Tv wont turn on power light binks 2 times

I have a kdl-46nx800 .  It shut off one day now blinks 2 times for a code that sony says is a power problem. Help please. I tried unplugging everything and plugged it into a new outlet same thing. Anything else i can try at home???

Hi kels_pierce, and welcome to the HP Forums! 
I am sorry to hear that your computer shut down on you and now it will not boot up for you. I will try my best to help you resolve this issue. To better assist you, could you please tell me the model number of your computer and the operating system you are running on it. Here are some guides in case you need them.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
I am also including this document for Computer Does Not Start and the LEDs Blink or the Computer Beeps that may help resolve your issue.
I hope this helps,
I worked on behalf of HP.

Similar Messages

  • G5 dual 2.0 dead? Power light flashed three times...

    G5 dual 2.0 powers up, but won't boot. I'm aware the power light blinking three times every few seconds indicates faulty RAM, but I removed all sticks and tried them out a pair at a time to weed something out. No luck. I also put in a new battery and reset the PMU (or SMU, whatever it's called - the button on the logic board.).
    Any suggestions?
    Thanks.

    I've just had my computer have the same problem with a faulty logic board being the problem. The local Apple tech said we had to get a service number from Apple to get it fixed. The Apple person (in the Philippines) gave us a number and said go back to our local Apple tech to have him access a repair extension program for the repairs. Are we being given the run-around because the local guy says he doesn't know about this program????

  • Mac Mini, Turn off Power Light

    Hi
    I just wondered how you can disable or turn off the power light on my computer while using it.
    Thanks

    Tape it over? I'm sure you'll find some cute little sticker to put over it. Is the LED annoying you?
    Cheers
    Steffen.

  • Powe Mac G5 early 2004 gives error (no memory installed) Do I need to replace the Logic Board. Machine powers up,2beeps and power lights blinks 2 times and stops there, No video or any thing?

    I just recently aquired a Power Mac G5 early 2004.
    When I power the system up. I get 2 beeps
    and the small front panel light blinks 2 times continuously.
    The error codes show that it means a memory problem or
    no memory present. Memory is installed.
    In this case do I need to replace the mother board.
    The system goes no futher, no video or any thing.

    Well, it's possible that someone pulled the original RAM from the computer before they sold it, and repalced it with incompatible RAM. That, believe it of not, would be the best of all world in this case, as a working G5 logic board and its installation could cost as much as a refurbed Intel mac.
    I would contact the seller if you did not personally see the computer working before you bought it.
    As the computer had to be moved about--possibly shipped--to change hands, first check that all internal cards and RAM Modules are fully seated. They can work loose in some models.

  • Won't Start Up........Power LIght Blinks 3 Times

    My G5 dual 1.8ghz has failed on me. Yesterday it would not start and the power light was pulsing 3 flashes repeatedly. I tried to start in target mode - nothing. Removed the DIMMs to check for faulty DIMMs - nothing. Managed to instal an installer disk - nothing. Eventually, zapped the PRAM and it started. However, this morning it is dead again and will not start. Zapping the PRAM makes no difference.
    I have tried removing USB devices - nothing.
    Any ideas?

    Hi-
    Sounds like a typical failure of the solder around the RAM slots.
    To test for this, use a hairdryer to heat the logic board around the RAM slots.
    Make the board very warm, then try and boot.
    If the machine boots, leave it on, as when the machine cools, the connections will be lost again.
    What this shows, if successful, is that the expansion due to heat is able to "revive" the connections at the solder points.
    The fix for this problem, unfortunately, is a replacement logic board, or, to have the board reflowed.
    A company in Germany does this:
    www.golytronic.de
    Related discussion:
    http://discussions.apple.com/thread.jspa?messageID=11004168&#11004168
    http://discussions.apple.com/thread.jspa?messageID=11050184&#11050184
    http://discussions.apple.com/thread.jspa?messageID=11294720&#11294720

  • HP 655 won't turn on, power light on and won't turn off.

    My HP 655 laptop has apparently gone into sleep mode, permanently. It was up, went into sleep mode and now it will not come back up. I have removed the battery and unplugged the power source for an hour. As soon as I plug in the power or battery, the power button lights up but the laptop will not turn on, no matter how long I hold the power button down. I even plugged in the HDMI cord to make sure that it wasn't the screen, obviously,  which it wasn't. 

    Hello  ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, try performing a hard reset. Lots of information in this document that could help.When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Here is a link to computer won't start for Windows 7. Windows 8 here.
    Here is a Youtube video that might help. It shows you how to reseat the HDD, which sometimes helps.
    Thanks.

  • G61-327CL wont boot; Flashing power lights

    A friend gave me his old laptop because it didn't work. HP G61-327CL. When you try to turn it on, the power/charge/dvd lights at the bottom left just flash 3 times. The middle (charge) light seems to be brighter than the other 2, so it's possible that's actually the only one flashing, but I have no clue. The charging light comes on when it's plugged in. I've tried a hard reset, after which it gives four flashing lights, the last one being held for a second.
    Any help would be appreciated!  

    Hey Tyeillin,
    Going by what you said, it seems like there is a graphics card issue with that notebook. Take a look at this document for info: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&destPage=document&lc=en&tmp_docn...
    If that matches up with what you are seeing, then the unit will need repair - either a new system board and/or graphics card.
    I am an HP employee.
    • Say thanks by clicking the 'Thumbs Up' button on the left
    • Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

  • My appletv wont turn on (the light) and I only purchased it in the last six months. what's the go??

    the light was coming on this morning and now it's not, is this just a 'resetting' issue or a common problem? I just can't believe it's not very old and this is happening.

