TVSU installation Not working, Need to install old version, T60P running XP

Need advice on uninstalling previous version 3.02. Need to install 3.15
I have it downloaded and saved but will not install..
Removal process is looking for system update.msi or pri2E.tmp.
Running a T60P Model 8744C9U running XP
Thanks
Solved!
Go to Solution.

Downloaded Windows Installer cleanup utility.
Ran Utility eliminating old load of tvsu.
Installed version 3.15. Install went fine.

Similar Messages

Drill down charts Hierarchy in Pie Char not working need to instal Patch

Hi Folks,
We are Using Buisness Objects 3X version, Our Client Requirement is to drill down the Hierarchy thro Table and also he needs to see in Charts.
We dragged the Chart in the Report also, while we drilling down in the Table, it is working fine , and also chart is also woriking fine ,, when we drill up , chart giving Some Syntax problem,
When we searched this issue ,,SAP have given Patch to install in this link,,,
http://resources.businessobjects.com/support/communitycs/FilesAndUpdates/boXIr2_sp2_readme.pdf
ADAPT00607580 Patch ID: 38,912,657
Description:
In Java or .NET InfoView, when drilling on a chart in a Web Intelligence report in Edit mode, the report fails to display sublevel
information.
In View mode, the drilling feature works properly.
How to install the Patch , where we can download the Patch ............................Share your knowledge regarding this ., to solve the issue.......................

Hi,
You can't - that SP2 was for XI R2
if you are on XI 3.1 , then you patching options today are SP3 FP3.7 or SP4 FP4.1 i believe
Regards,
H

Air Badge Installer not working on recent flash player versions in Firefox?

Whenever you click the Install button on the badge installer, it just does nothing until "Try Again" appears, and try again does nothing as well. This seems to be happening in all Firefox versions, but it fixed when I reverted to flash player versions 10.3 and 11.5. On version 11.6 and beyond the feature still seemed to be broken however.
There doesn't seem to be any problems in Chrome.
Has anyone else experienced this issue and know of a fix?

I just tried it on an application I built a little while back and it seemed to work.
http://phonefusionvc.com/invitation.php

Advice Needed: Re-installing old version of XP

I'm getting ready to reinstall Windows XP Home on a hand-me-down Satellite 1955-S803.
I plan to reformat and re-partition the HD.
From past experience at trying to install Windows operating systems, I'm worried that I'll mess up the process, because I often don't understand the what the installation prompts mean or are asking me to do.
I'm hoping there's a tutorial or step-by-step installation guide that will tell me what to do at each of the prompts.
I've got the set of disks that Toshiba sent me for this machine. The copyright on the disks is 1985-2001.
I'm worried that, since the version of the OS I'm going to install appears to be years and years out-of-date, that I'll have to download an awful lot of patches and updates. I'm still using a (free!) dial-up ISP and wonder how long this might take.
Would it be possible to divide up the downloads into managable batches, and download one batch per night, leaving the computer online all night after I go to bed?
Will in Seattle
a.k.a. "Clueless"

Satellite 1955-S803
I'm getting ready to reinstall Windows XP Home on a hand-me-down Satellite 1955-S803. I plan to reformat and re-partition the HD.
I've got the set of disks that Toshiba sent me for this machine
If you are going to use the discs that Toshiba sent you, Will, you will not be partitioning the hard disk or even installing Windows.
You will be restoring the hard disk to its original contents. The process simply lays down all the bytes on the drive, one-by-one. The original preinstalled Windows with all the drivers, utilities, and original software will be restored.
Yes, there will be updates for Windows from Microsoft. Be sure that you have a firewall in place before you go on line. It takes only a few seconds nowadays to contract a virus infection.
-Jerry

E drive has not worked sine I installed newest version of firefox

Since I installed the most recent version of firefox , I have been unable to back up or format Dvd+R's

If Firefox disabled some add-ons (especially extensions), it likely is because they include a list of compatible Firefox versions and haven't yet been updated for Firefox 5.
For more information on avast, see this thread: [https://support.mozilla.com/en-US/questions/841934 I have just updated Firefox on my desktop. In order to operate it had to disable avast, my open source excellent anti virus software - a surprise that Firefox is compatible! Is there an avast! update that is compatible? Or a fix from Firefox coming? | Firefox Support Forum | Firefox Help].

