TV tuner settings

I have a Pavillion Elite HPE 440f with Windows 7 and a TV tuner.  I have satellite TV. The TV tuner only searches channels 2,3 & 4 for a signal but it is on another channel. How can I get the tuner to search other channels for the signal?

North American and other users of simple NTSC need not and should not apply unless they do not mind seeing CH 2 (Cable) disappear.

Similar Messages

  • I have recently upgraded to an iphone 5. When trying to sync/ back up with my current i tunes settings. I get the message the it 1.6GB over the storage capacity. Although when syncing my i phone 4 (same size 16GB) i do not have any problems?

    I have recently upgraded to an iphone 5. When trying to sync/ back up with my current i tunes settings. I get the message the it 1.6GB over the storage capacity. Although when syncing my i phone 4 (same size 16GB) i do not have any problems?' I am not sure what the problem may be?

    iOS uses more memory on the iPhone 5 than the iPhone 4 because there are quite a few more to iPhone 5. Therefore there will be less memory available on the 5. Reluctantly iOS 7, coming this fall, uses a bit less memory than iOS 6 so if you can do without a few apps until then you should be gravy!

  • I tunes problem driving me mad - please help

    Hi, I've just got a new laptop and have installed i-tunes on it. I have copied all my music to the hard drive from my previous computer and i-tunes has has automatically placed all of the music in the i-tunes library. The problem is that for some reason the library is showing 3 copies of each song even though there is only one of each on the hard drive. i have tried removing i-tunes and reinstalling but it is still happening. i have looked through the i-tunes settings but can't work out why it is happening. i dont want to have to go through the library deleting songs as it would take forever...
    Has anyone else had this problem? any help would be greatly appreciated
    Thanks

    sometimes different songs are placed under one name and also it looks through multiple directories.try to single the folder out for music and then it might work
    hope i helped.

  • How can I disable Another Device from adjusting I-pod-4 volume

    My 2010 harley has a stock radio, I added the factory I-Pod controler! When used the controler turns down the PODs volume 50% ! Is there a way to turn off remote volume adjustment of POD?

    Have not tryied that! saw at one time in I-TUNES settings, dissallow remote setting of volume! but with up dates cannot find it any more!

  • My wishlist after 1 year with Lightroom

    I have used LR for the past year as my primary workflow tool and have grown to really appreciate the productivity it delivers. However, we all know there is room for improvement. So I thought I would take a little time to read through the feature requests in this forum, consider my own needs, and assemble a list of the key features that would really matter for my workflow.
    A little background I primarily shoot sports often shooting 300-1000 frames per event. I use LR to select, correct, and crop my keepers then export them to my website for sale. I will spend more time fine tuning some the better images, build galleries and occasionally print. I really havent found a need for slideshow. I now have a little over 40k images in my primary catalog. I am at the point where I need more productivity processing the images, particularly for noise removal and color correction, and better tools for managing a larger volume of images.
    I hope you find this useful.
    a) Better camera calibration - integrated with LR maybe a built-in tool designed to work with a standard color checker
    b) Better noise reduction (Noiseware-like)
    c) Previews with NR and sharpening applied
    d) Improve auto-toning perhaps with configurable options like auto-levels in PS
    e) Some kind of magic tool to help correct color when dealing with cycling vapor lights (I shoot a lot of indoor sports in caves) - maybe skin-tone driven. Am I dreaming?
    f) Geometry correction tool in lens corrections
    g) Gradient tool or similar for ND-like effect to help fix skies etc..
    h) Green-eye removal tool
    i) Improved spot removal/healing (make it work consistently when applied to the corner of an image)
    j) Grain control to help emulate film look
    k) Output sharpening in export USM or similar, ideally with some sort of preview feature to enable you to fine tune settings
    l) Output sharpening in web galleries again, USM or similar with some sort of preview
    m) Improved export plug-in architecture need a formal approach for combining/chaining plug-ins on export (piglets seem a tad limited and they are cumbersome to install and manage)
    n) Lua needs to offer the ability to bind in external DLLs or similar libraries (command-line invocation is too crude and slow, and flashing windows consume focus making it impossible to use another tool while export is running)
    o) Softproofing for print output
    p) Faster performance when scrolling images in grid mode (Elements can do it, why cant LR?)
    q) Better tools for backing-up/archiving sets of folders to offline storage
    r) Archive to DVD / burn disc feature
    s) Plug-in architecture for image processing components
    t) Vignette effect tool that works with crops with the ability to set the center-point manually
    u) Ability to move sets of folders in one operation

