Tvanywhere and Mega 865, install MSIPVS fails ..

Was unable to find a local source for the add in tv card for my MSI MEGA 865 and decided to use the TV anywhere card. I was also interested in the NTSC and PAL support. Everything went well until i tried to install the MSIPVS Software. The drivers installed properly in step one, but in step 2 installing the MSIPVS software i received a "Setup failed to run installation: The remote procedure call failed". I uninstalled the MEDIA Center Deluxe III program and removed all software except INCD. I am running windows XP, 512 mb memory, 3ghz intel processor. I removed the software and hardware and tried to reinstall several times, it made no difference and it failed in the same place.

see threads in the Mega PC forum
Windows XP has installed itself to the E: or F: drive because the card reader has taken C: and D: and in this case Intervideo software won't install correctly
you're gonna have to disable the built in card reader (either unplug from inside, or disable USB controller in BIOS) format your hdd and reinstall windows to C: partition - not sure if Repair would fix it
this happened to me the first time i built my mega 651 and it was SO frustrating, especially as everything else worked fine

Similar Messages

Pagemaker 7.0.1 stopped working. I cannot uninstall and any re-install attempt fails

Windows 8.01
My Pagemaker 7.0.1 stopped working. When I attempt to re install it it first tells me that the uninstall app will bot load and after it finishes, the program stops as soon as I open it. This is a fully licensed version.

Pagemaker does not work on windows 8. Some people have claimed to get it to work on win 7-8, but not consistently, and no one has demonstrated a reliable setup that is able to repeatedly output pdf files.
You need an old windows Xp machine to run Pagemaker. Other alternatives are Indesign, which expensive and complicated, but worth it if you do a lot of page layout. Serif pageplus is a fairly cheap alternative, or Scribus wich is a free alternative.
Jay

