Twist USB port after sleep

I regularly use both USB ports on my Twist. Right for a mouse, and left for iPod/memory drive. Sometimes, after my Twist comes out of sleep mode, the left USB port doesn't work. It won't recognise USB drives or my iPod. The right one is fine. The left port still works during sleep mode, as my iPod still charges. Does anyone else have this problem and is there a fix?

Hi, j11560
I did some research and found that there is a BIOS update available for your system. The update was released earlier this month, so it is fairly recent. Downloading and installing this may help your issue.
Best of luck. Let me know how it goes,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

How to reset USB port after too much power draw message

Hi everyone,
I have the brand new MBA which I use for work and I tried connecting a USB hub yesterday to it. Once I did the computer immediately shut itself off and after doing some HW troubleshooting for a bit, I unplugged, got back running and saw the error message:
I have done all sorts of reading online and just can't get my USB ports to work at all anymore. I've tried plugging in my apple keyboard directly to both ports, and tried memory sticks but no luck.
Beyond that I have tried the steps for resetting the VRAM (or whatever it's called) and tried an SMC reset (though for that one there are several sets of differing keystroke instructions). I have also had the computer "unplugged from power all night (and in sleep mode) but nothing.
Can anyone please help me? I am fairly computer savvy so do want to try quite a bit more before I take it to an apple store as I just don't have time to deal with it.
Thanks

i had the same problem after leaving my macbook pro overnight with the printer cord plugged in. even though i had unplugged the printer, computer still showed the message. suggested reset didn't work. but what did work was:
1) shutting down computer
2) turning printer on and reconnecting to macbook with macbook still off.
3) powering up macbook
4) removing printer USB cable AFTER macbook fully booted up.
voila, no more message, all USB ports functioning!

IMac Retina shuts off USB ports when sleeping

I have a new iMac Retina i7 with 32GB RAM running Yosemite. Approximately 60% percent of the time, when the iMac goes to sleep, it shuts off all of the USB ports. This includes dumping hard drives without properly ejecting them, as well as shutting off powered USB hubs. Switching the drives and hubs around to different ports does not help the problem, and it appears to be becoming more frequent. Any suggestions would be welcome.

I too am having hub issues with my 5K iMac. I purchased an Amazon Basics hub, that never worked at all. I returned it and got one made by vantec. I have two external hard drives connected to it, and they always are recognized after sleep or restart. But other things get dropped, like my two printers. I seem to be able to resolve the dropped hub ports by ejecting my external hard drives and then unplugging the power to the hub, then reconnecting the power. When i do, all the indicator lights come on again, and things work.
I am working with Vantec about this issue, they have been terrific by email, and they are offering to replace the hub. But now I am wondering if something more basic is wrong, like this SMC reset that has been mentioned in this thread. I was about to ask if that was hard to do, but I just looked at the link provided by Ralph, and doing it is easy-peasy. I will give this a try, and try to remember to report back.
thanks, Peter

