TVSU & Update retrieve & ThinInstal​ler
Hello -
I have two models T420(4178) and the X220(4287) and I'm trying to use TVSU and/or Update retriver with ThinInstaller.
With the TVSU the update for ThinkVantage Active Protection System (32 bit) does not show up as a required update.
With Update retriver I can download the update "ThinkVantage Active Protection System (32 bit)" but when I run the Thinistaller agaianter that repository it is not being deteceted as a needed update.
This is on both machines that are Windows 7 32 bit.
I'm under the impression that any updates I download into the Update retriever repository will be available and installed when ThinINstaller runs.
thanks for any help you can provide.
Solved!
Go to Solution.
There is a work around that you can use to update Thin Installer so it will properly handle the APS package for T420, X220, etc. The BIOS updates for these systems have been released to the web and we are working on getting them to show up for TVSU and TVUR. Hoping that happens next week.
Workaround to update Thin Installer for APS:
1. In Update Retriever, either do a "Get new updates" or search your repository for a Critical update titled "System Update Patch [Fix multi must-reboot QFE packages install issue and APS device detection issue] for Windows 7"
2. Once this package is downloaded into your repository, go to Windows Explorer and open your repository folder
3. Go to the su_multiqfe_aps_w7 folder
4. Manually execute su_multiqfereboot_aps.exe from this folder
5. Follow the wizard up to the last panel with the Finish button.
6. !!! Uncheck the checkbox and then click Finish. This will export the package to the
c:\SWTOOLS\DRIVERS\SUPATCH_MULTIQFEREBOOT_APS\su_multiqfereboot_aps\ folder.
7. In the folder generated by step 6 you will find two .sys files: tvsuhd64.sys and tvsuhd32.sys. Replace the older files in the Thin Installer set of files with these newer ones.
Now this set of Thin Installer files can be used to install APS on the new systems.
NOTE: Make sure your Thin Installer command includes the parameter -includerebootpackages 3 The APS package is a type 3 so that needs to be specified or else Thin Installer will skip it.
Similar Messages
-
ThinInstal​ler.exe fails collecting Updates
Hey there ,
I am one my way to setup a IBM Update Repository.
I have downloaded severel gigs of IBM Updates with the Update Receiver, everything works fine.
When Iam starting the thininstaller.exe on a client with following parameters:
/CM -search A -action INSTALL -repository \\servername\IBM-Repository -includerebootpackages 1,3,4 -noreboot -noicon
the thininstaller.exe runs but nothing happens.... whats wrong?
when iam starting thininstaller.exe only with -repository \\servername\IBM-Repository and overview with updates appears...
The Repository seems fine..
Please help1) Delete (or rename) database.xml & xsd files from repository (yeah, it messes up with update retriever...)
2) Not sure what settings you have with update retriever, but I found much more useful after changing default parameters so that every package is critical / don't show license / active (under Modify settings -> Update's default status)
3) Leave task manager open before starting thininstaller and check that thininstaller.exe stays active after running command line. That way you can make sure it's doing something...
Hope this helps. -
X230 Family Type 2325 drivers In update retriever
Hey,
I've been using UR for quite some time and it's working great for me with SCCM etc.,
the organization I work for had began purchasing X230 family laptops (Type 2325),
I'm missing some drivers from Update Retriever that are available on the support website,
I'm searching for type 2325 language English OS Windows 7
these are:
ThinkPad Bluetooth g4wb10ww (Version 6.5.1.2700) (appears as BCM... In device manager)
RapidBoot Shield 32/64 (both appear on UR but fails to download while all other drivers successfully download from UR)
USB3.0 Appears but doesn't seem to get installed (it appears In candidate list log of thininstaller),
then I read that on the RapidBoot shield update notes that usb 3.0 needs rapidboot drivers v1.23 (which doesn't appear on the new driver releases page:
http://support.lenovo.com/en_IL/research/hints-or-tips/detail.page?DocID=HT050904
Software name RapidBoot Shield
Support models ThinkPad(R) L330
ThinkPad L420, L421, L430
ThinkPad L520, L530
ThinkPad T420, T420i, T420s, T420si, T430, T430i, T430s, T430u
ThinkPad T520, T520i, T530, T530i
ThinkPad W520, W530
ThinkPad X1, X1 Hybrid, X1 Carbon
ThinkPad X121e, X130e, X131e
ThinkPad X220, X220i, X230, X230i
ThinkPad X220 Tablet, X220i Tablet, X230 Tablet, X230i Tablet
ThinkPad V490u
ThinkPad Edge E120, E125, E130, E135
ThinkPad Edge E220s
ThinkPad Edge E320, E325, E330, E335
ThinkPad Edge E420, E420s, E425, E430, E435
ThinkPad Edge E520, E525, E530, E535
ThinkPad Edge S430
Lenovo(R) V480, V480s
Lenovo V580
Lenovo B475e, B480, B480r, B485, B490
Lenovo B575e, B580, B580r, B585, B590
Zhaoyang K29, K49, E49
Lenovo E49
Operating Systems Microsoft(R) Windows(R) 7 32-bit, 64-bit
Refer to marketing materials to find out what computer models
support which Operating Systems.
Version 1.23
WHAT THIS PACKAGE DOES
RapidBoot Shield is a utility that reduces the boot complete time of PC running
Windows 7 operating systems.
