Twist S230U Mobile Broadband - Driver not recognized

hello,
I tried installing the driver for the ericsson module, but the device doesn't appear in the Device Manger list after installation. thus, I canot use the 3g sim card I own, and it's kind of annoying.
I saw that some users experienced the same problem, but never got a solution. I installed all the drivers I could find for windows 8.1, and it still doesn't want to work.
maybe it's a driver conflict, maybe I did something wrong. anyway, I can't figure it out. did you experience the same issues?
btw: I don't know if it has a WWAN card, or if it needs one, because I bought it refurbished.

thank you for all your help

Similar Messages

Help needed - External mobile hard drive not recognized by my iMac

Hi, i received a Freecom Mobile Drive XXS 250 GB USB 2.0 today, after plugging it into my iMac, i am finding that nothing is showing up, and it isn't being recognized at all.
I've tried connecting it via all the USB ports, i have tried connecting it and disconnecting other cables (like speaker + printer cables) and it's not working. I'm not all that computer literate, but after scouring the internet for hours i understand the problem could be that my USB ports are 1.1 and a bus powered hard drive might not get the sufficient power from them?
I have looked at the system requirements for the hard drive and my iMac apparently has all the requirements this needs to work. I have checked Disc Utility and the external hard drive isn't even showing up there. I thought i might have had to re-format the drive, but i checked and it is already FAT-32 so should be ok?
Very puzzled, and am out of ideas on how to get this to work (need to transfer files quite urgently - want to upload some new software and don't want to risk losing the files on my internal hard drive, as my computer is getting about slow and unreliable also have the problem of my cd burner now being defunct for some reason, but thats unrelated to this hopefully)
Has anyone got any ideas on how i could get this to show up on my computer? Any info will be much appreciated!
Regards, coby x

Hey coby,
Well thanks for the star. Not sure I deserve it.
i then tried connecting the drive to each USB port again, and voila! i have found one it works in. I guess my computer's ports must be a little worn.
Hmm well try looking inside and see if there's some smutz in there, if the contacts are dirty or bent or worn.
i was starting to think i would have to go out and get a USB hub to give it some more power.
Is it powered off the USB? If so that actually might be a good idea since that puts a lot of strain on the connectors. Even if it's self powered it might be a good idea since it would take the strain off an obviously flakey USB.
richard

Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
Thanks!!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite L775D
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number
Current user is not an administrator.
The current local date and time is 2013-01-08 11:16:27.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD Radeon(TM) HD 6520G
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod mini running firmware version 1.4.1
Serial Number: JQ******S42
<Edited By Host>

OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista

Can some one help me with diagnostic test result " apple mobile device driver not found"?

I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address:             192.168.1.3
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Thu Jun 28 15:17:19 2012
Lease Expires:       Fri Jun 29 03:17:19 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help.

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Vista and ipod nano driver not recognized?

My computer (vista) won't recognize my ipod nano second generation. It tells me driver not recognized?
So when I plug in my ipod a little screen pops up and tells me that No drivers are installed for this device. Where can I download a driver
Thanks,
[Income For Life|http://www.website.ws/freedombucks]
Message was edited by: komrad

Apple has release a new version of iTunes 8, in responce the issues with Vista.
1.Unistall iTunes via StartMenu\Control Panel\Programs and Features
2.Delete all previous iTunes installers.
3.Download iTunes 8 from the Apple website.
4.Makes sure you close Outlook and Explorer and all non-essential programs, as it seems to prevent the install at certain points.
5.Install iTunes 8.
6.After the Install is complete, Open iTunes 8 before attaching your iPhone.
7.Unlock your iPhone if it is lock with a pass code.
8.Attach your iPhone, after a few seconds you should see that it has installed a driver for your iphone, then the iPhone will appear in iTunes.
I hope this helps, as I did spend some time with this issue myself.