    I think Travis has produced a well thought out list.
    I agree with most of it, except that I would put somethiings
    higher up the list.
    (BTW: Thanks to the Adobe team for the antifringing improvements
    they actually work and are great!)
    I am a pretty intensive user of LightRoom. I only have 20K images
    but the flow rate has increased and although I find LR to be very
    efficient the limitations are starting to bug me. Hence I am always
    hoping for an update that delivers some more functionality.
    My List: (Shorter, but things left off do not mean I don't want them!)
    1. Need a better starting point than just the raw with invisible camera calibration presets applied.
    a. I want a lot more control over the auto application and set up of camera calibration presets. An ISO 100 image is handled way differently to an ISO 800 or 1200.
    b. I want an auto toned, colored (something like "Perfectly Clear" used in BibblePro) as my start point. In otherwords I want a way more
    intelligent start point then the current fairly crude and invisible
    one. (Other auto engines include ColourScience, DXPro). However at
    present I prefer the Perfectly Clear. Some of these do things like
    move greens and blues to nicer hues, remove green (or other) color
    casts, local contrast enhancement, face detection and de-redding
    skin tones e.g. ColourScience) etc.
    c. The option to plugin 3rd party stuff (in particular global
    auto editors) and to set it an intelligent default start point.
    (I know the start point won't be right for every image but it
    will be for a enough to make it really valuable.)
    2. The Sharpening (though improved) and Noise control needs to be
    much better. At present the preview does not reflect sharpening
    changes accurately.
    (I have a v-large, high gamut monitor and sharpening and noise changes
    are accurately reflected in BibblePro but not LightRoom).
    2. More global image edits need to be available. For example- transformations (e.g perspective, lens distortion correction, ND
    gradient exposure adjustments, Chanel mixer, etc).
    3. Sometimes the LR controls are too coarse, I would like some way to
    quickly (e.g. hit "minus" a few times) reduce the range of these some of the controls. Or maybe better choice of range for some controls
    could be based on preset or on adjustable default settings, e.g.
    right click brings up gain control on each slider say!?.
    4. As a image manager it is a problem that LightRoom has a problem with some large images. LightRoom should simply handle the lot
    no questions asked. In particular I have photoshop pano tiffs that
    LR complains about. Also it would be great if I LR could process
    my BibblePro files. (BiblePro uses ".bib" files in place of ".xml"
    to do exactly the same thing as LR.)
    5. Collections are way improved, but still need more control over
    them. i.e. ability to sort on a number of criteria. Also joining,
    dividing, evaluating images independently of ratings in underlying database/catalogue.
    Anyway I hope the LightRoom Adobe team keep up the good work.

  • "This drive is not ready for use; it's door may be open ..."

    Hi.
    I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
    However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
    "The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
    This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
    As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
    Any ideas would be very much appreciated.
    Thanks.
    DELL Inspiron 4150   Windows XP  

    Hullo ...
    let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
    That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
    It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
    Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
    Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
    Thanks.

  • Display problems after update

    I recently updated- on balance things went ok-
    How ever for some odd reason something is causing KDE (3.5) to behave oddly-
    I used to have a app in the kde control panel that'd let me fine tune settings  (fonts and display size for instance)- I see the app but not how to fine tune the settings other than for gamma and color-
    I can use the nvidia-tools to do some of that- however something is causing my directories to display incorrectly meening that when double click on say- /home/(username here)/ I have a big fat square block where files used to be- and any window moving over that gets fairly well corupted.
    I can sort of work around this by changing from"icon view"- to info list view.
    I'm not sure how to fix this
    Anyway any kind of direction at all about what's causing this problem is great.

