Two 5x7 on one sheet

How can I get iPhoto to print two 5x7 photos on one 8x11 sheet of photo paper. I can't seem to accomplish that simple task.

Select the photos, click print, select the printer, print size and pager size and click customize in the settings select print multiple prints on one page - your print preview will update to reflect the two prints - and click print again - make any printer specific settings and print
LN

Similar Messages

How can I print 2 5X7s on one sheet of 8.5X11?

I want to print one image as 2 5X7s on one sheet of 8.5X11 paper. In previous versions I could do this easily. Not so anymore. Here is my scenario. I use Windows 8 64 bit version 6.2 with Photoshop Elements 11.0. I use an Epson Stylus Photo 1400 and its print software.
I choose : File Print enter, Orientation Portrait enter, More Options-Border Thickness .118" enter, Change Settings-Advanced Settings-Premium Photo Paper Glossy_OK enter, Select Print Size 5X7 enter, Position-Uncheck Center-Top=0 enter. The image on the screen has shifted to the top with a .118 border and has crop marks on the other three sides. I print my picture, turn the sheet around and repeat the process. I have 2 5X7s of the same image on the sheet of paper. However, this version does not like to do this. It works sometimes, and sometimes not. I am wasting too much paper and ink trying to figure it out. The image on the screen always looks correct, showing a 5X7. The image that prints may be a 5.75"X5" or may be a 6"X5". The border at the top chages from .118" to .80"
I tried using Picture Package as suggested before. It will not set up to print only one picture, and does not allow me to set my borders. The image came out as a borderless 5X7.
Any suggestions will be greatly appreciated.

Barry5370 wrote:
I tried it. It worked pretty good.
It should work perfectly if you have cropped the picture precisely. How are you cropping, step-by-step?
Barry5370 wrote:
Now I need to figure out how to get the correct borders on the images. .
Once you have done Select>all, go to Edit>stroke>(outline) selection.
Enter the width for the stroke/outline in px (try 4px or 5px, experiment), select a color, and place it inside (to maintain 5x7 dimension).
Barry5370 wrote:
Thanks.
You're welcome. Let us know how you make out.

Print two photos on one sheet of photo paper officejet pro 8600 plus

I wish to print 2 photos on one sheet of photo paper. These are to fit into small frames and require 900 x 650 - two will fit on 6 x 4. When I go into my photo editor it shows the photo (I tried with one) at the top on the preview but the printer says it is not the correct size of paper. Thank you.
This question was solved.
View Solution.

Hi djf44,
I would like to help you with your printing issue. In your User Guide on page 44 is the steps for printing on photo paper. What is the program you are using to print the photo's from? You would have to make your picture(s) fit to the 4X6 photo size frame.
Let me know if this helped.
Thank you,
I worked on behalf of HP.

How can I put two photos in one 6x4 print??

Hello!! So I want to print out some of my photos for a scrapbook.
I however do not want them all to be 6x4 sized prints and making smaller ones (scrapbook prints) at the photo shops cost too much.
There HAS to be a way to just put two separate photos into one photo jpeg type file right? That way I can print them out normally and just cut them in half so some are smaller?
Any help?
Much appreciated!

Your question is not clear
do you want to
1 - put two separate photos into one photo jpeg type file
Or do you want to print two photos on one sheet of paper so you can
2 - can print them out normally and just cut them in half so some are smaller
For 1 you need an external editor - you can do it in pages for example
for 2 you simply select the two photos, crop them so they will fit and print selecting the printer, paper size and print size (slightly smaller than 3x4 since there needs to be a small border around them and between them), if the priview does not show two photos on the page click customize and in setting select multiple photos per page - the preview will reflect this selection and finish printing
LN

Two stylesheets in one page?

Confused here lol.
I want to create a page that has two stylesheets. One sheet is for the dropdown menu. The other is for a picture gallery. Looking at this page, it does seem as this can be achieved.How can this be done please?