Things to know before (and after) building a Mega 865

As I am seeing a lot of the same questions regarding the Mega 865 I created this document,
29-Oct-2004 Added Northwood benefits
29-Oct-2004 Emphasized NOT to use live update for bios update
Processors in general
Start with the processor, I would say get something around 3 gighz (give or take) which is quite affordeble. If you are going for a prescott, make sure you upgrade your bios to 1.3 (see below).It will run a bit hot (understatement) otherwise.
If going for northwood any version is ok I believe. When I chose mine I let $$$ descide, and the prescott was on sale. (If I would buy a CPU for the Mega again, I would most likely go for a Northwood this time). Before buying your processor make sure your processor is supported, you can find the supported processors here;
http://cweb.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=547&kind=4
Harddisk
As for Harddisk, I would suggest anything goes but take a serial ata since that is becoming the new standard nowadays.
When buying a HD larger than 130 Gig, make sure you install from a Windows XP SP1 CD (or higher) or divide your HD in smaller pieces. Otherwise you will not get a bigger partition than 130 Gigs.
DVD/CDROM
As for DVD/CD player, there is a special thread (see below) where everyone states if their DVD/CD player is working with the mega (there are some issues with some drives in HiFi mode, EVEN if they are MSI)
Mega PC barebones optical drive compatibility list
Memory
As for memory, get at least 512 Mb or 1024 Mb if you want to sit cosy. two sticks of DDR400 (a.k.a 3200) will do. Get a a-brand like Kingston, Samsung or look around on the forums what will work.
Installing Windows XP
Before installing Windows disable your USB devices, if you fail to do this you run the chance of not installing Windows XP on your C: drive (harddisk) and this will cause you trouble later on. After installation is complete you may enable them again.
Prescott processors & full size AGP cards
As for the GPU (Graphics card), this depends on what you are going to do with it. If you wanna try out at showshifting, and viewing get one with integrated TV tuner. Or use the on-board (some people are quite happy with it) and add a separate PCI tv tuner. If you wanna do hefty gaming (Doom3, Far Cry ... etc) you may want to get an better one. I'm quite happy with my Radeon 9800.
Please note; According to MSI, Prescott processors in combination with full-size AGP (add-in) cards are not supported. This is most likely a power issue since the full-size cards use a lot of power to run. Some forum members, stuborn as they are, are running with a full-size card.
Also note that you are installing a full-size card on your own risk in combination with a Prescott processor.
To calculate your estimated power supply take a look here;
http://www.jscustompcs.com/power_supply/
The following graphics cards seem to be working (please add to this thread if you have tested a full-size card with a Prescott processor so I can add it to this document)
Club3D Radeon AIW 9800 PRO
ATI Radeon ALL-IN-WONDER 9600 XT
ATI Radeon 9800 SE
AOPEN Aeolus 5900XT 128 Mb
Wise words from Stu:
If you do not want to take chances, go with a Northwood processor. Apperantly there is little perfomance difference between a Northwood and a Prescott processor, and the Northwood runs slightly cooler too.
Windows XP Service Pack 2 & Bios Update
When installing Windows XP with SP2 make sure you have the latest Bios version loaded (1.3) or install a Microsoft work-around fix. SP2 will not install without it, and you will have a hard time getting your system to work.
The Microsoft work-around fix can be found here;
http://support.microsoft.com/default.aspx?scid=kb;en-us;885626
The latest bios version can be downloaded here;
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=547&kind=4
To install the latest bios, I would advise against using live-update. Use one of the following options instead;
1) Burn a bootable CD-Rom also containing the bios and flash software, (note some of the original Win98 CD's are bootable to MS-DOS prompt)
2) Create a bootable USB-memory key
--- Download the HP util to create one
--- http://h18007.www1.hp.com/support/files/hpcpqdt/us/download/20306.html
--- Then create a bootable floppy on an other system or download from
--- http://www.allbootdisks.com/
--- (I used the Win98SE No ramdrive )
--- Then use the HP tool (on an system with an floppy drive) and enter a: as the source for booting,
--- and use the above created floppy.
--- Then copy the rest of the files from the a:\ drive (like autoexec.bat, config.sys etc) to the memory key.
--- ... and ... voila one bootable USB
--- make sure in the bios that the boot order of the USB key is before the Harddisk and your set to go.
3) Attach a floppy drive to the Mega 865
Bios update failure
Some people still manage to goof-up their bios, by doing the bios update from windows (winflash, live-update). I think there is only one road to travel when this happens, you have to attach a floppy drive to your mega. Then follow the following instructions (Award bios)
http://www.msi.com.tw/html/support/bios/note/boot.htm
Good luck !
PC-Alert
Do not use the PC-Alert version from the MSI website as this does not work together with your Mega 865, instead only use the one on the CD-Rom that was supplied. In general even the supplied PC-Alert has caused a lot of grief (Taking up resources, reboot problems ... etc). If you choose to install PC-Alert, at least remove it from your start-up folder where it is installed. You can always start it manually from the MSI menu in your Start menu.
A good alternative to Pc-Alert is Speedfan, this program should be able to spot your 2 temeperature sensored CPU fans. You can then connect these fans to the CPU temperature sensor and be able to tweak the RPM's according to your need. Speedfan 4.17 can be found here;
http://www.almico.com/speedfan417.exe
Temperatures
As these tiny PC's have very little space, it is quite normal for them to run a bit hot. Do not be alarmed to see CPU temperatures around 60-65 degrees when running on load (depending on your processor of course).
Wireless Network adapter
As for wireless internet, the mega865 has a built-in mini-pci nic (network card). which supports only the 11 Mbps data rate. I think you have to try it out and see how it goes, you can always upgrade to 54 Mbps. I would suggest to get a 54Mbps access point, so you can always upgrade if needed (54Mbps will also work with 11 Mbps) Some forum members have succesfully replaced their Wireless Network adapters with a 54Mbps one. The following network adapters seem to be working;(please add to this thread if you have tested a wireless 54Mbps network adapter so I will add it to this document)
Intel PRO/Wireless BG Network Adapter
6 Channel sound
I recently bought a 5.1 set from Soundblaster. You can connect the 3 connectors to the back of your Mega, then in the Sound util set it up for 5.1 surround sound and you are ready to go. Definately worth it !
Reboot problems
When you run into problems when the Mega reboots suddenly, watch out for a couple of things.
Always check your event/log viewer. It is in your configuration management, but the easiest way to start it is to enter the following in your Run or Command line entry
eventvwr /s
Check if you see red-dots in your application section or system section. Google the problems before dropping them on the forum ! (As most problems are not Mega related IMHO)
One problem I had was caused by BITS 1.5, I had to upgrade to BITS 2.0. (I think it was recently released by Microsoft-Update but I mention it anyway). Bits 1.5 caused my Mega to reboot.
LCD Display / Sound problems
If you have any problems where your front LCD display is not working or your on-board sound is 'missing' first try unplugging your mega from the power outlet (so completely powering down) for 2 minutes. If you still have problems, drop them on this forum.
LCD API ?
Alas, no external programs are available to 'drive' your LCD display. Nor will MSI release an API/Blue print on how to control it.
If you find anything missing here or have additional tips, please add them to this thread and I will update this document.
Good luck with your Mega !
Raymond

