TV TUNER CARD AND SATELLITE TV

I have a new Pavilion dv6t 1100 CTO Entertainment Notebook with a built-in TV tuner card. I receive my TV signal via DISH Network satellite TV. I have a HD DVR receiver downstairs that hooks up to the main TV with an HDMI cord. All the other TVs hook up via the co-ax cable running through the walls. I am trying to hook up this laptop computer to one of the wall jacks upstairs. I ran a co-ax cable from the wall to a little adapter and then into a tiny input hole in my laptop. I then clicked on the MediaSmart icon on my computer's desktop and went through the setup. None of the sources really apply but according to my device manager, they sold me an ANALOG TV Tuner. I tried to set it up using the analog antenna setting but do not get any picture or sound even on channel 60 (where I get my DISH Network programming). My question is how do I set it up to work now, and what should I do next month when all analog signals stop? I can't believe they would sell me an analog card!!! Thanks for any help you can give me.

I JUST BOUGHT A NEW MEDIA CENTER (M9500T) AND I WAS GOING CRAZY TRYING TO GET MY TV SIGNAL. I WAS ON THE PHONE HOURS AND HOURS TALKING AND FINALLY I SAID LOOK I BOUGHT THIS PC FOR THE MEDIA CENTER AND SOMEONE NEEDS TO GET IT RIGHT. HP WAS SAYING CALL DISH AND DISH WAS SAYING THAT THEY DID NOT KNOW WHAT TO DO THAT I NEEDED TO CALL HP. I HAD THE 3YEAR WARRANTY WITH INHOME SERVICE. FINALLY THEY SENT SOMEONE TO FIX IT. THEY SAID THAT I HAD AN ANALOG RECEIVER AND SENT ME ANOTHER ONE BUT WHEN THE GUY CAME TO PUT IT IN THE ONE I HAD WAS DIGITAL AND ANALOG. MY DISH GUY HAD IT SET TO PLAY ON CHANNEL 60 WHICH WORKED FINE ON MY OLD MEDIA CENTER (M1280N) BUT IT WOULD NOT WORK ON THIS ONE. HE ALSO SAID THAT IT WAS RECEIVING ON ANTENNA BUT THE REPAIR MAN CHANGED MY CHANNEL TO 73 AND DIGITAL ON  MY DISH AND IT WORKS. THE ONLY PROBLEM IS THAT I HAVE TO SET MY SHOWS TO RECORD MANUALLY AND IT HAS TO BE PLAYING ON 73. WHEN I SET IT UP TO RECORD ON DISH WHEN IT COMES UP TO CREATE TIMER GO TO THE FIRST LINE THAT SAYS THREE THINGS. (I AM AT WORK AND I CANNOT REMEMBER WHAT THE MIDDLE ONE SAYS BUT THAT IS THE ONE YOU USE. THE FIRST THING IS DVD AND THE LAST IS REMINDER. THE MIDDLE ONE WILL CHANGE THE CHANNEL TO WHAT YOU HAVE SET UP TO RECORD ON THE DISH AND THEN IT WILL RECORD ON YOUR COMPUTER. I HOPE THAT THIS WILL HELP YOU SOME BECAUSE IT IS REALLY FRUSTRATING. DISH NETWORK OR EITHER HP NEEDS TO GET THIS PROBLEM SOLVED SO THAT YOU CAN USE YOUR MEDIA CENTER LIKE IT IS SUPPOSE TO. I CANNOT GET CABLE OR I WOULD CHANGE OVER BECAUSE IT WORKS GREAT WITH IT. 

Similar Messages

  • Tv tuner cards and satellite dishes

    are there any tv tuner cards that can control a satellite box? i know there are a couple that can accept the input from one, but can any actually change the channels on one?
    thanks!