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Drive not recognized - new issue...help please

I am replacing a 120 GB drive with a 250 GB one to give more space for video files. On reboot, I get the message: You have inserted a drive not recognized...etc...with the choices to initialize, ignore or eject.
Then I notice that the drive on the same bus (in the bottom of the tray) is not seen on the desktop. It was in two volume partitions and was also a 250GB. Big mystery. So I remove the new one and connect just the older drive. No luck, message says ...a drive not recognized...etc. So then I change the jumpers twice - same results - and I remove the jumper...same thing. I see this drive in Disk Utility represented by a number and size (232 GB) but not by the volume names. And when I try to verify or repair, the option is greyed out (yes, I booted to the install disc and went to Disk Utility, as per instructions.
This disk has data on it I need, and it's not backed up. All I did was unplug the connectors and then replaced them as before. So please, tell me how I can restore this one. I could remove it and put it in an external FW enclosure and then see if it shows up, but I don't want to take chances. Worse case scenario is a data retrieval service - and I'm almost certain I shouldn't have to do that as this is a healthy drive.
Any suggestions very gratefully appreciated, thanks!
Keith

Tom, I tried every one of your suggestions: set the older drive (Seagate) at P4 and first connector on IDE ribbon to cable select and the new drive (Hitachi) in tray just above it at P5 - end connector on ribbon also to cable select. Result: two dialog boxes for both drive on reboot "You have inserted a device not recognized..."
Then I tried slave on the Seagate and Master on the Hitachi...same result as above.
Then I tried alternate Master and Cable Select configs. on the Hitachi for 15 or 16 pin..whatever that is...but was printed on strip on drive. No go.
I think it must be another issue here than jumpers...although that may have something to do with it. When I installed a new drive in my Quicksilver I never got the Device Not Recognized dialog...it either saw the drive with all data on it or it didn't, until I set the jumpers correctly, as directed for that incident.
What bothers me is that when I removed the new Hitachi entirely and reconnected the old Seagate as the only drive on that cable, either with jumper set to CS or M or S I am still getting the dialog.
Any other solutions, please.
K.

USB flash drive not recognized on desktop or disk utility

I see a number of similar threads to this but nothing solves this problem. Any help will be greatly appreciated as I am about to go crazy!
I have 3 USB thumb drives that all worked 2 days ago - now only one does. I have tried all drives in multiple ports and the same result. I have restarted the iMac (2009 Yosemite) a number of times and the same result.
This came about attempting to create bootable USBs with each of these. I was struggling with the process on my mac so took 2 (brand new 16GB PNYs) to a PC created the live boot USBs and they booted fine on the PC (knowing this wouldn't boot my mac). I did however plug them into my mac and they were recognized. I finally found success creating a Ubuntu live boot with my old USB. With that success I wanted to try with one of the new USBs on the mac.
Here is what I did:
1. Using Disk Utility - Reformatted the drive 1 partition MS Dos FAT 32
2. In Terminal unmounted the drive and ran a dd command to copy the linux .img file successfully
3. Box came up saying drive not recognized and selected to ignore (this happened on my old one that still works also)
4. Ejected drive from terminal
5 Restarted mac and attempted to boot from USB without success.
After this the 2 new USBs were no longer recognized in any usb port while the other still is. They do not show on the desktop nor in Disk Utility. I checked them on the PC and they are still both recognized and showing the FAT 32 format.
Help please!

Thank you for the reply. I found some time to go through this process a number of times without success
Any other suggestions?

F3507g mobile broadband driver - Windows 7 - and Cisco Vpn issue

Hi All,
After 3 days trying to install / update latest drivers on my X200/ Windows 7 / 32b, it seems now that my F3507g is now installed correctly…
I can go the a connection over internet and ping some servers BUT when I initiate my Cisco Vpn, ( working perfectly with my Ethernet connection and my Wifi 5300 AGN ) the connection is ok but no incoming or outgoing traffic !!!
Any idea on how to solve that issue ?

Yes, this is a problem with the IPSEC VPN NDIS driver binding your Mobile Broadband driver. You need to read this article and it is explains why and how to work around this issue:
http://www.customsoftwareframeworks.com/blog/fix-vpn-problems-cellular-win7
Good luck

HT5639 after The Boot Camp for Windows 8? DVD Drive Not Recognized or Reading CD/DVD

after i made The Boot Camp Setup for running Microsoft Windows 8? DVD Drive Not Recognized or Reading CD/DVD

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

Apple Mobile Device Driver not found. ...