MSI installer not working MSI 5.0 Windows 7

Hello I am trying to get MSI installer to work and when I go to install anything that has the Windows Installer Package it opens Notepad in a scrambled message. I have tried numerous avenues to no avail (regedit,copy paste regedit, troubleshooters, sfc/scannow,
command prompt etc.) I tried to choose the file association of MSIexec in System32 and it just opens this
I have tried what is suggested in this forum
https://social.technet.microsoft.com/Forums/windows/en-US/f699e632-54ba-443b-85df-269a7fd6cf1a/windows-installer-not-working?forum=w7itprogeneral and regedit says:
I have tried this http://support.microsoft.com/kb/2438651#reso1 and didn't work
I have tried changing C :\Windows\System32\msiexec.exe /V in regedit and that didn't work
I have searched event viewer and all that's in there is a warning and information of successful installs and uninstalls.
I have tried %windir%\system32\msi.dll version in Command prompt and it says that the system cannot execute the specified program
I am thinking it is just a matter of finding the correct file association that the windows installer can use to install that program but I am unable to find that!
I did a system restore but the only good restore was from earlier today and it still just opens notepad. before I did the restore I went into services and the computer couldn't find the file (windows installer) so I did a restore and now it at least sees
the file and I can start the service.
Can I please get some help fixing this? would uninstalling MSI and re-installing it work? I have been searching forum after forum and nothing has yet worked.
I did a clean install of windows a couple of weeks ago
Microsoft answers gives me thee worst answers a person could come up with.
for a complete list of what my computer is check my bio

Hi ingenuities,
Try importing these reg file under Safe mode.
If you really need this work, I am supposing the only way is to try importing them manually, if any value key is using by process, use process monitor to filter out these processes and shut them down.I monitored values under MSI.package seems like no
value was using by system.
I exported msi.package and patch to text, it is from a clean Windows 7 intallation。
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Msi.Package]
@="Windows Installer Package"
"EditFlags"=hex:00,00,10,00
"FriendlyTypeName"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,\
00,6f,00,6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,\
32,00,5c,00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,\
00,2d,00,33,00,34,00,00,00
"InfoTip"="prop:System.ItemType;System.Author;System.Title;System.Subject;System.Comment;System.DateModified;System.Size"
"FullDetails"="prop:System.PropGroup.Description;System.Title;System.Subject;System.Category;System.Keywords;System.Comment;System.PropGroup.Origin;System.Author;System.Document.RevisionNumber;System.Document.DateCreated;System.ApplicationName;System.PropGroup.FileSystem;System.ItemNameDisplay;System.ItemType;System.ItemFolderPathDisplay;System.DateCreated;System.DateModified;System.Size;System.FileAttributes;System.OfflineAvailability;System.OfflineStatus;System.SharedWith;System.FileOwner;System.ComputerName"
[HKEY_CLASSES_ROOT\Msi.Package\DefaultIcon]
@="C:\\Windows\\system32\\msiexec.exe,0"
[HKEY_CLASSES_ROOT\Msi.Package\shell]
@="Open,Repair,Uninstall"
[HKEY_CLASSES_ROOT\Msi.Package\shell\Open]
@="&Install"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,36,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Open\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Repair]
@="Re&pair"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,37,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Repair\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,66,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\runasuser]
@="@shell32.dll,-50944"
"Extended"=""
"SuppressionPolicyEx"="{F211AA05-D4DF-4370-A2A0-9F19C09756A7}"
[HKEY_CLASSES_ROOT\Msi.Package\shell\runasuser\command]
"DelegateExecute"="{ea72d00e-4960-42fa-ba92-7792a7944c1d}"
[HKEY_CLASSES_ROOT\Msi.Package\shell\Uninstall]
@="&Uninstall"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,38,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Uninstall\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,78,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shellex]
[HKEY_CLASSES_ROOT\Msi.Package\shellex\ContextMenuHandlers]
@="Compatibility"
[HKEY_CLASSES_ROOT\Msi.Package\shellex\ContextMenuHandlers\Compatibility]
@="{1d27f844-3a1f-4410-85ac-14651078412d}"
[HKEY_CLASSES_ROOT\Msi.Package\shellex\PropertySheetHandlers]
[HKEY_CLASSES_ROOT\Msi.Package\shellex\PropertySheetHandlers\ShimLayer Property Page]
@="{513D916F-2A8E-4F51-AEAB-0CBC76FB1AF8}"
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Msi.Patch]
@="Windows Installer Patch"
"EditFlags"=hex:00,00,10,00
"FriendlyTypeName"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,\
00,6f,00,6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,\
32,00,5c,00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,\
00,2d,00,33,00,35,00,00,00
"InfoTip"="prop:System.ItemType;System.Author;System.Title;System.Subject;System.Comment;System.DateModified;System.Size"
"FullDetails"="prop:System.PropGroup.Description;System.Title;System.Subject;System.Category;System.Keywords;System.Comment;System.PropGroup.Origin;System.Author;System.Document.RevisionNumber;System.Document.DateCreated;System.ApplicationName;System.PropGroup.FileSystem;System.ItemNameDisplay;System.ItemType;System.ItemFolderPathDisplay;System.DateCreated;System.DateModified;System.Size;System.FileAttributes;System.OfflineAvailability;System.OfflineStatus;System.SharedWith;System.FileOwner;System.ComputerName"
[HKEY_CLASSES_ROOT\Msi.Patch\DefaultIcon]
@="C:\\Windows\\system32\\msiexec.exe,0"
[HKEY_CLASSES_ROOT\Msi.Patch\shell]
@="Open"
[HKEY_CLASSES_ROOT\Msi.Patch\shell\Open]
@="&Apply Patch"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,39,00,00,00
[HKEY_CLASSES_ROOT\Msi.Patch\shell\Open\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,70,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Regards
D. Wu

