Twitter for iOS 5 on older iPad

Keep trying to add native Twitter app from the settings function but get error message about needing newer version of iOS.  Can't find version compatible with iOS 5.1.1 in app store or on web.  can always use Web version through browser, but would prefer the app ... suggestion, comments...

You have posted in the wrong discussion, ask this in the iPad discussion.

Similar Messages

  • HT4623 How do upgrade my iOS on an older iPad?

    How do I upgrade an older iPad so I can get the directtv app?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • Removal procedures for iOS 8 from an iPad

    I need to remove iOS 8 from my iPad.  My iPad is pretty much non-functional at this time.

    There is no Apple supported* way to downgrade iOS versions, or roll back updates.
    What fixes have you attempted for the issues?
    Have you tried to reset the iPad?
    Have you tried to Restore it as new to refresh the installation?
    Its possible something went wrong with the installation, and its causing these issues?
    To Reset the iPad hold down the home and Power/sleep buttons until the Apple logo shows up.
    If that does not fix it, try a restore:
    Use iTunes to restore your iOS device to factory settings

  • Facebook and twitter for ios 4.2.1?

    hi, i need help for install facebook and twitter in my ipod touch 2G IOS 4.2.1

    That's not true. If you have a mac and you use Time machine. you can restore a previous version of facebook to iTunes and resync your device. Here are the steps:
    Go into iTunes opt+click (right-click) on Facebook. "Show In Finder"
    Open time machine. Go back in time until you find version 411.0 (or earlier)The file name is called "Facebook 4110.0.ipa"
    Restore it to desktop. Go into iTunes and delete the current app.It will give you a warning that it will delete it from all current devices. That should be okay, just re-download it
    Drag and drop the file from your desktop into iTunes
    Sync your device.
    I KNOW this works... as i literally just did it and everything turned out just peachy.

  • Debug/Run for iOS simulator and Retina iPad

    Even in the latest beta 2 releates, the dropdown for "Default Device" includes "iPad", "iPhone", "iPhone (Retina)" but does not include "iPad Retina".  Seems like adding the "iPad Retina" woud be a matter of passing the correct flag to the iOS Simulator and should be quick and easy?  When can we expect this?

    Hi ,
    Its a valid request. Please log an Enhancement request using the below link.
    http://bugs.adobe.com/jira/login.jsp
    Meanwhile you can try this workaround:
    1.Open iOS simulator.
    2.Choose Hardware->device from iOS simualator menu to the device on which you want to test your application.
    3.Launch your application on iOS simulator from the Flash Builder.(Selecting the device on Flash Builder has no effect if the simulator is already running).
    Thanks,
    Sanjay

  • IPad 2 update for iOS 8 crash my iPad 2, iPad went into recovery mode I lost all my stuff that was on it why that happen ?

    I Have the iPad 2, download the update iOS 8, but when I tap to install it, it crash my iPad 2 and made it go into recovery mode, why did that happen ? If the update wasn't for the iPad 2 why send the software  I mean it crash my iPad 2 I have no song no apps it's all gone, and I don't understand why the update crash my iPad like that, my iPad 2 mite not recover or update because of the new iOS 8 update, I'm very upset please can someone give me a answer for this.

    yes i I would of been satisfied that I drop it, and broke my iPad then the update crashing my Ipad 2.  Because at least I know I did it, the apps I purchase iI'm not that upset about, but there's one app since I had to reset it to factory as new and update,  I didn't want to reset it to factory setting, but I had no choice. I lost a lot of memerie. lesson learn next time I will update all my stuff on my PC to prevent this happening to me again.  Never had a problem with pass update it was this update, that teach me a lesson, u can not always be computer free when it come to update any apple device.

  • Keynote is an amazing tool for preparing presentations.However, keynote for iOS devices(e.g. iPad) doesnot have the simple way to add audio files in to the files.When we will have the update to add music files right into the keynote slide?

    I have been using Keynote for presentation slides to be used in conducting training sessions. Though, Keynote has beautiful interface with elegant transitions to animate, it doesnot provide any way to add audio or music files into the slides in iOS devices alone. I have been waiting for the update to add this very feature,but cannot find it yet.When could we have this upate?

    Send Apple feedback and tell them what you want. However, many app versions of programs are skinnied down, and that functionality may not be workable in the App version. Can't know until you suggest it to them however.
    Lower right corner of this page, the contact us link, give it a try.

