Tweakers-page wrong info on haswell E processors?

Hi,
Tweakers-page says the 5820 haswell E cannot handle two GPU due to limited pcie Lanes. Other sources say otherwise.
I'm wondering if I truly need a better cpu than the 5820 to run ddr4 ram, 3 ssd drives, 3 hdd drives, 2 970 gtx cards.
The next cpu is a couple hundred extra and has 40 pcie Lanes vs the 28 in the 5820. And the next up cpu is only. 2ghz increase aside from the pcie Lanes. So if I don't need the extra Lanes, why would I spend a lot more for a small gain? I know these are beginner things to ask.
Thanks!

I think I misunderstood the tweakers page. I guess the 5820 CAN handle 2 GPU, but will be unable to run them at full speed due to limited amount of pcie lanes.

Similar Messages

Excise Invoice Tab Page/ Document Info Tab Page is not appearing in MIGO

Dear Friend
For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
Thanks
Chandra

Hi
I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
Thanks
Chandra

How can i do the word processor's page operations in my java word processor

Hai,
I am developing a word processor using Java. It�s workspace is JTextPane. In order to give the page view and do page operation I have assigned one JTextPane per page.
Generaly in a word processor if the cursor completes a page, a new page will be created and the cursor will be fixed in the starting position of the new page.
I need to do the same thing in my word processor.
That is I need to restrict the JTextPane(page) in such a way that the cursor has to be always inside the JtextPane. It means that the JTextPane (page) should not increase it�s size whenever the cursor goes out of it�s size. Instead a new JTextPane(page) can be created and the cursor can be fixed in starting position of the new JTextPane.
Thing is that a text component can be added with or without the JScrollPane. In the first case both the scroll bar and the cursor will appear if it goes out of the text component�s rage. In the second case neither scroll bar nor cursor will appear. So these two will not help me.
How can I do this in my word processor?
I will be grateful to you if you send some suggestion.
With regards,
K. Saran

Hi,
this is not an answer to our question, sorry.
I'm fairly new to Java but is working on a projec similar to yours. I always use other code to learn how new parts of java works. Haven't been able to find any examples of initializing JTextPanes though. Any chance of you posting some here?
Would be much appriciated.
Alternatively: do u know a site where u can find such examples??
Kind Regards
Thomas

How do I stop the drop box from activating, it is using the wrong info and I can't stop it

When I use the slot to provide my e-mail address, the drop box is activated and has the wrong info in it

See this: <br />
http://support.mozilla.com/en-US/kb/Form%20autocomplete#w_deleting-individual-form-entries

ERRO info 00671: Abap/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

When I created an Purchase Requistion via PS, I cannot save the requistion, the first message I from SAP office express is Update was terminated, and the error message information is as follows:
ERRO info 00671: Abap/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
What can be the problem?
Thank you.

It seems there is a problem with PR number range....systems generate a PR number which is already existing in database....someone might have changed the number range....you may check that.

Pages size info in pages panel grayed out

Hello,
OK....when I go into the pages panel, there is a flyout menu that says Pages Size info....yet everything is grayed out...No matter what or how I choose the pages, it is grayed out...How do you get this to activate?
Thanks!
babs

There is no such item in Pages panels menu usually... Do you have some plugin installed and expired?

Since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status

since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
I've attached screenshots of the About This Mac section hoping it may help shed some light.
Thank you in advance for your help!
PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
<Image Edited by Host to Remove Serial Number>

"View shopping cart" at Check out page link info is wrong..

will not go back to the original shopping cart, will go to the page "cart is empty".
So check out page inside secure zone will not go out of secure page which is original shopping cart page.
Browser back button will work properlly.
Doe it control by {module_shoppingcartsummary}?

1. Add to the product to the shopping cart.
2. press "Check out" button which will go to Check out page that you can fill
all informations, your name, shipping address, card info.
there is the "view cart" butom suppose to go back to the shopping cart.
3. will go to the page, "your shopping cart is empty"
I checked all the HTML, modules and tags.
It seem to be controlled by {module_shoppingcartsummary}??
Shopping cart address:
http://www.beelinecompany.com/OrderRetrievev2.aspx?CatalogueID=192950
checkout page address:
https://beecopy.worldsecuresystems.com/OrderRetrievev2.aspx?Step=13&CartID=1abd735a-7127-4 7fe-9142-ee3c60342315&CheckOut=1&ASESSID=4292d714-b7d3-4227-b8ee-2c1f53170fd8&ANONID=4292d 714-b7d3-4227-b8ee-2c1f53170fd8&VISID=1b1949f6-4b17-426c-9322-51f85430ebf0%23www.beelineco mpany.com%2309.12.2012+19%3a34%3a55.384&VID=28922712&VSV=&SelectedRateKey=-100075484
When I press "view cart" above page, will direct to the following page, cart is empty:
http://beecopy.businesscatalyst.com/OrderRetrievev2.aspx?CatalogueID=0

I can't print the full page of info or even get a pdf of the full page why

i'm reviewing information on the carnival cruse line of excursions. When i select an excursion i can't get all of the info to print either as a pdf or printer page; i get half the info

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Which table will have Page(XML) info

After importing say TestPG.XML using import command, where to check whether this page is imported not. Where is the MDS info r stored?

