TV tuner cannot be used in Vista SP1 - Qosmio G

Hi
I have installed the Vista SP1, and when I try to see TV in media center, it says that "a required windows media center component is missing" or something like that.
When I try to configure it in the settings, it says that the hardware was not detected, and I have it installed, I can see that in the device manager.
Does some one have the same problem or have any ideas about how can I solve this?
Thanks,
Rafael

Hi
I have googled a little bit to find out what this error message could mean but it looks like this error is not specific.
This mean that different reasons could causes this issue
In you case I presume that the SP1 is not fully compatible with the TV tuner driver or the TV tuner does not work and could be recognized by MCE due to the tuner driver malfunction.
Sp my first advice would be the Tv tuner reinstallation.
Firstly remove the old driver from the device manager and then after a short reboot install the new downloaded driver.
Good luck

Similar Messages

My itunes stops responding. I am using win. vista sp1 and itunes latest version.

I have problem with itunes. when i visit the store or connect ipod my itunes stops responding and my windows says programe not responding. please help me.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

When I try to connect I tunes says "This IPod cannot be used because Apple Mobile Device service is not started." What does this means?

I wanted to reset my device and delete everything in it. When I try to connect I tunes says "This IPod cannot be used because Apple Mobile Device service is not started". I have tried the reset all content but I couldn't remember the password. Actually, I don't remember that I had one. How can I reset and operate it the latest OS? Thanks!

Do you have WinXP, Vista, 7? Or Mac OS X?
See here
http://support.apple.com/kb/ts1567

'Windows cannot install required files' error while installing Vista SP1

I'm installing Vista Client SP1 on my Macbook pro and getting the following error:
Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
Almost exactly as described in this KB article: http://support.microsoft.com/kb/930984/ except my error code is 0x80070017. I'm double-checked CRC on my dvd to ensure it's not corrupt. Also I've previously successfully installed Vista SP1 from the SAME DVD on a different Mac Leopard (desktop)
Any ideas? This is a new Macbook pro, just got it yesterday. Could be DVD drive issue?
Thanks!

Did you get far enough to delete the FAT partition BootCamp created, so you could create a new NTFS one?
http://support.microsoft.com/kb/933925
or this:
http://discussions.apple.com/thread.jspa?threadID=1464025&tstart=0

TS4463 I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened.

I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.

I tried rebooting. It didn't change anything.

I'm trying to sync a new i phone to i tunes. I get message that says cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

Cannot do wifi sync after update IOS 6 using windows vista pc with itunes 10.7

I cannot do the wifi sync,I am using IPAD 3 with IOS 6.I heard people said to do synchronous wireless.It would work I using Windows Vista,then I using Itunes 10.7.Somebody can help me to solve these problem or give me feedback to solve these problem.

Like many others, most of the the workarounds I tried worked but for awhile only and/or not reliably. After more googling and trial and error, I finally ended up with a somewhat reliable solution using the below 2 changes. (I am running up-to-date Win7 with an Ipad2 and an Iphone5 both on ios 6 + and up-to-date Itunes software on the PC).
1) Disable IPv6 on the wireless adapter (see CKNairb's earlier post)
2) Create a bat file which stops and starts the "Apple Mobile Device" service, then starts Itunes
The bat file can be placed in any dir and a desktop shortcut created to point to it in order to easily start Itunes (right-clicking properties of the shortcut and clicking "Change Icon" will even allow the selection of the Itunes icon to make it look just right :-) )
The bat file should contain these lines:
net stop "Apple Mobile Device"
net start "Apple Mobile Device"
"C:\Program Files (x86)\iTunes\iTunes.exe"
Edit accordingly as to whether your Itunes.exe resides in \Program (x86) or \Program.
By starting Itunes using this shortcut/bat file, you will ensure that the Mobile Device service is up and running when Itunes attempts to locate the devices wirelessly - this seems to be the key issue here.
Although it is not 100% reliable, I would say that both devices are detected and synced 90% of the time. (Itunes will always find one of the 2 devices).
Anyways, based on all I have gone through to get this work, I am willing to settle for "almost reliable" solution - hopefully this may work for others as well.
Happy syncing!