If this package has been installed, updating (overwrite-installing) this
package will fix problems, add new functions, or expand functions as noted
below.
CHANGES IN THIS RELEASE
Version 1.23
[Important updates]
Nothing.
[New functions or enhancements]
- Changed the software name from RapidBoot to RapidBoot Shield.
[Problem fixes]
- Fixed an issue that the desktop window becomes dark and mouse is unresponsive
when SimpleTap is launched during boot time.
- Fixed an issue that RapidBoot does not work after upgrade install on Win7 64-bit
operating system.
- Fixed an issue that mouse cursor intermittently becomes unresponsive for a while.
- Fixed an issue that RapidBoot delays keyboard response during Lenovo Setup(OOBE).
- Fixed a 0x9F BSOD issue that occurs intermittently.
[Note] If you plan to install Intel USB3.0 driver 1.0.4.225 or newer version,
please install Rapid Boot Shield first.
from the log(1st run):
Info 2012-07-01 , 02:32:56
at Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
Message: Candidate list:
Integrated Camera Driver for Windows[reboot type 3]
WiDi driver for Intel cards for Windows 7 64bit[reboot type 3]
ThinkPad Wireless LAN (11b/g/n)[reboot type 0]
Lenovo Mobile Broadband Activation[reboot type 0]
WiMAX Driver for Intel Cards (For Windows 7 32bit)[reboot type 3]
ThinkVantage Active Protection System[reboot type 3]
Realtek Audio Driver for Windows 7 32/64[reboot type 3]
ThinkVantage GPS[reboot type 0]
WiDi driver for Intel cards for Windows 7 32bit[reboot type 3]
Ericsson H5321 Wireless WAN Driver for Windows[reboot type 0]
WiMAX Driver for Intel Cards (For Windows 7 64bit)[reboot type 3]
ThinkPad Power Manager[reboot type 3]
Intel AMT 8.0 - MEI and SOL driver[reboot type 3]
ThinkVantage Active Protection System[reboot type 3]
ThinkPad UNDP Wireless WAN Driver(Gobi3000)[reboot type 3]
Sierra Wireless MC7750 - Gobi 4000 (TM) Softwaree[reboot type 3]
Media Card Reader Driver for Windows XP/732/764 - WW -[reboot type 3]
ThinkPad Power Management Driver[reboot type 3]
Intel PRO/1000 LAN Adapter Software for Windows XP 32-bit, 7 32-bit[reboot type 0]
ThinkPad Hotkey Features Integration Package Setup[reboot type 3]
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 0]
ThinkVantage Access Connections for Windows 7[reboot type 3]
WiFi driver for Intel cards For Windows 7 64bit[reboot type 3]
Intel USB3.0 eXtensible Host Controller[reboot type 3]
WiDi Driver for Intel Cards for Windows 7 32/64bit[reboot type 3]
Intel Rapid Storage AHCI Driver for Windows 32bit[reboot type 3]
Intel PRO/1000 LAN Adapter Software for Windows 7 64-bit[reboot type 0]
Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 64bit[reboot type 3]
WiFi driver for Intel cards For Windows 7 32bit[reboot type 3]
Intel Chipset Support for Windows XP/Vista/7[reboot type 3]
Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 32bit[reboot type 3]
ThinkVantage Communications Utility[reboot type 3]
Info 2012-07-01 , 02:32:56
at Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
Message: Resulted order of candidate list:
Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 32bit[reboot type 3]
Intel Chipset Support for Windows XP/Vista/7[reboot type 3]
Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 64bit[reboot type 3]
Intel PRO/1000 LAN Adapter Software for Windows 7 64-bit[reboot type 0]
Intel Rapid Storage AHCI Driver for Windows 32bit[reboot type 3]
Intel USB3.0 eXtensible Host Controller[reboot type 3]
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 0]
Intel PRO/1000 LAN Adapter Software for Windows XP 32-bit, 7 32-bit[reboot type 0]
Media Card Reader Driver for Windows XP/732/764 - WW -[reboot type 3]
Sierra Wireless MC7750 - Gobi 4000 (TM) Softwaree[reboot type 3]
ThinkPad UNDP Wireless WAN Driver(Gobi3000)[reboot type 3]
ThinkVantage Active Protection System[reboot type 3]
Intel AMT 8.0 - MEI and SOL driver[reboot type 3]
Ericsson H5321 Wireless WAN Driver for Windows[reboot type 0]
ThinkVantage GPS[reboot type 0]
Realtek Audio Driver for Windows 7 32/64[reboot type 3]
ThinkVantage Active Protection System[reboot type 3]
Lenovo Mobile Broadband Activation[reboot type 0]
ThinkPad Wireless LAN (11b/g/n)[reboot type 0]
Integrated Camera Driver for Windows[reboot type 3]
ThinkPad Power Management Driver[reboot type 3]
ThinkPad Hotkey Features Integration Package Setup[reboot type 3]
ThinkPad Power Manager[reboot type 3]
ThinkVantage Access Connections for Windows 7[reboot type 3]
ThinkVantage Communications Utility[reboot type 3]
WiFi driver for Intel cards For Windows 7 64bit[reboot type 3]
WiMAX Driver for Intel Cards (For Windows 7 64bit)[reboot type 3]
WiFi driver for Intel cards For Windows 7 32bit[reboot type 3]
WiDi driver for Intel cards for Windows 7 64bit[reboot type 3]
WiMAX Driver for Intel Cards (For Windows 7 32bit)[reboot type 3]
WiDi driver for Intel cards for Windows 7 32bit[reboot type 3]
WiDi Driver for Intel Cards for Windows 7 32/64bit[reboot type 3]
Info 2012-07-01 , 02:32:56
at Tvsu.Coreq.CoreqProcessor.ProcessUpdatesImplementation(Update[] updates)
Message: Beginning Coreq process: Recieved 32Updates
on the 2nd run:
WiDi Driver for Intel Cards for Windows 7 32/64bit[reboot type 3]
WiDi driver for Intel cards for Windows 7 64bit[reboot type 3]
ThinkVantage Communications Utility[reboot type 3]
ThinkVantage GPS[reboot type 0]
Solved!
