TV Tunner cable connector for Antenna

I recently received a Lenovo All-In-One PC model 3000 C315.  The Windows7 Device Manager shows "AverMedia A317 Mini-Card Hybrid Analog/ATSC" device.  The TV Tuner connector is not the normal coaxial f-type. It is smaller.  What type of cable connector fits this TV Tuner?  

I have exactly the same issue with my C315 computer.  No cable to attach to the proprietary input so I can hook up coax.  I have spent over 4 hours on the phone setting up a return and then ordering a replacement after being told I can not get the part separately.  Well the new C315 came with no cable and now my salesman is trying to hunt down the cable.  This is a problem with fulfillment on the Lenovo end.  If you see the review of the C315 on the PCMag website you can clearly see what the cable is supposed to look like.  If you see the review at Techspot in the comments section they mentioned their review unit did not come with a cable either, but they contacted Lenovo and was able to receive the cable.  I have attempted several times to get through their first line of defense on their call center and finally got to sales where they are attempting to find me the cable.  If they don't, I have no other choice than to return it.  Can not watch TV without that $5 cable (at most).  I am still being told that they do not ship the cable with the PC and you have to order it...problem is, no one can find the part number for the darn thing.  Very Frustrated.

Similar Messages

  • On my old macbook (osx 10.6.8), is there an easy way to clone my new SSD HD before installation?  I have the cable connector for the new SSD to the USB port

    My Macbook, 2007 vintage with osx 10.6.8 and an 80GB original HD is going to get a new brain....a 240 GB HD.  I have the USB cable to connect the new HD to the laptop before swap of the drives.  Is there an easy way to transfer the appropriate info from the old HD to the new SSD before the hardware swap?  Where is the procedure?.....I have a backup plan to use my external backup drive to do this but that would seem rather cumbersome.....Recommendations???

    Both of these applications can be used to create a clone.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html

  • Mini USB cable connector

    I do not have "Mini USB cable connector" for 6300 Nokia.
    Can I use the mini USB cable connector of my cammera for connecting my phone to PC?
    I can not find this cable for 6300 nokia phone in mobole phone stores in my country.
    Please advice me. Thanks

    Hi saeedebr
    It is certainly worth trying as most likely that it will work!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • What custom cable connector do I order for a DAQCard-6715?

    The 776832-01 ...
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/12803
    ... looks like the right connector for connecting to PCMCIA devices like the DAQCard 6715, but hopefully someone from NI can confirm this.
    Thanks In Advance - MJD

    Hello mdillon,
    I believe that the connector that you linked to is made for the larger
    sized 68-pin connectors on the PCI E series DAQ boards.  The
    PCMCIA and PCI M series boards have a smaller connector on them. 
    If you want to make a custom cable, you would first have to use the standard cable for the DAQCard 6715 as an adaptor for the 68-Pin Custome Cable Connector/Backshell Kit.
    Message Edited by E.Lee on 09-14-2005 02:57 PM
    Eric
    DE For Life!

  • Need mating connector for NB1 ribbon cable, can you help?

    I need a right angle board mount mating connector for NB1 ribbon cable I am using with PCI-6503 board.

    Hello bench �
    On the PCI-6503 product page, there is a link to purchase accessories for your product. If you still cannot find the connector, a National Instruments sales associate can be reached at (888) 280-7645.
    Have a great day!
    Becky B.
    Applications Engineer
    National Instruments
    Becky Linton
    National Instruments
    Field Engineer
    Office: 734-464-2463
    Cell: 248-709-2822
    Email: [email protected]

  • Connectors for cables

    Hi,
    I need to purchase connectors for the following cards/cables. What connectors do you recommend/ what company(vendor)/ what part number?
    1. PCI-6541 with SHC68-C68-D2 cable.
    2. PCI-6509 with SH100-100-F cabel.
    3. PCI-6289 with SHC68-68-EPM cable.
    Thanks a lot

    Hi intern,
    Let’s consolidate the same question to one main forum, here.
    David L.
    Systems Engineering
    National Instruments

  • ZIF connector for Keyboard ribbon cable.

    Anyone have success for locating replacement ZIF connectors for motherboard on dv8?

