TV Tuner with my Media Center is not schanning all chanels.

Had PC recently worked on to clear out virous. Afterwards, I can not receive all scanned TV chanels. I cannot pickup half of my HD chanels. This is not a cable or modem problem. Is there a driver or solfware change that could turnup my my tuner or trobleshoop this problem?

Sounds like Windows or WMC may be corrupted. I would try a System Restore to revert the system back to a previous date.
Also ensure the channel width in WMC is set to 7mhz, not 8mhz.
Also update the BIOS.
If that's no help, then back up your important data and run Recovery to reimage the HDD back to its factory state.
To run Recovery, turn on the notebook and hold the 0 (Zero) key down.
You should create Recovery Discs first, there should be an icon on the Desktop, or use the Toshiba Recovery Disc Creator from the Start Menu.
Now if it still doesn't work after a fresh Windows install, then there could be a hardware problem. In which case, you would need to send the notebook to a Toshiba Service Center.

Similar Messages

How can I use the FM tuner in Windows Media Center?

Hi everyone.
New to the threads.
Found this site while looking for answers to a problem I'm having. ?:|
I received my Toshiba Satellite computer as a Christmas gift. I noticed it has a cool FM tuner feature.
I also have been playing around with Windows Media Center.
However, I cannot figure out how to operate the FM tuner inside WMC....?
I added the NXP FM tuner program to the "extras" on WMC, but instead of opening up the tuner inside WMC it just opens the separate program.
Does anyone know how I can use the FM tuner (or a different one perhaps?) inside WMC?
Thank you! :)

Hello
I don't have any experience with this because my Satellite doesnt have FM Tuner but nice discussion about it you can find under
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=138027
If you will find final solution it will be nice if you can describe own experience with it. It can be useful for other people here.
Bye and good luck!

Networking the mini with a Media center PC

I have my Mini networked with a PC with Windows media center. I have not been apple to see recorded TV from the PC to the mini. Any ideas?
Mac Mini Duo Mac OS X (10.4.6) networked wit PC

yes, absolutely, for standard playback, the integrated chipset was good. the problem was XBMC doesn't seem to work well with the nouveau driver, even trying to browse menu's was super choppy, took like 10-20 seconds everytime you press down in a menu for example to see the selection change. i could have used nvidia's binary driver, but i've been using nouveau for so long now, and it actually makes my system feel like it has a quad core which the nvidia didn't at the time, maybe nvidia's drivers have improved since then? but at the same time, i'm glad i got the radeon, the XBMC performance is great, and the HDMI hookup for the tv is convienient as well. Also using the vga input on my TV, i kept having to adjust the screen position because its constant autoscan everytime the resolution changed did not get it right, with the hdmi its lined up perfect without having to mess with it. so i think the 50$ for the card and an hdmi cable was worth it
Last edited by ssl6 (2010-08-17 15:18:34)

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

I just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

i just bought a new laptop because my old one died. is there any way to sync my phone with the new machine and not lose all my data?

Copy everything from your backup copy of your old computer to your new one.
Then sync.

Lost of HP Digital TV Tuner signal, with Win Media Center, on a random weekly frequency

I have a HP Pavilion dv9500 Notebook, (ref : dv9649em - GY429EA#ABF - CNF73912X6 ) and use a HP Digital TV tuner
bought with an HP notebook Pavilion tx1000, it's an express card tuner format 34, used on the express card port 54 of the dv9500. The dv9500 run on Win vista premium family with pack 2. On a regular random frequency, around one time per week. I lost the TV tuner signal after the record of a program, when it try to record a new program, because window cannot load the driver, in the product manager, the port USB 2 Intel ICH8 EHC 2836 or 283A, have an error. I must uninstall the USB 2 drivers, reinstall it, and do all the reinstallation, of the tuner in the Window Media Center, which is not an automatic process, at the detection of the tuner, and which is a long and boring process. So I'm really fedup of this situation ? Is there someone who have a solution ? Don't you have a solution to solve this bug ?
Thank a lot, of your help.
Christ..

