Twice decrease in size of Sun Studio 12 Update 1 in cmp-on to Sun Studio 12

Recently I have downloaded Sun Studio 12 Update 1 from the Sun server to my computer and I have found an astonishing thing. All the downloaded archives are much smaller (approximately twice) then corresponding archives I "pumped down" previous time, half a year ago. I remind this was a Sun Studio 12 distribution (no word update in the name), the archives were called for example "SunStudio12ml-solaris-x86-200709-pkg.tar.bz2" (the present corresponding archive is SunStudio12u1-SunOS-x86-pkgs-ML.tar.bz2). All new archives are smaller then previous. I didn't install Sun Studio on my computer, still I'd like to understand why the size of these distributions reduced. By no means I think that the quality of the program is determined by its size, but the trend of the modern software is such that every new release of the product is larger then previous, as it accumulates additions, acquires new features. Why this new version of SS 12 diminished in size? What are the distinctions of Sun Studio 12 Update 1 from Sun Studio 12? I'd like to get answer from developers familiar to this family of Sun products.
Edited by: user_1234 on Dec 14, 2009 7:01 PM
Edited by: user_1234 on Dec 14, 2009 7:03 PM

Sun Studio 12 shipped with about 250Mb (uncompressed) of Java 5 + patches, along with other patches.
Sun Studio 12 upate1 did not need all of that. Only about 10Mb (uncompressed) in patches was included.

Similar Messages

Printing Crystal Report decreasing font Size in web.

Printer reduces font:
when we use crystal report`s print button to print report, It reduces original font size....
I am using Crystal report viewer to preview and print the report in which print mode is "pdf". I tried with "ActiveX" mode but its generate error...
I using Crystal Report 13.0 in asp.net2010.

Make sure you are on SP1:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
See KB [1218753|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733353333%7D.do]
Next time, don't forget to search these forums and use the search box in the top right corner of this web page to get KBs, wikis, blogs, etc., etc.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

I am trying to decrease the size of my aperature library on my MB Pro HD. I used file\ relocate master to move files to my External HD(EHD) and this worked. However, the size of my MBP library has not decreased.

I am trying to decrease the size of my aperature library on my MB Pro HD. I used file\ relocate master to move files to my External HD(EHD) and this worked. However, the size of my MBP library has not decreased. I do not want to delete the files on my MB Pro until I am confident Aperature can see the files on the EHD. It looks like the relocate master fxn just copies the masters and data to another location.

Relocate master (or original in newer versions) does move and not copy the master file. Jut to make sure I just ram a test and moved some images out of the library to an external drive and they were definitely gone from the Aperture library.
If you look at the images in the library that you moved do they have the referenced file badge? If you run a filter on your library looking for referenced files do the images you relocated show up? If you select one of the images and do a Show in Finder what does it show? Finally if you select the images and do Locate Referenced files do they appear listed as being on the volume you put them on?
You could go into the library and look for the masters you moved to see if they are still there but if all the above show you they were relocated then I don;t think you will find them.
How are you checking the library size? Have you quit Aperture and restarted it (better would be to log out and log back in) and then checked the size? It is possible that some of that data is cached and won't get updated till you restart.
Finally you could do a library repair in case something got 'stuck'.

Problem with decreased font size in exported PDF.

We have a web site running on a Windows 2008R2 server.
The site was developed with Visual Studio 2010 using .NET 4.0.and is running in 32bit. The associated application pool uses a specific local user.
We have some reports that include a barcode font. The font is installed on the server and the reports are rendered in PDF on the server side to avoid the need to have the barcode font installed on all clients. The PDF renders correctly but we are facing the decreased font size problem
We followed the instructions included in this post:
Unfortunately the part regarding VS 2010 does not seem to work.
If we add the specified Key on the HKLM section of the registry, it doesnu2019t have any effect.
If we add it on the HKCU section while logged in with the same user assigned to the application pool, everything seems to work fine. But as soon as the user is logged out, the reports stop working.
Have anybody figured out how to configure correctly those keys with this configuration?

Try putting it under the HKU/.default path. You can also use process monitor to see where the application is looking.

How to decrease the size of image using a java peogram

Hi All,
I want to decrease the size of an image from MB to KB. I have some images of size around 1MB to 3MB. While displaying all those images in the browser it is taking so much time to download all those and display. So I want to write a Java program to make a duplicate copies of those images, which are small in height and width and display those images in small size. Basically I need to display all the list of images as thumbnail view or list view with faster speed.
Thanks in advance..
Upendra P.

I read the documentation. There is no corresponding Image class. The other
classes are like BufferedImage and all.Yes BufferedImage sounds like what you want.
You could (1) Read the image (2) Obtain its dimensions and create a blank
scaled image (3) Draw a scaled version of the original image using the
Graphics2D obtained from the smaller one. (4) Save the smaller image.
The javax.util.ImageIO class will help with reading and writing the data and
Sun's Tutorial has a section on "2D Graphics".