    HC-Thanks for the quick reply. Yes, while replacing the keyboard on this dv8 (fading keys), I broke the locking tab. Hopefully I've not jimmied the socket also. I'll take a look at the Ebay listings. Thanks again.
    HaggisCat wrote:
    I have run into this problem before with a number of members here and you will have to get a defective motherboard to salvage the locking tab, this is assuming the locking tab is the part that has broken or went missing.
     A "parts" HDX18 motherboard locking tab will work and it is more likely you will find one on ebay then one for a dv8.
     http://www.ebay.com/itm/519592-001-ASIS-HP-HDX-X18​-1200-Intel-Motherboard-/280704333027?pt=Motherboa​...
     http://www.ebay.com/itm/506495-001-ASIS-HP-HDX-X18​-1100-Intel-Motherboard-/280704333143?pt=Motherboa​...
     Contact the seller(s) and make sure the locking bar is still there.

  • Ipod cable/accessories for Zen sleek

    I don't know why Creative decide to use a new connection for Zen Sleek instead of the standard mini 5 pin USB2 connection.
    While looking for a new cable (and a compact car charger) for my new Zen Sleek, I noticed that the new Philips HD MP3 player and all Ipod seem to have the same kind connection.
    Have anyone attempted to use Ipod cable on Zen Sleek? It seems that most after market accessories are made for Ipod so it would be very very nice if Zen Sleek uses the same connection. Perhaps I am day dreaming.

    OK, don't get caught by this - there's a company that specializes in travel & replacement cables for cell phones, PDAs and MP3 players. Their name is Gomadic, and they have a very slick system - there's a standard USB male on one end and a receptacle like a mini-headphone receptacle on the other. You can get a very wide variety of end-connectors that plug into that receptacle and mate with just about anything you can think of. They claimed to have the connector for the Sleek, and I ordered it. However, when I got it, the end connector was a standard mini-USB male. I called them and they said "oops!" They just found out that Creative put this oddball connector on the Sleek while all the rest of Creative's players use the mini-USB. I can still use the thing for my camera and some other stuff though. They told me to keep it and gave me full credit on my credit card because of the error. So, I guess if you want a free travel connector for any of your kit that uses a mini-USB, order the cable for the Sleek from them before they correct their website!

  • C COMPAQ VGA CABLE CONNECTOR

    HI my mane is Lulama Mncube in South Africa (Pietermaritzburg). I accidentaly crushed the screen of my CQ58 COMPACQ note book some time ago and I managed to get it fixed. After not so long it came loose I took it back to the person who fixed it for me. he opened it now the screen does not come on anymore we tried new screen still but if you connect it to external screen it works. so now he is suspecting VGA CABLE CONNECTOR, but he can;t find one. please help where can I find one. 

    Hi @lulama ,
    Welcome to the HP Forums!
    It is a good  place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you accidentally crushed the display and had it repaired, Not long after the screen became loose and you took it back to the repair person and when he opens the notebook the display is blank. If you connect an external monitor it works.  He thinks it may be the connecting cable but does not know where to locate it.
    If you check the maintenance and service guide ( under the user guide) there is usually instructions and diagrams to assist.   Here is a link to HP Troubleshooting Input your model number and follow the on screen prompts.
    How Do I Find My Model Number or Product Number?
    When you have the main page open click on User guides and you should see an option for the maintenance and service guide for your notebook if one is available.
    Here is a link to Monitor is Blank that may also be of aid.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Connect HP Docking Stn to Macbook with Expansion Cable Connector?

    Hello
    I have an HP xB4 docking station with an Expansion Cable Connector. I have a macbook pro which doesn't have a slot that the docking station cord fits into. Does anyone know if there is a converter or something that I could use so I can use the dock?
    Thankyou for any info...

    No. It would be pointless for anyone to make an adapter for the cable. The adapter would have to connect separately to every port on the MBP, and combine all of those cables into one connector that the docking station would plug into. No one would want to make all those connections every time they came home with their notebook computer and sat down to use it. If one were going to do that, why not just plug the peripherals themselves into the computer and save $250?
    HP evidently provides a unique proprietary port on its notebooks for the docking station to connect to. That's a very nice feature for the few users who will ever buy docking stations, but for everyone else it just adds cost, size, weight, and one more thing that can break or be damaged.

  • I have done the softer update and now this system request a connection with a meanie HD and I connector for iTunes I don't understand why ?

    I have done the softer update and now this system request a connection with a Mini  HDMI  connector for iTunes I don't understand why ?
    DO I HAVE TO HAVE THE MINI HDMI CONNECTOR TO COMPLETE THE SOFTER UPDATE PROCESS ?