Thanks SnaK.
Got that.
Got two problems now though. In the link below there's a dotted padded line if you click on the main image which I need to eliminate. I think this maybe some sort of container. Any idea how to reduce the white background as well please in the link below? Ideally Iwant it no larger than the gallery that it sits in. Been looking at the css gallerffic-2a sheet because I think there's a container surrounding the gallery that is the width of the wite background but still can't find out how to reduce it. Thanks for any help.
http://bajor.servers.rbl-mer.misp.co.uk/~sunridge/photob.htm

Want to put 2 pages on one sheet

Windows Adobe Acrobat 7.0 Professional
I have copied a camera manual as a .pdf file. The pages are small enough that I want to put two pages on one 8 1/2 x 11 sheet. When I have only one page per sheet, the image on the screen and on the printed page are full size. I can get two pages on one sheet: HOWEVER,the size of each printed page shrinks. The print is small and very hard to read, both on the screen and on the printed page.
I am new to Acrobat and there is probably an easy solution. I have tried a number of things with no success.
How do I keep each page full size when merging two pages?
_/\_ Dean

Not necessarily the cleanest, but you can print to a new PDF file. In the printer properties, select the page size, and multi-up option. You might also find that on the pdf printer menu (at least I have that on my AA8.1.2). You may still have to select the paper size, since it is different from the original.

Printing multiple copies of one photo on one sheet

Since I don't find this on the forum, I must be the only one who can't figure out how to do this, but before I upgraded, when selecting "print", I could also select how many photos per page, and I could print out one page with more than one copy of a photo. For example a whole sheet of wallet size, or two 5X7s on the same sheet. I can't find this selection option any more. Where is it?
Thanks,
Quonkeree

If you go back there is a solution (workaround) that as I remember involves picking the photo you wnat to print multiple copies of and other photos to bring the count up to what you want to print (2, 4, 9 etc) then somewhere down the way in the print process replacing the photos you used a placeholders with the one you want to print giving you multiple up of the same photo - I have NOT done this but it was described sometime recently on this forum - try a search
Larry Nebel

How to copy table from one sheet to another making formulas relative to current sheet

I'm truly sorry if this has been answered within this forum but I've been reading these posts for the last hour and nothing. Ok so here's my issue:
I'm trying to do a budget spreadsheet. My ss contains sheets with each one representing a month. So sheet 1 is called January, 2 February etc.
I have two table in each sheet, one with a list of expenses and the other is a subtable with that references the first table for special expenses. The second table is identical in functionality in each sheet so I do a copy from January into February. However, when I copy into Feburary, all my formulas still point to 'January::' and I have to go and remove the 'January::' from each cell.
Is there any way to copy the second table and make it relative to the sheet that it's in? It seems simple and maybe I'm doing something fundamentally wrong but I can't find the answer anywhere.

I made a simple version of what I think you are describing:
I gave each table a name "Tabl" and "SubTable"
SubTable cell A1 is assigned as follows:
A1=Table :: A1
Then I duplicated the January Sheet by highlighting the sheet and typing the key command <COMMAND>+d (or selceting the menu item "Edit > Duplicate"):
Then I change the name of the new shee from "January -1" to "February"
The relative reference should already exist.
You can confim this by changing the contants of the informaiton in cell A1 of Table in the "February sheet

How to combine two queries in one EXCEL

hi i got one requirement
i got one excel sheet from user which contains two report s(hoe we know whether it is worknook or not) of 2011 data and now user wants 2012 data .now i icluded jan 2012 to dec 2012 in two reports and sent to user.But user is asking these two reports want to see in one sheet.
so how can i proceed: if i go for work book how can i include these two reports in workbook and here my doubt is if i create a workbook based on these two querie which name i have to give user.Please help me out on the same.
Regards,
Madhu.

Hi Madhu
Run one query. Click on a empty space in the excel
From the BEx Design Toolbar -
>Insert Analysis Grid -
> Right click on the Design Item
Edit the DataProvider.....You can ran same or different query with selection.
Save the result
Check this link for detail....I am also searching for something with screenshot
Regards
Anindya
Edited by: Anindya Bose on Feb 14, 2012 3:04 AM

In my class i am suppose to do a before and after shot, how do i have two photos on one page

before and after shots..how do i put two photos on one page?? please help

Good day!
As Photoshop is not a page layout application but primarily image editing software the concept of "page" has limited relevance.
Anyway, you could increase the canvas (Image > Canvas Size) and place the other image (File > Place …) or drag and drop it.
Or create a new image and place both images. Whether doing so as Embedded or Linked Smart Objects makes more sense depends on your workflow, I guess.
File > Automate > Contact Sheet II would be another option.
Regards,
Pfaffenbichler

How can I copy a row from one sheet and paste it in a column in another sheet?

I would like to copy a row of numbers from one sheet and paste it into a column in another sheet. Is it possible to do this with numbers?