Decrease the size of a series marker on a bar chart

I am trying to decrease the size of a square series marker on a bar chart in crystal reports.
Usually this can be achieved through the 'appearance' tab in the 'chart options' menu.
However as I have changed one of the series(bar) on the graph into a line, this no longer seems possible.
Is there a way around this?
Thanks

Hi Natalie
In order to decrease the size of a square series marker after changing the series into line, you can use Format Series Marker -> Border -> Thickness.
Hope this helps!
Regards
Poonam Thorat

Maximum size of a single update metadata.

Hi,
I have written a tool to parse WSUS update file, it parses a single update each time. But my tool takes a huge amount of memory for some updates, as they are large in size. For a update on windows8, the metadata size of a update is 18Mb. I wanted to know if
there some maximum size limit on the size of the metadata, for a single update.
Thanks,
Suraj

Hi,
Based on one of the documents from SAP,
When you are creating dimensions for your application set you should be aware of the following maximums for any one dimension.
u2022 The maximum number of fields in a table (a dimension = 1 table) is 1024.
u2022 The maximum record size is 8064 bytes (a record = 1 row in a table)
The two maximums above relate to the underlying SQL database in which BPC information and data is stored. They need further explanation as to how they relate to a BPC dimension. In BPC a field equals a property. So you can have up to 1024 properties in a dimension. One other factor that has an impact on the actual number of properties you can have in a dimension is the number of levels you have defined. SQL Server creates a set of properties for each level within the dimension. For example, you have 10 properties and three levels in your dimension, your total number of fields is 30. The second limiting factor is the size of the record. To determine record size you have to figure out the number of bytes (a byte equals a character) in each level. Since levels are repeated you only need to figure out the number of bytes in the first level and then multiply that number by the number of levels. To come up with the total number of bytes for a level you simply add up the field size for each field and multiply it by 2 (1 character = 2 bytes).
Hope this gives you some idea.

Decreasing the size of PDF to archive.

Hi
Just wondering if anyone knows of a way to decrease the size of a pdf file that is created for archiving purposes. I have had a couple of thoughts on it.
1)I read by changing the font to Acrobat base fonts would reduce size but dont really want to go changing all the fonts on the final output of the doc.
2) Ensure no extra presentment targets are being compiled into mdf.
3) Reduce any images etc inside the ifd.
If anyone has any other suggestions i would really appreciiate them
Thanks.

Our users are not even aware that the form is being regenerated. They just click on the one they want and the underlying code knows to retrieve the original DAT file, change the job name to the one that results in a PDF being sent back to the user and places it on the server.
As far as the job name goes, it appears that since the MDF name is currently being used that in reality no job name is being provided (I think that is the case). Either that or the source of the DAT file is building the file that way. To get the customer name or account number then the source of the DAT files would have to be modified to do that.
Personally, it would definately be unmanageable if we used the MDF name as the job name because we not only use multiple MDFs per job but we have 100s of MDFs.
I don't know how many customers are involved but using that information as the job name could be cumbersome due to the potential number of job definitions that would be required.

Visual Studio Update 2 hangs for 13 minutes on "Creating a system restore point..."

It appears that Visual Studio 2012 Update 2 hangs for a long period of time before it tries to create a system restore point. Should I create a Microsoft Connect issue for this?
Here is what I did:
I created a new Windows 8 x86 Virtual Machine using VirtualBox. I installed Visual Studio 2012 and Update 1 because Update 2 was not yet out. I came back 1 week later and tried to install Visual Studio Update 2.
When I ran the installer on the Virtual machine, it hung for seemingly 10 minutes at "Creating a system restore point..." I powered off the virtual machine and disabled system restore. I then ran with the /layout option on the host machine
so I could pre-download the files. Then I tried again.
Again, it hung. This time I let it go. It hung for exactly 13 minutes before it gave up and continued on to the install. The log file says this:
[0EBC:0F90][2013-04-18T12:39:36]: Apply begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Apply Phase Begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: -----------------
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Metrics: ShouldSendData=False
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Free Disk Space before install: SystemDrive C:\ 32519413760 bytes AppDrive C:\ 32519413760 bytes
[01F4:0748][2013-04-18T12:52:34]: Creating a system restore point.
[01F4:0748][2013-04-18T12:52:34]: Could not create system restore point, error: 0x80070422. Continuing...
NOTE: Although it says "Creating a system restore point" at 12:52, it actually displayed the message on the screen at 12:39. That indicates that it was really doing something else during those 13 minutes, not creating the restore point.
That is corroborated by the fact that it took a long time regardless of system restore being on or off.
If no one has any information or explanation, I will create an issue on Microsoft Connect.