    I JUST BOUGHT A NEW MEDIA CENTER (M9500T) AND I WAS GOING CRAZY TRYING TO GET MY TV SIGNAL. I WAS ON THE PHONE HOURS AND HOURS TALKING AND FINALLY I SAID LOOK I BOUGHT THIS PC FOR THE MEDIA CENTER AND SOMEONE NEEDS TO GET IT RIGHT. HP WAS SAYING CALL DISH AND DISH WAS SAYING THAT THEY DID NOT KNOW WHAT TO DO THAT I NEEDED TO CALL HP. I HAD THE 3YEAR WARRANTY WITH INHOME SERVICE. FINALLY THEY SENT SOMEONE TO FIX IT. THEY SAID THAT I HAD AN ANALOG RECEIVER AND SENT ME ANOTHER ONE BUT WHEN THE GUY CAME TO PUT IT IN THE ONE I HAD WAS DIGITAL AND ANALOG. MY DISH GUY HAD IT SET TO PLAY ON CHANNEL 60 WHICH WORKED FINE ON MY OLD MEDIA CENTER (M1280N) BUT IT WOULD NOT WORK ON THIS ONE. HE ALSO SAID THAT IT WAS RECEIVING ON ANTENNA BUT THE REPAIR MAN CHANGED MY CHANNEL TO 73 AND DIGITAL ON  MY DISH AND IT WORKS. THE ONLY PROBLEM IS THAT I HAVE TO SET MY SHOWS TO RECORD MANUALLY AND IT HAS TO BE PLAYING ON 73. WHEN I SET IT UP TO RECORD ON DISH WHEN IT COMES UP TO CREATE TIMER GO TO THE FIRST LINE THAT SAYS THREE THINGS. (I AM AT WORK AND I CANNOT REMEMBER WHAT THE MIDDLE ONE SAYS BUT THAT IS THE ONE YOU USE. THE FIRST THING IS DVD AND THE LAST IS REMINDER. THE MIDDLE ONE WILL CHANGE THE CHANNEL TO WHAT YOU HAVE SET UP TO RECORD ON THE DISH AND THEN IT WILL RECORD ON YOUR COMPUTER. I HOPE THAT THIS WILL HELP YOU SOME BECAUSE IT IS REALLY FRUSTRATING. DISH NETWORK OR EITHER HP NEEDS TO GET THIS PROBLEM SOLVED SO THAT YOU CAN USE YOUR MEDIA CENTER LIKE IT IS SUPPOSE TO. I CANNOT GET CABLE OR I WOULD CHANGE OVER BECAUSE IT WORKS GREAT WITH IT. 

  • My daughter added songs with her I Tunes Card and My credit card was charged, what do I do?

    My daughter added songs with her I tunes card and my credit card was charged, how do I get it off my credit card?

    What process did your daughter use, there is a specific format to redeem an iTunes gift card. The gift card must be redeemed using the Redeem link in the Quick Links on the right side of the iTunes Store in iTunes on a computer or the Redeem button at the bottom of both the iTunes and App Store apps in iOS. Redeeming the gift card then applies the value of the card as an available credit to the user's iTunes account. The credit is used first before any bank card also stored in the account. If the purchases use the entire credit and there is an additional balance due, it will be charged to any bank card stored in the account.

  • I just bought at $50 I tunes card and I rubbed it to hard and can't read it. What do I do?

    I just bought a $50i tunes card and rubbed it to hard and I can't read it. What to do?

    Click here and request assistance. Supply the iTunes Store staff with as much of the code as you can.
    (87562)

  • I have a i tunes card, and have rubbed the code, but it smudged so i cannot read it , what do i do know, the store i bought it from said i need to contact apple, its not down to them. john

    i have a i tunes card, and have rubbed the code but it smudged so icannot retrieve it, what do i do know. john

    You need to contact iTunes support directly.
    You can see contact info here: http://www.apple.com/support/itunes/

  • I keep putting the code in for a i tunes card and it keeps telling me the card has been redeemed but i cant see any money on my account

    i keep putting the code in for a i tunes card and it keeps telling me the card has been redeemed but i cant see any money on my account

    The receipt usually takes more time to receive. I got my receipt from about 7:00pm yesterday at about 10:00pm today.