No Audio or USB Ports after Recovery on Satellite L505D-S5983

I have recently done a system recovery with disks I created when I originally got my Satellite L505D-S5983. Which put the laptop back to an "out of the box" state...supposedly... I have been asking on a Microsoft forum for help with my problems, with limited luck.... It is still not working. I'm pasting my original posts here hoping that maybe somebody on here can help me.
POST 1:
My Toshiba Satellite L505D is running 32-bit Windows 7 Home Premium. After about 4 months of downtime I recently started it back up. There were roughly 37 updates to install when I turned it on, as expected. The updates were downloaded and installed, but when the system was restarted the system froze as soon as the desktop loaded. I booted multiple times and every time it completely freezes immediately after start up. I am not even able to open the task manager (ctrl+alt+del). They system boots perfectly fine in safe mode, and I ran what diagnostics I could find and nothing shows up....according to Windows everything is fine.
After Going through this multiple times, I got sick of it and decided to do a system recovery. Not a system RESTORE...it was a system RECOVERY. The HDD was completely wiped, and the system was supposedly returned to its original form as it was out of the box. Getting my hopes up as it finished its process... The system worked fine through the initial setup (language, time, etc.) and then as soon as the desktop loaded it froze again!
So here I am with a completely wiped HDD (except for the factory toshiba software), and a Windows OS that will only work in safe mode... I would like to avoid reinstalling Windows, I don't have any disks or anything. So any help would be appreciated
P.S. let me elaborate on what I mean by "froze". The system is completely non-responsive. No cursor movement at all, touchpad, keyboard, USB ports, nothing. When I did the restore the cursor, touchpad and keyboard worked through the initial settings only. Even when the desktop is loading i get movement for a second or two before everything freezes.
REPLY I RECIEVED:
Hi,
Since the computer is working in safe mode, I would suggest you to start the computer in clean boot to check which third party program is causing the issue. To configure your computer to clean boot follow the link
http://support.microsoft.com/kb/929135
Note: After you have finished troubleshooting, follow step 7 in the article to boot to normal startup.
If the issue does not persist in clean boot then refer ‘Step 3’, ‘step 4’ and ‘step 5’ from the following link to narrow done the issue and find out which service or startup item is causing the issue.
MY RESPONSE POSTING MY CURRENT ISSUE:
Thank you, and yes that's exactly what it was. It turned out to be an ATI program for my AMD graphics card that was not installed properly. It makes me wonder if I had to do the recovery in the first place lol.
However now I have a whole other issue. Windows is now telling me that "No audio output device is installed".....
In device manager the yellow "!" is there (High Definition Audio Controller), it tells me that it is not working....yet it says that the best drivers are installed! So yeah...I have no audio now. The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
//--> Toshiba Satellite L505D-S5983_AMD Athlon II Dual-Core M300 2.00 GHz_3GB RAM 32-bit OS   <--//
RESPONSE FROM SOMEBODY ELSE:
Hi,
Check with Toshiba Support, their on-line documentation and drivers, and ask in their
forums about known issues.
Toshiba - Forums
http://laptopforums.toshiba.com/
Toshiba - Contacts
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact
Toshiba - Drivers - navigate to your model
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download
Toshiba - Support
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
========================================
First run SFC /scannow and checkdisk (chkdsk) as the cause of these issues might
be some sort of corruption.
Start - type in Search box - CMD   find at top of list - RIGHT CLICK - RUN AS ADMIN
sfc /scannow
How to Repair Windows 7 System Files with System File Checker
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
Then run checkdisk (chkdsk).
How to Run Disk Check in Windows 7
http://www.sevenforums.com/tutorials/433-disk-check.html
Then use this troubleshooter :
References to Vista also apply to Windows.
Fixing a customer problem: “No Audio Device is Installed” when launching sndvol on Windows Vista
http://blogs.msdn.com/b/larryosterman/archive/2009/01/06/fixing-a-customer-problem-no-audio-device-i...
Also update or re-install the driver.
Control Panel - Device Manager - SOUNDS - look for HD Audio - Mine says RealTek High
Definition Audio (that is an example and yours may have an entirely different name/maker).
Write down description make and model - double click on it - drivers tab - write down version.
Now Click UPdate Drivers which may not do anything as MS is far behind certifying drivers.
Then RIGHT CLICK on it and UNINSTALL - REBOOT - this will rebuild the driver stack.
1st go to system maker's site and look for latest driver Download - SAVE - go to right click on
and RUN AS ADMIN (This is your fallback.) REBOOT after each driver installation.
NOTE : Sound drivers often rollback so check the version after installation and the
reboot to see if the version you installed is there, if not repeat the install - reboot
until it is. It can take several tries depending on how many rollbacks it does.
Then do same for Device Maker's site.
Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm
Installing and updating drivers in Windows 7 (updating drivers manually using the methods above
is preferred to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html
Error “the Audio Service Is Not Running” When Opening the Volume Mixer in Vista
http://www.winhelponline.com/blog/error-the-audio-service-is-not-running-when-opening-the-volume-mix...
Also Right Click Speaker near clock - Playback Devices - right click in the box area -
check Show disable and disconnected devices. Highlight speaker and on the lower
Right click Properties check settings for Device Usage enabled and so on. Also do
same for Configure on Lower Left of that box.
In Control Panel you can also look for an Audio Manager along with the Sound Settings.
Open the Playing Audio troubleshooter
http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter
Problems with sound and audio or no sound - a Mr Fixit
http://support.microsoft.com/gp/no_sound
No sound in Windows
http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows
Tips for fixing common sound problems
http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems
Speakers and other audio output devices
http://windowshelp.microsoft.com/Windows/en-US/Help/a43f3a31-6d9f-49d1-be22-e2f47b8b1f2c1033.mspx
How to Enable Hidden Audio Devices in Vista
http://www.vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html
Hope this helps.
===========================================================================================
Ok...so I have installed all of the appropriate drivers that I thought I may need from this website. I have tried ALL of those system analysis programs that were suggested. Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
I would be more than willing to run the recovery again if I knew that I had everything I actually need... When I created my original recovery disks it created a third disk with "apps and drivers". I installed all of them...and still here I am... And I haven't even STARTED on my USB port issue yet...those don't work either, and they don't even show up in my Device Manager...sigh...
And please, a response that doesn't look like an automated response to try and sell software like the last one I recieved from the Microsoft forum would be appreciated
Thank you for your time, and apologies for the lengthy post, but I wanted to provide as much info as possible.

Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
   Realtek Audio Driver for Windows 7 (32/64)
-Jerry

IPod touch won't work with car's USB port after sw update

I've been using my iPod with my 2011 Honda CR-V's USB port to play my music through the car's audio system without issue since I bought the car. This stopped working after the latest iPod software update a few days ago--the msg on the audio screen says it's now "unsupported". Is there anything I can do to fix this without a full restore? Why did it change? Thanks for any help.

Hey there,
Glad to hear we're getting closer. Looks like you're connected to the network, just not able to utilize it's internet connection.
Let's check your iPod's IP addres. Tap Settings > Wi Fi and look for your network. To the right, there's a blue circle with a white arrow in it. Tap that circle. If the IP address starts out with 169.x.x.x, it is a self-assigned IP address. Since it came from the iPod, and not the router, it can't be used.
I would recommend resetting your iPod's network settings:
Settings > General > Reset > Reset Network Settings
When the iPod restarts, reconnect it to your network and try Safari again.
If it still isn't working, try powercycling your router and resetting those settings at the same time.
1. Turn off the router
2. Reset the network settings again, as indicated above
3. Turn the router back on
4. Reconnect the iPod to the network
If it still isn't working, let's check your iPod's software version.
Settings > General > About
If you've upgraded to 2.0, the latest version is 2.0.2. If you haven't upgraded, the latest version is 1.1.5. If you're not at either of those numbers, connect the iPod to your computer and use iTunes to check for software updates for the iPod.
Regarding the router settings, I'm not familiar with your router manufacturer. I'd check their website for instructions on that. I think at this point you wouldn't really need to change any settings, but just check for firmware updates.
CG

IMac has stopped charging via the keyboard USB port when sleeping - why?

I have a 2008 model 2.8GHz iMac with standard size aliminium keyboard. Historically, I have plugged my iPhone in to the USB port of the aliminium keyboard via the standard iPhone cable and when I put the iMac to sleep it continues to charge the iPhone.
However, the keyboard USB port no longer keeps charging the iPhone when I put the iMac to sleep. The USB ports on the back still do, but not those on the keyboard. Has anyone else encountered this and found a solution?

Although I have never connected my iPod to the keyboard in the past, I can confirm this behavior. Previously my Mac was an Early 2006 iMac Core Duo with the white plastic Apple Keyboard, so the USB hub in the keyboard was USB 1.1 and not recommended for iPods. Now I have a new Early 2009 Mac mini with the aluminum Apple Keyboard with Numeric Keypad with the USB 2.0 hub.
I can confirm that, based on the messages/symbols displayed on the iPod;
1. an iPod connected to the USB 2.0 hub in the Apple Keyboard charges when the Mac is awake.
2. an iPod connected to the USB 2.0 hub in the Apple Keyboard is ejected and no longer charges when the Mac is asleep.
3. an iPod connected to a 3rd party, non-powered, USB 2.0 hub connected directly to a Mac USB port is ejected but continues to charge when the Mac is put to sleep.
4. an iPod connected directly to a Mac USB port is ejected but continues to charge when the Mac is put to sleep.
However, Benjamin, if you read the the 3rd comment from the bottom, of the discussion thread to which you have linked, the poster states that Apple engineers have confirmed to him that;
1. with Mac OS X 10.5.6 a new power management scheme was implemented.
2. an iPod connected to the USB 2.0 hub in the Apple Keyboard is ejected and no longer charges when the Mac is asleep, is now correct behavior under the new power management scheme.
The drawback is that folks in that thread are reporting that not only does the iPod not charge, but that it is drained of power.

Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade

Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.

I don't use FLIP, but if you get no other help here,
consider the following ideas.
If neither restarting your Mac
nor reinstalling OS X fixes your
problem, you might find some
help if you search or post in the
CISCO forum where Flip users post.
Message was edited by: EZ Jim
Mac OSX 10.10.1

Accessing usb ports after installing virtualbox

I have recently installed virtualbox and subsequently Windows 7 on my Macbook pro. My main purpose was to be able to use CorelDraw. However when I switch to windows using Virtualbox, I cannot access my USB ports or my CD Drive. Has anyone had the same challenge and how do I overcome it? I am running Mountain Lion on my Pro.

I'd suggest you take this issue up in the forums for VirtualBox:
https://forums.virtualbox.org
You'll be more likely to get help there (particularly since the forum you posted in here is for questions about the communities themselves).
Regards.

Losing USB connections after sleep

Brand new iMac running 10.9.3 using a Anker 13 port hub
After wakening from sleep mode (this is usually observed after long periods of inactivity) I am finding that devices connected by USB are inaccessible. Reconnecting them does not correct the problem, only a restart will restore them.
Tips or thoughts appreciated

Hi vegasvics,
Welcome to Apple Support Communities!
Take a look at the article linked below, it will provide tips that will help you isolate or resolve the issue with the imac and USB hub.
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
If a USB device isn’t working properly, make sure you connected it to your computer correctly, plugged it into a power outlet if it has a power cord, and installed any software it needs.
Make sure the USB device’s cables are properly connected.
Make sure you installed the latest software for your device. Visit the manufacturer’s website for any updates.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord, try plugging the device directly into your computer or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If the device is connected to a USB hub, make sure the device and the hub are the same speed. Connect USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and connect USB 1.1 full-speed or low-speed devices to a USB 1.1 full-speed or low-speed hub.
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device that causes the problem, review its documentation for further troubleshooting steps.
Open System Information, then click USB. If the device appears but does not work, the problem might be with the device. Review the device’s documentation for further troubleshooting steps.
-Jason

10.7.5 Have to Force Eject Ext USB Drive After Sleep

Macbook Pro, Late 2011 (USB 2)
I'm finding that I always have to force eject two different 1TB ext USB HDD's after the computer sleeps. Sometimes I think it's even only after the drive spins down for a while.
Most often it's after I let Time Machine backup my laptop overnight.
I thought it was just this drive, until I got a new drive and it has the same problem, though it's not used for backups.
I've been unsuccessful trying to determine what may be using the drive as the eject error states is happening, but maybe that would help me understand if this is a legitimate problem or a bug. Force ejecting has had no noticeable effects, though it makes me extremely nervous on a backup volume. The other disk is a huge sample library that's not written to unless I add samples, so I don't force ejecting that one as much.
In searches for this problem I have only turned up drives that eject spontaneously.
Thanks for any help.

OK, so a new search in here, not via google, found this:
sudo lsof /Volumes/{volume name}
result:
COMMAND PID   USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
mds      67   root   21r   DIR   14,6      544    2 /Volumes/Backup_1TB
Finder 152 andrew   55r   DIR   14,6      204   88 /Volumes/Backup_1TB/Backups.backupdb
So it looks like spotlight or finder. I'm not browsing the backup volume, but it looks like it thinks I am. I know there are lots of spotlight issues, too, but I;m not sure if that's the case here.
I did try:
mdutil -V /Volumes/Backup_1TB/ -s
/Volumes/Backup_1TB:
    No index.
/Volumes/Backup_1TB/Backups.backupdb:
    No index.
So it would appear that spotlight isn't doing anything...

