TV video sync???

I have a couple of episodes of a tv show that I purchased from iTunes. They are in the TV library, checked off, but don't sync to my new ipod 8G nano. What am I missing here?
Thanks,
Rita

Now I'm getting somewhere! Sync settings? I don't know what they are or how to find out. What shall I do?
Thanks,
Rita

Similar Messages

  • 'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

    I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8.  [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems: 
    First, after importing the file (.avi), I get a message about ‘dropped frames.’ 
    Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ]   I can use the shift-arrow key and see that the video is there.
    Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer.  There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux). 
    Questions:
    1.  Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

    "I think you're telling me you're using a backwards compatible Digital8  camcorder to capture your video as DV-AVIs. Is that right?" YES
    "Are you using  Premiere Elements to do this capturing?" YES, AS ABOVE PE8
    "Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
    WMP v12 is dumb. Under properties, media, it says 'video.'  However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
    So, back to the Questions:
    1.  Why doesn’t the source  monitor play the video? Is this a problem with PE8 (latest update as of 3  March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

  • Audio/Video sync drift in Premiere CS5.5, but not in CS6

    I have a QuickTime file with the following specs:
    Video: H.264, 854x480, 29.99fps
    Audio: AAC, 44100 Hz
    When I open the file in QT player, or in Adobe Premiere CS6, there is no issue with Audio/Video sync.
    However, when I import the file in Premiere CS 5.5, there is a drift in the Audio/Video sync.
    Is there something I can do in Premiere CS 5.5 to avoid or fix the drift?
    Thanks.

    I had a similar problem and these are the steps I took to fix it.
    First I deleted the files in "Adobe Premiere Pro Preview Files" for the project in question. I reopened Premiere and it appeared that deleting those files didn't seem to do anything as everything in the project looked the same.
    I then disconnected the drive with the footage on it and opened Premiere. When it asked where the footage was, I told it to Offline All. I then went into Preferences > Media and hit Clean for the Media Cache Database. This had to be done because it only cleans the cache for files that are no longer connected with the project (as noted above). I closed and reopened the project, selected everything in the Project window, right clicked and chose Relink Media. I located one file and it relinked the rest automatically.
    Now, finally, Premiere is re-conforming all the audio. Hooray!

  • Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1) Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. Any ideas ???

    Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1).  Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. NO ERROR MESSAGE THOUGH. Just a No Content in the Music App in the iPhone. Any ideas ???

    Bump!

  • HT1386 I have Mac itunes and a touch 2G.  My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes.  The music and videos sync, but apps & podcast will not. All checked to syn

    I have Mac itunes and a touch 2G.  My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes.  The music and videos sync to the 4G, but apps & podcast will not. All are checked to sync.  During sync, it gets to "determining apps to sync"  then immediately goes to "finished syncing".   No apps or podcasts from my Mac itunes are on the touch 4G.

    You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
    It appears that you are trying to sync with a different library.
    - If you want to make the Mac you syncing computer:
    --- Connect the iPod to the computer and make a backup by:
    iOS: How to back up
    --- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

  • Old IMac 17'' video sync problem at boot

    Hi,
    A friend has brought his IMac 17'', which has a video sync problem. At boot, all screen lines are out of sync, but I can more or less recognize the apple logo, which disappears later. Something happens at least, there is a boot processing going on I think.
    I tried to reset the parameter ram, it does not help.
    I have heard of a power supply problem that can cause that problem. Is that right? The computer serial is: W8446APAPP7.
    Can anyone help?
    Thanks!
    Philippe

    Here's a simple test case I've made, it's just a bunch of lines drawn in an orthographic OpenGL view. When you scroll horizontially with scrollbars or by space+dragging, the effect is very noticeble.
    The .app and source are available here:
    http://www.johnpsimons.com/mac/TestApp.tgz
    http://www.johnpsimons.com/mac/TestSource.tgz
    I believe this is the same problem as with the Apple homepage Flash thing. It's not just a problem with Flash.