Go to Solution.Sorry for these issues, the updates team is still working on getting all the updates published for the new systems like X230...
Bluetooth should be there starting from today.
I recommend not installing RapidBoot Shield unless you have personally tested it and determined that it makes your image boot faster and doesn't cause side-effects.
Intel USB 3.0 has a wrong dependency on RapidBoot Shield, the team is working on removing the dependency. If you are using ThinInstaller you may be able to figure out how to remove the dependency from the XML file yourself... -
Hello,
Yesterday I installed a clean installation of the latest Update Retriever (updateretriever402-2011-07-27.exe) on our server and configured the latest System Update client (systemupdate401-2011-07-25.exe) to connect to it for automatic update retrieval.
This worked out fine yesterday, client connecting to the internal server and retrieving the updates.
This morning this does no longer worked, checked the tvsu_log file on the client reveals that this seems to be caused by the a file named HelloLevel_8_07_00.xml not existing in the SSClientCommon folder on the internal update retriever server.
Checking the content of the target dir on the internal server does indeed show that that file is not present, others are.
Please advice as to what the reason and solution can be.
Thanks.
*** Partial content of the clients' tvsu_log file ***
Info 2011-08-17 , 11:44:16
at Tvsu.Engine.Process.HelloProcess.Start()
Message: HelloProcess Started
Info 2011-08-17 , 11:44:16
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Client level: HelloLevel_8_07_00
Info 2011-08-17 , 11:44:16
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded from: S:\Lenovo\TVSU_Repository\SSClientCommon/HelloLevel_8_07_00.xml
Info 2011-08-17 , 11:44:16
at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
Message: The UDF will be downloaded to-> C:\Program Files (x86)\Lenovo\System Update\session\system\SSClientCommon\HelloLevel_8_07_00.xml
Info 2011-08-17 , 11:44:16
at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
Message: Setting PROCESSING status.
Info 2011-08-17 , 11:44:16
at Tvsu.FileDownloader.LocalDownload.Init(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: Failed to find the file from server: S:\Lenovo\TVSU_Repository\SSClientCommon/HelloLevel_8_07_00.xml
Info 2011-08-17 , 11:44:16
at Tvsu.FileDownloader.LocalDownload.Init(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Message: some error were found in LocalDownload.Init function
Exception:
Message: the file does not exist int the server path
Type: System.Exception
at Tvsu.FileDownloader.LocalDownload.Init(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
*** Content of the SSClientCommon folder on the internal update retriever server ***
26/04/2011 10:29 97 HelloLevel_8_00_00.xml
11/08/2011 15:37 1.267 HelloLevel_8_00_00L.xml
26/04/2011 10:29 97 HelloLevel_8_00_01.xml
11/08/2011 15:37 1.266 HelloLevel_8_00_02.xml
11/08/2011 15:37 1.266 HelloLevel_8_00_03.xml
11/08/2011 15:37 1.266 HelloLevel_8_00_04.xml
11/08/2011 15:37 1.266 HelloLevel_8_00_05.xml
11/08/2011 15:37 1.266 HelloLevel_8_00_06.xml
11/08/2011 15:39 1.266 HelloLevel_8_01_00.xml
11/08/2011 15:39 1.125 HelloLevel_8_02_03.xml
11/08/2011 15:39 1.125 HelloLevel_8_02_04.xml
11/08/2011 15:39 1.125 HelloLevel_8_03_01.xml
11/08/2011 15:39 1.125 HelloLevel_8_04_00.xml
11/08/2011 15:39 1.125 HelloLevel_8_04_01.xml
11/08/2011 15:39 1.126 HelloLevel_8_04_01D.xml
11/08/2011 15:39 1.126 HelloLevel_8_04_01L.xml
11/08/2011 15:39 1.125 HelloLevel_8_04_02.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_00.xml
11/08/2011 15:41 1.126 HelloLevel_8_05_00A.xml
11/08/2011 15:41 1.126 HelloLevel_8_05_00R.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_10.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_20.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_40.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_50.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_60.xml
11/08/2011 15:41 1.125 HelloLevel_8_05_70.xml
11/08/2011 15:41 1.127 HelloLevel_8_05_80.xml
11/08/2011 15:43 1.129 HelloLevel_8_05_80_314.xml
11/08/2011 15:44 1.127 HelloLevel_8_05_81.xml
11/08/2011 15:44 1.127 HelloLevel_8_05_90.xml
11/08/2011 15:42 1.127 HelloLevel_8_05_91.xml
11/08/2011 15:45 1.319 SSClientCommon_7_00_0.xml
11/08/2011 15:45 1.319 SSClientCommon_7_00_1.xml
11/08/2011 15:45 1.321 SSClientCommon_7_00_10.xml
11/08/2011 15:45 1.321 SSClientCommon_7_00_11.xml
11/08/2011 15:45 1.319 SSClientCommon_7_00_5.xml
11/08/2011 15:45 1.319 SSClientCommon_7_00_6.xmlHi ,
Does your issue been fixed? if not, maybe you can post the full log so that I can have a look to see if I can provide some advises,thanks. -
Update Retriever cannot retrieve because of missing files
Hello,
I'm working a while now with Update Retriever to ease deployment of about 40 ThinkPads and a few ThinkStations. The bugs already found and documented in this forum can be worked around mostly - sometimes you have to redownload the whole repository.