  • Airport Utility for iOS on iPad

    Although my Airport Extreme and two bridged AP Expresses are oerating properly, Airport Utility for iOS on any network connected iPads cannot locate any of the Airport devices. The same version of Airport Utility works properly on any iPhones on the network and the Mac version also works.
    I've tried removing, downloading, and re-installing the utility from the iTunes App Store, but the iPads still cannot locate any of the three devices. All it can find is "Internet". I've tried on iPad 2, iPad Mini, iPad Mini 3 and none of them can see the Airport devices. On the other hand, I've tried the utility on iPhone 4s, iPhone 5, iPhone 5s, and iPhone 6 (all iOS devices running iOS 8.2), and the iPhones can all see the Airport devices
    The symptoms are pretty consistent and reproducible. In the past 4 to 6 months, Airport Utiity did work properly on iPad. I'm not certain which version of the app and iOS were current when it worked, because I don't frequently use the app, unless I have network revisions done on my Mac and need to check results later. Tonight, I did use it because I have a malfunctioning IP camera. I scanned the network with a third party network scanner/sniffer on iPad and it confirms that the network is intact.
    Basically, it's not iPad specifically, but it appears to be the Airport Utility running on iPad only, that has a problem locating the Airport devices. It seems to be a bug in the Airport Utility for iOS, as used with iPad. Has anyone else observed this?

    I have never seen it either.. I have no problem with the ipad to discover any airports in my network.. and there are loads of them.. nor seen people reporting it as an issue.. but you have sure got something interesting happening.. what version Extreme is it?? Do you have something unusual in the setup?
    If you are really brave or foolhardy.. save the existing setup.. and reset the main extreme to factory and redo the setup from the ipad.. I am pretty sure it will work as long as it gets first bite at the apple. (no pun intended).
    Keep all names short, no spaces and pure alphanumerics.. same for passwords but can be longer.. ie names <10 is good.. passwords 8-20 characters. Mixed case and numbers.
    I do notice that Airport Utility in ipad does behave differently (only slightly but it is there) cf the iphone. Some functions are missing in the phone version.. so I guess with the bigger screen the utility adjusts to how it works.

  • What do I do when I have done the up date for ISO 6 on my ipad 2 and it shows a iTunes logo and a picture of cord for plugging in my iPad

    What do I do when I have done the update for IOS 6 on my iPad and it gives my a blue iTunes logo and picture of a power cord?

    http://support.apple.com/kb/HT1808

  • HT1386 Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

    Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

    That is correct.
    You have an original iPad.
    iOS 5.1.1 is the end of the line - that is the latest iOS that model can use.

  • Get an older version of GarageBand for iOS (pre 2.0.1)?

    How do I get an older version of GarageBand for iOS (pre 2.0.1)? Other than this method :
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/app-store -downloading-older-versions-of-apps-ios
    I have been all over that article trying to figure this issue out. The problem for me is, my app store, my wife's app store, my friend's app stores, etc. all have updated versions of GarageBand iOS and we have updated iOS to 7. I can't downgrade to iOS 6 any longer. I've asked a friend to trade me his old iPad for my newer one! And on and on to no avail.
    Is there a way I can download a pre - 2.0.1 version of GarageBand iOS from a 3rd party? Can the file be placed somewhere and then onto my Mac via iTunes? I have contacted app store support about this. They offered to refund my $4.99, but cannot give me my also purchased (on a different account and updated there as well) old version of GB iOS.
    I have a compatibility issue between the latest GB for iOS and Logic Pro 9 on the Mac. LP 9 will not open the latest version of GB iOS. I cannot download LP 10 bc my 2007 MP is 32-bit EFI. I'm not comfortable w/ the hacks for getting Mavericks, etc. as I'm not computer savvy. I'm a songwriter who wants to write and record as simply as possible. My current set-up runs like a tank. GB iOS is great for getting ideas down when on the road. Then I flesh things out on the Mac in LP and add the audio tracks there as well.
    Anyone know a workaround for opening GB 2.0.1 iOS in LP9? I don't want the audio BTW, just the MIDI. I can find the audio by show package contents, etc. but I can't see the MIDI info in the folder. Maybe my OSX won't recognize as I could possibly do this manually? When I unpack a pre-2.0.1 GB file on the Mac, I can see both the audio and the MIDI, but not on the new GB ".band" file. Any thoughts or ideas are welcomed. Thank you!
    Mac Pro 1,1 June 2007
    2x Quad Core 2.66 Ghz Intel Xeon
    16 GB RAM
    2 HD's
    Logic Pro 9.1.8
    Snow Leopard 10.6.8

    Thank you! Can you please explain? Can I still record in GB iOS and then use the MIDI synth app? Where is the MIDI synth app - on the iPad or Mac?  How do I get the MIDI info to the Mac - by iRig MIDI or USB? Please break down the process if you can and I will try it. Looks like great idea, I just need a little more info. Thanks!