    I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.

  • OT: Monitor recommendations for graphic design/layout

    My Samsung 204B just bit the dust after only about 1.5 yrs and need another 20" or so standard aspect monitor...NOT a wide screen. It's really aggravating everything's going to wide screen and leaving us graphic/layout designers to fend for ourselves. I'm looking at the 20" Viewsonic VP2030b but have read a few negative reviews from graphics people. And I don't think I want another Samsung since this one didn't last very long and it was starting to display dead pixels. The one good thing about the 204B while it worked is the ability to fine tune settings to match the printer that handles the magazine I do the layout for, and colors are very accurate. So that's what I'm looking for...accurate color and ability to fine tune settings...RGB, Gamma, etc.
    Any suggestions?
    DC

    OK, here's the deal....and in answer to Kenneth Benson's "What's wrong with a wide screen?"
    It depends on what your needs are. All graphic designers I know including myself like to see a whole page or pages vertically on the screen AT THE LARGEST SIZE POSSIBLE without having to scroll or rotate the screen. With my now defunct Samsung 204B, at 1600 x 1200, pages fit on the screen perfectly without having to scroll, and the image was large enough to easily read the text. My backup monitor that I'm using now is a 17" LG Flatron L1720P with a native res of 1280 x 1024 and with the shallower 1024, the page is smaller and more difficult to read the content at full view...which is why I went with the Samsung. A 22" wide screen has a native resolution of 1680 x 1050 which is of no help for my needs since pages will be basically the same size as what I'm seeing on this 4x3 17" monitor. A vertical res of 1050 is pretty much the same as 1024, so there's no real vertical gain. The only value of a wide screen that I can see is allowing me to spread out menu and tool boxes in InDesign, Photoshop, etc and get them away from the page I'm working on, but I'm now so used to working with a larger image at 1600 x1200, that for my needs it'd be two steps backwards going with a wide screen. It all comes down to what's best for the type of work you do.
    DC

  • Drive not ready for use, door may be open

    iTunes transfers about 800mb of content before error message appears:
    The drive is not ready for use; its door may be open. Please check drive\...
    I have restored, formatted, tried different PC's always get same result. Visited genius bar and they declared that my iPod was healthy but refused to move enough content to the iPod to reproduce the problem. iPod is a little under 2 yrs old.
    My confidence and respect regarding Apple and it's products is now greatly in question. I spent $400 duchats on this thing and I am starting to feel like an unappreciated client.
    Thanks for any help...

    Hullo ...
    let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
    That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
    It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
    Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
    Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
    Thanks.

  • Chroma Key object creates only an apha channel when a second object is blended

    Hi there,
    I try to use the chrome key effect to have a person speaking in front of a background.
    So I have 2 objects.
    Video 1 = background (jpg-image)
    Video 2 = video object edited with chrome key effect.
    Layering both levels I see the background with the alpha channel of the second layer on top.
    If I decative the first level (Video 1 = jpg image) I can see the videoclip with the transparent backgound.
    What am I doing wrong?
    Can anybody help me with that issue?
    Looking forward for ideas...
    Thanks from Germany!
    Tom

    Ultra key is the best choice for chroma keying.
    Video with ultra key set on higher layer. In Your  Effects Control Tab , the Opacity Settings value should at 100 with the blend mode set to normal.
    Ultra Key (UK) set up should be listed beneath the Opacity & Time Remapping settings. Use the color picker in UK to select the green in your source clip.
    Then fine tune settings. I like setting UK's output the Alpha when I am adjusting the quality of Key, then back to composite for preview and normal viewing.
    You can prep the footage for keying with fast color corrector, boosting the chroma saturation and heightening the contrast(watch out for over bright whites) a little bit.
    Still image on lower layer with no keying added and opacity blending on normal.