But there are some updates the UR fails to retrieve and it won't ever retrieve them properly because files are referenced but missing on Lenovo's servers.
What hurts us most at the moment is that we cannot roll out new Access Connection 5.12 for Vista, because the file 7vcv85wj.txt is missing and UR won't continue without it. With 5.02 being severely broken on Vista this means we may have bet on the wrong horse with TVSU and UR for getting TV-Software on our Lenovos.
Does anybody know how to get UR to work with Lenovo's repositories? If not - is there an alternative to UR short of letting all our Thinkpads download directly over the Internet (which also hurts me, because the content - transferred via SSL is not cacheable)
Update: Forgot that - Maybe there is a channel to report such errors - but I didn't find a clue on Lenovo's support site.
Message Edited by hel on 02-10-2009 02:10 PMit's becoming more and it's becoming annoying.
Here's more failed packages: * Conexant Audio Features II
name="AUDIOC_WXP" version="3.54.0.51"
https://download.boulder.ibm.com/ibmdl/pub/pc/pccbbs/mobiles/7wa109ww.txt
https://download.boulder.ibm.com/ibmdl/pub/pc/pccbbs/mobiles/7wa109wj.txt
* interestingly these files were already downloaded - nonetheless UR fails to import with error 404
(Update 2009-02-19: the broken package count went down to 1 for me - that's better)
Message Edited by hel on 02-19-2009 10:46 AM -
L440 System Update / Update retriever Differences/Issues
I have Got some issues on the L440 model using Update Retiver / Thin Installer model is . (20AS)
Update retriever is not showing the following that system update shows
Thinkpad power manager v6.64.2
BIOS update
Update retriever does show
Intel WLAN Driver - 7[64] V16.10.0
But thininstaller does not show this when run on the machine!!!
It Also has problem installing
Intel SATA Controller AHCI Driver - 7/8[64] - V12.8.1.1000
Warning 2014-03-03 , 03:15:26
at Tvsu.GenericPackageInstaller.InfInstaller.InstallUpdate()
Message: An error ocurred trying to install Intel SATA Controller AHCI Driver - 7/8 [64] update
Can anyone help with this ?Can you do another search through UR and see if the missing content is showing up now? We had some issues with the power managment driver and also the Intel WiFi driver packages. There is a new Intel WiFi package that targets properly to all the supported models. You will see in UR one package that can be used for intial installation on all models and one package that should be used for upgrading a previous driver for non-7260 cards. If you are doing deployments of new systems just get the first one.
-
Issues with Lenovo Update Retriever and T510i Modell 43149VG
Lenovo System Update and Lenovo Update Retriever fail to install Wlan-Drivers on a T510i Notebook.
Following Adapter is missing in dependency configuration: _PnPID PCI\VEN_8086&DEV_0084&SUBSYS_13158086
I added the card manually. Please fix Following package with this Adapter:
g1w213ww_s32
Thanks
I will expand this Thread with TVSU and TVUR Issues soonHi orth04, It sounds like ThinkVantage System Update is not working for you.
One alternative is to manually download and install the drivers.
The other alternative is to make System Update do what you want. Can you give us some more details about what happens?
I don't work for Lenovo. I'm a crazy volunteer! -
ThinInstal​ler problems with SCCM
Hi,
I am having very frustrating problems with ThinInstaller. I am trying to deploy drivers to a Thinkpad with ThinInstaller via SCCM. Hope anyone with experience of it working or any experience of ThinInstaller in general can help.
I am not too sure where the problem lies, although I think it is mainly with ThinInstaller. I am quite new to both SCCM and to ThinInstaller so I have built up what I have for it using what I found on the Internet.
SCCM Setup
I have a Task Sequence setup to initially install the Networking and Storage drivers, this works ok. The machine adds to the domain without any problem. Then I run the commands in the screenshot below.
Task Sequence
Step 1 – Run ThinInstaller Trustzone
%Windir%\Microsoft.NET\Framework\v2.0.50727\CasPol.exe -pp off -m -ag 1.2 -url file://\\192.168.100.236\PackageSource\OSDDrivers\Win7x86\LenovoT420-4236JDO FullTrust
Step 2 – CMD CP ThinInstaller
I run the following command line;
cmd.exe /c xcopy.exe "\\192.168.100.236\smspkge$\SHR0012E\*.*" C:\Lenovo\thininstaller\ /E /D
It gets passed this step; I can see the C:\Lenovo\ThinInstaller folder
Step 3 – CMD Run Thininstaller
I run the following command line;
cmd.exe /c thininstaller.exe /CM -search A -action INSTALL -repository \\192.168.100.236\PackageSource\OSDDrivers\Win7x86\LenovoT420-4236JDO -noicon -includerebootpackages 1,2,3,4
This step doesn’t seem to work.