  • Does anyone know if the IPOD Nano touch 6th Generation have videos+syncing?

    Hey guys my dad is gonna go to Dubai to get me an IPOD, and i need to tell him weather to get a 8gb or a 16gb, so if anyone knows if it has videos to preview.
    Plus i need DETAILED STEPS on how to sync music-photos-podcasts etc. to the IPOD Nano Touch 6th generation. Please help me
    Thank you

    Hello Battouty,
    And welcome to Apple Discussions!
    Does anyone know if the IPOD Nano touch 6th Generation have videos+syncing?
    No, you cannot sync videos to the 6G Nano.
    For help on syncing all other types of content, see the iPod's *User Guide*. It should be able to answer most of your questions.
    http://discussions.apple.com/category.jspa?categoryID=273
    B-rock

  • "Manually Manage Videos" & "Sync Tones" at the same time?

    So, I wan't to sync my ring and text tones manually to my iPad from iTunes as I have some tones that I did not buy from iTunes. I also want to "manually manage videos" synced to my iPad. However, it seems that iTunes will NOT let me choose both at the same time. Am I missing something? Why can't you do both at the same time? Are tones considered video (they have a .m4r extension)?
    Thanks in advance.

    While I appreciate the link, it doesn't exactly explain why you can't automatically sync Tones while manually managing videos. When you connect an iOS device (that also has iTunes Match enabled) to iTunes 11, the "Manually Manage..." checkbox does not say music as well. It only allows you to "Manually Manage Video", since music is syncing over the cloud via iTunes Match. Thusly, this link does not take into account iTunes Match.
    For whatever reason, iTunes must see Tones as part of video, I guess.
    But thanks anyways.
    Message was edited by: pmpknetr21

  • Video Sync Problems in iTunes 11.1/ios 7

    I have recently upgraded to ios 7 for my iPad and iPhone, and iTunes 11.1.  I added two new videos to iTunes (.m4v format) and now when I try to sync with my iPad it seems to hang forever on "Waiting for changes to be applied" and then gives me an error message that the videos are not of a format that can be played on the iPad.  This is odd since I already have .m4v videos on my iPad that play just fine.  Moreover, I deselected some videos and they do not delete from my iPad as well.  Is anyone else encountering this?  I have seen some posting regarding music files and playlists not syncing, but nothing about movie files.

    I've had video syncing problems (not with music though) when I updated my iPhone 4s to the new IOS 7, but I finally figured it out. What I did was I plugged my 4s in to my computer (Windows 7, 64-bit), then opened iTune (11.1.3.8), clicked on my iPhone tab on the upper right, under "Summary" put a 'check' in the Manually sync music & videos.
    Looking at the picture above, notice the: Movies, Music Videos, and  Home Videos; are now available. Before this method, these three wasn't there. These are all in the original Videos app for the iPhone. I hope this help you guys too.

  • Regular problem with video playback & audio video sync

    So, I am regularly having two problems (I wonder whether they are connected) that I cannot solve and am hoping someone can tell me if I am out of luck or if I need to do something or add something.
    For example, because it happened again today. These are details about the file stuff:
    Type:AVI
    Bit Rate:133kbps
    Dimensions:624x352
    Audio format: LameMP3
    Frame rate: 23 frames/second
    Data Rate: 1131 kbps
    Video Sample Size: 12 bit
    Video Compression: XVID
    First Problem: If I play the file - I use Media Player Classic - it plays fine. Open it in Windows Media Player and it plays fine. Try to edit it in Premiere and the file loaded into Premiere is filled with what I believe are called audio video sync problems, so I have to constantly unlink audio and video and adjust it. It loads and does not need to conform.
    I have the same problem on my laptop(Windows XP Home) and desktop (XP Pro), the desktop with twice the RAM. I have the K-lite Mega codec pack installed. I would call myself a beginner when it comes to video editing. I understand generally what codecs are but I am not capable to making any tweaks to the K-lite Mega codec pack (if I should have) so it is setup as installed.
    Second Problem: The video in the playback box never plays back normally. I have tried adjusting the playback settings: have changed the aspect ratio between the software and harware option and adjusted between the three desktop display options. Occasionally it is "ok" but most of the time not and never just normal.
    Any help is much appreciated.
    Thank you.