  • InsufficientMemoryException while sending large byte array in WCF Service callback

    Hi
    I have a datacontract with a large byte array that is passed by the WCF Service back to the client using a callback contract.
    Until the byte array size remains below 25-30 MB, it is passed OK, but as soon as it exceeds that, an InsufficientMemoryException is thrown on the service side. I have set the max message sizes at 100 MB and using MTOM Encoder.
    I am using WSDualHTTPBinding with sessions and message security - hence streaming is not an option. I know chunking channels are an option, but I want to try to tune the service and client to maximize the byte array size which can be sent over a normal channel.
    Kindly advise how to tune settings to get to around 100 MB byte array size.
    Binding section of web.config is given below. Same settings for sizes are used on client.
    Thanks
    Abhishek
     <wsDualHttpBinding>
            <binding name="WSHttpBinding_IService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false"
    transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="100000000" maxReceivedMessageSize="100000000" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true">
              <readerQuotas maxArrayLength="100000000"  />
              <security mode="Message">
                <message clientCredentialType="Certificate" algorithmSuite="Default"  />
              </security>
            </binding>
          </wsDualHttpBinding>

    Hi abhisinghal21,
    >>InsufficientMemoryException while sending large byte array in WCF Service callback
    First please try to increase the timeout value in the both client and service side to see if it works:
    closeTimeout="00:10:00" openTimeout="00:10:00"
    receiveTimeout="00:10:00" sendTimeout="00:10:00"
    Then since you do not want to the use the Chunking option to help you, maybe you try to change the wsDualHttpBinding to use the binding which supports the streaming mode and supports callback.
    In streaming transfer mode, the receiver can begin to process the message before it is completely delivered. And the streaming mode is useful when the information that is passed is lengthy and can be processed serially. Streaming mode is also useful when the
    message is too large to be entirely buffered. So it will be better for you to use the streamed mode.
    For more information, please try to check:
    #How to: Enable Streaming:
    http://msdn.microsoft.com/en-us/library/ms789010(v=vs.110).aspx .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Premiere Elements 10 slow on Mac

    Hi,
    I installed Premiere Elements 10 on a brand new computer, but it runs extremely slow.
    Even just playing one short 30 second clip (un-edited, the original file) causes lagging.
    I made sure that the project is up to par with the camera settings and that there are no red lines above the timeline.
    These are my computer specs:
    MacBook Air
    Processor  1.7 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 5000
    Software  OS X 10.9.3 (13D65)
    As I said, it is brand new so I don't have almost anything on it but PE10 and the files I need to edit for work, so I don't think it should be a space issue.
    I'm not much of a computer wiz, so I might be missing on some important info I need to share.
    Please let me know if you need to know anything else.
    I really appreciate the help and sorry for the inconvenience, but I couldn't find a solution anywhere else on-line.
    Thank you!

    S
    Thanks for checking out the jpg and other video source Timeline performance. Enough of that. I think the results are pointing us specifically to the Panasonic footage. 
    Based on online description of your Panasonic recordings, I assumed that you were putting AVCHD.mp4 1080 50i on your Premiere Elements Timeline. In your last post your wrote...
    I only have one other source, but it's the same type of file (.mov)
    That would mean to me that you do not have .mp4 files but rather .mov files from the Panasonic. Could you double check that point - .mp4 or .mov? Under ordinary conditions one would expect AVCHD.mp4 and AVCHD.mov to be compatible with Premiere Elements with QuickTime installed on the same computer with Premiere Elements.
    Right now we have
    jpg, OK
    another .mov source, OK
    Let us try this for troubleshooting purposes only....take what your source video AVCHD.mov or AVCHD.mp4 and put it through the HandBrake program.
    http://handbrake.fr/
    This is going to be only a quick test. We can go back and fine tune settings later if necessary.
    Open HandBrake to its Main Workspace
    Source/Open File
    Where it says Chapters, I typically set that to Seconds.
    Destination - Browse to and set the hard drive save location for the HandBrake export
    Output Settings = Container Mp4
    Picture Tab (leave settings as is)
    Video Tab
    Video Codec = H.264 (x264)
    Framerate = 25
    and then
    dot "Constant Framerate"
    Hit the Start button at the top left of the workspace
    and then
    Wait for Queue Finished to be displayed in the progress bar at the bottom
    left of the workspace.
    The goal is to determine if you can work with this HandBrake export better than you can with the
    original Panasonic file.
    We will be watching for your results.
    Thank you.
    ATR

  • Iphone 4 Battery, Hardware problems? Please Help.