As for the question on which tables are used, there are four:
APPLSYS.JDR_ATTRIBUTES, APPLSYS.JDR_COMPONENTS, APPLSYS.JDR_PATHS and APPLSYS.JDR_ATTRIBUTES_TRANS.
You are much better off using the JDR utils to see if it has posted. I used the following to see if something I recently imported worked properly:
DECLARE
BEGIN
jdr_utils.listdocuments ('/oracle/apps/ar/cusstd/acctoview', TRUE);
END;

Some wrong info on a post marked solved and archived

hey,
so i found some wrong infor at this link, and since it was the post that helped me start towards fixing my issue, i thought i'd fix it if there is anyway to unarchive and addendum to it.
the link is: http://discussions.apple.com/thread.jspa?messageID=4592570
it's about an error 751 when scanning to an SMB dir on a canon iR C5185
actually, the hostname should be \\XXX.XXX.XXX.XXX (the ip address of the smb server you are trying to put a file on)
and the file path should be the path on the server in the format of:
\put\scanned\files\here
so for a hypothetical example
hostname: \\192.168.1.2
file path: \shared\filedrop\folder
i was frustrated with this for an hour or two, so i figured i should help out and correct the slightly erroneous info on the URL above. If i need to go about that process in some other way please let me know.
regards,
-mike
p.s. for some reason, the 2 back slashes in fron of the hostname ip address aren't showing up when i post this message... the host name needs 2 backslashes in front of the ip address. \\
Message was edited by: bigmikebrooklyn
Message was edited by: bigmikebrooklyn

I was just comming up on day 5 of constant connection at 7616kbps and then the sync dropped. it only dropped for about 30 seconds and reconnected at the same speed and stats.
ADSL line status
Connection information
Line state   Connected
Connection time   0 days, 2:08:17
Downstream   7,616 Kbps
Upstream   448 Kbps
ADSL settings
VPI/VCI   0/38
Type   PPPoA
Modulation   ITU-T G.992.1
Latency type   Interleaved
Noise margin (Down/Up)   6.1 dB / 26.0 dB
Line attenuation (Down/Up)   42.0 dB / 23.0 dB
Output power (Down/Up)   19.8 dBm / 12.5 dBm
Will that mess up my chances of my IP Profile going to 6500 where it should be? as of an hour ago it was still on 2000K.
Thanks.
Dean.

When I try to "Get Track Names" or "Get Album Art," the wrong info or no info is retrieved

I'm using the latest iTunes and Lion OS.
I have many songs from long ago (not downloaded from iTunes) which have incorrect album names, etc., and I want to clean them up, but when I enter the correct info and select "Get Album Art" or "Get Track Names," either nothing is found or the incorrect information is returned, respectively.
For example, I have a song:
Artist: James Taylor
Album: Greatest Hits
Name: Mexico
It does not have the associated Album Art, nor does it have the rest of the information like Track, Year, etc. It just has the Track Name, Album Name and Artist Name. I want to update this to show that it is from the original Album, "Gorilla," so I right-click and select Info, and I fill in the Album Name as "Gorilla." When I right-click and select "Get Album Art," it tells me: "Artwork for "James Taylor - Gorilla" could not be found - though it exists in iTunes. When I right-click and select "Get Track Names," the item is updatd, and now it reads:
Artist: America
Album: Mellow Rock Hits Of The 70s: Summer Breeze
Name: A Horse With No Name
When I rename everything to "James Taylor," "Mexico," and "Gorilla," and select either "Get Album Art" or "Get Track Names," I get the exact same thing: no album artwork found, and it renames it to America.
What is happening? What am I doing wrong? Do I have the wrong expectations of the two right-click options?

I don't think CDDB and iTunes Store is the same. The CDDB gets information for CDs only (not collections of tracks made from a CD) and uses CD features such as track lengths (exact, which could be modified by a fraction of a second when you make a MP3) track count, etc. It doesn't use any information such as artist, track name. From what Mike Johnson12 was saying it seems that ITMS uses the base tag information to identify the track fully.
I have never used iTunes Store to label a track so I can't provide information there. I have no idea what criteria it uses, but for other id3 tag application and iTunes, by "exact" we mean exact. Letter case is important, and I have even found that sometimes font can make a difference.
For album artwork I do a Google search, then restrict the finds to images and select the best quality I can find. This is also the biggest in terms of file size so I only attach the image to one file in a track. When playing iTunes on the computer it displays that image for all tracks in that album.

Data Guard -- v$archive_log applied column shows wrong info

I'm playing with 10g Data Guard. Both Primary and Physical Standby are in Maximum Availability mode. When I query v$archived_log column applied for dest_id=2 (which is physical standby) for some files it shows NO value but alert log on both primary and standby shows file transferred info. Even on physical standby v$archived_log shows log is applied YES value. My question is : So why is Primary database's v$archived_log shows value NO ?
I am trying to setup crontab so that once I see value YES in primary's v$archived_log for dest_id = 2 then I can backup archived log file and delete it from primary database machine. But my perl script won't work because primary v$archived_log shows value NO for applied column for dest_id = 2.
Thanks.