rkoppen i salute you
a truly glorious summing up of the main points asked about the Mega 865 in particular, although many points will invariably refer also to the other Mega series
if i can add my tuppence worth, anyone considering going for a powerful graphics card can always shy away from the prescott
i was reading an article just when the prescott core cpus came out and the review basically said that there wasn't really much performance wise between the new prescott and the older Northwood cores.
obviously newer prescotts have higher clock speeds now (3.2? 3.4??), but surely a 2.8ghz CPU is still going to be powerful enough to play the latest games!! (in conjunction with a top graphics card obviously)
is the extra temp increase surely worth the extra couple of hundred mhz?

Mega 865 and Girder version 4

Hello,
I am trying to utilize the remote control of my Mega 865. I have installed Nathan plugins and Girder 4. However, still I cant use my RC. Shall I use girder 3.2? How can I get ie?
Regards
Hussein

yeah, I did drop him an email and he said he was too busy.... the source is avaliable, but I ran into problems attempting to compile.
I didnt realise there was different versions of Mega 865.
I've actually got a feeling the problem might be with a C++ dll version. when I look in system manager control folder, it has the MSIDrvIF.dll & ForMpc.dll file as well as a C++ dll. (cant remeber the name and Im at work so will have to wait till im home.)
the C++ dll in windows System32 folder is different from the one in the SMC folder. I tried to replace the C++ dll with the once from the SMC folder, but it is in use by windows.
I will have to try and boot into command promot and overwrite it sometime. will keep people posted.

Mega 865 Pro and Nlite - SCM Issues

Hello, I have just got a Mega 865 Pro and have installed Windows XP on the system using nlite http://www.nliteos.com to strip windows down to the bare minimum, the boot times are great and it goes in to and out of hibernation is seconds, the problem is that I have stripped out one component that allows the System Control Manager to perform properly, my front LED display stays blank, even if I fire up the Intervideo Hometheatre it does nothing and all the front buttons do not respond. Everything else runs fine though
Has anyone tried out nlite and does anyone know which component of windows I've removed that I should have left in?
Thanks
Niblet

I'll try installing the new SCM program tonight, though the original ones that came on the disc didn't work (they did on a standard install of XP that I did)
I'll post my findings later.

Help with mega 865 pro and maxtor sata 6L300S0

i have a mega 865 pro i just install a new HDD model maxtor sata 6L300S0 300 GB and it is very slow on the mega i contact maxtor and they say i have to verify if i have correct SATA driver installed. but everything looks ok on the system. where i can download that driver again? any one can help me?
What im doing wrong?