Nor Itunes neither my PC can view my Iphone, what is more, it is completely discharged.. Here's the diagnostics...
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver not found.
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012B2100AAF8C28
Current user is not an administrator.
The current local date and time is 2011-06-30 20:40:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220M
**** External Plug-ins Information ****
Plug-in Name:          MiniLyrics Visualizer
Plug-in Loaded:          Yes
Plug-in Version:          0.8
Plug-in File Version:          Unknown
Plug-in Path:          C:\Program Files\iTunes\Plug-ins\iTunesMinilyrics.dll
Plug-in Name:          Last.fm AudioScrobbler
Plug-in Loaded:          Yes
Plug-in Version:          1.0.4
Plug-in File Version:          3.0.4.0
Plug-in Path:          C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
Genius ID: 46b8dbeb48d2ea73f185160d9ef3debd
**** Device Connectivity Tests ****
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Note: I simply unnistalled all apple programms, when my Iphone had errors, and installed the newer version... Maybe it is the reason why my Iphone is not being seen...

I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help.

Mobile Broadband Unit not found for T400 WAN

Hello,
I've got a Lenovo T400 27658JG with Win 7 64bit and I try to activate my Mobile Broadband Unit.
I've loaded down the driver: Lenovo Mobile Broadband Version 3.5.0011 and the ericson and AT&T driver (which worked properly on XP)
When i'm launching the exe I got the following message:
Mobile Broadband Unit is not found.
It would be nice if somebody could help me
Thanks in advance
Solved!
Go to Solution.

jhs wrote:
I've got a Lenovo T400 27658JG with Win 7 64bit
This is the configuration for a 2765-8JG
P8700(2.53GHz), 2GB RAM, 320GB 5400rpm HD, 14.1in 1440x900 LCD, 256MB ATI Radeon HD3470, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, Modem, 1GB Ether, UltraNav, Sec Chip, FPR, Camera, 6c Li-Ion, Win7 Pro 32
WWAN option means that it has the SIM card reader and WWAN antennas fitted but there is no WWAN card fitted, so that is why the Mobile Broadband Unit is not being found!
Cheers,
Bill
I don't work for Lenovo

Mobile Broadband Connect not working on x301

Hi
I definitely cannot get mobile broadband working on my UK x301
I have a fully updated system with all the Win7 Drivers (using both System update 4 and further manual downloads) and I found a Win 7 version of Mobile Broadband Connect however when loaded it hangs on Initialising... for ages and then complains that "the sim card present on the system cannot be read"
Can anyone help please?

That has been on issue ever since RC1. The Ericsson Broadband Modem only seems to work in specific combinations of older drivers. Also not every access connections version seems to behave nicely in combination with it. My success rate in configuring those has been approx 50% and I gave up.
I did manage a 100% success rate though with all most recent drivers + the specific 7uw706ww ericsson package from the beta website.
There's one catch though. This driver seems to be capped at 384Kbps e.g. stuck in UMTS mode.
For me that's enough to last until proper drivers come out, but it is higly irritating.
Lenovo Premium Business Partner
X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

Mobile broadband (un2430) not working with Windows 10 on Folio 9470m

I have had Windows 10 installed on my HP Folio 9470m since October last year (insider program). One thing that I never been able to get to work is the mobile broadband device (un2430). It simply says "Radio off". All attempts to re-install driver (which shows as "working"), disable/enable the device etc etc just leads to same result, that the "Radio is off".I googled this a couple of times and found that other users have the same problem. Also colleagues of mine with same model has also the same problem. It works just fine under Windows 8.1. Anyone has a workaround? I was really disappointed when W10 was released that HP did not update the drivers-page with W10 drivers:http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5271102 How can I find out when/if HP will release W10 drivers, including support for mobile broadband, for the HP Folio 9470m?

Thank you for your reply. I've tryed several SIM cards, and arrived to the conclusion that it doesn't work with portuguese operator TMN (all the SIM i've tried from TMN lead to the same result)!
I guess that there is some misconfiguration on WM config files. I found one xml with default configuration for worldwide carriers, and maybe it is possible to change some of those parameters to make it work... I just don't know wich one!
Maybe I'll have some luck, of someone reading this, and that is able to give me a tip to solve the problem.
The SIM card just work well on a 3G usb stick, or even in a celular phone!
Thank you again.

Twist S230U Mobile Broadband - Driver not recognized

Similar Messages

Maybe you are looking for