I have pasted in sections of the Task Sequence as well as details of my ThinInstaller setup below;
Part of ThinInstaller error log
[Thin Installer build: 2009-12-09 Version: 1.1.0005] 5/31/2012 12:09:09 PM
Info 2012-05-31 , 12:09:09
at Tvsu.Environment.EnvironmentManager..ctor()
Message: Starting Environment Manager...
Info 2012-05-31 , 12:09:09
at Tvsu.Nls.NlsResources..ctor()
Message: Starting the instance of NLS@Runtime
Info 2012-05-31 , 12:09:09
at Tvsu.Nls.NlsResources..ctor()
Message:
The active language is: EN
The default language is: EN
The OS language is: EN
The language loaded type is: Override
Info 2012-05-31 , 12:09:09
at Tvsu.CommandLine.CommandLineParameters.ValidateArguments(String[] args)
Message: Validating arguments: System.String[]
Info 2012-05-31 , 12:09:09
at Tvsu.CommandLine.CommandLineParameters.ValidateArguments(String[] args)
Message: The command is: /CM -searchA-actionINSTALL
Info 2012-05-31 , 12:09:09
at Tvsu.CommandLine.CommandLineParameters.SearchForUpdates()
Message: Searching for Updates: A
Info 2012-05-31 , 12:09:09
at Tvsu.CommandLine.CommandLineParameters.SearchForUpdates()
Message: Notify method: INSTALL
Severe 2012-05-31 , 12:09:09
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Application runs with the framework: 2.0.50727.4927
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.DataBase.InitializeDataBase()
Message: Initializing the DataBase from file: updates.ser
Info 2012-05-31 , 12:09:09
at Tvsu.Sdk.SuSdk.StartApplication()
Message: Starting the Application
Info 2012-05-31 , 12:09:09
at Tvsu.Sdk.SuSdk.GetSystemProperties()
Message: Get the System Properties
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.StartExecution()
Message: PreTask
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.StartExecution()
Message: Start
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Starting the task
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: The current process is:HelloProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess HelloProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess HelloProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.HelloProcess.Start()
Message: HelloProcess Started
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.HelloProcess.Start()
Message: MTM is: 4236JD0
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.HelloProcess.Start()
Message: Data to be set in the Environment Manager to use with Quest:
QOS (Quest OS): Windows 7
QOSLang (Quest language): EN
MTM: 4236JD0
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PostProcess HelloProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: The process HelloProcesshas been finished.
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.StartExecution()
Message: PostTask
Info 2012-05-31 , 12:09:09
at Tvsu.Sdk.SuSdk.GetSystemProperties()
Message: Return the System Properties
Info 2012-05-31 , 12:09:09
at Tvsu.CommandLine.CommandLineParameters.SearchForUpdates()
Message: The System Properties are:
4236JD0
Windows 7
EN
Info 2012-05-31 , 12:09:09
at Tvsu.Sdk.SuSdk.GetApplicableUpdates(searchingFolderDelegate spd, showErrMsgDelegate sed)
Message: Get Applicable Updates
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.StartExecution()
Message: PreTask
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.StartExecution()
Message: Start
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Starting the task
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: The current process is:HelpCenterIndexRepositoryProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess HelpCenterIndexRepositoryProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.HelpCenterIndexRepositoryProcess.PreProcess()
Message: 'Share name' to use: \\192.168.100.236\PackageSource\OSDDrivers\Win7x86\LenovoT420-4236JDO\
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess HelpCenterIndexRepositoryProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.HelpCenterIndexRepositoryProcess.LaunchEgather()
Message: Launching Egather
Info 2012-05-31 , 12:09:09
at Tvsu.Egather.EgatherManager.GetEgatherParser(String type)
Message: Running egather complete.....