I'm having the same problem with my Mega 865 pro and my Maxtor 6l200mo (200gb).
Seems to boot up fine, dosn't take any longer to load up startup items than my old system. Though using pretty much any program results in the system pausing and stuttering for a few seconds. I have noticed it most recenltly when watching video files (mpeg/divx). While i'm watching a video, it will keep pausing at random times.....sometimes every 5 seconds....sometimes every 5 mintues. It does the same when i'm not connected to the internet too, and does the same if I am simply playing mp3s or just on the internet! When it seems to do it most is like now! I have an mpeg playing (300mb) in a window, and while I am browsing the internet and even typing this post, it is pausing for a few seconds which is really frustrating! My old system was pretty similar spec to my current Msi system, though it wasn't a barebones system and was slighty lower spec. That worked flawlessly doing the same tasks so my guess is it must be an Ata problem. Another Mega865 gripe that is bugging me!
Any help will be much appreciated. Cheers!
P.s My hd Tach results were pretty much the same as centarlrocks

Mega 865 Pro instant On will not install

According to the instructions, when I boot from the Instant On CD, I should get an option to install it. Instead, I see it loading the ISOlinux, then it goes to a White cursor block in the upper right corner and never procedes to the setup screen. I have a SATA HD 80gb does that matter? I have not installed anything on this harddrive yet IAW the instrucitons. Perhaps this is a bad CD.
I tested the CDROM drive by starting a winxp install and it seems to proceed without a problem.

Ohhh YEAH!!!
Changing from "Native mode" to "Legacy Mode" are VERY GOOD to do the correct installation of "Instant on"
BUT, DVD of instant on NOT WORK because it say me bad region code, with original DVD and I'm on italy.
and is NOT possible change DVD region?!
BUT, I had Ati radeon 9600 PRO 256Mb AGP and the instant on function don't work (don't run, make error address)
I need TVout exit and I DON'T want the TV out of MSI because the graphic card in this MEGA 865 is a little smallest. Do you agree?
If someone can help me is very wellcome.
BUT, I had -Fly TV DUO DVB-T - TV PCI card and the hardware with instant is not recognised and NOT WORK.
OK, I know that is not possible but has philips chip
If someone can help me is very wellcome.
At the end I want say:
MSI technical support, (after contacting many times) NOT EXIST and is sure that is the future I'not choose never more MSI
Thanks in advance for help me

Mega 865 XP Pro install problems.

I just recently put together my 865 with a P4 3.0Ghz, 512mb 400mhz Samsung DDR Ram, WD 160Gb HDD, and Sony DWU-18A 8X DVD+/-RW drive. I had some problems with the machine recognising the hard drive to install XP, but this was fixed by detaching the card-readers. I was capable of installing XP to a partition on the hard-drive, however when it goes into the second phase of the installation where it needs to reboot, if the CD stays in the computer during restarting it will just start the XP setup process from the beginning. If the CD is ejected before restart, i get an error message that i need to "INSERT BOOTABLE DISK" making me assume that the MEGA 865 isn't booting from my hard-drive. Even though XP installed to the drive, the drive still wont get recognized by the CMos setup in the Bios...i've tried swapping cables and IDE channels with the DVD drive which gets recognised wherever it is attached. I've also tried using another Western Digital 80gb HDD, but the Bios will not recognise it either. Both drives used were used as data drives on other machines, and have been formatted and tested to be working fine. Can anyone help me get my 865 to boot from the data already written to the 160Gb HDD during the initial XP setup phase?

Well, I'm not sure why the machine couldn't recognize the hard drive without the card readers attached. That's some mighty strange behaviour there my friend.
Is the HardDrive an SATA or an IDE?
And, if the HD is an IDE, are you sure you connected the hard drive to the hard drive cable, and not the CD cable?