Is this assuming you've selected "antenna" and then "digital" when initialy setting up your tuner in WMC? So ... if you selected set-top box/cable and then went through the process you don't get local HD? And if you select Antenna -> Digital -> and manually input the frequency, then you get HD from your local cable? If so, then this is a pretty cool tip... Thanks!
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Problems w/ TV Tuner Card and Media Center

Hi all,
Just wondering if anyone else is having this problem:
I just installed the FX5200 TDR-128, with the TV@nywhere card, and the Media Center Deluxe II. I can't get the tv stations to work in MCD II. It works great with MSI PVS software that came with the TV Tuner card. When I go into the "Watch TV" menu of MCD II, it brings up the tv screen but it is all garbled or sometimes a blue screen. I changed all the settings to the appropriate formats and it even has the channels that were scanned in the MSIPVS program. Does anyone know what is causing the channels to not work in the Media Center Deluxe II? Also there is a switch on the VIVO connector that has two settings "Safe" and "Work" what does this switch do? I can't find anything on it in the manual that came with the video card.
P.S. The remote works great.
Motherboard:KT4V-L
CPU: AthlonXP 2400+
RAM: 512Meg DDR400
Video: FX5200 TDR-128
OS: WinXP

Check out the new release 3 upgrade here
It has solved almost all the problems described here. Just came out today too.

WIndows XP Media Center did not install totally

Hey guys and gals,
I had a new WinXP Media Center disc set to install into my Boot Camp. But, when installing into my new iMac flat screen all alum. computer, there is no way to eject the CD 'during' the installation of WinXP. Thus it only uses disc one for the install of XP.
One 'can' eject the CD by rebooting the computer (hold down the off switch in back) and when the screen color appears, hold down the left mouse click button. But, the Installation process 'restarts'. Thus getting 'disc two' to be installed isnt possible. (During the installation, Windows stops and says 'please install disc two and press enter when its ready, which you cannot do, so its stuck there. I finally found that hitting 'Escape' key 'continues' the process of loading WindowsXP).
So.. My question is, can Windows XP Media Center be loaded still? Or is it not possible.
By the way, I am loving this iMac. Never had one before. This is AWESOME!!! Very impressed with Leopard. Very impressed.
Bill

Hi Bill,
lionheart_001 wrote:
Hey Stefan,
I have already done alot of setting up of Windows XP. I didnt want to wipe it all out. Would I need to backup all my files in XP to do the OS repair?
So you already have a Windows XP on your Mac, right ?
To my knowledge the MCE version has no update mechanism included for such a scenario.
But I might be wrong.
What happens when you you run Windows and insert the MCE CD ?
Are you prompted with a possibility to update ?
If not, then my first assumption is correct and a complete reinstallation is your only choice.
Have a look at WinClone for a backup of your current XP installation.
Thats what I am afraid of.
Hope not...
Cheers,
Bill
Regards
Stefan

Media Center Pc not working

Hi ,
My media center pc hp model "m7552.de" not working not boot screen but only case, cpu, graphics card and fans working not doing beep signal ;
+ i'm tested another power supply on orginal (hp) mainboard (not working).
+ i'm tested another ram on orginal (hp) mainboard (not working).
+ i'm tested another pci express graphic cart not runing on orginal (hp) mainboard (not working).
+ I'm tested amd 4200 cpu on another board runing without problems .
- i cannot tested another on board ram's and tv cart .
i thing problem on mainboard ?
Which model mainboard should I buy to work with this model ?
i have Windows Xp Media Center Edition 2005 HP license key (On PC) ,
After changing the motherboard I do not want to get a new operation system license, for that is the suggestion?
www.limonforum.com

Where support ?
www.limonforum.com

Using the Apple Remote with Windows Media Center

Hello guys
First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
Thank you

I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b
and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
The Hauppage USB was a good choice because it serves Mac & Windows.
Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
Although this may not answer your question, it describes other options.