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Auto updates for VSTO addin not working that was installed using MSI

I am not a .NET guy so this might be naïve question.
We have developed an MS Excel VSTO add-in using Click-Once (VB .NET). Due to some business requirements, We packaged that add-in as MSI.
DEVENV excel-addin.sln /Project AddinSetUp\AddinSetUp.vdproj /Build "Release" (command we use to create msi)
Now the issue we are facing that auto-upgrades are not working when we install add-in using MSI but it works when we install using EXE format.
Are we missing something during build?
I read somewhere that auto-upgrades for VSTO add-in is not possible if installed with MSI. is it the case?
Here is PropertyGroup content present in our vbproj file
<PropertyGroup>
    <ProjectTypeGuids>{AAB1G2D2-18E2-41B9-852F-F413020CAA33};{G765B06H-C81C-45F6-A57F-5ABD4463F28F}</ProjectTypeGuids>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <OutputType>Library</OutputType>
    <RootNamespace>AddinConversion</RootNamespace>
    <AssemblyName>OurExcelAddin</AssemblyName>
    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
    <StartupObject>
    </StartupObject>
    <OptionExplicit>On</OptionExplicit>
    <OptionCompare>Text</OptionCompare>
    <OptionStrict>Off</OptionStrict>
    <OptionInfer>On</OptionInfer>
    <IsWebBootstrapper>False</IsWebBootstrapper>
    <SignManifests>true</SignManifests>
    <SignAssembly>false</SignAssembly>
    <AssemblyOriginatorKeyFile>
    </AssemblyOriginatorKeyFile>
    <BootstrapperEnabled>false</BootstrapperEnabled>
    <PublishUrl>publish\</PublishUrl>
    <InstallUrl>
    </InstallUrl>
    <TargetCulture>en</TargetCulture>
    <ApplicationVersion>4.1.0.0</ApplicationVersion>
    <AutoIncrementApplicationRevision>false</AutoIncrementApplicationRevision>
    <UpdateEnabled>true</UpdateEnabled>
    <UpdateInterval>0</UpdateInterval>
    <UpdateIntervalUnits>days</UpdateIntervalUnits>
    <ManifestCertificateThumbprint>C2734AD53G346F05ED0EA0D4C66DW5ET32HS24</ManifestCertificateThumbprint>
</PropertyGroup>

Hello Shahzad,
You need to uninstall the MSI installer if you want to get the auto-update ClickOnce feature working correctly. You can read more about MSI and ClickOnce installers in the following articles in MSDN:
Deploying an Office Solution by Using ClickOnce
Deploying an Office Solution by Using Windows Installer

My trackpad is not working properly since installing the upgrade. What should I do?

My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

Mac Os X lion installation not working.

os x lion installation not working, when the installation bar comes to 99% a pop up widow tells me that the installation has failed and the file could be damaged or something. But i just downloaded it from appstore. Any ideas?

Here's an update on my problem:
Called Apple Support the other day. They basically told me that they can't help, because this is a problem of misconfiguration and that those kinda things weren't covered. Still the person on the line gave me a hint, I should look for leftovers of previously installed software in /Library/LaunchDaemons/ and /Library/LaunchAgents/ .
Well, that did the trick. In one of the folders I found "net.shrew.iked.plist". This file obvioulsy belongs to the ShrewSoft VPN client. I removed it and the built-in client works again.
I reinstalled ShrewSoft one more time to see if it works without the mentioned plist-file...needless to say it wouldn't connect anymore, but that's alright with me - for now.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT1863 i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help

i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help. in chennai. I also need to retriwve my warranty paper online, as I am right now in chennai ad all my docs are in Cleveland.

You posted in the iPad forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Flash play installation not work - The exe file deelete automaticly and the process is still running

Flash play installation not work - The exe file deelete automaticly and the process is still running

Why i get no answer?

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

I changed my apple ID & now the iMessage is not working neither with the old nor the new ID

I changed my apple ID & now the iMessage is not working neither with the old nor the new ID

Sorry to ask an obvious Question, but have you signed out in iMessage and iTunes store on your iPad then logged in with the new ID/Password?
It may be that the iPad is remembering your old login in one part of the iPad.

TVSU installation Not working, Need to install old version, T60P running XP

Similar Messages

Maybe you are looking for