MEGA 865 Built in Wireless will not install

I just put together my second MEGA PC (the 865) and everthing works great but the built in 802.11b. XP Pro will not recoginze the Mini PCI card at all.
I have installed the drivver fromt he CD and from the website. If somene has had this problem and successfuly got the Mini PCI wifi to work then please let me know.
Heck got so frustrated I reinstalled XP pro...as a last resort.
Jason
Atlanta, GA
USA
MEGA 865
P4 2.6 800fsb
1gig kingston
with ViewSonic on Top

Thanks for all the replies to the post...it's nice to know people are willing to help.
How I solved the problem....I took the @$%# thing out... and left it out. I connect fine with the 10/100. and better with a Linksys 802.11g PCI adapter. No problem with that one and it installed on the the first try.
For those looking at the MEGA...I have to say I no problems putting together my 651...and it keeps on running without problems. The 865 has been a little quirky...esspecially when the MSI software is installed. My suggestion for those looking a good SFF solution go with the 651...I have seen it in Atlanta for $99 bare. But if you get any MSI product....the boards are good and for the most part reliable...just STAY AWAY FROM THE SOFTWARE THEY BUNDLE...it will cause you grief
Thanks again for the replies

MEGA 865 Problems with XP install....HELP!!

Hi guys, i just bought a MEGA 865 Deluxe and I can't install Windows XP (Sp1)...i have reached the point where i am seriously considering throwing it out of the window (after 4 hours of troubleshooting!!!).
Specs are: P4 3.0
Crucial 1gb DDR400
Maxtor DiamondPlus 9 SATA 160Gb
Sony DW-G120A Dvd-rw
Bios v1.3
Ok what happens is that during startup it will identify both HD and DVD...it will start reading the Windows CD, but then stop and try to boot from other sources. The DVD-rw works fine in Hi-Fi mode. I tried using another old CD-ROM i have with no luck. I took out the Maxtor and used my IDE seagate from my other PC...again nothing (btw the XP CD works...tried it in another pc). I have toyed around with all possible combinations in the BIOS...manually resetted to defaults...tried all different combinations for the DVD settings (SL,MA etc)...even moved the DVD to the Primary IDE cable...and still nothing. Searched in this forum, and tried some tips...like Disabling USBs, Changing the SATA to Legacy and so on...and still...guessed right... NOTHING!!
I am pretty desperate for some advice. Any tips to try are welcome, before i start sending stuff back for refund.
Thanks in advance!

Yeap...i guess you were right kane81. The CD wasn't bootable...since then i obtained a newer XP version that is bootable but guess what my luck had in store. I fired up the pc as usual, and i got a message on the monitor 'no signal'...?? Tried with another monitor...played with the cable in case it wasnt put in good. Nothing. black screen. It seems like the hard disc is working, but i get nothing on the screen. Also in order to turn it off, it doesn't respond anymore to the 'PC' button....need to pull off the plug. It's like the BIOS has been erased or something. Any ideas? Faulty M/board? Should i send it back and get replacement?
From all machines i ever had, the 865 is the best looking one. I am dissapointed all i could do since i bought it is listening to radio

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes

Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?

I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

I recently attempted to re-install Mountain Lion on my MacBook Pro late 2012 model and the internet recovery is failing.

I recently attempted to re-install Mountain Lion on my MacBook Pro late 2012 model and the internet recovery is failing. I have absolutely no clue what to do here. Any help is greatly appreciated. Thank you.
- Currently if I boot it up there is a flashing folder icon with a question mark in it. I am assuming this means there is no OS because I wiped the SSD and tried to reinstall Mountain Lion
- When I hold Command+R, it prompts me to Choose Network... the problem with this is the wifi constantly is disconnecting. The Retina 2012 does not have an ethernet port so i have considered buying the attachment then returning when done.
Once again Thank you in advance.
Best.

There is nothing to do if you don't have a reliable Internet connection unless you have a copy of the Mountain Lion installer application from when you first installed it.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor"

I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor" Now, the support advisor is discontinued. What do I do?
Please anyone help me.
Thanks

Error "Installer Failed to Initialize" | Install desktop application | Windows

Tvanywhere and Mega 865, install MSIPVS fails ..

Similar Messages

Maybe you are looking for