  • HT1689 Hi I Got $15.00 Doller's On My !Tune Cared And Yeah I Go To Downloaded My Carded And It's Asking For More Like My Visa Carded And There's Are Other's And I Got Those !Tunes Carded And It's Not Doing Any Gooded?

    Hello I Got A Little Problem ? And Yeah My Mother Got This At Target Store And Yeah It's A !Tune Carded And It's Costed About $15.00 And Yeah I Go to !Tunes And Downloaded The Coded In And Yeah It Took The Bait And They I Go To My Music That I Whated And Picked It Too Go Too My Downloading Box's And Then It's Telling Me How She's It Book Me By Saiding A Visa Cared , Amercian Carded , And Maybe The Other 2 And but the Last One Saided None? And Still I Can Get My Song's From Here? And I Do Have The Carded? I Really Do Not Understand Why Is This is Happen to Me?

    i cant exactly can't understand what you mean to say but if you already have an apple ID which i bet you do. then you can redeem the $15 by clicking on the "redeem" option in the itunes store on mac/pc. the redeem option is loacted under the quick links table.

  • I've recently purchased 2 x i-Tunes Cards and they won't redeem

    Hi
    I've recently purchased 2 x i-Tunes Cards and they won't redeem on i-tunes. I keep getting the message 'Your session has timed out. Try again.' - for each card.
    I did do, repeatedly, even after re-booting. I still received the same message. I purchased both cards on 7 Sep 2012 and tried redeeming them today (25 Sep 2012). Help! I'm £30 out of pocket!
    I currently run a PowerPC G5 Mac, with OSX 10.4.11. I've just downloaded some music perfectly well 5 minutes ago, but these 2 cards won't redeem. Help!

    You would need to contact apple support about this. I had a card that wouldnt work properly (turns out I couldnt read the code because i scratched off the bottom on an R and it looked like a P to me!). They will be able to sort you out on the phone or email.
    Ryan

  • I bought a 15$ i tunes card and i was scratching it and it peeled off and i cant read 9 or 10 letters and i cant find were to go can anyone help me im 14 and i have never done this before

    hi im 14 and i was scratching a i tunes card i got from macs across town and it peeled off so now i am stuck and cant get to the place were to fill out the info for it so i can buy black ops zombies ascension for my iphone and ipod and i cant see 9 or 10  digits and i am realy stuck please message me or help me please i really wanna buy it kk thanks for having ur time

    See http://www.apple.com/hk/en/support/itunes/store/giftcard/

  • MSI TV tuner card and HDTV

    I decided for grins to connect my Pioneer Voyager HDTV box from Timewarner Cable TV (AOL) into my MSI TV tuner card to see what kinda picture I would recieve.  Well, first I should say I am only allowed to use S-video and not the HDTV component cables (3), but it works.  Timewarner at this time only offers 10 HDTV channels and rest or either digital (DVD quality) or analog.  Some of the HDTV channels do not completely fill the screen and I have to adjust my screen to fit, but this is not to much effort.  Some HDTV channels fit the screen but are in wide screen only and not full screen, but this was still pretty cool.  I watched some of the wimbleton tennis in HDTV on my computer (awesome picture quality)    
    I am guessing that when HDTV becomes more popular and prices drop, that perhaps MSI might consider building a TV tuner card with HDTV outputs??