    So you have no signal on the TV?
    Could be something simple like a fuse in the power lead.  If you have another similar one try that.
    Device failure after such a short usage is not common but not impossible and some will - if only 6 months old it will be under warranty (and the remote).
    If you have a micro USB lead then you could hook it up to a computer running iTunes as described here to see if the software is corrupted and it will restore:
    http://support.apple.com/kb/HT4367

  • Wd my book 500gb studio edition wont turn on, white light half lit

    Hi,
    I have a Western Digital My Book 500GB Firewire/eSATA/USB 2 Studio Edition external hard drive that i bought 2-3 years ago. I've backed up a lot of data then and after that not used it at all until recently. I can't seem to get it to mount under Lion, as soon as I plug in the power lead the white bar of light at the front of the drive lights up but only the top half of it, there are no noises and plugging in a USB lead does not show the drive on my iMac.
    Can anyone advise please, there's tons of data and I have only used the drive literally a few times. I just checked and my limited warranty expired six months ago so I can't ask WD to help.
    Any help is greatly appreciated.
    Thanks.

    To give the conclusion in case anyone googles to here. I had to pry open the original WD enclosure and get the hard drive out. It's a big, cheap, plastic box made to resemble Apple's shade of silver, thus giving false confidence in quality of build which is atrocious.
    The hard drive itself is perfectly fine, all the data is intact and transfer is at full speed. I had to get an external SATA to USB adapter and connect it to my iMac via a USB port. From there Lion treats it as any other external hdd.

  • Z2 wont turn on red light

    my xperia z2 abruptly turned off while there was 10% battery was remaning since then i tried every thing pressed all three buttons together power volume and tried that red button on the side of sim tray nothing is working out this is very worrying moment for me plz some help

    You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Toshiba 32LV67 tv dvd combo wont turn on/Disc light blinks repeatedly

    I have the 32LV67 dvd combo and the disc light just keeps blinking when i plug it in. i read somewhere that you can re-install the firmware but i cant find it anywhere. Please help me!

    There is no firmware downloads for that model.
    Try leaving it unplugged from power overnight. If the problem persists, it may require servicing.
    - Peter

  • PS4 Console wont turn on ( No light or anything else)

    My PS4 i have had for under forty days has stopped working, i try to turn it on by pressing the power button but i doesnt work and i have also tried to turn it on using the controller but still nothing. Recently i took off the cords and opened the PS4 to see if that would help, still nothing. This has happened before numerous times but when it did all i did was put the power plug out and then back in AND boom it was working, but now this time i tried that but it didnt work. help please. 

    Check the fuse in the plug  Opening the console when it's only 40 days old has invalidated any warranty so you can't even take it back to the store for an exchange

  • Digital clock timer to turn on/off lights at certain times

    Hello i am an undergraduate student curently doing a project.
    I am making a automated plant growing system.
    i need help in creating a VI that can use a digital clock to input a time for grow lights and a water pump to turn on and off.
    Il will be using GPIB power supplies to power both.

    Hi,
    Graham is currently out of the office, so I am taking over dealing with this support request.
    I have attached a VI which shows an example of how to read the current time from the Time Stamp, and then specify a Start and End Time for the lights in your system to turn on. The example currently just activates an LED on the Front Panel, but you should be able to easily change this to an operation that sends the different string commands you require to your power supply for the lights and the water pump to turn them on and off respectively.
    Regards,
    Dan
    Attachments:
    Lights Controller.vi ‏16 KB

  • My iphone screen wont turn on after being replaced 3 times and all ribbons are connected properly

    hello ,
    i bought a iphone 3gs off my friend only to find multiple problems with the phone !!
    i had to change the audio jack replace all buttons , replace the digitilizer and home button .
    i did this all with no problems , the only problem i could not fix was the screen keep going blank while using the phone .
    i replaced the screen and the problem still persisted , so im pretty sure there is a lose connection some where ,
    i had a further look into the problem today only to find that when my friend previously changed the screen he has damaged the logic board where the lcd is connected which is undoubtably the reason for a lose connection .
    how do i go about replacing the broken part ? or have i been bumped off and now have to replace the whole logic board ?
    many thanks

    Try unplugging from the computer then pressing and holding the home button, while pressing home button plug it back into the computer and hold until an itunes symbol shows up. If after 60 seconds it doesn't show up try taking into an Apple store for replacement. If it does show up look in itunes and restore iphone.

  • My ipod wont turn on i already read about holding the power button and the home button the only thing is my home button is not working so what can i do

    my ipod wont turn on, its a ipod 5th gen- I turned off my ipod and then when I went to check it later it wont turn on this is the second time it happened, I tried to charge it its not recognizing it, I have heard that you can try to press the power button and the homebutton to make it work, when it happened the first time I did that and it worked but since my home button isn't working what can I do, can I try to fix it or do I have to go to apple and ask, can anyone help me plz

    Hello, pravin729.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPod touch will not turn on.  I would start with going through the troubleshooting steps in the article below.    
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    http://support.apple.com/en-us/HT201412
    Cheers,
    Jason H.

Maybe you are looking for