    When you turn my Iphone 4 on, it only gets to the loading part with the apple logo, then turns off and does it all over again. It also only does this if it's on charge, but it doesn't actually seem to be charging. Do i need to restore my phone? Please Help. Thanks

    This is one problem within the DirectX 9.0b:
    Please take a good look at this update for Microsoft DirectX v9.0b:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&DisplayLang=en
    Possible Issue Description:
    - TV-Tuner card cannot keep TV-Tuner settings in memory;
    - TV-Tuner card cannot be initialized in system after installing DirectX v9.0b;
    - TV-Tuner card cannot capture any picture;
    Official Microsoft Information:
    DirectX 9.0b was released on 7/23/03 to address the MIDI security issue identified in bulletin MS03-030. A small number of non-security fixes were also included in the release. One of these fixes caused several TV Tuner capture card/driver combinations using video formats other than NTSC (NTSC-J, PAL, SECAM) to no longer initialize correctly on Windows 2000, Windows XP, and Windows Server 2003. Symptoms include loss of capture functionality and potential inability to set/retain device capture settings. This hotfix, documented further in Knowledge Base article 825116, has been issued to correct the flaw.
    I believe that your SB card is sharing IRQs with your Firewire hardwares thus causing errors.

  • Toshiba P305 major hardware problems PLease help

    I have a satellite p305. The headphone jack stopped working and the touchpad and click buttons stopped working. I tried updating drivers but nothing changed. The other problem was whenever you had to programs open that produce sound (windows media player and a you tube video or similar) The audio came out staticky. This is not when trying to listen to both players at the same time, one is paused. But if you have both of them open one will be staticky. I tore the computer down to see if there was anything visually wrong with it at the headphone jack or where the click butons and touch pad plug in but found nothing. I put the motherboard back in and put it all back together and plugged it in and pressed the power button. The buttons light up and i think either the hard drive or fan spun but nothing else happened after that. Im thinking bad MOBO but i need some advise because this is a computer that i am working on for someone else and really dont want the whole you broke my computer game to be played.

    This is one problem within the DirectX 9.0b:
    Please take a good look at this update for Microsoft DirectX v9.0b:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=8dfd1b6d-e177-4a0e-91d0-b4310675b02b&DisplayLang=en
    Possible Issue Description:
    - TV-Tuner card cannot keep TV-Tuner settings in memory;
    - TV-Tuner card cannot be initialized in system after installing DirectX v9.0b;
    - TV-Tuner card cannot capture any picture;
    Official Microsoft Information:
    DirectX 9.0b was released on 7/23/03 to address the MIDI security issue identified in bulletin MS03-030. A small number of non-security fixes were also included in the release. One of these fixes caused several TV Tuner capture card/driver combinations using video formats other than NTSC (NTSC-J, PAL, SECAM) to no longer initialize correctly on Windows 2000, Windows XP, and Windows Server 2003. Symptoms include loss of capture functionality and potential inability to set/retain device capture settings. This hotfix, documented further in Knowledge Base article 825116, has been issued to correct the flaw.
    I believe that your SB card is sharing IRQs with your Firewire hardwares thus causing errors.

  • Is JVM shared accross Managed Server

    Hi Guys,
    I have a basic question wrt the JVM usage in weblogic cluster.
    I have have configured cluster environment in a single Weblogic Domain with 2 managed server in a single box.
    In such case will the 2 managed server share the same JVM or each managed server will have its own JVM?
    Regards
    Suresh.

    Hi Suresh,
    Every WLS Server is a Java Program .. and it runs on it's own JVM. Thats why we have an option to allocate different Heap and JVM Tunning settings for Separate WLS instances even if they are on the same Physical box or remote.
    But it doesn't mean that u need to install JDK two times in your Box for every Managed Server. Both the Managed Servers can use the same JAVA_HOME.
    Thanks
    Jay SenSharma
    http://weblogic-wonders.com/ (Wonders Are here)

Maybe you are looking for