I have the same issue. Visual Studio 2013 Professional update 2 was not installed from Web installer. Rather I downloaded a trial version and now want to uninstall it. However, I let the uninstaller try to create a Restore Point all night while I slept.
Next day, not done. So I clicked cancel, and it then commenced to create a restore point for the cancel. I did let the cancel run for awhile but I rebooted.
I then researched something on how to disable the restore point security on my drive, but that did not deter Visual Studio from trying to protect me and it TRIES to create a restore point before uninstalling. Just hangs forever. I don't need a restore point
for an eval copy of VS, thank you very much. Perhaps a simple dialog ("Do you want to create a restore point?") would be helpful?
Update: turning off Windows Defender fixed the problem.

Music files are showing as twice their real size

hi all I just transferred 40 gb of mp3 files to my new mac from my old pc using a thumb drive. however the mac finder says that the files are taking up 80 gb of disc space. itunes correctly shows it as 40 gb. I tried compressing the whole music folder but the machine tells me there is not enough space. help!

prinkipo wrote:
hi all I just transferred 40 gb of mp3 files to my new mac from my old pc using a thumb drive. however the mac finder says that the files are taking up 80 gb of disc space. itunes correctly shows it as 40 gb. I tried compressing the whole music folder but the machine tells me there is not enough space. help!
When you say the files are twice their real size, did you actually check a single individual file and find that this is the case?

How to decrease SGA size in oracle 9i

hi,
how to decrease SGA size .. now SGA size=400m i want to drecrease to 150m
Thanks,
Mohammed

Why do you want to do this? Is your system low on memory?
Perhaps your DB is on a laptop with
only a small amount of memory?
Well an enterprise database server set of
thread inside a complex service would need
a high powered laptop with large amounts
of memory.
Or perhaps your UAT server has 10 databases
on it all competing for resource?The culprit may not be Oracle.
For example (as you have not told us your operating system, windows linux unix?) IBM's AIX unix operating system comes configured optimally for managing file caching in the OS memory; as Oracle also caches the blocks read from disk sometimes the file system caching is redundant and ends up using memory better allocated to Oracle. In that case you tune the Unix kernel to reduce memory allocated to the file system caching. The default settings allow IBM AIX to take up to 80% of system memory for caching bad if you have allocated 40% to the SGA already.........
The really cool thing about AIX is you can do this on the fly and you don't need to reboot so when you go live you juggle until you get an optimal setting and then monitor.
In the end you may just have to add memory.

How to decrease the size of a table

Hi ,
I have dropped a table on UI ... By default this table wont have any data .What i want that i should be able to decrease the size of table.
I want that we should be able to show only 4-5 rows and have a scroll bar if we have more records.

you need 16 pixel for each row, 14 pixel for the non-wrapped table header, and 16 pixel for the horizontal scroll bar, if it is displayed.
so for your case you need to display 5 rows
set the <b>inlineStyle</b> for your table from the property inspector to
inlineStyle="height:110px;"
<b>Thank to Frank Nimphius for his book</b>

How to decrease font size in the List with Icon and Subcontext

Hi , please help me with decreasing the size of font in List View.
please refer the below link
http://postimage.org/image/q0blmxf67/
thank you.

Nihar Narla wrote:
HiPlease read the FAQ and forum sticky threads (if you haven't done so already).
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
please help me with decreasing the size of font in List View.The presentational aspects of APEX applications are controlled using a combination of HTML and CSS via themes and templates. The basic answer to controlling font sizes is: use CSS. It's not possible to be more specific without the information detailed above.
please refer the below link
http://postimage.org/image/q0blmxf67/
Instead of posting screenshots on dubious sites popping up bizarre images, create examples on apex.oracle.com as described above.

Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

Welcome to Apple Support Communities
"Other" refers to OS X files, caches, downloads, documents. See Other in this website > http://pondini.org/OSX/LionStorage.html
I would not worry about Other because they contain files that you need, but if you want to decrease the size, start deleting downloads and documents

Can we decrease the size of existing datafile?

Hi,
can we decrease the size of existing datafile?
Thanks,

It is a very nice script.
But it does not deal with something that appears to be being 'pushed' by some contributors (OK, one, really) to this forum as a suitable 'fix' for some performance problems: using multiple block sizes in one database. It's not surprising the script doesn't deal with this, though, because Tom Kyte has never particularly approved of using multiple blocksizes like that.
Being specific, the script at Ask Tom queries for the setting of db_block_size parameter and uses that to work out what a datafile can be shrunk to. If you have datafiles using non-standard block sizes, however, then that script will not work correctly for them.
It's always potentially dangerous making use of 5-year old scripts found on the internet, even somewhere as good as Ask Tom.
It's also a good demonstration as to why, for at least one reason, it's potentially dangerous following Mr. Burleson's advice on multiple block sizes.

Twice decrease in size of Sun Studio 12 Update 1 in cmp-on to Sun Studio 12

Similar Messages

Maybe you are looking for