Info 2012-05-31 , 12:09:09
at Tvt.LocalRepositoryDatabase.LocalRepositoryDatabaseManager.GetDescriptors(String shareName, String mtm, String os, String oslang, String agent, Boolean bValidateLocalRepository)
Message: Received data -> ShareName: \\192.168.100.236\PackageSource\OSDDrivers\Win7x86\LenovoT420-4236JDO\, Agent:
Info 2012-05-31 , 12:09:09
at Tvsu.Egather.EgatherExecutor.RunAsWindowsService(String directory, String command, String arguments)
Message: I received this info:
Directory: C:\Lenovo\ThinInstaller\egather\
Command: ia.exe
Arguments: -filename"C:\Lenovo\ThinInstaller\egather\sysreco" -silent -local -section SYSTEM_SUMMARY REGIONAL_SETTINGS SMBIOS_INFORMATION Firmware_Information Installed_Software SMBIOS_INFORMATION DEVICE_DRIVERS_AND_SERVICES IDE_DEVICE_INFORMATION DEVICE_MANAGER_SETTINGS -p device_manager enable_hardwareid
Info 2012-05-31 , 12:09:09
at Tvsu.Executor.CommandLauncher.ExecuteCommandLine(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
Message: Directory: C:\Lenovo\ThinInstaller\egather\
Command: ia.exe
Arguments: -filename"C:\Lenovo\ThinInstaller\egather\sysreco" -silent -local -section SYSTEM_SUMMARY REGIONAL_SETTINGS SMBIOS_INFORMATION Firmware_Information Installed_Software SMBIOS_INFORMATION DEVICE_DRIVERS_AND_SERVICES IDE_DEVICE_INFORMATION DEVICE_MANAGER_SETTINGS -p device_manager enable_hardwareid
Install type: COMMAND
TimeOut: 300000
HideWindow?: True
Info 2012-05-31 , 12:09:09
at Tvsu.Executor.CommandLauncher.ExecuteCommandLine(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
Message: Directory 1: C:\Lenovo\ThinInstaller\egather\
Info 2012-05-31 , 12:09:09
at Tvsu.Executor.CommandLauncher.ExecuteCommandLine(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
Message: If directory 1 exists: C:\Lenovo\ThinInstaller\egather\
Info 2012-05-31 , 12:09:09
at Tvsu.Executor.CommandLauncher.ExecuteCommandLine(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
Message: The parameters directory and command stay as follows:
Command: ia.exe
Directory: C:\Lenovo\ThinInstaller\egather\
Info 2012-05-31 , 12:09:09
at Tvsu.Executor.CommandLauncher.ExecuteCommandLine(String dir, String cmd, String args, String _installType, Int64 timeOut, Boolean hide)
Message: Type hidden
Info 2012-05-31 , 12:09:09
at Tvt.LocalRepositoryDatabase.LocalRepositoryDatabaseManager.GetDescrips(String shareName, String mtm, String os, String oslang, String agent, Boolean bValidateLocalRepository)
Message: The database.xml file was found in \\192.168.100.236\PackageSource\OSDDrivers\Win7x86\LenovoT420-4236JDO\
Info 2012-05-31 , 12:09:09
at Tvt.LocalRepositoryDatabase.LocalRepositoryDatabaseManager.GetDescrips(String shareName, String mtm, String os, String oslang, String agent, Boolean bValidateLocalRepository)
Message: Processing the data base xml file
Info 2012-05-31 , 12:09:09
at Tvt.LocalRepositoryDatabase.LocalRepositoryDatabaseManager.GetDescrips(String shareName, String mtm, String os, String oslang, String agent, Boolean bValidateLocalRepository)
Message: Processing the data base schema file
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PostProcess HelpCenterIndexRepositoryProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: The size for the UpdateResponse is 32
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: The process HelpCenterIndexRepositoryProcesshas been finished.
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: The current process isescriptorLoaderProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the PreProcess DescriptorLoaderProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Task.Task.Start()
Message: Executing the StartProcess DescriptorLoaderProcess
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.DescriptorLoaderProcess.Start()
Message: Failed to get the file Object reference not set to an instance of an object.
Info 2012-05-31 , 12:09:09
at Tvsu.Engine.Process.DescriptorLoaderProcess.Start()
Message: Failed to get the file Object reference not set to an instance of an object.
Info 2012-05-31 , 12:09:10
at Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Shut Down the Application
ThinInstaller.exe.configuration
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<RepositoryPath></RepositoryPath>
<LogPath>C:\Lenovo\ThinInstaller\ExtraLogs</LogPath>
<LanguageOverride>EN</LanguageOverride>
<BlockSize>4096</BlockSize>
<AskBeforeClosing>NO</AskBeforeClosing>
<DisplayLicenseNotice>NO</DisplayLicenseNotice>
<IgnoreLocalLicense>YES</IgnoreLocalLicense>
<IgnoreRMLicCRCSize>YES</IgnoreRMLicCRCSize>
<DebugEnable>NO</DebugEnable>
<ContentMode>Active</ContentMode>
</configuration>
Task Sequence Error
Failed to run the action: CMD Run ThinInstaller.
Incorrect function. (Error: 00000001; Source: Windows)Create a Folder Applications in Microsoft Deployment Kit
Copy de application ThinInstaller in this folder
Install Lenovo "Update Retriever" on a Windows Machine.
Configure Lenovo "Update Retriever" for download the Drivers
Modify the Repository with;
Close "Update Retriever" and go to the location of your Repository folder on the machine
Copy this folder to the \ThinInstaller folder that you create in Microsoft Deployment Kit
Example: ...\Microsoft Deployment Toolkit 2012\Applications\ThinInstaller
Update sccm dp's
Sccm Task Sequence
Create a Task Sequence lines after Setup Windows and ConfigMgr
Example:
Run Command Line
Apply - Lenovo Driver Based Applications (01) and Apply - Lenovo Driver Based Applications (02)
You need run this twice because there are dependency on the drives package’s
More info let me know
Maarten -
Serenityvalley wrote:
You need to go to This Page and download just about everything on it -espeically the System Update Deployment Guide and start reading. It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
Here are the few simple things you have to do:
1. Download Update Retriever (UR) and Thin Installer (TI) from here.
2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
3. To initialize Update Retriever:
a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
8. Debugging Tips
TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2.
Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
Message: 'Share name' to use:
This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.) Also be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
Message Edited by JaneL on 05-08-2009 10:30 PM
Message Edited by zilla on 2009-05-28 12:48 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
Missing driver in Update Retriever / System Update
Hi,
We are missing a driver in Update Retriever for the T540p model:
The driver is also missing in System Update, when we query Lenovo repository directly.
Neither is the driver available for download manually on the support page.
Device 8086:08b2
"Intel(R) Dual Band Wireless-AC 7260"
http://pci-ids.ucw.cz/read/PC/8086/08b2
T540p (20BF-A0FHMD)
BIOS: GMET59WW (2.07) 2014-02-12
ECM: GMHT25WW (1.10)
ME firmware: 9.0.22.1467
Windows 7 pro SP1, x64
Lenovo could you please add this driver to Update Retriever?
Our deployment of this model is pretty much crippled because of this, since we cannot deliver systems without wireless drivers.
Thank you.dhjensen wrote:
parkerjnc wrote:
We are half way there. It should show up after the next catalog refresh which I'm expecting to happen overnight. Will check it in the morning and escalate if not showing up.
I just checked today and still no luck.
A new version of "ThinkVantage Active Protection System (64bit)" is all i could find for the "3354-Windows 7-English" query
/Daniel
I will correct that. We had approved our own "Costum update" with the same update id. After removing that the update appeared as exspected.
Thank alot for being very helpfull.
/Daniel -
Hotkey package missing from Update Retriever
Hi,
I am unable to download (find) Hotkey package in Update Retriever, for deployment of x240 and t440 computers.
Is that by design or something that can be fixed?Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that system update in your Lenovo X240 and T440 is not able to retrieve hotkey integration features.
Ensure that you have the latest version of Lenovo system update installed. If it didn’t help, I would suggest you to manually download the drivers from Lenovo Support page by entering the MTM number of your machine in the quick path.
If you find any difficulties, please share the MTM number of your device and the operating system installed.
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Update Retriever Update dont show anymore, they gone missing?
Hey All,
for some reason I cant see a single update in Update Retriever anymore..
What to do?Heres the status of the the driver from XML file:
<Package id="83de32ww" name="NVIDEO4200_OPT64" description="ThinkPad Video Features [NVIDIA NVS 4200M and Quadro 1000M/2000M Optimus] for Windows 7 64">
<FileName>83de32ww_2_.xml</FileName>
<Version>8.17.12.6696/8.15.10.2321</Version>
<ReleaseDate>3/30/2011</ReleaseDate>
<Size>400125632</Size>
<URL>://download.lenovo.com/ibmdl/pub/ibmdl/pub/pc/pccbbs/mobiles/</URL>
<Mode />
<Type>Quest</Type>
<Status>Active</Status>
<PreviousStatus>None</PreviousStatus>
<LocalPath>\83de32ww\83de32ww_2_.xml</LocalPath>
<Severity>Optional</Severity>
<DisplayLicense>NotDisplay</DisplayLicense>
- <SystemCompatibility>
<System mtm="4236" os="Windows 7" oslang="EN" />
<<System mtm="4239" os="Windows 7" oslang="EN" />
AAnd here is the command to install the drives via Thininstall:
ThinInstaller.exe /CM -search A -action INSTALL -noicon -includerebootpackages 1,2,3,4 -repository C:\lenovo_updates -
I am left with two unknown devices in Device Manager. It appears to be the Intel Management Engine Interface Driver, which is unavailable in Update Retriever. I see it on the website as gars04ww.exe.
Please add this to the repository.
Thanks,
Hans
Hans LimaThe other one is the Realtec Card Reader gaxm05ww.exe
Hans Lima -
Update Retriever failed to download AHCI Driver
Update Retriever is currently failing to download "Intel Rapid Storage AHCI Driver - 8 [64]" version 12.8.0.1016 with package name IMSM64_G4IO.
Solved!
Go to Solution.Hmm..I've seen this error many times before with various updates and it eventually goes away so I thought this was no different, but maybe it is. As far as an error message goes I've never seen a good error message when this happens. It just says "The following updates failed to be downloaded" and it lists them. I just realized when I search for updates it says the new version is actually the same version as the existing version. The only difference is in the name. I'm wondering if I should just delete the old one and try to update again. I doubt it matters, but here are the names:
old - Intel Rapid Storage AHCI Driver 7/8 [64]
new - Intel Rapid Storage AHCI Driver 8 [64] -
Update Retriever - Error Downloading Power Management Driver
There is an error in Update Retriever, when I try to download the Lenovo Power Management Driver 1.67.00.02 (giku06ww).
The error message is:
1 update failed to be downloaded.