    I have been seeing some amazing video using my msi TV-Tuner card (older card) and HDTV S-video inputs from my digital HDTV cable box.  I understand what SteveK is saying about how S-video is not capable of displaying 1080i, but dang it looks awesome using dscaler.  I did some searching and this guys says:
    A better solution is S-video. Almost all players have s-video output. S-video looks much better than composite video, and only slightly inferior to component video. Hook an s-video cable from the player to the display (or to an A/V receiver that can switch s-video). The round, 4-pin connectors may be labelled Y/C, s-video, or S-VHS.
    Link found here:  http://www.home-theater-faq.com/whats_the_difference_between_composite_s-video_component_and_rgb_video.htm
    Anyway I found some similar links that said about the same.  In any case, if anyone wants to play with the HDTV viewing using dscaler and an HDTV s-video connection, it might be of interest.

  • TV Tuner Card and Signal for AVerMedia A323 Hybrid ATSC

    Community, need a little assist.  Here is my set up
    TouchSmart 520-1070 w/
    Windows 7 - 64 bit
    Windows Media Center
    AverMedia A323 MiniCard Hybrid ATSC
    Cox Communications Cable
    No cable box (straight out of the wall)
    This is a replacement of my Slimline s5260F which contained a Hauppauge ATSC and NTSC TV tuner.  I have input my cable and am attempting to tune my channels, however, following the scan for channels, the return is that there are no stations.  I have attempted to set up manually on different settings to try and pick up a signal, but to no avail. 
    My previous card could pick up the analog channels as well as some of the standard HD channels for the big (CBS, NBC, ABC).  Again, no cable box, just straight out of my wall into the computer.  To my great surprise, that tuner card, even picked up some of the channels such as ESPN, CNN, Discovery (not HD, but still).  I attribute this to the cable company actually having a digital signal into my home, but not having the box would keep me from seeing these channels.  I really don't care if I don't see those with my new TouchSmart.
    However, I can't even get a standard analog setup.  It will pull down the guide in Media Center which then identifies that I have a Clear QAM digital signal.  I run the channel setup and nothing comes back.  All I get even on the non-HD channel is some of the audio and then just scrambled signal.  If I go back an manually set up with just an analog signal, it doesn't change a thing, so I'm kind of at a lose.  I have digital quality signal but no way to pick that up and I can go back to my standard analog channels. 
    Does someone know the work around where I don't have to: 1) lay out more money for an adaptor for my computer to decode the digital signal, or; 2) have to pay a cable company to install a cable box and start paying more money to watch digital TV.  All I'm really looking for is to record a few shows from the major networks. 
    Regards and thanks in advance!

    Hello Compute_This:
           Sorry body your TV tuner will not work period no mater what you do. Please read this full article at the very bottom of it is the collusion from tuners company. http://www.fathsoft.com/support/index.php?a=5&cat=2&tid=923 
    I would take it back and get my money back. If not able to that then put it on line and sell it to some one outside of USA. They can use it because they are still using Anog. TV signals. Here is one that is supose to work least that is what it says in detail information on this page. http://www.antonline.com/p_MTVHVMXSK-NX_751196.htm?sID=NX Here is another one to veiw. Specks for it at bottom of page This one includes FM tuner as well. http://www.buy.com/prod/kingston-16gb-datatraveler-109-usb-2-0-flash-drive-black-and-white/225557322... Most of the tv tuners I searched won't work on windows 7 computers and are for Anlog TV like the one you have. These are the only two I could find that say they are HDTV for windows 7. I went and checked all they had listed for pc tv tuners. Read costomers reviews if it was listed. You do same and save your self  money and headaches. Your welcome frrw. I would have posted this sooner how ever I was still researching there where alot tv tuners listed.

  • Loaded $25 tunes card and discovered that someone may have hacked the system by loading unwanted tunes onto me desktop and devices. What to do.....if anything at this point?