Hi OrionNet,
I think I am looking at the wrong column and also on the wrong database for what I need to do. Let me explain what I am trying to achieve.
I have a shell script to check if archived logs are shipped from Primary to Standby AND if Standby successfully applied it or not. My shell script was looking at Primary databases using following query
select sequence#, archived, applied
from v$archived_log
where dest_id = 2 -- running on Primary BUT looking at standby archived log destination
order by sequence# ;
SEQUENCE# ARCHIEVED APPLIED
=====================
58 YES YES
59 YES YES
*60* YES NO
61 YES YES
After reading [v$archived_log reference entry in manual|http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_1016.htm#REFRN30011]
APPLIED Indicates whether the archivelog has been applied to its corresponding standby database (YES) or not (NO). The value is always NO for local destinations.
This column is meaningful at the physical standby site for the ARCHIVED_LOG entries with REGISTRAR='RFS' (which means this log is shipped from the primary to the standby database). If REGISTRAR='RFS' and APPLIED is NO, then the log has arrived at the standby but has not yet been applied. If REGISTRAR='RFS' and APPLIED is YES, the log has arrived and been applied at the standby database.
You can use this field to identify archivelogs that can be backed up and removed from disk.
I think I should use following query on Standby database and not on primary database
select sequence#, registrar, applied
from v$archived_log
where dest_id = 1 -- query running on standby so dest_id = 1 which is standby archive log destination
and registrar = 'RFS'
order by sequence# ;
SEQUENCE# REGISTRAR APPLIED
=====================
58 RFS YES
59 RFS YES
*60* RFS YES
61 RFS YES
So, my shell script should connect to standby database from primary database and evaluate which archive logs to delete after backup from primary machine.
Now I'll generate some gaps on Standby and check query again to make sure what I understand and expect is correct.
Hope I am clear now. Thanks for your help. My bad, I didn't read the manual correctly the first time.

Why doesn't each 'page's info' adhere to the settings for the plug-ins?

When I check my plugins, add ons, for updates, there are option blocks on the right that set whether or not to "Always Activate" or "Always Ask". My question is- -for every page that opens, there is a "page info" option we can check to see/check what is allowed or blocked under Permissions ... And* what the Permission 'settings' ARE for That* page. Why doesn't EVERY page display the Permissions' settings that we have Already set on the Plugins screen*(?). EVERY page has to have the permissions re-done for EVERY domain/server/site provider. Why* aren't the settings that are set on the Plugins screen Used* AS the 'Default' for every page/domain/site, etc.? Note*- if I DON'T change the permissions to "allow", for certain plugins, the page will not work*.
Also, the "Java Deployment Toolkit 7.0.450.18 10.45.2.18" still* shows as "Vulnerable" After* updating (verified update*). So I found the option to 'Disable' this particular plugin. Now it displays at the bottom of the Plugin page, greyed out. However*... after updating to Java "SE7 U45" (..for 1 [One*] day ONLY, it showed as Up-to-Date, NOT vulnerable, on every 'page info' screen*) ... and Actually, it Still Does show as Up-To-Date after an Update check*..(??)... But on EVERY page info screen the "Java(TM) Platform SE7 U--Vulnerable Plugin!" is displayed (?). How can it be Up-To-Date and OK on the plugin check screen, but show as a "Vulnerable Plugin" on EVERY 'Page Info' screen?

Sorry, RamboTrader ... I Thought I was replying to another guy that had made a suggestion to me*.. (MY bad*) ...
... But I'll try to answer some of your questions ...
1- usually, "yes"* just make sure you Trust that site (if you have anti-virus, anti-malware, etc, and run a scan every week (or so) and Haven't come up with anything quarantined or removed yet, you''re probably safe there*
2- sorry, "yes", there's Always a real danger... that's why we have the anti-everything we have (right?)
3- depends on the site*. A Lot of sites don't need java at all (except to run their ads or commercials... 'targeted' or not). Adobe Flash or Shockwave should be able to handle stuff like youtube, etc (but if it doesn't*, just go into the 'Page Info' Permissions* and Allow the [Vulnerable] Java and see if that fixes it). It more than likely will.
I think it's just a matter of Time* before Adobe* Flash, and practically Every other video app/player may be marked as "vulnerable"... like Java... because every one of them CAN carry a virus or trojan to us in some imbedded format. If JAVA couldn't find a way to stop them* (hackers, etc*) they either ..1-aren't smart enough, or 2-just gave up trying to stay ahead of them... (like the 'ad' says, some-unGodly-percentage-of-machines use Java already ... so They are making Their money*... what more do they need to do, really..?). They don't care* about us or our stuff, as long as we Buy More.... but I'm a bit jaded*.

Tweakers-page wrong info on haswell E processors?

Similar Messages

Maybe you are looking for