Problems with Elisa Media Center (images quality)

Hi
I decided to install Elisa Media Center on my laptop. Everything works just fine, but only images from photo gallery are very ugly (I mean ragged). Don't know why, but when I play slideshow all of my photos, all of them are really bad looking. Just look.
This is screenshot from Elisa:
And that's how this image looks in original format (quality):

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

How do you set up a TC as a media center and not a back up?

Hello,
I am new to Apple products. I have a 13" Macbook Air and a 1 TB TC. I plan on buying the Apple TV. I am trying to find out how I can use my already networked TC to be used as a media center (to store pictures, music, movies ETC) instead of only being used for the Time Machine to back up my Macbook. Any help would be greatly appriciated.
Thanks for reading and have a great day!!
Jason

Sorry Jason.. but this is not really possible.
TC is a dumb hard disk in a router.. designed for Time Machine and laptops as a network target for the backups.
It has minimal (to say the least) functionality.. ie file protocol for network.. AFP and SMB.. that is it.. sum total.
No media servers. no nothing.
And Apple TV is not really a media player.. it is a streamer.. it accepts a stream and displays it on a TV or through a hifi system. It is bound.. with bolts and shackles and chains to itunes. It can play itunes stuff from any computer running itunes.. TC cannot run itunes.. so as you can see.. it is merely a file store.
So here you have it.. TC.. computer.. ATV.
If you want to store itunes library on the TC you can but it is unwise.. without considering the following consequences.. it is slow to start up and fast to spin down.. making itunes have library location and streaming issues. More important in a way TC has no way to back itself up.. on the day the TC dies your iTunes library goes with it. Time Machine cannot backup network drives.. you will need to use a tool like CCC and then backup the files to an external drive plugged in where?? The MBA.. ?? In which case the whole thing is wrong way around.. put the library on the external drive and leave the TC to do what it does best.. act as a dumb backup target for TM.
Now that is in Apple world.. of course you can use a real player.. eg WD Live TV and play files from the TC.. all the smarts of course are in the WD player .. there are none in the TC.. it is simply used as SMB network drive.

Anyone using itunes with XP MEDIA CENTER?

I have had trouble installing itunes for DAYS! I kept getting the is not a win 32 app...did the troubleshooting but cant get the itunes uninstalled because it never got installed and cant find where to remove the set up. When I try to delete the TEMP folder it has two prgrams running with MEDIA CENTER that will not delete. I contacted apple and they said it is not compatible ith MEDIA CENTER EDITION...however, RADIO SHACK SWEARS it is. HELP!

Not to my knowledge. Media Center's music functions are essentially a wrapper around Windows Media Player - whatever you can play through WMP and add to its library is accessible through the Media Center UI. Unfortunately this does not include your AAC and M4P files. There are some freeware and commercial decoders out there that will enable AAC playback through WMP (www.rarewares.org/aac.html, www.3ivx.com), but for any protected files you're out of luck.
As for front-ending iTunes through Media Center, the HP interface you refer to is the only one I know of and frankly it's not very good. You might try The Green Button forums, a quick search turned up at least one likely thread.

Mega 865 TV-tuner (the "optional" MSi-tuner) problem, XP media center

I've built a MEGA 865 pro setup, with the optional TV-tuner from MSI.. And installed Windows XP Media Center edition. But the XP media-center doesn't recognize my tv-tuner. Doesn't it support it ?
And does anybody know if the Microsoft Media center keyboard will work with this computer ?

MediaPortal
a good free alternative, but if you have spent money on WinXP MCE, then better to spend a little more getting that working correctly
get a compatible TV tuner and the Microsoft MCE Remote & receiver, forget about InstantOn, and you'll have a nice HTPC system there#
Windows XP Media Center Edition FAQ

TV Tuner with my Media Center is not schanning all chanels.

Similar Messages

Maybe you are looking for