuner !!! . . the TV sound is MUTED!
Firstly, there is this tiny Audio Cable connected from your TV tuner card to a 4-pin input-jumper somewhere on the motherborad (since it's a on-borad sc, you might not find it on the on-board sc or next to it). Please note that my on-board sc is refering to my On-board Realtek AC97 Audio sc as for my case. You might have a different on-borad sc, but generally the setup is more or less the same.
After installing your SB Li've! 24 bit sc, make sure you re-direct this tiny Audio Cable from TV tuner card to the 4-pin Audio input jumper of you SB Li've! 24 bit sc.
Then, go to your WindowsXp Sound control property, UN-MUTE the Auxiliary.
Then, go to your TV software program to configure the AUDIO SOURCE to Auxiliary.
Tada . . you got the sound/audio from TV. Now. . you can surf the net or do your work while enjoy your TV program at the top of the screen!!
I hope this help!

Latest....
After reinserting the ATI card, I was not able to test before driver installation due to low resolution video.
I tested after installing the latest ATI driver and still had zero SCP issues.
I then uninstalled the original driver from the SB Li've CD and reinstalled the latest driver from filename SB24_WEB64_LB__04_0055
SCP is BACK!
This DOES seem to indicate a major change in the Creative drivers from original issue to current issue that are not in spec.
My SB Li've model # is SB040.
The information from the p7.inf file on my CD is as follows.....
; Apache INF file
; Models : SB030, SB032, SB0399, SB037, SB043, SB040
; Feature : Enhanced (WDM)
; Language : English
; Date : 04 Jun 2004
; Revision : .03.037 (SoundFont)
; Copyright 995-2004, Creative Technology Ltd.
[Version]
Signature="$CHICAGO$"
Class=MEDIA
ClassGUID={4d36e96c-e325-ce-bfc-08002be038}
provider=%MfgName%
CatalogFile=p7.cat
DriverVer=06/04/2004,5.2.0.34
Perhaps the Creative team can examine any changes between this driver and the current version to see what's going on.
Hope this helps some of the rest of you out there in SCP City!

My audio is really slow and distorted whenever I try and play a video sent through an emails

The audio of any video Link in my emails that I receive,when clicked on to play it, the vocals are very slow and distorted. It sounds like the monotone sound of vocals being distorted to make it unrecognizable. It has been this way ever since I downloaded and installed it.

Currently there is no Flash support for Firefox on Android. Fret not though, there are mobile developers working on front-end Flash support currently and if all follows through you will see Flash support in the near future in a future release of Firefox Aurora.

TV Tuner Audio failure followed by color distortion (a Total Mess)

Similar Messages

Maybe you are looking for