Hi Dennis,
Numbers doesn't have a built-in Paste Special > Transpose the way you have in Excel. However, there are ways to do this in Numbers that are not difficult.
Here are two ways:
Approach 1:
Select the row of numbers, and command-c to copy to the system clipboard.
Click on the canvas and command-v to paste, automatically creating a new table.
With that new table still selected, in your menu choose Table > Transpose Rows and Columns.
Select the cells in the transposed table, command-c to copy, click once in a cell of the destination column of your target table, and command-v to paste.
Approach 2: (after a quick installation, very similar to Excel's built-in Paste Special > Transpose)
Download this Copy Transpose Automator Service, and double-click to install (if necessary choosing Open Anyway in System Preferences > Security and Privacy).
Thereafter to use just:
select the row of numbers you want to copy
with the cells still selected, choose Copy Transpose from the Numbers > Services menu
click once in the destination column and command-v to paste the transposed values.
Note that the second approach does not handle cells with formulas, whereas the first approach will.
SG

Run two report in one Excel sheet1 and sheet2

Hi all;
I want to have my one report in sheet1 and another one in sheet2 when I opened my excel sheet. How can I perform this two report in one excel sheet. I can copy the report and paste but then there would be no drill down or other functionality.
thank. you.

Hi Krishma,
You can save this workbook to your PC and email it to your user. They need to open the workbook (with Bex running in Excel). When they click the refresh button they system will prompt them to log on (if they are already not logged in) and then the queries will be executed.
Hope this helps...

Printing Multiple images on one sheet of paper ( Printer Package)

I want to print multiple different images on one sheet of paper using PhotoShop 6 Printer Package, (operating system windows7 h/p) I have figured out how to get multiple images of the same image on one sheet, but not two different images.
I seen these instructions on the web and can do 1.2.3....4. has me lost. I think this may work for me, unless there is another method that is easier.
Important: Mac OS X users much first apply an update to Photoshop before attempting to customize the Picture Package layouts. Information and and a download link can be found at [url]http://www.adobe.com/support/downloads/[/url] (Thank you Matt Jones for this tip!)
Copy the next five lines and paste them into a text editor, like NotePad or SimpleText:
I 8 10
Letter (3) 4x6
0 0 6 4
0 4 4 6
4 4 4 6
Name this file FourBySixes.txt
Copy the file to your Adobe\Photoshop X.0\Presets\Layouts folder where X represents your version of Photoshop.
Open Photoshop and try it!
I copyed #3 and save to my documents, but I can't figure out how to do #4, or where the Adobe X.0\ Presets\Layout folder is at, if you could dumb this down for me I would be very grateful.
thanks

I can only guess that Photoshop 6 under Win7 would have the layouts under Program Files (x86)\Adobe\Photoshop 6\Presets or thereabouts. This is the Photoshop Elements forum, you may want to try the full Photoshop forum: http://forums.adobe.com/community/photoshop/photoshop_windows
Juergen

Stop printing multiple pages on one sheet

When printing from Acrobat or Reader, the print preview and settings show that I am printing a single page on one sheet of paper. However, it actually prints two pages side-by-side on one sheet of paper. How would I stop this? This is the only program that does this. I have checked all printing settings in all Adobe products as well as the printer settings in the device's properties. Your help is greatly appreciated.

It seems like an issue the with PostScript drivers installed on the machine. Did you install the latest version of PS Drivers on the customer's machine?
You can also check this:
Click on Advanced
Select PostScript options
Select Language Level 2
and then try.

How to create two respone for one request

Hi
is there any way for us to create two response for one request
the scenario is as below
1. user click on update button for particular record in the datatable (
after its get updated and status get updated = 'UPDATED' it will remove the object from ObjectListDataProvider and clear the tablePhaseListener ).
2. After it gets updated successfuly , i want to prompt the user with generateExcel function which using response.getOutputStream() using Apache POI.
How can we combine 1 and 2 together
Here what i have tried and didnt work
1. i tried to put the generateExcel function in destroy() method after page is rendered but it gives me Exception
2. i tried to put the generateExcel function in prerender() method
but the page will only execute the generateExcel function
- the data still get updated to the database but it doesnt refresh the page ( i meant the removing object and tablephaseListener.clear() doesnt work )
3 . i tried to put generateExcel Function after it process the data
public String updateData()
       //update data
       if(success){
            // prompt user to save excell sheet
        return null;
     }This one also doesnt work and gives the same behaviour as number 2
The Prompt to save excel sheet still gets popped up
but the page just doesnt get refreshed
Thanks
is anybody know the workaround?

yea i did set some alert message and clear the table by calling
provider.removeRow and commitChanges
it just doesnt reflected in the page that we see
by actually is already removing the row from the provider
Thanks

Two 5x7 on one sheet

Similar Messages

Maybe you are looking for