    You might be seeing a Micro USB cable (Not HDMI) that is because your Apple Tv is in Recovery Mode due to some reason and it needs to be Restored by connecting it to iTunes on your Computer. So if you have a Micro USB cable ( which comes with Android Smart Phones ) then try to connect your Apple Tv to your computer using the same and with the help of iTunes Restore your Apple Tv to Factory Settings. Go through the below Apple Support kb which says " If your Apple TV still does not respond or if you were unable to follow the above steps "
    http://support.apple.com/kb/ht4367

  • True 7.1 audio cable setup for audigy 2

    just got the ZS and the Creative Inspire P7800 7. speaker set, and it comes with a 4 to 3 cable connector - 3 cables to the sound card and 4 to the sub. I read that I'm missing a connection to the sound card for a true 7. audio setup, but not sure if my card accepts 4 connections. People said they could just buy an extra audio cable for non-creative sound cards with the extra port for that 4th cable, but how bout for the ZA?

    Everything's working fine and I've followed the manuals - I just want to know how to plug in that 4th connector to the sound card to get that "true 7. configuration" I've read about. Some people would unplug the gray wire from the sub, get a new audio cable, and connect the sub and a (non-creative) soundcard that has the additional output (a line 4 out I believe, while the audigy has 3).

  • Dv6-LT069av has a input connector for mic or other input devices, to connect a LP player

    Pavillion dv6 has an input connector for mic or other input devices next to headphones connector on left side, to connect a LP player or other device thru the mic connector, what kind of cable is required? I used an RCA to male cord but no input on the notebook. And how to make it record from that mic input connector? Any settings need to be changed in Win7 to make it work? Thanks in advance.

    Get one of these ...
    http://www.amazon.com/Audiovox-Corporation-CRF907-​RCA-Modulator/dp/B0014KKV7W/ref=dp_cp_ob_e_title_0 
    Connect the RF (Coax) output of the STB to the Coax-in on the modulator
    Connect the Coax-out on the modulator to the TV
    Connect the Video-out and Audio-out RCA jacks on the DVD/VCR to the Video-in and Audio-in on the modulator.
    The STB signal will flow thru the modulator and allow you to watch TV as normal.
    When you turn the DVD/VCR on, the modulator will sense the signal coming from the device and override the signal and inject it onto the coax (converting it to RF first) so that it shows up on the TV instead of the STB output.   When you're done and turn the DVD/VCR off, the signal from the STB will automatically return to the TV.

  • New MAcbook Pro i5 Video cable connector was bornt

    I bought it for a month then my display was so dark after I brought it to the service center the technician said my Video cable connector from mother board to Display was burnt. What's happened? Hello!! I just bought it only a month. I called to regional service center at Singapore they only said I'm so sorry we unable to replacement for your machine only repair is acceptional for this case. What will you do next if the same problem happened again? Investigate and fix it again and again. What the hec is that? Pay more for less services and low Qualities of product?

    Apple does not read posts in these user-to-user forums, so you are not talking to Apple here.
    It's 100% normal for Apple to repair rather than replace a month-old machine that has malfunctioned. Have it repaired. If the same problem recurs, have it repaired again, and have Apple examine your video adapter. It may be causing the problem, particularly if it's a cheap third-party adapter.

  • Cannot find the Power Led connector for JFP1 to connect on K8N Neo FSR

    Hi,
    I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
    I can't even get a start: if I click on "Power" I just get a red light under the Power button for 1 second and nothing start.
    This may be related with the fact that I did not find a "Power LED" connector for JFP1 (I have connected all the others connectors, including the Power LED one for JFP2).
    Thank you in advance for your help.
    Precisions:
    At the beginning, I had forgotten to connect the ATX 12V power connector on JPW1.
    After having done that without getting an improvement, I did a Clear CMOS (after having unplug the power cable).
    Now the CPU fan begins to turn just when I switch the power on from back of the case (and not from the power button) and stops turning after five seconds.
    Sometimes, I get an orange light during 1/2 second on the D-bracket LEDs.

    Quote from: Dr Stu on 20-November-05, 04:36:29
    evidently if he fixed it, the solution was posted elsewhere
    so what have you tried so far? has this system ever worked?
    post your PSU specs. try powering up board outside the case in case there is a short somewhere
    I have tried a different power unit, different JFP1 configerations, removing and replacing MB battery, changing the jumper settings on JBAT1 to clear CMOS.
    Everything is just dead, no power anywhere. I get the fan light inside the Power unit to light up for 1 second when i connect the power cable and thats it. Its a 450 Watt power unit so it should be plenty. Maybe i will try removing the board and starting it that way.
    This system has never worked, i just built it.

Maybe you are looking for