    Loaded $25 tunes card to iMac a while back. Couldn't find where it was on the system. Plugged my synced iPod into a new car's USB and learned that many new songs that I did not select play on the car stereo. Have no idea how they got selected, but Apple store did a check and the $25 has been used up. All songs read out ''indentifiable'' and even include an interview of Howard Stern. Crazy.
    Anyone have a clue how this happened? Not a big deal, but my $25 is gone and I have a bunch of unwanted tunes.
    Tom
    [email protected]

    Yes I have back ups I have Time Machine running, I guess that will be my trouble shoot.
    IMac is running OK at the moment after I uninstalled MACKEEPER and was that a chore! I was really looking for some interpretation for the Log report related to the Panic Attack to C if it pointed to a particular application or hardware. The IMAC has been really stable since I bought it in 2010 and I have not added any other HW for at least 12 months. The only recent SW added has been that Ancestry product, I did change my ISP a few weeks ago but still using the same router so that should have no bearing.
    Thanks for the feedback 

  • Problems w/ TV Tuner Card and Media Center

    Hi all,
      Just wondering if anyone else is having this problem:
    I just installed the FX5200 TDR-128, with the TV@nywhere card, and the Media Center Deluxe II. I can't get the tv stations to work in MCD II. It works great with MSI PVS software that came with the TV Tuner card. When I go into the "Watch TV" menu of MCD II, it brings up the tv screen but it is all garbled or sometimes a blue screen. I changed all the settings to the appropriate formats and it even has the channels that were scanned in the MSIPVS program. Does anyone know what is causing the channels to not work in the Media Center Deluxe II? Also there is a switch on the VIVO connector that has two settings "Safe" and "Work" what does this switch do? I can't find anything on it in the manual that came with the video card.
    P.S. The remote works great.
    Motherboard:KT4V-L
    CPU: AthlonXP 2400+
    RAM: 512Meg DDR400
    Video: FX5200 TDR-128
    OS: WinXP

    Check out the new release 3 upgrade here
    It has solved almost all the problems described here.  Just came out today too.

  • I loaded my I tunes card and it was accepted. Now I can't remember my log in I'd or password. What are my options?

    I loaded my iTunes card and it was accepted. Now I can't remember my ID or password. How do I retrieve it?

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • HT1918 i have a balance due and would like to adjust it to my new I tunes card and not the entered credit card. how do i do it?

    i have a balance due and would like to move it to the new Itunes card i just activated

    System Preferences does not exist in Mac OS 8.6.
    Select Control Panels from the Apple menu.
    Select the TCP/IP control panel.
    From the File menu, select Configurations...
    If Ethernet is available, select it. If not, select Default, then Duplicate, name it Ethernet, click OK, and select Ethernet.
    With Ethernet selected, click Make Active. The TCP/IP control panel window will reappear.
    Connect via: "Ethernet built-in"
    Under "Setup", next to Configure, select "Using DHCP Server".
    Close the window and when asked to save changes, click Save.

Maybe you are looking for

  • How to use Identifiers to route IDocs

    In XI we will receive XML files from many different parties and map them to ORDERS IDocs. This IDoc type demands that in order to convert external party numbers to SAP internal, the IDoc must be mapped correctly to a customer partner profile (the SND

  • "Dependent Requirement"

    Dear Gurus, I am taking mrp run for variant material and dependent requirement is generated but not any purchase requisition  is created for raw material. I have set collective requirement in mrp4 view and and i dont have stock for raw material. Plea

  • Operating systems supported by the PC-TIO-10 board

    I am updating a Windows application that uses the PC-TIO-10 National INstruments board (via an ISA slot). What operating systems does the PC-TIO-10 drivers run on ? Thank You !

  • 1)Paying online. 2) Don't want messages left by Verizon control

    1) Just made payment online and last 10 minutes payment won't clear because red dots keep going in circle. I need the confirmation #. 2). When a message is left on answering machine , I have to dial Verizon services and give a pass code. I don't want

  • HT201376 Nothing happens when pressing Command+R during reboot

    I am trying to do a factory reset on my computer, and I have tried at least 30 times to restart and hold down the Command+R Keys and absolutely nothing happens.  I have tried during different intervals during the reboot, and have tried doing it after