  • I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife.  I restored it to original factory conditions.  Now we cannot install iBook on it since it requires iOS 7.  What can we do with older iPADS that are still 100% functional.

    I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife.  I restored it to original factory conditions.  Now we cannot install iBook on it since it requires iOS 7.  What can we do with older iPADS that are still 100% functional except for the fact that you cannot updrade the iOS above version 5?

    Look at this similar problem in getting Netflix on an iPad 1. Same technique should work for you.
    https://discussions.apple.com/thread/5753106?tstart=30
     Cheers, Tom

  • How to restore files from Adobe Reader for iOS (iPad)?

    I started using Adobe Reader for iOS to annote and comment pdf files. I used the Adobe Reader for Mac OS to upload the files to the Acrobat.com cloud.
    Opening the files on iPad worked pretty straight forward and I started editing the pdf right away. When opening the pdf again a couple of days later on iPad, the app downloaded the pdf again in an older version with a couple of annotations present, but a couple of the more recent missing. This is a very disturbing behaviour since I cannot understand why it would sync an older version of the pdf from the cloud over the newer one. Luckily, this was no very important edit, but I will be very hesitant to use this feature in the future if there is a likelyhood for this happening again. Is there any possibility to recover the file with the original edits from the iPad?
    The second thing that I don't understand is the mismatch of files shown in the adobe creative cloud and on acrobat.com when using the acrobat reader. 2 of the files I uploaded can be seen in both the adobe creative cloud and in the 'acrobat.com' cloud (is that a different thing?) as can be accessed from adobe reader on Mac OS. However, there are also files that can be accessed exclusively from the adobe creative cloud and files that can be accessed exclusively from the 'acrobat.com' cloud. I don't really understand the difference and how to sync the two.
    Help is highly appreciated. Thanks!

    AnAppleADay,
    I personally agree that having two separate Adobe cloud storage services (Acrobat.com and Creative Cloud) is confusing and undesirable.  However, I am not able to speculate on Adobe products or services in future releases.
    There is no direct way to download files on Acrobat.com to your iPad/iPhone.  However, you can download files from Acrobat.com via the web browser interface (https://cloud.acrobat.com/files) on your Windows or Mac desktop/laptop computer.
    Then you can (a) email them to yourself and open them in Adobe Reader on your iPad, which results in storing the files locally on your iPad, or (b) use the desktop version of iTunes to transfer the files from your computer to your iPad.  (It's convoluted.  But I am not aware of any other options.)  However, if you uninstall Adobe Reader for iOS, the operating system will erase all of associated application data including locally stored PDF documents.
    I suspect that your problem is related to changes not being saved to Acrobat.com properly (not about syncing to an older version).  When you make a lot of changes to a PDF document (e.g adding annotations or filling out forms), I'd recommend closing the modified PDF document occasionally, which forces Adobe Reader to save the changes to Acrobat.com.  You will have less chance of losing changes due to unexpected problems or defects in Adobe Reader.
    Please let us know if you know the steps to reproduce the problem (of losing changes) with a particular file on Acrobat.com.  We can investigate the problem.
    Thank you.

  • HT1766 Updating iOS Software on an older iPad

    Can I update an older iPad with iOS 5 in order to utilize iCloud and the 'Find my iPad' app?
    I tried going under Settings>General, but do not see the 'Software Update' option.

    That only appears when you have iOS 5+ installed, you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
    You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • Just received a new Ipad Air, but IOS version is older than current IPad...can not load backup...How do I upgrade IOS version?

    Just received a new Ipad Air, but IOS version is older than current IPad...can not load backup...How do I upgrade IOS version?

    In order to upgrade the new Air 2, I had to select "set up as new" from the menu. So, after the IOS upgrade is done, how do I "restore" the data that is backed up on icloud from my old Ipad?  I don't see a menu item for that . . .
    Thanks

Maybe you are looking for