TWAINbridge message repeats = no sleep

periodically, my computer will not sleep properly.
in the console I see a message repeat about every 10 seconds or so...
"11/10/08 5:55:31 PM com.apple.launchd[76] ([0x0-0xc40c4].com.apple.TWAINBridge[3240]) Did not die after sending SIGKILL 170 seconds ago... "
If I disconnect and reconnect the USB to the printer/scanner, it goes away.
any way to prevent this?

iBrian wrote:
thanks.
no login items relating to scanner/printer
the TWAIN driver comes from the Kodak printer software...likely the one listed below
/library/image capture/TWAIN Data Sources/KODAK AiO Printer.ds
I should also mention that clearing the CUPS cache seems to restore sleep when I get this issue
I suspect that your printer is being polled by the software, waking up the computer or preventing it from sleeping.
Is your printer/scanner on when these sleep episodes occur?

Similar Messages

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.

While deploying sharepoint hosted app i am getting error "Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact
your administrator.". From the developer site i remove the app manually and after deploying i am getting the same error again.
Harminder singh

I was trying to install SharePoint 2013 on premise development environment and encountered the following issues while deploying the app using Visual studio 2013.
Please refer these articles for configuration settings.
http://blogs.msdn.com/b/how24/archive/2013/06/14/prepare-your-sharepoint-2013-farm-for-app-development-and-debugging.aspx
http://www.codeproject.com/Articles/515677/MyplusFirstplusSharepoint-HostedplusAppplusinplus2
http://blogs.technet.com/b/mspfe/archive/2013/01/31/configuring-sharepoint-on-premise-deployments-for-apps.aspx
http://aanuwizard.com/2012/12/07/article-14-from-30-system-account-can-not-deploy-or-purchase-an-app-in-sharepoint-2013-rtm/
Error 1:
Error occurred in deployment step 'Install app for SharePoint': The System Account cannot perform this action.
Error 2:
The local SharePoint server is not available. Check that the server is running and connected to the SharePoint farm.
Error 3:
Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
Solution:
For error 1, follow these instructions:
a. Create a new domain account DOMAIN\myApp_Admin
b. add DOMAIN\myApp_Admin to local admin group
c. add DOMAIN\myApp_Admin to Farm Administrators group
   Central Admin site --> Site Settings --> People and groups
   Add DOMAIN\myApp_Admin
For error 2 & 3, follow these instructions:
1. Grant DOMAIN\myApp_Admin accont a sysadmin server role on SQL server
2. Open SharePoint Power Shell and execute Add-SPShellAdmin <DOMAIN\myApp_Admin> command.
3. Grant DOMAIN\myApp_Admin a db_owner rights to web application Content database that you would like to use for debugging SharePoint 2013 app.
4. Make sure following roles are assigned for SharePoint_Config database
   SharePoint_Shell_Access
   SPDDataAccess
   public
5. Make sure following roles are assigned for SharePoint_Content database
   db_owner
5. Make sure following roles are assigned for SharePoint_AdminContent database
   public

HT1338 I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

I receive this message ,repeatedly,when I try to update an App through App store:Error code 1009.Please help,what should I do?

The App Store is not available in Iran.

IOS7.1.1 messages Repeat Alerts not working

Hi - Since updating to iOS7.1.1 the repeat message alert for SMS /TXT's is no longer working. I have checked my settings which look unchange
Notification Center > Messages > Repeat Alerts > 10 times
Has anyone else had the same issue or no a solution
Thanks

is irrelevant that it was newer called "live"
No, he asked for "LIVE", both in the title and first line of the first post. And no one still knows exactly what he meant, including you. I can only infer the the real meaning of "live" meaning real time, in the real world. Also iIn this world, YOU defined it as "360 degree panorama", which also never existed on iPhones
There is absolutely no reason to deny that this feature existed,
It didn't exist, both as the OP and yourself described it. What did briefly existed - the ability to use and iPhone panorama photo for wallpaper - is not what either of you described and was wisely omitted in the released iOS. There were many complaints about it.
And if you mean it would break the nda to discuss this, the whole thread sould be removed!
As it should...

N5K how to get rid of "last message repeated x times"

Hello
is there a way to get rid of Log messages "last message repeated x times" in order to get the real message, itself ?
I can understand theses messages are useful in case of real Log flood, but not otherwise
NX-0S 7.0.5
thanks in advance

this means material is blocked for procurment
three kinds of block can be there
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for Purchasing
GOTO MM42 give material n plant data
Select BESIC VIEW
there is a field called as material block remove the blocking reason
Hope this will help
Edited by: WISH on Mar 24, 2008 6:33 AM

RV042 error problem : Apr 26 03:31:16 2012 Kernel last message repeated 2 times

Dear sir,
Our detail is "RV042 V03" and using 2 bridge mode modem.
After i upgraded a new firmware v4.1.1.01-sp (Dec 6 2011 20:03:18) , i got many problems in NSD. Both of Modem always hang 5-6 times a day. I had read some solutions from this community. But it couldnt be solved.
and today, i just saw the log line :
Apr 26 03:31:16 2012 Kernel last message repeated 2 times. ( It takes around 5-6 times per hour).. Please tell me what it is and please explain me how to solve the modem hanging problem.
Best Rgds,
Kriengsak L.