    I tried this already and then we had a blackout so going to try again and hope it goes through before a second one...lol
    Hello:
    Thank you Robert J. Johnston, the_wine_snob, Paul_LS and SteveGrisetti for your help so far.
    So this is where I am at now:
    Files all seem to be of the same type, so I will just say "the file" for the one I am working with right now.
    Loaded file into VirtualDub.  I like that program.  Well done, whoever made it.  Did some basic cutting of unwanted stuff.  Saved as AVI.  Saved both a Direct Stream Copy and a Full Processing Copy.
    Opened the FP copy in Premiere Elements and it plays without audio sync problems that I can see. Have edited it some so far and still no problems.
    Before I do any more editing work, I decided to save it (SHARE) in different formats to see what happens.
    Goal: Looking for no audio sync problems.  Best quality I can get with a 1GB file size limit.
    Saved as DV-AVI:  plays fine.  no audio sync probelms.  love the video quality.  2.95GB, so too big
    Saved as Flash:  Do not see any audio sync problems.  Do NOT like the quality (flips back and forth between clear and all pixely (is that a word).  32 MG
    Saved as Mpeg: Media Player won't play it (thought Media Player with KL Mega Codec played everything?) (It loads it but doesn't play?); Quicktime won't play it.  Windows Media Player just did.  Do not see any audio sync problems.  Like the video quality. 631 MB.
    Saved as Windows Media: Do not "think" there are any audio sync problems; if there are, they are very subtle.  Not crazy about video quality.  Better than flash video option though still flickers between two types of qaulity (if that makes sense) . 52MB
    Any suggestions as to what I should do at this point to meet my stated goal.  I assume [share]ing is what I should do?  Is there any exporting or any other options I do not know about.  Without your help I figure I will Share to MPEG?  Not sure why Media Player won't play it and Windows Media Player will?
    Any thoughts on the best choice for me?  Thanks for your help.

  • Video sync problem in vista premium 32bit even after enabling all movies

    video sync problem in vista premium 32bit even after enabling all movies and or movies.the vids are in itunes and ive tried to sync again and again.with no luck .
    and i cant seem to find a related or symular problem. has anyone else had this problem?

    cbeer77 wrote:
    Not sure how to find out the GPU acceleration
    Edit > Preferences > General
    If GPU acceleration is checked, uncheck it and see if that helps.
    Also:
    Could you give us a Mediainfo or Gspot screen shot of what's in the AVI wrapper?
    Please  answer Richard's question.

  • Premiere pro cs5 : audio and video sync issue with .aiff file format

    I am using premiere pro cs5 on MAC and facing issue with audio and video sync  using .AIFF file format for audio unable to make it work.
    Is there any solution to this issue or any work around?
    Thanks in advance.
    Vinay

    Hi,
    hmmm, well that settles that...
    Here's a link to info about an open source free program to convert....for mac
    http://www.ehow.com/how_5072563_convert-files-wav-files-freeware.html
    Good luck
    Rod

  • Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes?

    Why won't some photos or videos sync to my iPad when they work fine with iPhoto and iTunes? Other photos taken with same camera sync fine from iPhoto while certain events are inexplicably incompatible. I've recently foundvthecsame occurrence with certain mp3s and videos from iTunes.

    For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
    Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
    The iPad's supported audio formats are :
    HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

  • Having trouble Audio and Video Syncing on iTune

    Having trouble Audio and Video Syncing on iTune anyone know how to repair?