I plug my i-phone 3gs into i-tunes on my laptop and get this error: This -iPhone cannot be used because the Apple Mobile Device service is not started

I plug my I-Phone 3gs into iTunes on my laptop and this error comes up : :This iPhone cannot be used because the Apple Mobile Device service is not started". Its doing this on my phone and my wives, both 3gs's. Is there a setting in i-tunes somewhere? I just finally got I-tunes downloaded on my computer after a corrupt file problem

See http://support.apple.com/kb/TS1567.

Vista SP1 using Boot Camp

I have a MacBook Pro and installed Vista SP1 using Boot Camp. Vista ran fine but I noticed that there's no bluetooth control panel anywhere (it seems like OS Leopard isn't installing drivers). Any suggestions? Thanks!

There is no such "prompt" to install your disc, other than the written word, of course.
http://support.apple.com/kb/HT1845
http://support.apple.com/kb/HT1999
Boot Camp FAQ:
http://docs.info.apple.com/article.html?artnum=306823
- which comes from Support page:
http://www.apple.com/support/bootcamp/
http://www.apple.com/support/leopard/

Firefox process keeps running. I cannot open a new session until I manually stop Firefox 32 process in tax manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

Firefox process keeps running. I cannot open a new session until I manually stop Firefox 32 process in tax manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Firefox Hang at Exit
* https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Check and tell if its working.

I tunes keeps telling me that this ipod cannot be used becausethe apple mobile device service is not activated. I cannot get thie device to even come up in itunes.

I-tunes keeps telling me that this ipod cannot be used because the apple mobile device service is not started. It was previously working and syncing, but now windows doesn't seem to be recognizing it. What can I do?

Hi there! You can fix this error by doing the following:
1) Click your Start button in Windows, and click "Run".
2) In the box that appears, type "services.msc" (without the quotes) and hit enter. A new window with a big list will appear.
3) Find "Apple Mobile Device" service in this list, right-click it and go to "Properties".
4) In the window that pops up, make sure that drop-down box is set to "Automatic", then click the button that says "Start". A progress bar will briefly appear and disappear and it will be started. Click Apply/OK.
5) Try running iTunes again, it should work!

I am trying to synch my iphone but when i tunes starts it doesnt display the device in the left hand column and a box comes up saying "This iphone cannot be use because the Apple Mobile Device service is not started" I have synched this phone many times

i keep getting a message when i try to synch my iphone "This iphone cannot be used because the Apple Mobile Device service is not started" I have synched this phone with this computer many times before with no problems. Can anyone please shed any light on how to fix this? thx

See Here
http://support.apple.com/kb/TS1567

I am trying to get my ipod to work and when i plug my ipod in to my computer with i tunes on i get the message " the ipod cannot be used because the mobile device service is not started" what does this mean

I got the message "the ipod cannot be used because the mobile device service is not started"...when i plugged my ipod in with itunes running

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

My i tunes wont allow my ipod to connect.It tells me that it cannot be used because the apple mobile device service is not started. how do i correct this

itunes used to accept and sync ipod touch but all of a sudden it gives me a box that says it cannot be used because the apple mobile device service is not started.what is the mobile device service and how do i start it?

This tells you.
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

HT1567 cannot import cd into iTunes using Windows Vista

I have tried everything and am unable to import an MP3 audio CD into iTunes using Windows Vista. I am able to import regular audio CDs. Any suggestions?

Hello,
I would first suggest recreating your iTunes library file:
http://support.apple.com/kb/HT1451
If that doesn't resolve it, try pulling your iTunes preferences:
Quit iTunes if it is running.
Navigate to /User/Library/Preferences/
Drag com.apple.itunes.plist to the trash
Restart the Mac
Launch iTunes again
CG

TV tuner cannot be used in Vista SP1 - Qosmio G

Similar Messages

Maybe you are looking for