For me it looks like the XML file does not contain a valid CRC information for the file.Found a workaround: (I am not sure, why the CRCs are incorrect. It is possible, that the current driver is compromised!)
download manually the files for the power management driver:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww_2_.xml
There is an error in the XML file, the CRC sum and file size is not correct. calculate the SHA1 CRCs for the files and change the sizes:
<File>
<Name>giku06ww.exe</Name>
<CRC>C9803CFF3B6A8A096AAED2737FB6D6FD3B63B5CA</CRC>
<Size>1278493</Size>
</File>
</Installer>
<Readme default="EN">
<File id="EN">
<Name>giku06ww.txt</Name>
<CRC>80B709F72A4A9BDA3A0A98A31CD58EE188E412B9</CRC>
<Size>32128</Size>
</File>
the file should look like this:
<?xml version="1.0" encoding="utf-8"?>
<?pcdDescriptor version="0230"?>
<Package name="IBMPM_W8" id="giku06ww" version="1.67.00.02" hide="False">
<Title default="EN">
<Desc id="EN">Lenovo Power Management Driver - XP [32]/Vista/7/8 [32,64]</Desc>
</Title>
<DetectVersion type="Registry">
<Registry>
<Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
<ValueName>DisplayVersion</ValueName>
</Registry>
</DetectVersion>
<Summary default="EN" />
<Severity type="3" />
<SeverityOverride type="2">
<Not>
<_RegistryKey>
<Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
</_RegistryKey>
</Not>
</SeverityOverride>
<Vendor>Lenovo</Vendor>
<ExtractCommand>giku06ww.exe /VERYSILENT /DIR=%PACKAGEPATH% /EXTRACT="YES"</ExtractCommand>
<ReleaseDate>2013-06-19</ReleaseDate>
<DiskSpaceNeeded>30000000</DiskSpaceNeeded>
<Reboot type="3" />
<Install rc="0" type="cmd" default="EN">
<Cmdline id="EN">%PACKAGEPATH%\Setup.exe -S -SMS</Cmdline>
</Install>
<ManualInstall type="cmd" default="EN">
<Cmdline id="EN">%PACKAGEPATH%\Setup.exe</Cmdline>
</ManualInstall>
<Uninstall />
<DetectInstall>
<_RegistryKeyValue type="REG_SZ">
<Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
<KeyName>DisplayVersion</KeyName>
<Version>1.67.00.02^</Version>
</_RegistryKeyValue>
</DetectInstall>
<Dependencies>
<And>
<_OS>
<OS>VS-BUS.*</OS>
<OS>VS-ENT.*</OS>
<OS>VS-HOMEBASIC.*</OS>
<OS>VS-HOMEPREM.*</OS>
<OS>VS-HOMEULT.*</OS>
<OS>WIN7-ENT.*</OS>
<OS>WIN7-HOMEBASIC.*</OS>
<OS>WIN7-HOMEPREM.*</OS>
<OS>WIN7-PRO.*</OS>
<OS>WIN7-STARTER.*</OS>
<OS>WIN7-ULT.*</OS>
<OS>WIN8.*</OS>
<OS>WIN8-ENT.*</OS>
<OS>WIN8-PRO.*</OS>
<OS>WXP-PRO.SP3</OS>
</_OS>
<Or>
<_PnPID><![CDATA[*IBM0055]]></_PnPID>
<_PnPID><![CDATA[*IBM0068]]></_PnPID>
<_PnPID><![CDATA[*LEN0068]]></_PnPID>
<_PnPID><![CDATA[*LEN0168]]></_PnPID>
</Or>
<Or>
<Or>
<Not>
<_Bios>
<Level>GDET*</Level>
</_Bios>
</Not>
</Or>
<Or>
<And>
<_Bios>
<Level>GDET*</Level>
</_Bios>
<Or>
<_Coreq name="BIOS_GDUJ">
<Version>1.07.1.07^</Version>
</_Coreq>
<Not>
<_Bios>
<Level>GDET0*</Level>
<Level>GDET1*</Level>
<Level>GDET2*</Level>
<Level>GDET30*</Level>
<Level>GDET31*</Level>
<Level>GDET32*</Level>
<Level>GDET33*</Level>
<Level>GDET34*</Level>
<Level>GDET35*</Level>
<Level>GDET36*</Level>
</_Bios>
</Not>
</Or>
</And>
</Or>
</Or>
</And>
</Dependencies>
<Files>
<Installer>
<File>
<Name>giku06ww.exe</Name>
<CRC>C9803CFF3B6A8A096AAED2737FB6D6FD3B63B5CA</CRC>
<Size>1278493</Size>
</File>
</Installer>
<Readme default="EN">
<File id="EN">
<Name>giku06ww.txt</Name>
<CRC>80B709F72A4A9BDA3A0A98A31CD58EE188E412B9</CRC>
<Size>32128</Size>
</File>
</Readme>
</Files>
</Package>
The update can be imported into update retriever manually and it must be assigned to systems (by default no machine types are assigned).
Maybe you are looking for
-
My mac air does not recognize my printer.
My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.
-
Unable to run XPSDrv Driver and Filter Sample
Hello I'm facing to a problem with XPSDrv Driver and Filter Sample on my Windows 7 x64 machine I installed Visual Studio Ultimate 2013 I installed WDK 8.1 I installed WDK 8.1 Test Pack I installed everything from this site and I think that's all what
-
I need headphones for my Macbook.
I have an old white Macbook ... 2008 I think ... for which I need some headphones. Can anyone tell me if Apple headphones are standard between all hardware? And if not what sort of headphones do I need for it please?
-
Line Item are Printing 2 Times
Hi Experts, when i am trying to take quotation print out line item is printing 2 times....... Can anyone help me to solve this problem.....
-
I need to develop a windows phone store app to test file system. And I use StorageFolder.CreateFileAsync to create a file on ApplicationData.Current.LocalFolder path and write 1MB text content, and read it, modify it, and re-write it. But after about