    Here are two suggestions:
    If everything is pretty much in sync until 17 minutes in, do a re sync every ten minutes.  This should ensure that, even if the sync drifts by a few frames over 10 mins, the video will not seem distinctly out of sync at any time.
    Another approach would be to do an overall re-sync in QuickTime Pro (which I believe is part of the FCP package).
    You would need to use QTPro to trim,the video file to remove any surplus seconds of material at the beginning and end.  Then open the audio file in QT Pro and trim that if necessary.  It may be a slightly more complicated to do this at the beginning because, if the audio does not come in immediately, you'll need to make sure that you have the right amount of silence at the start of the file to match the video before the audio begins. This should leave you with video and audio files of the same length.
    Then, in the drop menus of your QT, select and copy the audio track.  Switching to the QT video file, in the drop down menus, click on add track. 
    Hope one or other of these May be some help to you.

  • Why Wont Apple Fix AUDIO / VIDEO Sync Issues

    This has been a problem for awhile. Thank god there is a application fix but im receiving an iTouch very soon and I'm not sure if the same problem is going to be on that to..
    It might be how Quicktime reads .MP4 and .M4V Files but i can play the videos on VLC and Zune Software fine..
    I see other people posting this exact same problems. I see no answers... Apple Knows this is an issue. Why wont they fix it.
    From what im hearing it is the audio that is going out of sync from the video.
    Now my Final Question is
    "Is this just a Software issue for the computers or is it also a Software issue (Assuming that quicktime is the software on these devices) for the iTouch / iPhone ?

    well i got my itouch today and it seems that the audio and video sync issues are only on the computer distributions of quicktime and not the hand held device versions

  • Audio/Video sync program for Power PC G5

    Greetings to ALL,  I am attempting to determine if there is a audio/video sync program for my PPC G5 running 10.5.8?
    Suggestions would be great because if I cannot locate a program I am at the end of the road for this little project.
    Working with a Nikon D7000 and RODE Pro Mic and looking to get the Tascam DR 100MkII recorder if I can figure out how to get things to jell.
    Thank You, pc

    Even if syncing directly is not practical, iTunes can manage audio files, has many organization features for audio, such as playlists and folders of playlist, and tags that can be applied to multiple audio and video files are supported by it.   MPEG4Streamclip offfers a variety of conversion tools that are available for PowerPC for video and will bring videos to work with iTunes.  H.264 MPEG4s are the best for iTunes.
    And http://www.lemkesoft.com/ GraphicConverter lets you browse Finder folders, which you can tag by month, and year, and even time, in a hierarchy that makes sure you don't do any duplication.   Since the Nikon D7000 does write to standard SD cards, you just need a Mac OS X 10.5 supporting SD card reader.  Many SansDisk readers supports it.

Maybe you are looking for

  • I'm having trouble with the sync all feature and i'm not sure what to do about it

    i'm using Lr 5.3 on a windows 8.1 and a really fast laptop "can render movies in after effect in minutes" the problem i'm having is when i click the sync all button and the top loading bar moves like everybody, only the pictures viewed in my bottom s

  • Moving PC Quicken data to my Mac - Lion

    I'm new to Macs and want to transfer my PC Quicken data to my new Mac running Lion.  Does this $15 verion of Quicken run as it claims on Lion - I assume that it is only $15 to get the product out there? I downloaded Essentials a month ago and dumped

  • ..gnome doesn't start after first screen [SOLVED]

    Good morning to everybody. Yesterday night I have solved the problem: I don't know which is the resolution among the following, but gnome today starts also if a lvm gives me an error at the prompt: 1. I have changed inittab adding x:5:once/opt/.....g

  • Essbase 11.1.1.1.3 Server install - Unable to create application

    Hello, I did a full install of this version. After working through the config for Shared Services using SQL Server, I installed the package in "Essbase standalone mode" which is really all I need. I have encountered a couple of problems trying to get

  • Serial number during installation

    Please I need help! The software installation for my mydaq isn't accepting my serial number, it always saying "AA####### does not apply to any National Instruments products." I called mydaq costomer service number and they said the serial number is v