Twist - No cursor after sleeping

At times when I wake the Twist up, I do not have any curser on the screen! It doesn't matter if I use a mouse, trackpad or the touch screen. The cursor just isn't showing. If I put the machine back to sleep and then awaken it in about a minute, everthing is usally fine (not always)
It's just like the cursor is invisiable. I can get things to highlight just by moving the mouse around.
Help! Please

Hi, rogerkuehne
I would recommend makng sure all the drivers are updated and see if that helps the issue, with the BIOS and the mouse and keyboard drivers being the most relevant. Make sure all are updated, however, to ensure maximum compatibility. All drivers for your system can be found here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

USB Ports don't work after sleep mode on Windows 7 Pro 64 bit

I have been using my laptop for about a month without a problem, but over the last week or two I have had a problem where I lose access to all of my USB ports when resuming from sleep mode. If I go into hybernate or restart the computer, the ports
miraculously return. The techs at the manufacturer can't figure it out and wanted me to do a full system restore, which is a little too drastic a solution! The only real thing I can connect it to, is I had to use Virtual PC (XP) around the time this
started.

Hi Greg,
Microsoft has been fixed this problem, but it is not successful with all PC/Notebook manufacturers. So, the OEM developers itself started giving patch for this issue. I have seen the patch upto Windows Vista version. Lenovo, HP, Dell and other people
are providing this patch. Sony is providing this patch for some selective models. Go to sony support, enter or auto detect your model and check for the update. With Windows 7 SP1 your USB drives should work properly.
Anyway, check the below sony support link to understand how to wake up a USB drive after sleep in Vista, Do the equivalent modification in your Windows 7 PC registry. It will work for you.
http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--supportmicrosoftcom-kb-928631&sliceId=&docTypeID=DT_MICROSOFTKB_1_1&dialogID=268806033&stateId=1%200%20268804250
Hope this will work for you.
Aloysius Jegan

Left USB-Port dead after wake from sleep. Just restart helps.

I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
I'm really angry now.
When will Apple solve the most urgent problems in Leopard?
Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
Come on already Apple. This is a SERIOUS, SERIOUS problem.
Fix it.

My USB ports get disabled on my iMac when in sleep mode

I can't seem to figure this out. When waking from sleep mode, all my USB ports are disabled. I first noticed it when the USB speakers stopped working, but none of the ports work, to the printer, or to the scanner. The only way to reactivate the ports is to do a restart. I did a virus scan of my entire HD but it found nothing. I have not installed any new software recently so I'm stumped. I'm hoping this isn't a hardware issue.

Sometimes, a computer has a problem remapping your USB devices after sleep. Disconnect all of your USB devices: printers, mice, scanners, everything. Wait a minute. Reinsert the devices. This resets your USB map.

USB power after system shutdown. How?

Hi there.
I have z87 Mpower Max.
My question is how to make system provide power to all USB ports after shutdown?
I read similar topic of enabling USB wake up on S3, it work but sometimes when I plug my Android phone to charge, my PC turns on. not always but sometimes.
If I disabled the USB wake up, no power to the ports.
I had built Asus, Gigabyte , Asrock, from 2008 they all had this feature "ring on power" on bios to enable/disable USB power. Even with the cheapest models 75$
Did MSI miss this? That would be so lame.
Note:
I don't want 2 ports only.
I'm talking about shut down not sleep.
Thank you.

Quote from: JLio01 on 12-December-14, 10:53:47
If you want to charge after shutdown without any risk of waking up the system, there's a red USB connector allows USB charging under S5 mode.
Wake up event resume from USB enables your USB to wake the system up, so the system might be waken up, it's NORMAL. I tried on my X99 mobo by enabling USB wake up and all the rear USB ports(I don't use front ones) are chargeable for my android phone, and no system turning on from S5 by charging my phone so far.
Thanks JLio01
I did and my system woke up
Missed with bios setting, couldn't get it to work.
So now when my system turns on after plugging my phone I press power button to shut it down at post.
This is really embarrassing and lame from MSI, the first MB in 8 years that lack this important feature.
Do you think I can contact MSI support to tell them to include this on next bios?
I know it's possible with the MB, but not sure if they will care.

Twist USB port after sleep

Similar Messages

Maybe you are looking for