Kreingsak,
Is that the whole error message?
What type of Modem are they?
What is the ISP for Both?
Is it just the WAN locking up or the LAN as well?
Are you in Load balance or Smart Link Backup?
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

Console message repeating systemuiserver invalid kmditempath

I found a similar question here:
https://discussions.apple.com/message/11514792?searchText=Console%20message%20re peating%20systemuiserver%20invalid%20kmditempath#11514792
But my problem is different.
I was writing an iPhone app for a client. One of the images the client provided strangely appeared in my finder window under favorites. I don't remember placing there, but when I saw it, I dragged it out of the finder to remove it.
After that, I remembered the project was finished, and dragged it to a 'completed projects' folder.
Now (some time later) I'm seeing this console message repeat over and over:
SystemUIServer: Invalid kMDItemPath for TheApp.app
SystemUIServer: Invalid kMDItemPath for (null)
SystemUIServer: problem with path ???
Any way to remove this?

If you've moved any of those applications out of the Applications folder, put them back. Then do as follows.
From the menu bar, select
 ▹ System Preferences ▹ Spotlight ▹ Privacy
The list of items excluded from Spotlight indexing is shown (it may be empty.) Click the plus (“+”) icon to add an item to the list. Select your volume (under DEVICES) and add it to the list. Then remove it from the list by selecting it and clicking the minus (“-“) icon.
Spotlight will rebuild the index. If you try to do a Spotlight search now from the magnifying-glass icon in the top right corner of the display, a pulsing dot will appear in the icon. When the dot disappears, the indexing is complete.

When I try to install adobe keep getting application mail canceled when i follow prompts message repeats cannot restart through prompt to complete adobe download what is problem

when I try to download latest adobe (trying to unplug) and follow prompts error message appears (application mail cancelled restart by quitting mail then go to apple menu and restart) when I do that this message repeats. Macair. Then it tells me go to mac store for what? Also someone is sending job alerts to my computer how can I get rid of this, I don't know the person. Thanx Snooks lol

Use this link Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
When you have downloaded it, then clean out the old adobe reader and then try to install the latest one, i had to do this about a week ago and it solved the problem.
Regards

LG G3 Text message repeat notification.

Can anyone help me? The online guru couldn't! I set up my LG G3 text message notification to repeat every 5 minutes, this quickly became annoying, so I wanted to revert to a single notification. However, try as I might, I just couldn't find the menu in settings again! I tried to google it, to no avail, so I'm appealing to you, the great knowledgeable public.........thank you in advance!

Open up the message app and look in the notification settings from there.

10g RAC ASM AIX 5.3 error message repeating in crsd.log

The crsd .log file is filling up repeatedly with the following message
2007-06-06 22:02:03.545: [ CRSEVT][629]32CAAMonitorHandler :: 0:Action Script for resource 'ora.lavl001.LISTENER_LAVL001.lsnr' stdout redirection failed for `/u02/home/oracle/product/10.2_crs/crs/log/startyhep7a.stdout` : No such file or directory
Is this expected behaviour or is an action required? What is the cause?
Peter Johnson ACS

I have faced the same problem when i have change the listener port from 1521 to 1526. But the problem disappeared after a clean reboot of both nodes.
First i have stopped all services on both nodes and then rebooted node1, and waited until the node1 is up with all services and the rebooted node2.
I don't know what was the problem actually but got resolved.

Console message repeats itself

Hi!
Got a problem with the console living a life on its own,- a message keeps repeating itself. Think I had a similar problem with a Canon scanner.
Looking for devices matching vendor ID=1193 and product ID=8719
Looking for devices matching vendor ID=1193 and product ID=8719
Looking for devices matching vendor ID=1193 and product ID=8719
Well, anyone know how to kill it or make it behave, it repeats itself every other second, so in a few weeks time ....well caching up I guess.
Thanks!

You need to uninstall the Canon software.
(22123)

Mail - outgoing message repeating within the email

My outgoing email messages are repeating themselves within the message - ie the receiver receives my message, then the same message is repeated again below it. This is a recent change, so I must have changed a setting somehow. Can you help me fix this?

Wendy,
Welcome to the Discussions.
What you are reporting, is an indication that you are using Rich Text Format, and either mixing fonts, or including a Signature or attachment. Mail 2.0 and 2.1 will convert RTF to HTML and the result, for the some recipients will be as you report. Test using Plain Text to Compose, and see if it is resolved.
Ernie

ICalendar error message repeatedly popping up

I am trying to update my iCalendar and have an old deactivated gmail account set up with iCal. The calendar keeps automatically trying to sync the calendar and repeatedly failing, but the error message pops up EVERY time I close it, so I can't delete the old gmail account from my calendar, because I cant click anything while the error message is up. I have deleted it from my iPhone and iCloud, but it will not delete from my computer. Help!!!

One common problem seems to correlate with non-Apple extensions, possibly loaded long ago and migrated from an older Mac OS X.
Linc Davis suggests this as a way to find those non-Apple extensions:
Please copy or drag -- *don't type* -- the following command into a Terminal window, press Return, and post the output (if any):
kextstat -kl | awk ' !/apple/ { print $6 } '

Dial-In - Welcome message repeated after entering a valid conference ID

Hi,
I have a strange issue with dial-in conferencing which started without making any changes. We creating a new Lync Meeting, calling to the dial-in number and entering a valid conference ID the "Welcome to the Audio Conferencing Center..." message
gets repeated. The conference ID is definitily valid and when enter an invalid code I receive the correct error message.
Can't find any related errors in the logs and can't catch the fault from the Snooper.
I have one Front end and a separete Mediation Server with SIP trunking.
Any ideas how to troubleshoot further?

Hi,
Did you solve the issue with the help of the suggestion Luca provided above?
If the issue happen both from internal client and external numbers, please try to restart Lync Services on FE Server and then test again.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

TWAINbridge message repeats = no sleep

Similar Messages

Maybe you are looking for